Self‐Contained Monolithic Carbon Sponges for Solar‐Driven Interfacial Water Evaporation Distillation and Electricity Generation

Solar vaporization has received tremendous attention for its potential in desalination, sterilization, distillation, etc. However, a few major roadblocks toward practical application are the high cost, process intensive, fragility of solar absorber materials, and low efficiency. Herein an inexpensive cellular carbon sponge that has a broadband light absorption and inbuilt structural features to perform solitary heat localization for in situ photothermic vaporization is reported. The defining advantages of elastic cellular porous sponge are that it self‐confines water to the perpetually hot spots and accommodates cyclical dynamic fluid flow‐volume variable stress for practical usage. By isolating from bulk water, the solar‐to‐vapor conversion efficiency is increased by 2.5‐fold, surpassing that of conventional bulk heating. Notably, complementary solar steam generation‐induced electricity can be harvested during the solar vaporization so as to capitalize on waste heat. Such solar distillation and waste heat‐to‐electricity generation functions may provide potential opportunities for on‐site electricity and fresh water production for remote areas/emergency needs.     

Acetylcholinesterase‐Inhibitory Activities of the Extracts from Sponges Collected in Mauritius Waters

Patients diagnosed with Alzheimer's disease (AD) show a characteristic neurochemical deficit of acetylcholine, especially in the basal forebrains. The use of acetylcholinesterase (AChE) inhibitors to retard the hydrolysis of acetylcholine has been suggested as a promising strategy for AD treatment. In this study, we evaluated the acetylcholinesterase inhibitory (AChEI) activities of 134 extracts obtained from 45 species of marine sponges. Thin‐layer chromatography (TLC) and microplate assays reveal potent acetylcholinsterase inhibitory activities of two AcOEt extracts from the sponges Pericharax heteroraphis and Amphimedon navalis Pulitzer‐Finali . We further investigated the inhibitory kinetics of the extracts and found them to display mixed competitive/noncompetitive inhibition and associated their inhibitory activity partly to terpenoids. Acetylcholinesterase inhibitors from marine organisms have been rarely studied, and this study demonstrated the potential of marine sponges as a source of pharmaceutical leads against neurodegenerative diseases.     

High‐Efficiency Large‐Area Carbon Nanotube‐Silicon Solar Cells

Currently studied carbon nanotube‐silicon (CNT‐Si) solar cells are based on relatively small active areas (typically <0.15 cm²); increasing the active area generally leads to reduced power conversion efficiencies. This study reports CNT‐Si solar cells with active areas of more than 2 cm² for single cells, yet still achieving cell efficiencies of about 10%, which is the first time for CNT‐Si solar cells with an active area more than 1 cm² to reach the level for real applications. In this work, a controlled number of flattened highly conductive CNT strips is added, in simple arrangement, to form a CNT‐Si solar cell with CNT strips in which the middle film makes heterojunctions with Si while the top strips act as self‐similar top electrodes, like conventional metal grids. The CNT strips, directly condensed from as‐grown CNT films, not only improve the CNT‐Si junctions, but also enhance the conductivity of top electrodes without introducing contact barrier when the CNT strips are added onto the film. This property may facilitate the development of large‐area high‐performance CNT or graphene‐Si solar cells.     

Carbon Nanotube‐Silicon Solar Cells

Due to the high cost of silicon photovoltaics there is currently great interest in finding alternative semiconductor materials for light harvesting devices. Single‐walled carbon nanotubes are an allotrope of carbon with unique electrical and optical properties and are promising as future photovoltaic materials. It is thus important to investigate the methods of exploiting their properties in photovoltaic devices. In addition to already extensive research using carbon nanotubes in organic photovoltaics and photoelectrochemical cells, another way to do this is to combine them with a relatively well understood model semiconductor such as silicon. Nanotube‐silicon heterojunction solar cells are a recent photovoltaic architecture with demonstrated power conversion efficiencies of up to ～14% that may in part exploit the photoactivity of carbon nanotubes.     

