Q-RRBS: a quantitative reduced representation bisulfite sequencing method for single-cell methylome analyses

Reduced representation bisulfite sequencing (RRBS) is a powerful method of DNA methylome profiling that can be applied to single cells. However, no previous report has described how PCR-based duplication-induced artifacts affect the accuracy of this method when measuring DNA methylation levels. For quantifying the effects of duplication-induced artifacts on methylome profiling when using ultra-trace amounts of starting material, we developed a novel method, namely quantitative RRBS (Q-RRBS), in which PCR-induced duplication is excluded through the use of unique molecular identifiers (UMIs). By performing Q-RRBS on varying amounts of starting material, we determined that duplication-induced artifacts were more severe when small quantities of the starting material were used. However, through using the UMIs, we successfully eliminated these artifacts. In addition, Q-RRBS could accurately detect allele-specific methylation in absence of allele-specific genetic variants. Our results demonstrate that Q-RRBS is an optimal strategy for DNA methylation profiling of single cells or samples containing ultra-trace amounts of cells.     

Gel-free multiplexed reduced representation bisulfite sequencing for large-scale DNA methylation profiling

DNA methylation is an important epigenetic modification involved in gene regulation, which can now be measured using whole-genome bisulfite sequencing. However, cost, complexity of the data, and lack of comprehensive analytical tools are major challenges that keep this technology from becoming widely applied. Here we present BSmooth, an alignment, quality control and analysis pipeline that provides accurate and precise results even with low coverage data, appropriately handling biological replicates. BSmooth is open source software, and can be downloaded from http://rafalab.jhsph.edu/bsmooth.     

Gel-free multiplexed reduced representation bisulfite sequencing for large-scale DNA methylation profiling

Sequencing-based approaches have led to new insights about DNA methylation. While many different techniques for genome-scale mapping of DNA methylation have been employed, throughput has been a key limitation for most. To further facilitate the mapping of DNA methylation, we describe a protocol for gel-free multiplexed reduced representation bisulfite sequencing (mRRBS) that reduces the workload dramatically and enables processing of 96 or more samples per week. mRRBS achieves similar CpG coverage to the original RRBS protocol, while the higher throughput and lower cost make it better suited for large-scale DNA methylation mapping studies, including cohorts of cancer samples.     

Improved reduced representation bisulfite sequencing for epigenomic profiling of clinical samples

Background

DNA methylation plays crucial roles in epigenetic gene regulation in normal development and disease pathogenesis. Efficient and accurate quantification of DNA methylation at single base resolution can greatly advance the knowledge of disease mechanisms and be used to identify potential biomarkers. We developed an improved pipeline based on reduced representation bisulfite sequencing (RRBS) for cost-effective genome-wide quantification of DNA methylation at single base resolution. A selection of two restriction enzymes (Taq^αI and MspI) enables a more unbiased coverage of genomic regions of different CpG densities. We further developed a highly automated software package to analyze bisulfite sequencing results from the Solexa GAIIx system.

Results

With two sequencing lanes, we were able to quantify ~1.8 million individual CpG sites at a minimum sequencing depth of 10. Overall, about 76.7% of CpG islands, 54.9% of CpG island shores and 52.2% of core promoters in the human genome were covered with at least 3 CpG sites per region.

Conclusions

With this new pipeline, it is now possible to perform whole-genome DNA methylation analysis at single base resolution for a large number of samples for understanding how DNA methylation and its changes are involved in development, differentiation, and disease pathogenesis.     

Mapping the zebrafish brain methylome using reduced representation bisulfite sequencing

Reduced representation bisulfite sequencing (RRBS) has been used to profile DNA methylation patterns in mammalian genomes such as human, mouse and rat. The methylome of the zebrafish, an important animal model, has not yet been characterized at base-pair resolution using RRBS. Therefore, we evaluated the technique of RRBS in this model organism by generating four single-nucleotide resolution DNA methylomes of adult zebrafish brain. We performed several simulations to show the distribution of fragments and enrichment of CpGs in different in silico reduced representation genomes of zebrafish. Four RRBS brain libraries generated 98 million sequenced reads and had higher frequencies of multiple mapping than equivalent human RRBS libraries. The zebrafish methylome indicates there is higher global DNA methylation in the zebrafish genome compared with its equivalent human methylome. This observation was confirmed by RRBS of zebrafish liver. High coverage CpG dinucleotides are enriched in CpG island shores more than in the CpG island core. We found that 45% of the mapped CpGs reside in gene bodies, and 7% in gene promoters. This analysis provides a roadmap for generating reproducible base-pair level methylomes for zebrafish using RRBS and our results provide the first evidence that RRBS is a suitable technique for global methylation analysis in zebrafish.     

