Rational Design of Graphene‐Supported Single Atom Catalysts for Hydrogen Evolution Reaction

The proper choice of nonprecious transition metals as single atom catalysts (SACs) remains unclear for designing highly efficient electrocatalysts for hydrogen evolution reaction (HER). Herein, reported is an activity correlation with catalysts, electronic structure, in order to clarify the origin of reactivity for a series of transition metals supported on nitrogen‐doped graphene as SACs for HER by a combination of density functional theory calculations and electrochemical measurements. Only few of the transition metals (e.g., Co, Cr, Fe, Rh, and V) as SACs show good catalytic activity toward HER as their Gibbs free energies are varied between the range of –0.20 to 0.30 eV but among which Co‐SAC exhibits the highest electrochemical activity at 0.13 eV. Electronic structure studies show that the energy states of active valence d_z² orbitals and their resulting antibonding state determine the catalytic activity for HER. The fact that the antibonding state orbital is neither completely empty nor fully filled in the case of Co‐SAC is the main reason for its ideal hydrogen adsorption energy. Moreover, the electrochemical measurement shows that Co‐SAC exhibits a superior hydrogen evolution activity over Ni‐SAC and W‐SAC, confirming the theoretical calculation. This systematic study gives a fundamental understanding about the design of highly efficient SACs for HER.     

Engineered MoSe2‐Based Heterostructures for Efficient Electrochemical Hydrogen Evolution Reaction

2D transition metal‐dichalcogenides are emerging as efficient and cost‐effective electrocatalysts for the hydrogen evolution reaction (HER). However, only the edge sites of their trigonal prismatic phase show HER‐electrocatalytic properties, while the basal plane, which is absent of defective/unsaturated sites, is inactive. Herein, the authors tackle the key challenge of increasing the number of electrocatalytic sites by designing and engineering heterostructures composed of single‐/few‐layer MoSe₂ flakes and carbon nanomaterials (graphene or single‐wall carbon nanotubes) produced by solution processing. The electrochemical coupling between the materials that comprise the heterostructure effectively enhances the HER‐electrocatalytic activity of the native MoSe₂ flakes. The optimization of the mass loading of MoSe₂ flakes and their electrode assembly via monolithic heterostructure stacking provides a cathodic current density of 10 mA cm^?2 at overpotential of 100 mV, a Tafel slope of 63 mV dec^?1, and an exchange current density (j₀) of 0.203 µA cm^?2. In addition, thermal and chemical treatments are exploited to texturize the basal planes of the MoSe₂ flakes (through Se‐vacancies creation) and to achieve in situ semiconducting‐to‐metallic phase conversion, respectively, thus they activate new HER‐electrocatalytic sites. The as‐engineered electrodes show a 4.8‐fold enhancement of j₀ and a decrease in the Tafel slope to 54 mV dec^?1.     

A Monodisperse Rh2P‐Based Electrocatalyst for Highly Efficient and pH‐Universal Hydrogen Evolution Reaction

The search for Pt‐free electrocatalysts exceeding pH‐universal hydrogen evolution reaction (HER) activities when compared to the state‐of‐the‐art commercial Pt/C is highly desirable for the development of renewable energy conversion systems but still remains a huge challenge. Here a colloidal synthesis of monodisperse Rh₂P nanoparticles with an average size of 2.8 nm and their superior catalytic activities for pH‐universal HER are reported. Significantly, the Rh₂P catalyst displays remarkable HER performance with overpotentials of 14, 30, and 38 mV to achieve 10 mA cm^?2 in 0.5 m H₂SO₄, 1.0 m KOH, and 1.0 m phosphate‐buffered saline, respectively, exceeding almost all the documented electrocatalysts, including the commercial 20 wt% Pt/C. Density functional theory calculations reveal that the introduction of P into Rh can weaken the H adsorption strength of Rh₂P to nearly zero, beneficial for boosting HER performance.     