Coordination in Sponges. The Foundations of Integration

Coordination mechanisms in sponges involve not only epitheliabut also the mesenchyne, which is the basic internal milieufor aii primitive Metazoa. There are three main types of coordination pathways: (i) Fluidextracellular coordination pathways are used for the spreadingof materials through the mesenchymal connective matrix. Examplesare provided by the processes of wound healing, regeneration,gametogenesis, and gemmulation. (ii) Mobile cellular coordinationpathways follow the transitory contacts and consecutive exchangesperformed by amoeboid cells which wander in the mesenchymalmatrix. Examples are provided by the processes of cell reaggregationand morphogenesis, (iii) Fixed tissue coordination pathwaysare achieved by permanent connections between cells belongingto the same unit structure, which can be an epithelium or whichcan be composed of mesenchymal cell networks and bundles. Examplesare provided by contractile activities of oscular membranes,internal canals, or of the whole sponge. The first and the secondpathways do not undergo significant modifications in the variousspecies of sponges. The third pathway, and especially the mesenchymalcontractile tissue, appears to be significantly well developedonly in thick-walled sponges. The discussion compares the three coordination systems of spongeswith integrative systems in higher Metazoa. The conclusion isthat if the coordination mechanisms in Porifera do not quiteresemble those found in higher animals, nevertheless they wouldhave been suitable for a further advent of true hormonal, immune,muscle, and nervous systems such as we know in other Metazoa.     

海绵生物活性物质及海绵细胞离体培养

介绍了来自海绵的生物活性物质种类、分布及其潜在的应用价值。讨论了其作为抗癌、抗病毒、抗细菌等药用的生物活性物质及其相关的海绵种属 ;强调海绵生物活性物质的商业化和临床应用所面临的“供给短缺问题”。作为解决这一问题的途径之一 ,海绵细胞离体培养是最有前景的技术。讨论了海绵细胞离体培养技术的研究现状 ,存在的问题及未来的发展趋势。对我国海域的海绵生物活性物质的研究开发现状进行总结 ,强调海绵研究对开发具有我国自主知识产权的新药、新化合物的必要性及重要性 ,并提出进行研发的可能优先领域     

Lithium‐Pretreated Hard Carbon as High‐Performance Sodium‐Ion Battery Anodes

Hard carbon (HC) is the state‐of‐the‐art anode material for sodium‐ion batteries (SIBs). However, its performance has been plagued by the limited initial Coulombic efficiency (ICE) and mediocre rate performance. Here, experimental and theoretical studies are combined to demonstrate the application of lithium‐pretreated HC (LPHC) as high‐performance anode materials for SIBs by manipulating the solid electrolyte interphase in tetraglyme (TEGDME)‐based electrolyte. The LPHC in TEGDME can 1) deliver > 92% ICE and ≈220 mAh g^?1 specific capacity, twice of the capacity (≈100 mAh g^?1) in carbonate electrolyte; 2) achieve > 85% capacity retention over 1000 cycles at 1000 mA g^?1 current density (4 C rate, 1 C = 250 mA g^?1) with a specific capacity of ≈150 mAh g^?1, ≈15 times of the capacity (10 mAh g^?1) in carbonate. The full cell of Na₃V₂(PO₄)₃‐LPHC in TEGDME demonstrated close to theoretical specific capacity of ≈98 mAh g^?1 based on Na₃V₂(PO₄)₃ cathode, ≈2.5 times of the value (≈40 mAh g^?1) with nontreated HC. This work provides new perception on the anode development for SIBs.     

A Dual‐Carbon Battery Based on Potassium‐Ion Electrolyte

Although potassium‐ion batteries (KIBs) have been considered to be promising alternatives to conventional lithium‐ion batteries due to large abundance and low cost of potassium resources, their development still stays at the infancy stage due to the lack of appropriate cathode and anode materials with reversible potassium insertion/extraction as well as good rate and cycling performance. Herein, a novel dual‐carbon battery based on a potassium‐ion electrolyte (named as K‐DCB), utilizing expanded graphite as cathode material and mesocarbon microbead as anode material is developed. The working mechanism of the K‐DCB is investigated, which is further demonstrated to deliver a high reversible capacity of 61 mA h g^‐1 at a current density of 1C over a voltage window of 3.0–5.2 V, as well as good cycling performance with negligible capacity decay after 100 cycles. Moreover, the high working voltage with medium discharge voltage of 4.5 V also enables the K‐DCB to meet the requirement of some high‐voltage devices. With the merits of environmental friendliness, low cost and high energy density, the K‐DCB shows attractive potential for future energy storage application.     

Metal‐Free Artificial Photosynthesis of Carbon Monoxide Using N‐Doped ZnTe Nanorod Photocathode Decorated with N‐Doped Carbon Electrocatalyst Layer

An artificial photosynthesis system based on N‐doped ZnTe nanorods decorated with an N‐doped carbon electrocatalyst layer is fabricated via an all‐solution process for the selective conversion of CO₂ to CO. Substitutional N‐doping into the ZnTe lattice decreases the bandgap slightly and improves the charge transfer characteristics, leading to enhanced photoelectrochemical activity. Remarkable N‐doping effects are also demonstrated by the N‐doped carbon layer that promotes selective CO₂‐to‐CO conversion instead of undesired water‐to‐H₂ reduction by providing active sites for CO₂ adsorption and activation, even in the absence of metallic redox centers. The photocathode shows promising performance in photocurrent generation (?1.21 mA cm^?2 at ?0.11 V_RHE), CO selectivity (dominant CO production of ≈72%), minor H₂ reduction (≈20%), and stability (corrosion suppression). The metal‐free electrocatalyst/photocatalyst combination prepared via a cost‐effective solution process exhibits high performance due to synergistic effects between them, and thus may find application in practical solar fuel production.     

