Plasmonic Biosensor Based on Triangular Au/Ag and Au/Ag/Au Core/Shell Nanoprisms onto Indium Tin Oxide Glass

Gold–silver core–shell triangular nanoprisms (Au/AgTNPs) were grown onto transparent indium tin oxide (ITO) thin film-coated glass substrate through a seed-mediated growth method without using peculiar binder molecules. The resulting Au/AgTNPs were characterized by scanning electron microscopy, atomic force microscopy, X-ray diffraction, UV–vis spectroscopy, and cyclic voltammograms. The peak of dipolar plasmonic resonance was located at near infrared region of ～700 nm, which showed the refractive index (RI) sensitivity of 248 nm/RIU. Moreover, thin gold shells were electrodeposited onto the surface of Au/AgTNPs in order to stabilize nanoparticles. Compared with the Au/AgTNPs, this peak of localized surface plasmon resonance (LSPR) was a little red-shift and decreased slightly in intensity. The refractive index sensitivity was estimated to be 287 nm/RIU, which showed high sensitivity as a LSPR sensing platform. Those triangular nanoprisms deposited on the ITO substrate could be further functionalized to fabricate LSPR biosensors. Results of this research show a possibility of improving LSPR sensor by using core–shell nanostructures.     

Electrospun poly(lactic acid)/chitosan core-shell structure nanofibers from homogeneous solution

The core-shell structure nanofibers of poly(lactic acid)/chitosan with different weight ratios were successfully electrospun from homogeneous solution. The preparation process was more simple and effective than double-needle electrospinning. The nanofibers were obtained with chitosan in shell while poly(lactic acid) in core attributing to phase separation, which were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and energy dispersive spectrometer (EDS). The electrospun nanofibrous membrane was evaluated in vitro by using mouse fibroblasts (L929) as reference cell lines. Cell culture results indicated that these materials were good in promoting cell growth and attachment, thus they could be used for tissue engineering and wound healing dressing.     

Synthesis of chitosan-stabilized gold nanoparticles in the absence/presence of tripolyphosphate

Gold nanoparticles were prepared by reducing gold salt with a polysaccharide, chitosan, in the absence/presence of tripolyphosphate (TPP). Here, chitosan acted as a reducing/stabilizing agent. The obtained gold nanoparticles were characterized with UV--vis spectroscopy and transmission electron microscopy. The results indicated that the shape and size distribution of gold nanoparticles changed with the molecular weight and concentration of chitosan. More interestingly, the gelation of chitosan upon contacting with polyanion (TPP) can also affect the shape and size distribution of gold nanoparticles. By adding TPP to chitosan solution before the reduction of gold salt, gold nanoparticles have a bimodal size distribution, and at the same time, polygonal gold particles were obtained in addition to spherical gold nanoparticles.     

Optical Properties of Core–Shell Gold–Silver and Silver–Gold Nanoparticles for Near UV and Visible Radiation Wavelengths

Modeling of optical properties of spherical core–shell gold–silver and silver–gold nanoparticles (NPs) was carried out based on extended Mie theory for radiation wavelengths in the range 300?≤?λ?≤?650 nm. Efficiency factors of absorption, scattering, and extinction of radiation by core–shell NPs in the range of the radii 5–100 nm and in the range of shell thicknesses 0–40 nm were calculated. Results show the nonlinear dependences of optical properties of core–shell gold–silver and silver–gold nanoparticles on radiation wavelengths, core radii, and shell thicknesses. These results can be applied for photonic technologies of nanoparticles.     

Preparation of gold nanopowders and nanoparticles using chitosan suspensions

Simple methods for preparation of gold nanopowders and nanoparticles are reported. Gold/chitosan nanoparticles were prepared by using basic chitosan suspension as a dispersant and as a reductant. The resulting nanoparticles were processed by pyrolysis and thus obtain black gold nanopowder. The FESEM images indicate that most diameters of the nanopowder prepared were in the range of 50 and 200 nm. Hydrolysis is another quick decomposition method for chitosan. Acetic acid was adopted to implement the hydrolysis. The AEM images of the auberginic suspension show that the average gold nanoparticle diameter was less than 40 nm with good dispersion. Use of chitosan suspensions can produce gold nanopowder as well as gold nanoparticle without using toxic organic chemicals.     

