A Simple Synthetic Strategy toward Defect‐Rich Porous Monolayer NiFe‐Layered Double Hydroxide Nanosheets for Efficient Electrocatalytic Water Oxidation

In this work, porous monolayer nickel‐iron layered double hydroxide (PM‐LDH) nanosheets with a lateral size of ≈30 nm and a thickness of ≈0.8 nm are successfully synthesized by a facile one‐step strategy. Briefly, an aqueous solution containing Ni²⁺ and Fe³⁺ is added dropwise to an aqueous formamide solution at 80 °C and pH 10, with the PM‐LDH product formed within only 10 min. This fast synthetic strategy introduces an abundance of pores in the monolayer NiFe‐LDH nanosheets, resulting in PM‐LDH containing high concentration of oxygen and cation vacancies, as is confirmed by extended X‐ray absorption fine structure and electron spin resonance measurements. The oxygen and cation vacancies in PM‐LDH act synergistically to increase the electropositivity of the LDH nanosheets, while also enhancing H₂O adsorption and bonding strength of the OH* intermediate formed during water electrooxidation, endowing PM‐LDH with outstanding performance for the oxygen evolution reaction (OER). PM‐LDH offers a very low overpotential (230 mV) for OER at a current density of 10 mA cm^?2, with a Tafel slope of only 47 mV dec^?1, representing one of the best OER performance yet reported for a NiFe‐LDH system. The results encourage the wider utilization of porous monolayer LDH nanosheets in electrocatalysis, catalysis, and solar cells.     

NiFe Layered Double Hydroxide Nanoparticles on Co,N‐Codoped Carbon Nanoframes as Efficient Bifunctional Catalysts for Rechargeable Zinc–Air Batteries

The future large‐scale deployment of rechargeable zinc–air batteries requires the development of cheap, stable, and efficient bifunctional electrocatalysts for the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER). In this work, a highly efficient bifunctional electrocatalyst is prepared by depositing 3–5 nm NiFe layered double hydroxide (NiFe‐LDH) nanoparticles on Co,N‐codoped carbon nanoframes (Co,N‐CNF). The NiFe‐LDH/Co,N‐CNF electrocatalyst displayed an OER overpotential of 0.312 V at 10 mA cm^?2 and an ORR half‐wave potential of 0.790 V. The outstanding performance of the electrocatalyst is attributable to the high electrical conductivity and excellent ORR activity of Co,N‐CNF, together with the strong anchoring of 3–5 nm NiFe‐LDH nanoparticles, which preserves active sites. Inspired by the excellent OER and ORR performance of NiFe‐LDH/Co,N‐CNF, a prototype rechargeable zinc–air battery is developed. The battery exhibited a low discharge–charge voltage gap (1.0 V at 25 mA cm^?2) and long‐term cycling durability (over 80 h), and superior overall performance to a counterpart battery constructed using a mixture of IrO₂ and Pt/C as the cathode. The strategy developed here can easily be adapted to synthesize other bifunctional CNF‐based hybrid electrodes for ORR and OER, providing a practical route to more efficient rechargeable zinc–air batteries.     

Tuning Electronic Structure of NiFe Layered Double Hydroxides with Vanadium Doping toward High Efficient Electrocatalytic Water Oxidation

Binary NiFe layer double hydroxide (LDH) serves as a benchmark non‐noble metal electrocatalyst for the oxygen evolution reaction, however, it still needs a relatively high overpotential to achieve the threshold current density. Herein the catalyst's electronic structure is tuned by doping vanadium ions into the NiFe LDHs laminate forming ternary NiFeV LDHs to reduce the onset potential, achieving unprecedentedly efficient electrocatalysis for water oxidation. Only 1.42 V (vs reversible hydrogen electrode (RHE), ≈195 mV overpotential) is required to achieve catalytic current density of 20 mA cm^?2 with a small Tafel slope of 42 mV dec^?1 in 1 m KOH solution, which manifests the best of NiFe‐based catalysts reported till now. Electrochemical analysis and density functional theory +U simulation indicate that the high catalytic activity of NiFeV LDHs mainly attributes to the vanadium doping which can modify the electronic structure and narrow the bandgap thereby bring enhanced conductivity, facile electron transfer, and abundant active sites.     