Preparation of reduced representation bisulfite sequencing libraries for genome-scale DNA methylation profiling

Genome-wide mapping of 5-methylcytosine is of broad interest to many fields of biology and medicine. A variety of methods have been developed, and several have recently been advanced to genome-wide scale using arrays and next-generation sequencing approaches. We have previously reported reduced representation bisulfite sequencing (RRBS), a bisulfite-based protocol that enriches CG-rich parts of the genome, thereby reducing the amount of sequencing required while capturing the majority of promoters and other relevant genomic regions. The approach provides single-nucleotide resolution, is highly sensitive and provides quantitative DNA methylation measurements. This protocol should enable any standard molecular biology laboratory to generate RRBS libraries of high quality. Briefly, purified genomic DNA is digested by the methylation-insensitive restriction enzyme MspI to generate short fragments that contain CpG dinucleotides at the ends. After end-repair, A-tailing and ligation to methylated Illumina adapters, the CpG-rich DNA fragments (40-220 bp) are size selected, subjected to bisulfite conversion, PCR amplified and end sequenced on an Illumina Genome Analyzer. Note that alignment and analysis of RRBS sequencing reads are not covered in this protocol. The extremely low input requirements (10-300 ng), the applicability of the protocol to formalin-fixed and paraffin-embedded samples, and the technique's single-nucleotide resolution extends RRBS to a wide range of biological and clinical samples and research applications. The entire process of RRBS library construction takes ～9 d.     

Systematic assessment of reduced representation bisulfite sequencing to human blood samples: A promising method for large-sample-scale epigenomic studies

Complementary to the time- and cost-intensive direct bisulfite sequencing, we applied reduced representation bisulfite sequencing (RRBS) to the human peripheral blood mononuclear cells (PBMC) from YH, the Asian individual whose genome and epigenome has been deciphered in the YH project and systematically assessed the genomic coverage, coverage depth and reproducibility of this technology as well as the concordance of DNA methylation levels measured by RRBS and direct bisulfite sequencing for the detected CpG sites. Our result suggests that RRBS can cover more than half of CpG islands and promoter regions with a good coverage depth and the proportion of the CpG sites covered by the biological replicates reaches 80-90%, indicating good reproducibility. Given a smaller data quantity, RRBS enjoys much better coverage depth than direct bisulfite sequencing and the concordance of DNA methylation levels between the two methods is high. It can be concluded that RRBS is a time and cost-effective sequencing method for unbiased DNA methylation profiling of CpG islands and promoter regions in a genome-wide scale and it is the method of choice to assay certain genomic regions for multiple samples in a rapid way.     

Reduced representation bisulfite sequencing for comparative high-resolution DNA methylation analysis

We describe a large-scale random approach termed reduced representation bisulfite sequencing (RRBS) for analyzing and comparing genomic methylation patterns. BglII restriction fragments were size-selected to 500–600 bp, equipped with adapters, treated with bisulfite, PCR amplified, cloned and sequenced. We constructed RRBS libraries from murine ES cells and from ES cells lacking DNA methyltransferases Dnmt3a and 3b and with knocked-down (kd) levels of Dnmt1 (Dnmt[1^kd,3a^−/−,3b^−/−]). Sequencing of 960 RRBS clones from Dnmt[1^kd,3a^−/−,3b^−/−] cells generated 343 kb of non-redundant bisulfite sequence covering 66212 cytosines in the genome. All but 38 cytosines had been converted to uracil indicating a conversion rate of >99.9%. Of the remaining cytosines 35 were found in CpG and 3 in CpT dinucleotides. Non-CpG methylation was >250-fold reduced compared with wild-type ES cells, consistent with a role for Dnmt3a and/or Dnmt3b in CpA and CpT methylation. Closer inspection revealed neither a consensus sequence around the methylated sites nor evidence for clustering of residual methylation in the genome. Our findings indicate random loss rather than specific maintenance of methylation in Dnmt[1^kd,3a^−/−,3b^−/−] cells. Near-complete bisulfite conversion and largely unbiased representation of RRBS libraries suggest that random shotgun bisulfite sequencing can be scaled to a genome-wide approach.     

BatAlign: an incremental method for accurate alignment of sequencing reads

Structural variations (SVs) play a crucial role in genetic diversity. However, the alignments of reads near/across SVs are made inaccurate by the presence of polymorphisms. BatAlign is an algorithm that integrated two strategies called ‘Reverse-Alignment’ and ‘Deep-Scan’ to improve the accuracy of read-alignment. In our experiments, BatAlign was able to obtain the highest F-measures in read-alignments on mismatch-aberrant, indel-aberrant, concordantly/discordantly paired and SV-spanning data sets. On real data, the alignments of BatAlign were able to recover 4.3% more PCR-validated SVs with 73.3% less callings. These suggest BatAlign to be effective in detecting SVs and other polymorphic-variants accurately using high-throughput data. BatAlign is publicly available at https://goo.gl/a6phxB.     