Synthesis of Silver and Gold Nanoparticles Using Cashew Nut Shell Liquid and Its Antibacterial Activity Against Fish Pathogens

This study reveals a green process for the production of multi-morphological silver (Ag NPs) and gold (Au NPs) nanoparticles, synthesized using an agro-industrial residue cashew nut shell liquid. Aqueous solutions of Ag⁺ ions for silver and chloroaurate ions for gold were treated with cashew nut shell extract for the formation of Ag and Au NPs. The nano metallic dispersions were characterized by measuring the surface plasmon absorbance at 440 and 546 nm for Ag and Au NPs. Transmission electron microscopy showed the formation of nanoparticles in the range of 5–20 nm for silver and gold with assorted morphologies such as round, triangular, spherical and irregular. Scanning electron microscopy with energy dispersive spectroscopy and X-ray diffraction analyses of the freeze-dried powder confirmed the formation of metallic Ag and Au NPs in crystalline form. Further analysis by Fourier transform infrared spectroscopy provided evidence for the presence of various biomolecules, which might be responsible for the reduction of silver and gold ions. The obtained Ag and Au NPs had significant antibacterial activity, minimum inhibitory concentration and minimum bactericidal concentration on bacteria associated with fish diseases.     

Intermolecular interactions and morphology of aqueous polymer/surfactant mixtures containing cationic chitosan and nonionic sorbitan esters

In this study, the impact of surfactant molecular composition (saturated sorbitan monolaurate or unsaturated sorbitan monooleate) on polymer/surfactant assemblies was examined. Specifically, the associations between the cationic chitosan and the uncharged surfactants were monitored by surface tension, turbidity, and conductivity measurements. Bright field, confocal laser scanning, and transmission electron microscopy revealed that nanometer-sized chitosan/surfactant aggregates comprised of a chitosan-rich shell and a chitosan-poor core agglomerate at high surfactant concentrations to yield micrometer-scaled supramolecular structures with highly ordered internal structure. The size and architecture of these chitosan/surfactant assemblies were dependent on the structure and concentration of the surfactant employed. The association mechanism among chitosan, surfactant, and the chitosan/surfactant aggregates was discussed in terms of the semirigid polyelectrolyte character of chitosan and the hydrophobic character of sorbitan esters. This study provides important insight into the structural and physical parameters of surfactant that govern the formation of multicompartment polymer/surfactant assemblies.     

CdSe and CdSe/CdS core–shell QDs: New approach for synthesis,investigating optical properties and application in pollutant degradation

In this work, CdSe quantum dots (QDs) were synthesized by a simple and rapid microwave activated approach using CdSO₄, Na₂SeO₃ as precursors and thioglycolic acid (TGA) as capping agent molecule. A novel photochemical approach was introduced for the growth of CdS QDs and this approach was used to grow a CdS shell around CdSe cores for the formation of a CdSe/CdS core–shell structure. The core–shells were structurally verified using X‐ray diffraction, transmission electron microscopy and FTIR (Fourier‐transform infrared (FTIR)) spectroscopy. The optical properties of the samples were examined by means of UV–Vis and photoluminescence (PL) spectroscopy. It was found that CdS QDs emit a broad band white luminescence between 400 to 700 nm with a peak located at about 510 nm. CdSe QDs emission contained a broad band resulting from trap states between 450 to 800 nm with a peak located at 600 nm. After CdS shell growth, trap states emission was considerably quenched and a near band edge emission was appeared about 480 nm. Optical studies revealed that the core–shell QDs possess strong ultraviolet (UV) ? visible light photocatalytic activity. CdSe/CdS core–shell QDs, showed an enhancement in photodegradation of Methyl orange (MO) compared with CdSe QDs.     

