Cation-Anion Balance during Potassium and Sodium Absorption by Barley Roots

Steady-state rates of potassium ion and sodium ion absorption by excised barley roots accompanied by various anions were compared with the rates of anion absorption and the concomitant H⁺ and base release by the roots. The cation absorption rates were found to be independent of the identities, concentrations, and rates of absorption of the anions of the external solution, including bicarbonate. Absorption of the anion of the salt plus bicarbonate could not account for the cation absorption. H⁺ is released during cation absorption and base during anion absorption. The magnitude by which one or the other predominates depends on the relative rates of anion and cation absorption under various conditions of pH, cation and anion concentration, and inhibitor concentrations. The conclusion is that potassium and sodium ions are absorbed independently of the anions of the absorption solution in exchange for H⁺, while anions are exchanged for a base. The H⁺ release reflects a specificity between K⁺ and Na⁺ absorption such that it appears to be H⁺ exchanged in the specific rate-limiting reactions of the cation absorption.     

New Insights to Self‐Aggregation in Ionic Liquid Electrolytes for High‐Energy Electrochemical Devices

Some cations of ionic liquids (ILs) of interest for high‐energy electrochemical storage devices, such as lithium batteries and supercapacitors, have a structure similar to that of surfactants. For such, it is very important to understand if these IL cations tend to aggregate like surfactants since this would affect the ion mobility and thus the ionic conductivity. The aggregation behaviour of ILs consisting of the bis(trifluoromethanesulfonyl)imide anion and different N‐alkyl‐N‐methyl‐pyrrolidinium cations, with the alkyl chain varied from C₃H₇ to C₈H₁₇, was extensively studied with NMR and Raman methods, also in the presence of Li⁺ cations. ²H NMR spin‐lattice and spin‐spin relaxation rates were analyzed by applying the “two step” model of surfactant dynamics. Here we show that, indeed, the cations in these ILs tend to form aggregates surrounded by the anions. The effect is even more pronounced in the presence of dissolved lithium cations.     

Metal–Organic Frameworks‐Derived Tunnel Structured Co3(PO4)2@C as Cathode for New Generation High‐Performance Al‐Ion Batteries

Despite great progress in aluminum ion batteries (AIBs), the commercialization and performance improvement of AIBs‐based carbon cathodes is greatly impeded by sluggish intercalation/extraction and redox kinetics due to large‐sized AlCl₄^? anions. Phosphates with tunnel channels and much larger d‐spacing than the radius of Al³⁺ could be an alternative candidate as a cathode for potential high‐performance AIBs. Herein, elaborately designed porous tunnel structured Co₃(PO₄)₂@C composites derived from ZIF‐67 as AIBs cathodes are demonstrated, showing increased active sites, high ionic mobility, and high Al³⁺ ion diffusion coefficient, leading to remarkably enhanced discharge–charge redox reaction kinetics. Furthermore, the carbon shell and porous structure performs as armor to alleviate volume change and maintain the structure integrity of the cathodes. As expected, the rationally constructed Co₃(PO₄)₂@C composite exhibits a superior capacity of 111 mA h g^?1 at a high current density of 6 A g^?1 and 151 mA h g^?1 at 2 A g^?1 after 500 cycles with capacity decay of 0.02% per cycle. This innovative strategy could be a big step forward for long‐term cycle stable AIBs and reveals significant insights into the redox reaction mechanism for high‐performance AIBs based on Al³⁺ rather than large‐sized AlCl₄^?.     

Characterization of native and reconstituted plasma membrane H+-ATPase from the plasma membrane ofBeta vulgaris