PCMA: fast and accurate multiple sequence alignment based on profile consistency

PCMA (profile consistency multiple sequence alignment) is a progressive multiple sequence alignment program that combines two different alignment strategies. Highly similar sequences are aligned in a fast way as in ClustalW, forming pre-aligned groups. The T-Coffee strategy is applied to align the relatively divergent groups based on profile-profile comparison and consistency. The scoring function for local alignments of pre-aligned groups is based on a novel profile-profile comparison method that is a generalization of the PSI-BLAST approach to profile-sequence comparison. PCMA balances speed and accuracy in a flexible way and is suitable for aligning large numbers of sequences. AVAILABILITY: PCMA is freely available for non-commercial use. Pre-compiled versions for several platforms can be downloaded from ftp://iole.swmed.edu/pub/PCMA/.     

SimArray: a user-friendly and user-configurable microarray design tool

Background  

Microarrays were first developed to assess gene expression but are now also used to map protein-binding sites and to assess allelic variation between individuals. Regardless of the intended application, efficient production and appropriate array design are key determinants of experimental success. Inefficient production can make larger-scale studies prohibitively expensive, whereas poor array design makes normalisation and data analysis problematic.     

T-lex: a program for fast and accurate assessment of transposable element presence using next-generation sequencing data

Transposable elements (TEs) are repetitive DNA sequences that are ubiquitous, extremely abundant and dynamic components of practically all genomes. Much effort has gone into annotation of TE copies in reference genomes. The sequencing cost reduction and the newly available next-generation sequencing (NGS) data from multiple strains within a species offer an unprecedented opportunity to study population genomics of TEs in a range of organisms. Here, we present a computational pipeline (T-lex) that uses NGS data to detect the presence/absence of annotated TE copies. T-lex can use data from a large number of strains and returns estimates of population frequencies of individual TE insertions in a reasonable time. We experimentally validated the accuracy of T-lex detecting presence or absence of 768 previously identified TE copies in two resequenced Drosophila melanogaster strains. Approximately 95% of the TE insertions were detected with 100% sensitivity and 97% specificity. We show that even at low levels of coverage T-lex produces accurate results for TE copies that it can identify reliably but that the rate of 'no data' calls increases as the coverage falls below 15×. T-lex is a broadly applicable and flexible tool that can be used in any genome provided the availability of the reference genome, individual TE copy annotation and NGS data.     

ITIS,a bioinformatics tool for accurate identification of transposon insertion sites using next-generation sequencing data

Background

Transposable elements constitute an important part of the genome and are essential in adaptive mechanisms. Transposition events associated with phenotypic changes occur naturally or are induced in insertional mutant populations. Transposon mutagenesis results in multiple random insertions and recovery of most/all the insertions is critical for forward genetics study. Using genome next-generation sequencing data and appropriate bioinformatics tool, it is plausible to accurately identify transposon insertion sites, which could provide candidate causal mutations for desired phenotypes for further functional validation.

Results

We developed a novel bioinformatics tool, ITIS (Identification of Transposon Insertion Sites), for localizing transposon insertion sites within a genome. It takes next-generation genome re-sequencing data (NGS data), transposon sequence, and reference genome sequence as input, and generates a list of highly reliable candidate insertion sites as well as zygosity information of each insertion. Using a simulated dataset and a case study based on an insertional mutant line from Medicago truncatula, we showed that ITIS performed better in terms of sensitivity and specificity than other similar algorithms such as RelocaTE, RetroSeq, TEMP and TIF. With the case study data, we demonstrated the efficiency of ITIS by validating the presence and zygosity of predicted insertion sites of the Tnt1 transposon within a complex plant system, M. truncatula.

Conclusion

This study showed that ITIS is a robust and powerful tool for forward genetic studies in identifying transposable element insertions causing phenotypes. ITIS is suitable in various systems such as cell culture, bacteria, yeast, insect, mammal and plant.

Electronic supplementary material

The online version of this article (doi:10.1186/s12859-015-0507-2) contains supplementary material, which is available to authorized users.     

SRMBuilder: a user-friendly tool for selected reaction monitoring data analysis

With high sensitivity and reproducibility, selected reaction monitoring (SRM) has become increasingly popular in proteome research for targeted quantification of low abundance proteins and post translational modification. SRM is also well accepted in other mass-spectrometry based research areas such as lipidomics and metabolomics, which necessitates the development of easy-to-use software for both post-acquisition SRM data analysis and quantification result validation. Here, we introduce a software tool SRMBuilder, which can automatically parse SRM data in multiple file formats, assign transitions to compounds, match light/heavy transition/compound pairs and provide a user-friendly graphic interface to manually validate the quantification result at transition/compound/sample level. SRMBuilder will greatly facilitate processing of the post-acquisition data files and validation of quantification result for SRM. The software can be downloaded for free from http://www.proteomics.ac.cn/software/proteomicstools/index.htm as part of the software suite ProteomicsTools.