Silica‐modified luminescent LaPO4:Eu@LaPO4@SiO2 core/shell nanorods: Synthesis,structural and luminescent properties

Monoclinic‐type tetragonal LaPO₄:Eu (core) and LaPO₄:Eu@LaPO₄ (core/shell) nanorods (NRs) were successfully prepared using a urea‐based co‐precipitation process under ambient conditions. An amorphous silica layer was coated around the luminescent core/shell NRs via the sol–gel process to improve their solubility and colloidal stability in aqueous and non‐aqueous media. The prepared nano‐products were systematically characterized by X‐ray diffraction pattern, transmission electron microscopy, energy dispersive X‐ray analysis, and FTIR, UV/Vis, and photoluminescence spectroscopy to examine their phase purity, crystal phase, surface chemistry, solubility and luminescence characteristics. The length and diameter of the nano‐products were in the range 80–120 nm and 10–15 nm, respectively. High solubility of the silica‐modified core/shell/Si NRs was found for the aqueous medium. The luminescent core NRs exhibited characteristic excitation and emission transitions in the visible region that were greatly affected by surface growth of insulating LaPO₄ and silica layers due to the multiphonon relaxation rate. Our luminescence spectral results clearly show a distinct difference in intensities for core, core/shell, and core/shell/Si NRs. Highly luminescent NRs with good solubility could be useful candidates for a variety of photonic‐based biomedical applications.     

Highly sensitive electrochemiluminescence biosensors for cholesterol detection based on mesoporous magnetic core–shell microspheres

A sensitive electrochemiluminescence (ECL) biosensor for cholesterol detection based on multifunctional core–shell structured microspheres (Fe₃O₄@SiO₂–Au@mpSiO₂) is reported. This microsphere consisted of a core of silica-coated magnetite nanoparticle, an active transition layer of gold nanoparticles and a mesoporous silica shell. Scanning electron microscopy was employed to observe the morphology of the nanomaterials and transmission electron microscopy was used to further confirm the subtle structure of Fe₃O₄@SiO₂–Au@mpSiO₂. The microspheres possessed a large surface area that increased enzyme loading, and an active transition layer gold nanoparticles enhanced the ECL signal. They were used to immobilize cholesterol oxidase for cholesterol detection with a high sensitivity, low detection limit and wide linear range. The linear range was from 0.83 to 2.62 mM with a detection limit of 0.28 µM (S/N = 3). Moreover, the reproducibility, stability and selectivity of the biosensor were established.     

Surface modification of bacterial cellulose nanofibers for property enhancement of optically transparent composites: dependence on acetyl-group DS

Bacterial cellulose (BC) nanofibers were acetylated to enhance the properties of optically transparent composites of acrylic resin reinforced with the nanofibers. A series of BC nanofibers acetylated from degree-of-substitution (DS) 0 to 1.76 were obtained. X-ray diffraction profiles indicated that acetylation proceeded from the surface to the core of BC nanofibers, and scanning electron microscopy images showed that the volume of nanofibers increases by the bulky acetyl group. Since acetylation decreased the refractive index of cellulose, regular transmittance of composites comprised of 63% BC nanofiber was improved, and deterioration at 580 nm because of fiber reinforcement was suppressed to only 3.4%. Acetylation of nanofibers changed their surface properties and reduced the moisture content of the composite to about one-third that of untreated composite, although excessive acetylation increased hygroscopicity. Furthermore, acetylation was found to reduce the coefficient of thermal expansion of a BC sheet from 3 x 10(-6) to below 1 x 10(-6) 1/K.     

Gold nanoparticles-coated magnetic microspheres as affinity matrix for detection of hemoglobin A1c in blood by microfluidic immunoassay

A novel microfluidic immunoassay system for specific detection of hemoglobin A1c (HbA1c) was developed based on a three-component shell/shell/core structured magnetic nanocomposite Au/chitosan/Fe(3)O(4), which was synthesized with easy handling feature of Fe(3)O(4) by magnet, high affinity for gold nanoparticles of chitosan and good immobilization ability for anti-human hemoglobin-A1c antibody (HbA1c mAb) of assembled colloidal gold nanoparticles. The resulting HbA1c mAb/Au/chitosan/Fe(3)O(4) magnetic nanoparticles were then introduced into microfluidic devices coupled with a gold nanoband microelectrode as electrochemical detector. After that, three-step rapid immunoreactions were carried out in the sequence of HbA1c, anti-human hemoglobin antibodies (Hb mAb) and the secondary alkaline phosphatase (AP)-conjugated antibody within 20 min. The current response of 1-naphtol obtained from the reaction between the secondary AP-conjugated antibody and 1-naphthyl phosphate (1-NP) increased proportionally to the HbA1c concentration. Under optimized electrophoresis and detection conditions, HbA1c responded linearly in the concentration of 0.05-1.5 μg mL(-1), with the detection limit of 0.025 μg mL(-1). This system was successfully employed for detection of HbA1c in blood with good accuracy and renewable ability. The proposed method proved its potential use in clinical immunoassay of HbA1c.     