Summary Characteristics of the native and reconstituted H⁺-ATPase from the plasma membrane of red beet (Beta vulgaris L.) were examined. The partially purified, reconstituted H⁺-ATPase retained characteristics similar to those of the native plasma membrane H⁺-ATPase following reconstitution into proteoliposomes. ATPase activity and H⁺ transport of both enzymes were inhibited by vanadate, DCCD, DES and mersalyl. Slight inhibition of ATPase activity associated with native plasma membranes by oligomycin, azide, molybdate or NO ₃ ^– was eliminated during solubilization and reconstitution, indicating the loss of contaminating ATPase activities. Both native and reconstituted ATPase activities and H⁺ transport showed a pH optimum of 6.5, required a divalent cation (Co²⁺>Mg²⁺>Mn²⁺>Zn²⁺>Ca²⁺), and preferred ATP as substrate. The Mg:ATP kinetics of the two ATPase activities were similar, showing simple Michaelis-Menten kinetics. Saturation occurred between 3 and 5mM Mg: ATP, with aK _m of 0.33 and 0.46mM Mg: ATP for the native and reconstituted enzymes, respectively. The temperature optimum for the ATPase was shifted from 45 to 35°C following reconstitution. Both native and reconstituted H⁺-ATPases were stimulated by monovalent ions. Native plasma membrane H⁺-ATPase showed an order of cation preference of K⁺>NH ₄ ⁺ >Rb⁺>Na⁺>Cs⁺>Li⁺>choline⁺. This basic order was unchanged following reconstitution, with K⁺, NH ₄ ⁺ , Rb⁺ and Cs⁺ being the preferred cations. Both enzymes were also stimulated by anions although to a lesser degree. The order of anion preference differed between the two enzymes. Salt stimulation of ATPase activity was enhanced greatly following reconstitution. Stimulation by KCl was 26% for native ATPase activity, increasing to 228% for reconstituted ATPase activity. In terms of H⁺ transport, both enzymes required a cation such as K⁺ for maximal transport activity, but were stimulated preferentially by Cl^– even in the presence of valinomycin. This suggests that the stimulatory effect of anions on enzyme activity is not simply as a permeant anion, dissipating a positive interior membrane potential, but may involve a direct anion activation of the plasma membrane H⁺-ATPase.     

Electrical properties of water: a new insight

New insight into the electrical properties of liquid water, from a standpoint of the physics of electrolytes, is proposed. The dielectric spectrum of water at frequencies 10⁴–10¹¹ Hz is described by a simple diffusional model taking into account the electrophoretic and relaxation effects inherent in electrolytes. The static dielectric permittivity and microwave absorption are derived from diffusion of Coulomb interacting H₃O⁺ and OH^? ions instead of orientational motion of H₂O molecules. The drift component of diffusion provides the proton dc-conductivity. Ion concentration is found to be 7 orders of magnitude higher than commonly accepted (～1% of the total concentration of H₂O molecules). The findings refer to the basic properties of water and therefore can be the key to solving the water-related problems.     

Anion Doping: A New Strategy for Developing High‐Performance Perovskite‐Type Cathode Materials of Solid Oxide Fuel Cells

Overcoming the sluggish activity of cathode materials is critical to realizing the wide‐spread application of intermediate‐temperature solid oxide fuel cells. Herein, a new way is reported to tune the performance of perovskite‐type materials as oxygen reduction electrodes by embedding anions (F^?) in oxygen sites. The obtained perovskite oxyfluorides SrFeO_{3?σ ?δ} F_σ and SrFe_0.9Ti_0.1O_{3?σ ?δ} F_σ (σ = 0.05 and 0.10) show improved electrocatalytic activity compared to their parent oxides, achieving area specific resistance values of 0.875, 0.393, and 0.491 Ω cm² for SrFeO_3?δ , SrFeO_2.95?δ F_0.05, and SrFeO_2.90?δ F_0.10, respectively, at 600 °C in air. Such improved performance is a result of the improved bulk diffusion and surface exchange properties due to anion doping. Moreover, favorable stability in performance is also demonstrated for the F^? anion‐doped perovskites as oxygen reduction electrodes at 650 °C for a test period of ≈200 h. A combination of anion doping and cation doping may provide a highly attractive strategy for the future development of cathode materials.     

Electron acceptors of bacterial photosynthetic reaction centers II. H+ binding coupled to secondary electron transfer in the quinone acceptor complex

The photoreduction of ubiquinone in the electron acceptor complex (Q₁Q₁₁) of photosynthetic reaction centers from Rhodopseudomonas sphaeroides, R26, was studied in a series of short, saturating flashes. The specific involvement of H⁺ in the reduction was revealed by the pH dependence of the electron transfer events and by net H⁺ binding during the formation of ubiquinol, which requires two turnovers of the photochemical act. On the first flash Q₁₁ receives an electron via Q₁ to form a stable ubisemiquinone anion (Q?^?₁₁); the second flash generates Q?^?₁. At low pH the two semiquinones rapidly disproportionate with the uptake of 2 H⁺, to produce Q₁₁H₂. This yields out-of-phase binary oscillations for the formation of anionic semiquinone and for H⁺ uptake. Above pH 6 there is a progressive increase in H⁺ binding on the first flash and an equivalent decrease in binding on the second flash until, at about pH 9.5, the extent of H⁺ binding is the same on all flashes. The semiquinone oscillations, however, are undiminished up to pH 9. It is suggested that a non-chromophoric, acid-base group undergoes a pK shift in response to the appearance of the anionic semiquinone and that this group is the site of protonation on the first flash. The acid-base group, which may be in the reaction center protein, appears to be subsequently involved in the protonation events leading to fully reduced ubiquinol. The other proton in the two electron reduction of ubiquinone is always taken up on the second flash and is bound directly to Q?^?₁₁. At pH values above 8.0, it is rate limiting for the disproportionation and the kinetics, which are diffusion controlled, are properly responsive to the prevailing pH. Below pH 8, however, a further step in the reaction mechanism was shown to be rate limiting for both H⁺ binding electron transfer following the second flash.     