Three‐Dimensional Smart Catalyst Electrode for Oxygen Evolution Reaction

A multifunctional catalyst electrode mimicking external stimuli–responsive property has been prepared by the in situ growth of nitrogen (N)‐doped NiFe double layered hydroxide (N–NiFe LDH) nanolayers on a 3D nickel foam substrate framework. The electrode demonstrates superior performance toward catalyzing oxygen evolution reaction (OER), affording a low overpotential of 0.23 V at the current density of 10 mA cm^?2, high Faradaic efficiency of ≈98%, and stable operation for >60 h. Meanwhile, the electrode can dynamically change its color from gray silver to dark black with the OER happening, and the coloration/bleaching processes persist for at least 5000 cycles, rendering it a useful tool to monitor the catalytic process. Mechanism study reveals that the excellent structural properties of electrode such as 3D conductive framework, ultra thickness of N–NiFe LDH nanolayer (≈0.8 nm), and high N‐doping content (≈17.8%) make significant contribution to achieving enhanced catalytic performance, while N–NiFe LDH nanolayer on electrode is the main contributor to the stimuli‐responsive property with the reversible extraction/insertion of electrons from/into N–NiFe LDH leading to the coloration/bleaching processes. Potential application of this electrode has been further demonstrated by integrating it into a Zn–air battery device to identify the charging process during electrochemical cycling.     

Hierarchically Structured 3D Integrated Electrodes by Galvanic Replacement Reaction for Highly Efficient Water Splitting

A NiFe‐based integrated electrode is fabricated by the spontaneous galvanic replacement reaction on an iron foam. Driven by the different electrochemical potentials between Ni and Fe, the dissolution of surface Fe occurs with electroless plating of Ni on iron foam with no need to access instrumentation and input energy. A facile cyclic voltammetry treatment is subsequently applied to convert the metallic NiFe to NiFeO_x . A series of analytical methods indicates formation of a NiFeO_x film of nanosheets on the iron foam surface. This hierarchically structured three dimensional electrode displays high activity and durability against water oxidation. In 1 m KOH, a current density of 1000 mA cm^?2 is achieved at an overpotential of only 300 mV. This method is readily extended to fabricate CoFe or NiCoFe‐based integrated electrodes for water oxidation. Phosphorization of the bimetallic oxide (NiFeO_x ) generates the bimetallic phosphide (NiFe‐P), which can act as an excellent electrocatalyst for hydrogen production in 1 m KOH. An alkaline electrolyzer is constructed using NiFeO_x and NiFe‐P coated iron foams as anode and cathode, which can realize overall water splitting with a current density of 100 mA cm^?2 at an overpotential of 630 mV.     

Ultrafine Metal Nanoparticles/N‐Doped Porous Carbon Hybrids Coated on Carbon Fibers as Flexible and Binder‐Free Water Splitting Catalysts

By employing in situ reduction of metal precursor and metal‐assisted carbon etching process, this study achieves a series of ultrafine transition metal‐based nanoparticles (Ni–Fe, Ni–Mo) embedded in N‐doped carbon, which are found efficient catalysts for electrolytic water splitting. The as‐prepared hybrid materials demonstrate outstanding catalytic activities as non‐noble metal electrodes rendered by the synergistic effect of bimetal elements and N‐dopants, the improved electrical conductivity, and hydrophilism. Ni/Mo₂C@N‐doped porous carbon (NiMo‐polyvinylpyrrolidone (PVP)) and NiFe@N‐doped carbon (NiFe‐PVP) produce low overpotentials of 130 and 297 mV at a current density of 10 mA cm^?2 as catalysts for hydrogen evolution reaction and oxygen evolution reaction, respectively. In addition, these binder‐free electrodes show long‐term stability. Overall water splitting is also demonstrated based on the couple of NiMo‐PVP||NiFe‐PVP catalyzer. This represents a simple and effective synthesis method toward a new type of nanometal–carbon hybrid electrodes.     