Experimental and Theoretical Assessment of Ni‐Based Binary Compounds for the Hydrogen Evolution Reaction

Metallic binary compounds have emerged in recent years as highly active and stable electrocatalysts toward the hydrogen evolution reaction. In this work, the origin of their high activity from a theoretical and experimental point of view is elucidated. Here, different metallic ceramics as Ni₃S₂, Ni₃N, or Ni₅P₄ are grown directly on Ni support in order to avoid any contaminations. The correlation of theoretical calculations with detailed material characterization and electrochemical testing paves the way to a deeper understanding of possible active adsorption sites for each material and the observed catalytic activity. It is shown that heteroatoms as P, S, and N actively take part in the reaction and do not act as simple spectator. Due to the anisotropic nature of the materials, a variety of adsorption sites with highly coverage‐dependent properties exists, leading to a general shift in hydrogen adsorption free energies ΔG _H close to zero. Extending the knowledge gained about the here described materials, a new catalyst is prepared by modifying a high surface Ni foam, for which current densities up to 100 mA cm^?2 at around 0.15 V (for Ni₃N) are obtained.     

Ultrastable In‐Plane 1T–2H MoS2 Heterostructures for Enhanced Hydrogen Evolution Reaction

Metallic 1T MoS₂ is highly desirable for catalyzing electrochemical hydrogen production from water owing to its high electrical conductivity. However, stable 1T MoS₂ is difficult to be produced in large‐scale by either common chemical or physical approaches. Here, ultrastable in‐plane 1T–2H MoS₂ heterostructures are achieved via a simple one‐pot annealing treatment of 2H MoS₂ bulk under a mixture gas of Ar and phosphorous vapor, where phosphorus cannot only occupy the interspace of MoS₂ bulk, resulting in the expansion of MoS_2, but also embed into the lattice of MoS_2, inducing the partial phase transition from 2H to 1T phases of MoS₂. Benefiting from its significantly improved electrical conductivity, highly exposed active sites, and hydrophily property, in‐plane 1T–2H MoS₂ heterostructures exhibit largely improved electrocatalytic properties for hydrogen evolution reaction (HER) in alkaline electrolytes.     

A New Platinum‐Like Efficient Electrocatalyst for Hydrogen Evolution Reaction at All pH: Single‐Crystal Metallic Interweaved V8C7 Networks

Exploring low‐cost hydrogen evolution reaction (HER) catalysts with remarkable activity over wide pH range (0–14) still remains an enormous challenge. Herein, for the first time, a novel platinum‐like, double‐deck carbon coated V₈C₇ networks with the highly active (110) facet exposed as a new efficient HER electrocatalyst is reported. The single‐crystal interweaved V₈C₇ networks are designed and fabricated based on a low crystal‐mismatch strategy and confinement effect of double‐deck carbon coating. In addition, electrochemical tests and theoretical simulation indicate that the metallic character of V₈C₇, high‐activity of exposed facet, and low barrier energy for water dissociation can contribute to highly catalytic activity of HER. Impressively, the HER performances of the interweaved V₈C₇ networks can be comparable to those of Pt at an all‐pH environment, with Tafel slopes of 44, 64, and 34.5 mV dec^?1and overpotential of 47, 77, and 38 mV at ?10 mA cm^?2 in 1 m KOH, 0.1 m phosphate buffer, and 0.5 m H₂SO₄, respectively. This work provides a blueprint for exploring new‐type platinum‐like catalysts for various energy conversion systems.     

A Multisite Strategy for Enhancing the Hydrogen Evolution Reaction on a Nano‐Pd Surface in Alkaline Media

The hydrogen evolution reaction (HER) on a noble metal surface in alkaline media is more sluggish than that in acidic media due to the limited proton supply. To promote the reaction, it is necessary to transform the alkaline HER mechanism via a multisite catalyst, which has additional water dissociation sites to improve the proton supply to an optimal level. Here, this study reports a top‐down strategy to create a multisite HER catalyst on a nano‐Pd surface and how to further fine‐tune the areal ratio of the water dissociation component to the noble metal surface in core/shell‐structured nanoparticles (NPs). Starting with Pd/Fe₃O₄ core/shell NPs, electrochemical cycling is used to tune the coverage of iron (oxy)hydroxide on a Pd surface. The alkaline HER activity of the core/sell Pd/FeO_x (OH)_2?2x NPs exhibits a volcano‐shaped correlation with the surface Fe species coverage. This indicates an optimum coverage level where the rates of both the water dissociation step and the hydrogen formation step are balanced to achieve the highest efficiency. This multisite strategy assigns multiple reaction steps to different catalytic sites, and should also be extendable to other core/shell NPs to optimize their HER activity in alkaline media.     