Active ion uptake and maintenance of cation-anion balance: A critical examination of their role in regulating rhizosphere pH

The processes responsible for maintenance of cation-anion balance in plants and their relation to active ion accumulation and changes in rhizosphere pH are outlined and discussed. The major processes involved are: (1) accumulation and degradation of organic acids which occur in the plant mainly as organic acid anions (and their transfer within the plant) and (2) extrusion of H⁺ or OH^– into the rhizosphere. The relative importance of the two processes is determined by the size of the excess anion or cation uptake. Indeed, plants typically absorb unequal quantities of nutritive cations (NH₄ ⁺+Ca²⁺+ Mg²⁺+K⁺+Na⁺) and anions (NO₃ ^–+Cl^–+SO₄ ^2–+H₂PO₄ ^–) and charge balance is maintained by excretion of an amount of H⁺ or OH^– which is stoichiometrically equal to the respective excess cation or anion uptake. The mechanisms and processes by which H⁺ and in particular OH^– ions are excreted in response to unequal cation-anion uptake are, however, poorly understood.The contemporary view is that primary active extrusion of H⁺, catalyzed by a membrane-located ATPase, is the major driving force for secondary transport of cations and anions across the plasma membrane. However, the fact that net OH^– extrusion often occurs (since excess anion absorption commonly takes place) implies there is a yet-to-be characterized OH^– ion efflux mechanism at the plasma membrane that is associated with anion uptake. There is, therefore, a need for future studies of the uptake mechanisms and stoichiometry of anion uptake; particularly that of NO₃ ^– which is often the predominant anion absorbed. Another related phenonenon which requires detailed study in terms of cation-anion balance is localized rhizosphere acidification which can occur in response to deficiencies of Fe and P.     

Leaching of solutes by the action of acidic rain: a comparison of efflux from twigs and single needles of Picea abies (L. Karst.)

Abstract. Leaching of inorganic cations (K⁺, Mg²⁺) and in some cases of inorganic anions and sugars from detached twigs and single needles of spruce Picea abies L. Karst.) in the presence of acid rain (H₂SO₄, 1 mol m^?3) or salt solutions (Na₂ SO₄, 1 mol m^?3) was examined under laboratory conditions. Cation leaching (as percentage of the total water soluble ion content of the tissue per hour) was: K⁺: 0.01-0.02%; Mg²⁺: 0.005-0.01%; Ca²⁺: 0.1-0.2%. Leaching rates of anions were even lower than that and concentrations in the leachate were often below the detection limit of anion chromatography. Spraying with H₂SO₄ (pH 2.95, 1 mol m^?3) increased leaching only transiently. Similar effects were found when Na₂SO₄ was used instead of H₂SO₄. The transiently enhanced leaching was apparently due to H⁺/cation or cation/cation exchange at the twig or leaf surfaces. Feeding of K⁺ or Al³⁺ through the stems increased leaching of all cations within a few hours, again demonstrating rapid ion exchange in the apoplast. Leaching of potassium and magnesium from single needles occurred at similar relative rates as from twigs. Loss of Ca²⁺ ions, however, was even smaller from needles than from twigs. Apparently, a large part of the Ca²⁺ lost from twigs originated from the bark and not from the needles. Efflux of ions from longitudinal needle sections was about 1000 times taster than the rates obtained with intact needles, indicating that the cuticle was the main barrier Preventing solute loss. In relation to the total amount of mineral nutrients in trees, leaching is considered to be too small to be the primary cause of damage to trees stressed by acid rain, as has been suggested in the literature.     