Highly Active Trimetallic NiFeCr Layered Double Hydroxide Electrocatalysts for Oxygen Evolution Reaction

The development of efficient and robust earth‐abundant electrocatalysts for the oxygen evolution reaction (OER) is an ongoing challenge. Here, a novel and stable trimetallic NiFeCr layered double hydroxide (LDH) electrocatalyst for improving OER kinetics is rationally designed and synthesized. Electrochemical testing of a series of trimetallic NiFeCr LDH materials at similar catalyst loading and electrochemical surface area shows that the molar ratio Ni:Fe:Cr = 6:2:1 exhibits the best intrinsic OER catalytic activity compared to other NiFeCr LDH compositions. Furthermore, these nanostructures are directly grown on conductive carbon paper for a high surface area 3D electrode that can achieve a catalytic current density of 25 mA cm^?2 at an overpotential as low as 225 mV and a small Tafel slope of 69 mV dec^?1 in alkaline electrolyte. The optimized NiFeCr catalyst is stable under OER conditions and X‐ray photoelectron spectroscopy, electron paramagnetic resonance spectroscopy, and elemental analysis confirm the stability of trimetallic NiFeCr LDH after electrochemical testing. Due to the synergistic interactions among the metal centers, trimetallic NiFeCr LDH is significantly more active than NiFe LDH and among the most active OER catalysts to date. This work also presents general strategies to design more efficient metal oxide/hydroxide OER electrocatalysts.     

NiFe‐Based Metal–Organic Framework Nanosheets Directly Supported on Nickel Foam Acting as Robust Electrodes for Electrochemical Oxygen Evolution Reaction

It is of great significance to develop highly efficient and superior stable oxygen evolution reaction (OER) electrocatalysts for upcoming electrochemical conversion technologies and clean energy systems. Here, an assembled 3D electrode is synthesized by a one‐step solvothermal process using such an original OER electrocatalyst. During the solvothermal process, Ni ions released from Ni foam in acidic solution and Fe ions added exogenously act as metal centers and coordinate with terephthalic acid (TPA) organic molecules by robust coordinate bonds, and finally, NiFe‐based metal–organic framework (MOF) nanosheets in situ grown on Ni foam, i.e., MIL‐53(FeNi)/NF, are prepared. This binder‐free 3D electrode shows superior OER activity with high current density (50 mA cm^?2) at an overpotential of 233 mV, a Tafel slope of 31.3 mV dec^?1, and excellent stability in alkaline aqueous solution (1 m KOH). It is discovered that introduction of Fe into MIL‐53 structure increases electrochemically‐active areas as well as reaction sites, accelerated electron transport capability, and modulated electronic structure to enhance catalytic performance. Besides, first principles calculations show that MIL‐53(FeNi) is more favorable for foreign atoms' adsorption and has increased 3d orbital electron density boosting intrinsic activity. This work elucidates a promising electrode for electrocatalysts and enriches direct application of MOF materials.     