Ruthenium‐Based Single‐Atom Alloy with High Electrocatalytic Activity for Hydrogen Evolution

Highly efficient and stable catalysts for the hydrogen evolution reaction, especially in alkaline conditions are crucial for the practical demands of electrochemical water splitting. Here, the synthesis of a novel RuAu single‐atom alloy (SAA) by laser ablation in liquid is reported. The SAA exhibits a high stability and a low overpotential, 24 mV@10 mA cm^?2, which is much lower than that of a Pt/C catalyst (46 mV) in alkaline media. Moreover, the turnover frequency of RuAu SAA is three times that of Pt/C catalyst. Density functional theory computation indicates the excellent catalytic activity of RuAu SAAs originates from the relay catalysis of Ru and Au active sites. This work opens a new avenue toward high‐performance SAAs via fast quenching of immiscible metals.     

A Review of Phosphide‐Based Materials for Electrocatalytic Hydrogen Evolution

Hydrogen evolution by means of electrocatalytic water‐splitting is pivotal for efficient and economical production of hydrogen, which relies on the development of inexpensive, highly active catalysts. In addition to sulfides, the search for non‐noble metal catalysts has been mainly directed at phosphides due to the superb activity of phosphides for hydrogen evolution reaction (HER) and their low‐cost considering the abundance of the non‐noble constituents of phosphides. Here, recent research focusing on phosphides is summarized based on their synthetic methodology. A comparative study of the catalytic activity of different phosphides towards HER is then conducted. The catalytic activity is evaluated by overpotentials at fixed current density, Tafel slope, turnover frequency, and the Gibbs free energy of hydrogen adsorption. Based on the methods discussed, perspectives for the various methods of phosphides synthesis are given, and the origins of the high activity and the role of phosphorus on the improved activity towards HER are discussed.     

Three‐Dimensional Smart Catalyst Electrode for Oxygen Evolution Reaction

A multifunctional catalyst electrode mimicking external stimuli–responsive property has been prepared by the in situ growth of nitrogen (N)‐doped NiFe double layered hydroxide (N–NiFe LDH) nanolayers on a 3D nickel foam substrate framework. The electrode demonstrates superior performance toward catalyzing oxygen evolution reaction (OER), affording a low overpotential of 0.23 V at the current density of 10 mA cm^?2, high Faradaic efficiency of ≈98%, and stable operation for >60 h. Meanwhile, the electrode can dynamically change its color from gray silver to dark black with the OER happening, and the coloration/bleaching processes persist for at least 5000 cycles, rendering it a useful tool to monitor the catalytic process. Mechanism study reveals that the excellent structural properties of electrode such as 3D conductive framework, ultra thickness of N–NiFe LDH nanolayer (≈0.8 nm), and high N‐doping content (≈17.8%) make significant contribution to achieving enhanced catalytic performance, while N–NiFe LDH nanolayer on electrode is the main contributor to the stimuli‐responsive property with the reversible extraction/insertion of electrons from/into N–NiFe LDH leading to the coloration/bleaching processes. Potential application of this electrode has been further demonstrated by integrating it into a Zn–air battery device to identify the charging process during electrochemical cycling.     

Urea‐Modified Carbon Nitrides: Enhancing Photocatalytic Hydrogen Evolution by Rational Defect Engineering