Synthesis and biodistribution of [11C]A-836339, a new potential radioligand for PET imaging of cannabinoid type 2 receptors (CB2)

Recently, A-836339 [2,2,3,3-tetramethylcyclopropanecarboxylic acid [3-(2-methoxyethyl)-4,5-dimethyl-3H-thiazol-(2Z)-ylidene]amide] (1) was reported to be a selective CB₂ agonist with high binding affinity. Here we describe the radiosynthesis of [¹¹C]A-836339 ([¹¹C]1) via its desmethyl precursor as a candidate radioligand for imaging CB₂ receptors with positron-emission tomography (PET). Whole body and the regional brain distribution of [¹¹C]1 in control CD1 mice demonstrated that this radioligand exhibits specific uptake in the CB₂-rich spleen and little specific in vivo binding in the control mouse brain. However, [¹¹C]1 shows specific cerebral uptake in the lipopolysaccharide (LPS)-induced mouse model of neuroinflammation and in the brain areas with Aβ amyloid plaque deposition in a mouse model of Alzheimer’s disease (APPswe/PS1dE9 mice). These data establish a proof of principle that CB₂ receptors binding in the neuroinflammation and related disorders can be measured in vivo.     

Anion–Cation Double Substitution in Transition Metal Dichalcogenide to Accelerate Water Dissociation Kinetic for Electrocatalysis

Until now, many works have shown that the hydrogen evolution reaction (HER) performance can be improved by anion or cation substitution into the crystal lattice of pyrite‐structure materials. However, the synergistic effects of anion–cation double substitution for overall enhancement of the catalytic activity remains questionable. Here, the simultaneous incorporation of vanadium and phosphorus into the CoS₂ moiety for preparing 3D mesoporous cubic pyrite‐metal Co_1‐xV_xSP is presented. It is demonstrated that the higher catalytic activity of CoS₂ after V incorporation can be primarily attributed to abundance active sites, whereas P substitution is responsible for improving HER kinetics and intrinsic catalyst. Interestingly, due to the synergistic effect of P–V double substitution, the 3D Co_1‐xV_xSP shows superior electrocatalysis toward the HER with a very small overpotential of 55 mV at 10 mA cm^?2, a small Tafel slope of 50 mV dec^?1, and a high turnover frequency of 0.45 H₂ s^?1 at 10 mA cm^?2, which is very close to commercial 20% Pt/C. Density functional theory calculation reveals that the superior catalytic activity of the 3D Co_1‐xV_xSP is contributed by the reduced kinetic energy barrier of rate‐determining HER step as well as the promotion of the desorption H₂ gas process.     

Anion recognition properties of 2,2′-bipyridine derivative receptors containing phenol group

A series of artificial 2,2′-bipyridine receptors (1, 2, 3) containing phenol group have been designed and synthesized. Their anion-binding properties are evaluated for various anions (F^?, Cl^?, Br^?, I^?, AcO^? and H₂PO₄^?) by UV-vis titration experiment in order to research the impact of different substituents on anion-recognition properties. Results indicate that the anion binding abilities can be tuned by electron push-pull properties of substituents on the phenyl ortho- or para-position of the receptors. In addition, receptor 1 is sensitive for F^? detection without the interference of other studied anions, and receptors 2 and 3 are sensitive for H₂PO₄^? detection.     

The Synergistic Effect of Cation and Anion of an Ionic Liquid Additive for Lithium Metal Anodes

Lithium metal anodes are steadily gaining more attention, as their superior specific capacities and low redox voltage can significantly increase the energy density of rechargeable batteries far beyond those of current Li‐ion batteries. Nonetheless, the relevant technology is still in a premature research stage mainly due to the uncontrolled growth of Li dendrites that ceaselessly cause unwanted side reactions with electrolyte. In order to circumvent this shortcoming, herein, an ionic liquid additive, namely, 1‐dodecyl‐1‐methylpyrrolidinium (Pyr1(12)⁺) bis(fluorosulfonyl)imide (FSI^?), for conventional electrolyte solutions is reported. The Pyr1(12)⁺ cation with a long aliphatic chain mitigates dendrite growth via the combined effects of electrostatic shielding and lithiophobicity, whereas the FSI^? anion can induce the formation of rigid solid–electrolyte interphase layers. The synergy between the cation and anion significantly improves cycling performance in asymmetric and symmetric control cells and a full cell paired with an LiFePO₄ cathode. The present study provides a useful insight into the molecular engineering of electrolyte components by manipulating the charge and structures of the involved molecules.     