Low‐Overpotential Electrocatalytic Water Splitting with Noble‐Metal‐Free Nanoparticles Supported in a sp3 N‐Rich Flexible COF

Covalent organic frameworks (COFs) are crystalline organic polymers with tunable structures. Here, a COF is prepared using building units with highly flexible tetrahedral sp³ nitrogens. This flexibility gives rise to structural changes which generate mesopores capable of confining very small (<2 nm sized) non‐noble‐metal‐based nanoparticles (NPs). This nanocomposite shows exceptional activity toward the oxygen‐evolution reaction from alkaline water with an overpotential of 258 mV at a current density of 10 mA cm^?2. The overpotential observed in the COF‐nanoparticle system is the best in class, and is close to the current record of ≈200 mV for any noble‐metal‐free electrocatalytic water splitting system—the Fe–Co–Ni metal‐oxide‐film system. Also, it possesses outstanding kinetics (Tafel slope of 38.9 mV dec^?1) for the reaction. The COF is able to stabilize such small‐sized NP in the absence of any capping agent because of the COF–Ni(OH)₂ interactions arising from the N‐rich backbone of the COF. Density‐functional‐theory modeling of the interaction between the hexagonal Ni(OH)₂ nanosheets and the COF shows that in the most favorable configuration the Ni(OH)₂ nanosheets are sandwiched between the sp³ nitrogens of the adjacent COF layers and this can be crucial to maximizing their synergistic interactions.     

Oriented Transformation of Co‐LDH into 2D/3D ZIF‐67 to Achieve Co–N–C Hybrids for Efficient Overall Water Splitting

Construction of well‐defined metal–organic framework precursor is vital to derive highly efficient transition metal–carbon‐based electrocatalyst for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) in water splitting. Herein, a novel strategy involving an in situ transformation of ultrathin cobalt layered double hydroxide into 2D cobalt zeolitic imidazolate framework (ZIF‐67) nanosheets grafted with 3D ZIF‐67 polyhedra supported on the surface of carbon cloth (2D/3D ZIF‐67@CC) precursor is proposed. After a low‐temperature pyrolysis, this precursor can be further converted into hybrid composites composed of ultrafine cobalt nanoparticles embedded within 2D N‐doped carbon nanosheets and 3D N‐doped hollow carbon polyhedra (Co@N‐CS/N‐HCP@CC). Experimental and density functional theory calculations results indicate that such composites have the advantages of a large number of accessible active sites, accelerated charge/mass transfer ability, the synergistic effect of components as well as an optimal water adsorption energy change. As a result, the obtained Co@N‐CS/N‐HCP@CC catalyst requires overpotentials of only 66 and 248 mV to reach a current density of 10 mA cm^?2 for HER and OER in 1.0 m KOH, respectively. Remarkably, it enables an alkali‐electrolyzer with a current density of 10 mA cm^?2 at a low cell voltage of 1.545 V, superior to that of the IrO₂@CC||Pt/C@CC couple (1.592 V).     

Alkali Etching of Layered Double Hydroxide Nanosheets for Enhanced Photocatalytic N2 Reduction to NH3

Layered double hydroxide (LDH) nanosheets show good activity in a wide range of photoreactions, with this activity being generally attributable to an abundance of surface oxygen vacancies or coordinatively unsaturated metal cations in the nanosheets which serve as active sites for reactant adsorption and activation. Recently, LDH nanosheets have been shown to be very effective for photocatalytic N₂ reduction to NH₃ using water as the reducing agent. Herein, it is demonstrated that a simple pretreatment of ZnCr‐LDH, ZnAl‐LDH, and NiAl‐LDH nanosheets with aqueous NaOH can greatly enhance the concentration of oxygen vacancies and low coordination metal centers in the nanosheets, thus significantly enhancing their photocatalytic activity for N₂ reduction to NH₃ under UV–vis irradiation (without the need for added sacrificial agents or cocatalysts). The facile alkali etching strategy introduced here is expected to be widely adopted in the future development of high‐performance LDH photocatalysts for ammonia production and other challenging chemical transformations (e.g., CO₂ reduction and water splitting).     