Comparative Theoretical Study of the Optical Properties of Silicon/Gold,Silica/Gold Core/Shell and Gold Spherical Nanoparticles

The scattering and absorption efficiencies of light by individual silicon/gold core/shell spherical nanoparticles in air are analysed theoretically in the framework of Lorenz-Mie formalism. We have addressed the influence of particle-diameter and gold-shell thickness on the scattering and absorption efficiencies of such nano-heterostructures. For comparison, we also considered the famous silica/gold core/shell nanoparticle and pure gold nanoparticle. Our simulation clearly shows that the optical response of the illuminated Si/Au core/shell nanoparticle differs markedly from that of the famous SiO₂/Au heterostructure which in turn does not show a significant difference with that of the pure gold nanoparticle. This difference is clearly evident for shell thickness to outer particle radius ratio of less than 0.5. It manifests itself essentially by the occurrence of a strong and sharp absorption resonance beyond the wavelength of 600 nm where the silica/gold and the pure gold nanoparticles never absorb. The characteristics of this resonance are found to be sensitive to the particle diameter and the shell thickness. In particular, its spectral position can be adjusted over a wide spectral range from the visible to the mid-IR by varying the particle diameter and/or the shell thickness.     

Coexistence of Plasmonic and Magnetic Properties in Bimetallic Fe/Ag Nanoparticles Synthesized by Pulsed Laser Ablation

Fe20:Ag80, Fe50:Ag50, and Fe80:Ag20 bimetallic nanoparticles were prepared with laser ablation method applied on Fe/Ag/polyvinyl alcohol (PVA) composite, at two different ablation times (20 and 50 min). The ratio of Fe with respect to Ag atoms as well as ablation time affect wavelength, intensity, and width of plasmon absorption peak. Increase in Fe content leaded to a redshift and a decrease in intensity and an increase in the width of plasmon absorption peaks. The transmission electron microscopy (TEM) analysis showed three kinds of grains which are Ag nanoparticles, Ag/Fe core/shells and Fe nanoparticles. Due to the concentration of Fe nanoparticles with the size of less than 5 nm around Ag ones with the size of 20 to 30 nm, a core–shell structure of these two metals forms and this decreases Ag plasmon resonance frequency, and as a result, its absorption peak has a redshift. According to the results of vibrating sample magnetometer (VSM), the Fe/Ag bimetallic nanoparticles were superparamagnetic.

     

Chitosan-colloidal gold complexes as polycationic probes for the detection of anionic sites by transmission and scanning electron microscopy

A new cationic colloidal gold complex has been developed for ultrastructural localization of cell surface anionic sites by transmission and scanning electron microscopy. The marker is prepared by labelling gold particles of suitable sizes (6 to 70 nm in diameter) with chitosan, a polymer of beta (1----4)-linked D-glucosamine. Using human red blood cells as a model, chitosan-gold complexes were shown to be specific for anionic sites and at pH 2 for sialic acid residues. The binding capacity of complexes of different sizes with carboxymethyl and phosphorylated celluloses was examined as a function of pH and ionic strength. The results indicated that these complexes can be used under acidic conditions as well as in physiological buffers. The complexes were further tested by transmission and scanning electron microscopy in detecting anionic sites on cells of various origins such as Escherichia coli, Lactobacillus maltaromicus, Lactobacillus reuteri, Saccharomyces cerevisiae, Saccharomyces rouxii, Schizosaccharomyces pombe, Fusarium oxysporum, Catharantus roseus.     