AtALMT12 represents an R‐type anion channel required for stomatal movement in Arabidopsis guard cells

Stomatal pores formed by a pair of guard cells in the leaf epidermis control gas exchange and transpirational water loss. Stomatal closure is mediated by the release of potassium and anions from guard cells. Anion efflux from guard cells involves slow (S‐type) and rapid (R‐type) anion channels. Recently the SLAC1 gene has been shown to encode the slow, voltage‐independent anion channel component in guard cells. In contrast, the R‐type channel still awaits identification. Here, we show that AtALMT12, a member of the aluminum activated malate transporter family in Arabidopsis, represents a guard cell R‐type anion channel. AtALMT12 is highly expressed in guard cells and is targeted to the plasma membrane. Plants lacking AtALMT12 are impaired in dark‐ and CO₂‐induced stomatal closure, as well as in response to the drought‐stress hormone abscisic acid. Patch‐clamp studies on guard cell protoplasts isolated from atalmt12 mutants revealed reduced R‐type currents compared with wild‐type plants when malate is present in the bath media. Following expression of AtALMT12 in Xenopus oocytes, voltage‐dependent anion currents reminiscent to R‐type channels could be activated. In line with the features of the R‐type channel, the activity of heterologously expressed AtALMT12 depends on extracellular malate. Thereby this key metabolite and osmolite of guard cells shifts the threshold for voltage activation of AtALMT12 towards more hyperpolarized potentials. R‐Type channels, like voltage‐dependent cation channels in nerve cells, are capable of transiently depolarizing guard cells, and thus could trigger membrane potential oscillations, action potentials and initiate long‐term anion and K⁺ efflux via SLAC1 and GORK, respectively.     

A Monte Carlo simulation study to predict the solubility of H2S in ionic liquids with 1-butyl-3-methylimidazolium ([C4mim+]) cation and tetrafluoroborate ([BF4−]), hexaflorophosphate ([PF6−]) and bis(trifluoromethanesulfonyl)amide ([Tf2N−]) anions

The solubilities of H₂S in ionic liquids, 1-butyl-3-methylimidazolium tetrafluoroborate ([C₄mim⁺][BF₄^?]), 1-butyl-3-methylimidazolium hexaflorophosphate ([C₄mim⁺][PF₆^?]) and -butyl-3-methylimidazolium tetrafluoroborate bis(trifluoromethanesulphonyl)amide ([C₄mim⁺][Tf₂N^?]) are predicted using isothermal–isobaric Gibbs ensemble Monte Carlo method (NPT-GEMC) at temperatures ranging from 333 to 453 K and pressure up to 20 bar. The low pressure points (up to 3 bar) of the absorption isotherms are fitted to a straight line to get a rough estimation of the Henry’s law constants. The van’t Hoff relationship is used to estimate the partial molar enthalpy of the absorption. The obtained results are in a good agreement with Jou and Mather [18], and Jalili et al. [13]. When comparing the solubility in ILs, it is found that H₂S solubility is highest for [C₄mim⁺][Tf₂N^?], followed by [C₄mim⁺][PF₆^?]. The lowest solubility is observed in [C₄mim⁺][BF₄^?]. The highest solubility in [C₄mim⁺][Tf₂N^?] is consistent with Jalili et al. [13]. However, their results indicate slightly higher solubility in [C₄mim⁺][BF₄^?] than in [C₄mim⁺][PF₆^?], and do not agree with the predictions. Upon absorption, the molar volumes of the mixtures decrease linearly, showing only small changes in volume. The effect of H₂S absorption on ILs is further studied by calculating the radial distribution functions between the ions. The results indicate that the solute molecules accommodate themselves in the cavities without significantly disturbing the ionic arrangement of the ions, similar to CO₂ absorption in ILs. The spatial distribution functions show similar spatial distribution for H₂S around cation in all of the studied ILs, whereas the distribution around anion depends on the shape and flexibility of the anion. The mechanism of H₂S absorption is studied by computing the van der Waals (VDW) and electrostatic (ELEC) energies. It is observed that the solubility of H₂S in the studied ILs is primarily controlled by VDW interaction. When comparing the interaction of H₂S with the ions, it is found that solute molecules interact with cations mainly due to VDW interaction. Both VDW and ELEC energies contribute in the interaction between H₂S and anions.     