In Situ Formation of Co9S8 Quantum Dots in MOF‐Derived Ternary Metal Layered Double Hydroxide Nanoarrays for High‐Performance Hybrid Supercapacitors

Layered double hydroxides (LDHs) are promising cathode materials for supercapacitors because of the enhanced flow efficiency of ions in the interlayers. However, the limited active sites and monotonous metal species further hinder the improvement of the capacity performance. Herein, cobalt sulfide quantum dots (Co₉S₈‐QDs) are effectively created and embedded within the interlayer of metal‐organic‐frameworks‐derived ternary metal LDH nanosheets based on in situ selective vulcanization of Co on carbon fibers. The hybrid CF@NiCoZn‐LDH/Co₉S₈‐QD retains the lamellar structure of the ternary metal LDH very well, inheriting low transfer impedance of interlayer ions. Significantly, the selectively generated Co₉S₈‐QDs expose more abundant active sites, effectively improving the electrochemical properties, such as capacitive performance, electronic conductivity, and cycling stability. Due to the synergistic relationship, the hybrid material delivers an ultrahigh electrochemical capacity of 350.6 mAh g^?1 (2504 F g^?1) at 1 A g^?1. Furthermore, hybrid supercapacitors fabricated with CF@NiCoZn‐LDH/Co₉S₈‐QD and carbon nanosheets modified by single‐walled carbon nanotubes display an outstanding energy density of 56.4 Wh kg^?1 at a power density of 875 W kg^?1, with an excellent capacity retention of 95.3% after 8000 charge–discharge cycles. Therefore, constructing hybrid electrode materials by in situ‐created QDs in multimetallic LDHs is promising.     

Ruthenium Oxide Nanosheets for Enhanced Oxygen Evolution Catalysis in Acidic Medium

The fabrication of highly active and robust hexagonal ruthenium oxide nanosheets for the electrocatalytic oxygen evolution reaction (OER) in an acidic environment is reported. The ruthenate nanosheets exhibit the best OER activity of all solution‐processed acid medium electrocatalysts reported to date, reaching 10 mA cm^?2 at an overpotential of only ≈255 mV. The nanosheets also demonstrate robustness under harsh oxidizing conditions. Theoretical calculations give insights into the OER mechanism and reveal that the edges are the origin of the high OER activity of the nanosheets. Moreover, the post OER analyses indicate, apart from coarsening, no observable change in the morphology of the nanosheets or oxidation states of ruthenium during the electrocatalytic process. Therefore, the present investigation suggests that ruthenate nanosheets are a promising acid medium OER catalyst with application potential in proton exchange membrane electrolyzers and beyond.     

Unprecedented Synthesis of Holey 2D Layered Double Hydroxide Nanomesh for Enhanced Oxygen Evolution

Creating nanosized pores in 2D materials can increase the edge sites, improve the mass transfer, and contribute to different physical properties, which shows potential applications in many fields including filtration membranes, electronics and energy storage devices, and catalysts. An iconic member of this type of material is porous graphene. Herein, a unique 2D layered double hydroxide (LDH) nanomesh is designed and synthesized as a new class of 2D holey materials. It represents the first case of exfoliation method for preparing 2D holey materials among all published reports. As an oxygen evolution reaction electrocatalyst, the 2D CoCo‐LDH nanomesh has apparently lower onset overpotential (220 mV) than that of compact nanosheets without holes (270 mV) owing to the pores through the plane that offer more highly active edge sites with lower coordination number and promote the mass diffusion. This work opens up a new avenue for designing 2D porous materials for energy conversion and storage.     

Hydrous RuO2‐Decorated MXene Coordinating with Silver Nanowire Inks Enabling Fully Printed Micro‐Supercapacitors with Extraordinary Volumetric Performance