The primary amine groups on the heptazine‐based polymer melon, also known as graphitic carbon nitride (g‐C₃N₄), can be replaced by urea groups using a two‐step postsynthetic functionalization. Under simulated sunlight and optimum Pt loading, this urea‐functionalized carbon nitride has one of the highest activities among organic and polymeric photocatalysts for hydrogen evolution with methanol as sacrificial donor, reaching an apparent quantum efficiency of 18% and nearly 30 times the hydrogen evolution rate compared to the nonfunctionalized counterpart. In the absence of Pt, the urea‐derivatized material evolves hydrogen at a rate over four times that of the nonfunctionalized one. Since “defects” are conventionally accepted to be the active sites in graphitic carbon nitride for photocatalysis, the work here is a demonstrated example of “defect engineering,” where the catalytically relevant defect is inserted rationally for improving the intrinsic, rather than extrinsic, photocatalytic performance. Furthermore, the work provides a retrodictive explanation for the general observation that g‐C₃N₄ prepared from urea performs better than those prepared from dicyandiamide and melamine. In‐depth analyses of the spent photocatalysts and computational modeling suggest that inserting the urea group causes a metal‐support interaction with the Pt cocatalyst, thus facilitating interfacial charge transfer to the hydrogen evolving centers.     

A Solution‐Processable Polymer Photocatalyst for Hydrogen Evolution from Water

Direct photocatalytic water splitting is an attractive strategy for clean energy production, but multicomponent nanostructured systems that mimic natural photosynthesis can be difficult to fabricate because of the insolubility of most photocatalysts. Here, a solution‐processable organic polymer is reported that is a good photocatalyst for hydrogen evolution from water, either as a powder or as a thin film, suggesting future applications for soluble conjugated organic polymers in multicomponent photocatalysts for overall water splitting.     

Doped‐MoSe2 Nanoflakes/3d Metal Oxide–Hydr(Oxy)Oxides Hybrid Catalysts for pH‐Universal Electrochemical Hydrogen Evolution Reaction

Clean hydrogen production is highly promising to meet future global energy demands. The design of earth‐abundant materials with both high activity for hydrogen evolution reaction (HER) and electrochemical stability in both acidic and alkaline environments is needed, in order to enable practical applications. Here, the authors report a non‐noble 3d metal Cl‐chemical doping of liquid phase exfoliated single‐/few‐layer flakes of MoSe₂ for creating MoSe₂/3d metal oxide–hydr(oxy)oxide hybrid HER‐catalysts. It is proposed that the electron‐transfer from MoSe₂ nanoflakes to metal cations and the chlorine complexation‐induced neutralization, as well as the in situ formation of metal oxide–hydr(oxy)oxides on the MoSe₂ nanoflakes' surface, tailor the proton affinity of the catalysts, increasing the number and HER‐kinetics of their active sites in both acidic and alkaline electrolytes. The electrochemical coupling between doped‐MoSe₂/metal oxide–hydr(oxy)oxide hybrids and single‐walled carbon nanotubes heterostructures further accelerates the HER process. Lastly, monolithic stacking of multiple heterostructures is reported as a facile electrode assembly strategy to achieve overpotential for a cathodic current density of 10 mA cm^?2 of 0.081 and 0.064 V in 0.5 m H₂SO₄ and 1 m KOH, respectively. This opens up new opportunities to address the current density versus overpotential requirements targeted in pH‐universal hydrogen production.     

Vertical CoP Nanoarray Wrapped by N,P‐Doped Carbon for Hydrogen Evolution Reaction in Both Acidic and Alkaline Conditions

Hydrogen evolution reaction (HER) is a key reaction in water splitting, and developing efficient and robust non‐noble electrocatalysts for HER is still a great challenge for large‐scale hydrogen production. Herein, a vertically aligned core–shell structure grown on Ti foil with CoP nanoarray as a core and N,P‐doped carbon (NPC) as a shell (CoP/NPC/TF) is first reported as an efficient electrocatalyst for HER. Results indicate that CoP/NPC/TF only demands the overpotentials of 91 and 80 mV to drive the current density of 10 mA cm^?2 in acidic and alkaline solutions. The electrochemical measurements and theoretical calculations show that the synergy of CoP nanorod core and porous NPC shell enhances HER performance significantly, because the introduction of porous NPC shell not only offers more active sites but also improves the electrical conductivity and durability of the sample in acidic and alkaline solutions. Density functional theory calculation further reveals that all the C atoms between N and P atoms in CoP/NPC are the most efficient active sites, which greatly improve the HER performance. The identification of active species in this work provides an effective strategy to design and synthesize the low‐cost, high‐efficient, and robust CoP‐based electrocatalysts.