Marine Sponges as Pharmacy

Marine sponges have been considered as a gold mine during the past 50 years, with respect to the diversity of their secondary metabolites. The biological effects of new metabolites from sponges have been reported in hundreds of scientific papers, and they are reviewed here. Sponges have the potential to provide future drugs against important diseases, such as cancer, a range of viral diseases, malaria, and inflammations. Although the molecular mode of action of most metabolites is still unclear, for a substantial number of compounds the mechanisms by which they interfere with the pathogenesis of a wide range of diseases have been reported. This knowledge is one of the key factors necessary to transform bioactive compounds into medicines. Sponges produce a plethora of chemical compounds with widely varying carbon skeletons, which have been found to interfere with pathogenesis at many different points. The fact that a particular disease can be fought at different points increases the chance of developing selective drugs for specific targets.     

Cultivation of Marine Sponges

There is increasing interest in biotechnological production of marine sponge biomass owing to the discovery of many commercially important secondary metabolites in this group of animals. In this article, different approaches to producing sponge biomass are reviewed, and several factors that possibly influence culture success are evaluated. In situ sponge aquacultures, based on old methods for producing commercial bath sponges, are still the easiest and least expensive way to obtain sponge biomass in bulk. However, success of cultivation with this method strongly depends on the unpredictable and often suboptimal natural environment. Hence, a better-defined production system would be desirable. Some progress has been made with culturing sponges in semicontrolled systems, but these still use unfiltered natural seawater. Cultivation of sponges under completely controlled conditions has remained a problem. When designing an in vitro cultivation method, it is important to determine both qualitatively and quantitatively the nutritional demands of the species that is to be cultured. An adequate supply of food seems to be the key to successful sponge culture. Recently, some progress has been made with sponge cell cultures. The advantage of cell cultures is that they are completely controlled and can easily be manipulated for optimal production of the target metabolites. However, this technique is still in its infancy: a continuous cell line has yet to be established. Axenic cultures of sponge aggregates (primmorphs) may provide an alternative to cell culture. Some sponge metabolites are, in fact, produced by endosymbiotic bacteria or algae that live in the sponge tissue. Only a few of these endosymbionts have been cultivated so far. The biotechnology for the production of sponge metabolites needs further development. Research efforts should be continued to enable commercial exploitation of this valuable natural resource in the near future. Received November 5, 1998; accepted June 20, 1999.     

Farming Sponges to Supply Bioactive Metabolites and Bath Sponges: A Review

Sponges have been experimentally farmed for over 100 years, with early attempts done in the sea to supply “bath sponges”. During the last 20 years, sponges have also been experimentally cultured both in the sea and in tanks on land for their biologically active metabolites, some of which have pharmaceutical potential. Sea-based farming studies have focused on developing good farming structures and identifying the optimal environmental conditions that promote production of bath sponges or bioactive metabolites. The ideal farming structure will vary between species and regions, but will generally involve threading sponges on rope or placing them inside mesh. For land-based sponge culture, most research has focused on determining the feeding requirements that promote growth. Many sea- and land-based studies have shown that sponges grow quickly, often doubling in size every few months. Other favorable results and interesting developments include partially harvesting farmed sponges to increase biomass yields, seeding sexually reproduced larvae on farming structures, using sponge farms as large biofilters to control microbial populations, and manipulating culture conditions to promote metabolite biosynthesis. Even though some results are promising, land-based culture needs further research and is not likely to be commercially feasible in the near future. Sea-based culture still holds great promise, with several small-scale farming operations producing bath sponges or metabolites. The greatest potential for commercial bath sponge culture is probably for underdeveloped coastal communities, where it can provide an alternative and environmentally friendly source of income.     

Carotenoids of Marine Sponges

The 42 identified carotenoids isolated from 36 different marine spontes may, from structural considerations, be divided into four groups; (a) native phytoplankton-type carotenoids; (b) intact carotenoids of possible zooplankton origin, 9c) intact carotenoids of probable bacterial of fungal origin; and (d) sponge metabolized carotenoids. Groups (a) and (d) are the major categories, group (d) comprises several mono- and diaryl carotenoids and some oxygenated carotenoids so far peculiar to the Demospongiae. Chemosystematic considerations suggest that highest capacity for carotenoid accumulation and transformation is to be found within the orders Poecilosclerida and Axinellida, which exhibit similar carotenoid patterns. The screening of carotenoids in 34 coloured species from the Australian RRIMP collection showed a total carotenoid content of 0.1–90 × 10^?3% of the ry wt. individual carotenoids were characterized for 16 species including 11 previously known carotenoids, two new partly characterized methoxylated carotenoids and some phenolic carotenoids.     