The fabrication of fully printable, flexible micro‐supercapacitors (MSCs) with high energy and power density remains a significant technological hurdle. To overcome this grand challenge, the 2D material MXene has garnered significant attention for its application, among others, as a printable electrode material for high performing electrochemical energy storage devices. Herein, a facile and in situ process is proposed to homogeneously anchor hydrous ruthenium oxide (RuO₂) nanoparticles on Ti₃C₂T_x MXene nanosheets. The resulting RuO₂@MXene nanosheets can associate with silver nanowires (AgNWs) to serve as a printable electrode with micrometer‐scale resolution for high performing, fully printed MSCs. In this printed nanocomposite electrode, the RuO₂ nanoparticles contribute high pseudocapacitance while preventing the MXene nanosheets from restacking, ensuring an effective ion highway for electrolyte ions. The AgNWs coordinate with the RuO₂@MXene to guarantee the rheological property of the electrode ink, and provide a highly conductive network architecture for rapid charge transport. As a result, MSCs printed from the nanocomposite inks demonstrate volumetric capacitances of 864.2 F cm^?3 at 1 mV s^?1, long‐term cycling performance (90% retention after 10 000 cycles), good rate capability (304.0 F cm^?3 at 2000 mV s^?1), outstanding flexibility, remarkable energy (13.5 mWh cm^?3) and power density (48.5 W cm^?3).     

Boronization‐Induced Ultrathin 2D Nanosheets with Abundant Crystalline–Amorphous Phase Boundary Supported on Nickel Foam toward Efficient Water Splitting

The conversion of crystalline metal–organic frameworks (MOFs) into metal compounds/carbon hybrid nanocomposites via pyrolysis provides a promising solution to design electrocatalysts for electrochemical water splitting. However, pyrolyzing MOFs generally involves a complex high‐temperature treatment, which can destroy the coordinated surroundings within MOFs, and as a result not taking their full advantage of their electrolysis properties. Herein, a simple and room‐temperature boronization strategy is developed to convert nickel zeolite imidazolate framework (Ni‐ZIF) nanorods into ultrathin Ni‐ZIF/Ni? B nanosheets with abundant crystalline–amorphous phase boundaries. The combined experiment, and theoretical calculation results disclose that the ultrathin thickness allows fast electron transfer and ensures increased exposure of surface coordinatively unsaturated active sites while the crystalline–amorphous interface elaborately changes the potential‐determining step to energetically favorable intermediates. As a result, Ni‐ZIF/Ni? B nanosheets supported on nickel foam (NF) require overpotentials of 67 mV for the hydrogen evolution reaction and 234 mV for the oxygen evolution reaction to achieve a current density of 10 mA cm^?2. Remarkably, Ni‐ZIF/Ni? B@NF as a bifunctional electrocatalyst for overall water splitting enables an alkaline electrolyzer with 10 mA cm^?2 at an ultralow cell voltage of 1.54 V. The present work may open a new avenue to the design of MOF‐derived composites for electrocatalysis.     

Self‐Limited on‐Site Conversion of MoO3 Nanodots into Vertically Aligned Ultrasmall Monolayer MoS2 for Efficient Hydrogen Evolution

MoS₂ has emerged as a promising alternative electrocatalyst for the hydrogen evolution reaction (HER) due to high intrinsic per‐site activity on its edge sites and S‐vacancies. However, a significant challenge is the limited density of such sites. Reducing the size and layer number of MoS₂ and vertically aligning them would be an effective way to enrich and expose such sites for HER. Herein, a facile self‐limited on‐site conversion strategy for synthesizing monolayer MoS₂ in a couple of nanometers which are highly dispersed and vertically aligned on 3D porous carbon sheets is reported. It is discovered that the preformation of well‐dispersed MoO₃ nanodots in 1–2 nm as limited source is the key for the fabrication of such an ultrasmall MoS₂ monolayer. As indicated by X‐ray photoelectron spectroscopy and electron spin resonance data, these ultrasmall MoS₂ monolayers are rich in accessible S‐edge sites and vacancies and the smaller MoS₂ monolayers the more such sites they have, leading to enhanced electrocatalytic activity with a low overpotential of 126 mV at 10 mA cm^?2 and 140 mV at 100 mA mg^?1 for HER. This state‐of‐the‐art performance for MoS₂ electrocatalysts enables the present strategy as a new avenue for exploring well‐dispersed ultrasmall nanomaterials as efficient catalysts.     