Surface Engineering of 3D Gas Diffusion Electrodes for High‐Performance H2 Production with Nonprecious Metal Catalysts

In this work, a methodology is demonstrated to engineer gas diffusion electrodes for nonprecious metal catalysts. Highly active transition metal phosphides are prepared on carbon‐based gas diffusion electrodes with low catalyst loadings by modifying the O/C ratio at the surface of the electrode. These nonprecious metal catalysts yield extraordinary performance as measured by low overpotentials (51 mV at ?10 mA cm^?2), unprecedented mass activities (>800 A g^?1 at 100 mV overpotential), high turnover frequencies (6.96 H₂ s^?1 at 100 mV overpotential), and high durability for a precious metal‐free catalyst in acidic media. It is found that a high O/C ratio induces a more hydrophilic surface directly impacting the morphology of the CoP catalyst. The improved hydrophilicity, stemming from introduced oxyl groups on the carbon electrode, creates an electrode surface that yields a well‐distributed growth of cobalt electrodeposits and thus a well‐dispersed catalyst layer with high surface area upon phosphidation. This report demonstrates the high‐performance achievable by CoP at low loadings which facilitates further cost reduction, an important part of enabling the large‐scale commercialization of non‐platinum group metal catalysts. The fabrication strategies described herein offer a pathway to lower catalyst loading while achieving high efficiency and promising stability on a 3D electrode.     

Kinetics of the ion-sensitive Mg, Ca-adenosinetriphosphatase (ATPase) from Escherichia coli.

The Mg, Ca-ATPase from Escherichia coli is activated by KCl at low concentration and inhibited at high ion concentration. The optimum is at 30 mm KCl. The anion has a major effect, the monovalent cation a minor effect. The activation by Cl^? shows positive cooperativity with a Hill coefficient n_H= 2. The activation is accompanied by a decrease in K_m, leaving V unchanged. Thus the activation is seen especially at low substrate [MgATP] concentration. Trypsin-treated ATPase is also activated by KCl. An allosteric transition by anions is assumed.     

Graphene‐amplified electrogenerated chemiluminescence of CdTe quantum dots for H2O2 sensing

Electrogenerated chemiluminescence (ECL) of thiol‐capped CdTe quantum dots (QDs) in aqueous solution was greatly enhanced by PDDA‐protected graphene (P‐GR) film that were used for the sensitive detection of H₂O₂. When the potential was cycled between 0 and ?2.3 V, two ECL peaks were observed at ?1.1 (ECL‐1) and ?1.4 V (ECL‐2) in pH 11.0, 0.1 M phosphate buffer solution (PBS), respectively. The electron‐transfer reaction between individual electrochemically‐reduced CdTe nanocrystal species and oxidant coreactants (H₂O₂ or reduced dissolved oxygen) led to the production of ECL‐1. While mass nanocrystals packed densely in the film were reduced electrochemically, assembly of reduced nanocrystal species reacted with coreactants to produce an ECL‐2 signal. ECL‐1 showed higher sensitivity for the detection of H₂O₂ concentrations than that of ECL‐2. Further, P‐GR film not only enhanced ECL intensity of CdTe QDs but also decreased its onset potential. Thus, a novel CdTe QDs ECL sensor was developed for sensing H₂O₂. Light intensity was linearly proportional to the concentration of H₂O₂ between 1.0 × 10^?5 and 2.0 x 10^‐7 mol L^?1 with a detection limit of 9.8 x 10^?8 mol L^?1. The P‐GR thin‐film modified glassy carbon electrode (GCE) displayed acceptable reproducibility and long‐term stability. Copyright © 2012 John Wiley & Sons, Ltd.     

Dynamic Structure of Proteins in Solid State. 1H and 13C NMR Relaxation Study

Abstract

Temperature dependencies of ¹H non-selective NMR T₁ and T₂ relaxation times measured at two resonance frequencies and natural abundance ^l3C NMR relaxation times T_l and T_lr measured at room temperature have been studied in a set of dry and wet solid proteins—;Bacterial RNase, lysozyme and Bovine serum albumin (BSA). The proton and carbon data were interpreted in terms of a model supposing three kinds of internal motions in a protein. These are rotation of the methyl protons around the axis of symmetry of the methyl group, and fast and slow oscillations of all atoms. The correlation times of these motions in solid state are found around 10^?11, 10^?9 and 10^?6 s, respectively. All kinds of motion are characterized by the inhomogeneous distribution of the correlation times. The protein dehydration affects only the slow internal motion. The amplitude of the slow motion obtained from the carbon data is substantially less than that obtained from the proton data. This difference can be explained by taking into account different relative inter- and intra- chemical group contributions to the proton and carbon second moments. The comparison of the solid state and solution proton relaxation data showed that the internal protein dynamics in these states is different: the slow motion seems to be few orders of magnitude faster in solution.