Reviving near infra‐red emission of Ag2S nanoparticles using interfacial defects in the Ag2S@CdS core–shell structure

Ag₂S@CdS core–shell particles were synthesized with different Cd source content as a measure of shell thickness using a pulsed microwave irradiation method. The particles were verified structurally using X‐ray diffraction, energy dispersive X‐ray analysis and transmission electron microscopy. Optical spectroscopy revealed that core–shells show an absorption peak at 750 nm and an emission peak located around 800 nm after 6 min of microwave irradiation. With continued microwave treatment, the NIR luminescence first vanished but it was revived after 12 min of irradiation, which was 100 nm red shifted. This new type of NIR emission in Ag₂S with sizes greater than 5 nm is due to the proximity of a highly deficient CdS shell with strong red emission that was stable for more than 6 months in water. A mechanism has been suggested for this type of emission.     

Oil-encapsulating PEO-PPO-PEO/PEG shell cross-linked nanocapsules for target-specific delivery of paclitaxel

PEO-PPO-PEO/PEG shell cross-linked nanocapsules encapsulating an oil phase in their nanoreservoir structure was developed as a target-specific carrier for a water-insoluble drug, paclitaxel. Oil-encapsulating PEO-PPO-PEO/PEG composite nanocapsules were synthesized by dissolving an oil (Lipiodol) and an amine-reactive PEO-PPO-PEO derivative in dichloromethane and subsequently dispersing in an aqueous solution containing amine-functionalized six-arm-branched poly(ethylene glycol) by ultrasonication. The resultant shell cross-linked nanocapsules had a unique core/shell architecture with an average size of 110.7 +/- 9.9 nm at 37 degrees C, as determined by dynamic light scattering and transmission electron microscopy. Paclitaxel could be effectively solubilized in the inner Lipiodol phase surrounded by a cross-linked PEO-PPO-PEO/PEG shell layer. The paclitaxel-loaded nanocapsules were further conjugated with folic acid to achieve folate receptor targeted delivery. Confocal microscopy and flow cytometric analysis revealed that folate-mediated targeting significantly enhanced the cellular uptake and apoptotic effect against folate receptor overexpressing cancer cells. The present study suggested that these novel nanomaterials encapsulating an oil reservoir could be potentially applied for cancer cell targeted delivery of various water-insoluble therapeutic and diagnostic agents.     

Immunogold-silver staining method for light and electron microscopic detection of lymphocyte cell surface antigens with monoclonal antibodies

We used the immunogold-silver staining method (IGSS) for detection of lymphocyte cell surface antigens with monoclonal antibodies in light and electron microscopy and compared this procedure with the immunogold staining method. Two different sizes of colloidal gold particles (5 nm and 15 nm) were used in this study. Immunolabeling on cell surfaces was visualized as fine granules only by IGSS in light microscopy. The labeling density (silver-gold complexes/cell) and diameters of silver-enhanced gold particles on cell surfaces were examined by electron microscopy. Labeling density was influenced not by the enhancement time of the physical developer but by the size of the gold particles. However, the development of shells of silver-enhanced gold particles correlated with the enhancement time of the physical developer rather than the size of the colloidal gold particles. Five-nm gold particles enhanced with the physical developer for 3 min were considered optimal for this IGSS method because of reduced background staining and high specific staining in the cell suspensions in sheep lymph. Moreover, this method may make it possible to show the ultrastructure of identical positive cells detected in 1-micron sections counterstained with toluidine blue by electron microscopy, in addition to the percentage of positive cells by light microscopy.     

Formation of core/shell nanoparticles with a lipid core and their application as a drug delivery system

A novel preparation method for core/shell nanoparticles with a drug-loaded lipid core was designed and characterized. The lipid core is composed of lecithin and a drug, and the polymeric shell is composed of Pluronics (poly(ethylene oxide)-poly (propylene oxide)-poly(ethylene oxide) triblock copolymer, F-127). For the formation of stabilized core/shell nanoparticles, freeze-drying was performed in the presence of trehalose used as a cryoprotectant. Cryogenic transmittance electron microscopy (cryo-TEM), differential scanning calorimetry (DSC), and a particle size analyzer were used to observe the formation of the stabilized core/shell nanoparticles. For the application of the core/shell nanoparticles as a drug carrier, paclitaxel, a potent anticancer drug, was loaded into the core/shell nanoparticles, and the drug loading amount and the drug release pattern were observed.