Three Dimensional Carbon Nanosheets as a Novel Catalyst Support for Enzymatic Bioelectrodes

A high performance laccase‐based biofuel cell cathode is developed using carbon nanosheets (CNS) as the catalyst support and buckypaper (BP) as the substrate electrode. Compared to multiwalled carbon nanotube (MWNT)‐based electrodes, CNS‐based electrodes exhibit better electrochemical properties for the oxygen reduction reaction (ORR) under biologically relevant conditions. It is shown that CNSs are conformally coated on the nanotubule bundles within the BP and that laccase is intimately attached to the CNS‐BP. Electrochemical characterization is carried out to derive the kinetic parameters of the ORR at the laccase‐CNS‐BP cathode. The laccase‐CNS‐BP exhibits a steep ORR cathodic wave with a Tafel slope of 19 mV decade^‐1. The onset potential obtained for laccase ORR at CNS‐BP is 20 mV higher than that of the MWNT‐based electrodes, and the laccase‐CNS‐BP cathode has a higher current density than MWNT electrodes.     

Efficient Photocatalytic Nitrogen Fixation over Cuδ+‐Modified Defective ZnAl‐Layered Double Hydroxide Nanosheets

The photocatalytic reduction of nitrogen (N₂) with water (H₂O) as the reducing agent holds great promise as a sustainable future technology for the synthesis of ammonia (NH₃). Herein, the effect of oxygen vacancies and electron‐rich Cu^δ+ on the performance of zinc‐aluminium layered double hydroxide (ZnAl‐LDH) nanosheet photocatalysts for N₂ reduction to NH₃ under UV–vis excitation is systematically explored. Results show that a 0.5%‐ZnAl‐LDH nanosheet photocatalyst (containing 0.5 mol% Cu by metal basis) affords a remarkable NH₃ production rate of 110 µmol g^?1 h^?1 and excellent stability in pure water. The X‐ray absorption spectroscopy, electron paramagnetic resonance, and density functional theory calculations reveal that Cu addition imparts oxygen vacancies and coordinatively unsaturated Cu^δ+ (δ < 2) with electron‐rich property in the ZnAl‐LDH nanosheets, both of which readily contribute to efficient separation and transfer of photogenerated electrons and holes and promote N₂ adsorption, thereby both activating N₂ and facilitating its multielectrons reduction to NH₃.     

Dual‐Functional N Dopants in Edges and Basal Plane of MoS2 Nanosheets Toward Efficient and Durable Hydrogen Evolution

Herein, the authors explicitly reveal the dual‐functions of N dopants in molybdenum disulfide (MoS₂) catalyst through a combined experimental and first‐principles approach. The authors achieve an economical, ecofriendly, and most efficient MoS₂‐based hydrogen evolution reaction (HER) catalyst of N‐doped MoS₂ nanosheets, exhibiting an onset overpotential of 35 mV, an overpotential of 121 mV at 100 mA cm^?2 and a Tafel slope of 41 mV dec^?1. The dual‐functions of N dopants are (1) activating the HER catalytic activity of MoS₂ S‐edge and (2) enhancing the conductivity of MoS₂ basal plane to promote rapid charge transfer. Comprehensive electrochemical measurements prove that both the amount of active HER sites and the conductivity of N‐doped MoS₂ increase as a result of doping N. Systematic first‐principles calculations identify the active HER sites in N‐doped MoS₂ edges and also illustrate the conducting charges spreading over N‐doped basal plane induced by strong Mo 3d –S 2p –N 2p hybridizations at Fermi level. The experimental and theoretical research on the efficient HER catalysis of N‐doped MoS₂ nanosheets possesses great potential for future sustainable hydrogen production via water electrolysis and will stimulate further development on nonmetal‐doped MoS₂ systems to bring about novel high‐performance HER catalysts.