Paper‐Based Energy‐Storage Devices Comprising Carbon Fiber‐Reinforced Polypyrrole‐Cladophora Nanocellulose Composite Electrodes

Composites of polypyrrole (PPy) and Cladophora nanocellulose, reinforced with 8 μm‐thick chopped carbon filaments, can be used as electrode materials to obtain paper‐based energy‐storage devices with unprecedented performance at high charge and discharge rates. Charge capacities of more than 200 C g^?1 (PPy) are obtained for paper‐based electrodes at potential scan rates as high as 500 mV s^?1, whereas cell capacitances of ～60–70 F g^?1 (PPy) are reached for symmetric supercapacitor cells with capacitances up to 3.0 F (i.e.,0.48 F cm^?2) when charged to 0.6 V using current densities as high as 31 A g^?1 based on the PPy weight (i.e., 99 mA cm^?2). Energy and power densities of 1.75 Wh kg^?1 and 2.7 kW kg^?1, respectively, are obtained when normalized with respect to twice the PPy weight of the smaller electrode. No loss in cell capacitance is seen during charging/discharging at 7.7 A g^?1 (PPy) over 1500 cycles. It is proposed that the nonelectroactive carbon filaments decrease the contact resistances and the resistance of the reduced PPy composite. The present straightforward approach represents significant progress in the development of low‐cost and environmentally friendly paper‐based energy‐storage devices for high‐power applications.     

Ultra‐Lightweight 3D Carbon Current Collectors: Constructing All‐Carbon Electrodes for Stable and High Energy Density Dual‐Ion Batteries

Dual‐ion batteries (DIBs) attract great interest because they allow two types of ions for reversibly intercalating into electrodes, resulting in various advantages. However, there are three critical problems using graphite‐based cathodes, namely, low active material proportion in the electrodes, current collector corrosion, and massive cathode variation. For addressing these problems, an ultra‐lightweight 3D carbon current collector (CCC) is developed to fabricate all‐carbon electrodes as both cathodes and anodes. Compared with the conventional DIBs using Al and Cu foils as current collectors, the DIBs with 3D CCC of electrically conductive pathways and sufficient ionic diffusion channels deliver enhanced specific capacity stabilized around 140 and 120 mAh g^?1 at 0.5 and 1C, respectively. The electrochemically inert 3D CCC could essentially promote the energy density when calculating the entire electrode mass, along with long‐life cycle stability of 1000 cycles at 5C and no electrochemical corrosion on either anodes or cathodes. With an in situ optical microscope, the cathode expansion is found to massively reduce because the porous 3D CCC could effectively alleviate the huge volume. The results suggest a novel strategy for achieving low‐cost and high energy density DIBs with both mechanically and electrochemically stable features.     

Flexible Nano‐felts of Carbide‐Derived Carbon with Ultra‐high Power Handling Capability

Nano‐fibrous felts (nano‐felts) of carbide‐derived carbon (CDC) have been developed from the precursor of electrospun titanium carbide (TiC) nano‐felts. Conformal transformation of TiC into CDC conserves main features of the precursor including the high interconnectivity and structural integrity; the developed TiC‐CDC nano‐felts are mechanically flexible/resilient, and can be used as electrode material for supercapacitor application without the addition of any binder. After synthesis through chlorination of the precursor at 600 °C, the TiC‐CDC nano‐fibers show an average pore size of ～1nm, a high specific surface area of 1390 m²/g; and the nano‐fibers have graphitic carbon ribbons embedded in a highly disordered carbon matrix. Graphitic carbon is preserved from the precursor nano‐fibers where a few graphene layers surround TiC nanocrystallites. Electrochemical measurements show a high gravimetric capacitance of 110 F/g in aqueous electrolyte (1 M H₂SO₄) and 65 F/g in organic electrolyte (1.5 M TEA‐BF₄ in acetonitrile). Because of the unique microstructure of TiC‐CDC nano‐felts, a fade of the capacitance of merely 50% at a high scan rate of 5 V/s is observed. A fade of just 15% is observed for nano‐felt film electrodes tested in 1 M H₂ SO₄ at 1 V/s, resulting in a high gravimetric capacitance of 94 F/g. Such a high rate performance is only known for graphene or carbon‐onion based supercapacitors, whereas binders have to be used for the fabrication of those supercapacitors.