Effects of Low Dissolved-Oxygen Concentrations on Poly-(3-Hydroxybutyrate-co-3-Hydroxyvalerate) Production by Alcaligenes eutrophus

The bacterial copolyester poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) was produced with Alcaligenes eutrophus DSM 545 from glucose and sodium propionate in a fed-batch fermentation with both nitrogen limitation and low dissolved-oxygen concentrations. When the dissolved-oxygen content was kept between 1 and 4% of air saturation during the polymer accumulation phase, the yield of 3-hydroxybutyrate (3HB) monomer from glucose was not affected, but the propionate-to-3-hydroxyvalerate (3HV) monomer yield was two to three times (0.48 to 0.73 mol of 3HV mol of propionate consumed(sup-1)) that observed in a control experiment (0.25 mol mol(sup-1)), where the accumulation-phase dissolved-oxygen concentration was 50 to 70% of air saturation. The overall polymer productivity of the fermentation was somewhat decreased by low dissolved-oxygen contents, owing to a slower 3HB production rate. The effect of a low dissolved-oxygen concentration is probably attributable to a reduction of the oxygen-requiring decarbonylation of propionyl-coenzyme A (CoA) to acetyl-CoA.     

Optimization of growth media components for polyhydroxyalkanoate (PHA) production from organic acids by Ralstonia eutropha

We employed systematic mixture analysis to determine optimal levels of acetate, propionate, and butyrate for cell growth and polyhydroxyalkanoate (PHA) production by Ralstonia eutropha H16. Butyrate was the preferred acid for robust cell growth and high PHA production. The 3-hydroxyvalerate content in the resulting PHA depended on the proportion of propionate initially present in the growth medium. The proportion of acetate dramatically affected the final pH of the growth medium. A model was constructed using our data that predicts the effects of these acids, individually and in combination, on cell dry weight (CDW), PHA content (%CDW), PHA production, 3HV in the polymer, and final culture pH. Cell growth and PHA production improved approximately 1.5-fold over initial conditions when the proportion of butyrate was increased. Optimization of the phosphate buffer content in medium containing higher amounts of butyrate improved cell growth and PHA production more than 4-fold. The validated organic acid mixture analysis model can be used to optimize R. eutropha culture conditions, in order to meet targets for PHA production and/or polymer HV content. By modifying the growth medium made from treated industrial waste, such as palm oil mill effluent, more PHA can be produced.     

Polyhydroxybutyrate production in halophilic marine bacteria Vibrio proteolyticus isolated from the Korean peninsula

Polyhydroxybutyrates (PHB) are biodegradable polymers that are produced by various microbes, including Ralstonia, Pseudomonas, and Bacillus species. In this study, a Vibrio proteolyticus strain, which produces a high level of polyhydroxyalkanoate (PHA), was isolated from the Korean marine environment. To determine optimal growth and production conditions, environments with different salinity, carbon sources, and nitrogen sources were evaluated. We found that the use of a medium containing 2% (w/v) fructose, 0.3% (w/v) yeast extract, and 5% (w/v) sodium chloride (NaCl) in M9 minimal medium resulted in high PHA content (54.7%) and biomass (4.94 g/L) over 48 h. Addition of propionate resulted in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(HB-co-HV)) copolymer as propionate acts as a precursor for the HV unit. In these conditions, the bacteria produced poly(3-hydroxybutyrate-co-3-hydroxyvalerate) containing a 15.8% 3HV fraction with 0.3% propionate added as the substrate. To examine the possibility of using unsterilized media with high NaCl content for PHB production, V. proteolyticus was cultured in sterilized and unsterilized conditions. Our results indicated a higher growth, leading to a dominant population in unsterilized conditions and higher PHB production. This study showed the conditions for halophilic PHA producers to be later implemented at a larger scale.

     

盐单胞菌利用短链脂肪酸合成聚羟基脂肪酸酯

盐单胞菌(Halomonas)能够利用多种底物为碳源生长,由于其能在高盐条件下进行不灭菌的开放发酵,已被开发用作下一代生物技术的底盘细胞.包括乙酸、丙酸和丁酸在内的短链挥发性脂肪酸能够以生物质为原料制备,有望成为用于微生物发酵的新型碳源.利用10-50g/L浓度的丁酸为碳源对Halomonas sp.TD01和TD08...     

A novel <Emphasis Type="Italic">Bacillus</Emphasis> sp. accumulating poly (3-hydroxybutyrate-co-3-hydroxyvalerate) from a single carbon substrate

The objective of this paper was to report a bacterium designated as 88D, capable of producing poly (3-hydroxybutyrate-co-3-hydroxyvalerate) [P (3HB-co-3HV)] copolymer from a single carbon source, which was isolated from a municipal sewage treatment plant in Hyderabad, India. This microorganism, based on the phenotypical features and genotypic investigations, was identified as Bacillus sp. The optimal growth of Bacillus sp. 88D occurred between 28 and 30°C and at pH 7. The strain yielded a maximum of 64.62% dry cell weight (DCW) polymer in the medium containing glucose as carbon source, which was followed by 60.46% DCW polymer in glycerol containing medium. Bacillus sp. 88D produced P (3HB-co-3HV) from glucose or glycerol, when they were used as a single carbon substrate. This bacterium produced polyhydrxybutyrate (PHB) when sodium acetate was used as sole carbon substrate. The viscosity average molecular mass (Mv) of the copolymers ranged from 523 to 627 kDa. The physical, chemical and mechanical properties of the biopolymers were characterized.     

Enhancing the 3-hydroxyvalerate component in bioplastic PHBV production by Cupriavidus necator

In the current context of global warming, the substitution of conventional plastics with bioplastics is a challenge. To take up this challenge, we must meet different technical and economic constraints. In the case of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), the technical properties can be modulated by varying the 3-hydroxyvalerate content. 3-Hydroxyvalerate (3-HV) enhancement is an issue; therefore, simultaneous evaluation of several 3-hydroxyvalerate-enhancing substrates through fractional factorial design of experiments is described. Eight substrates citric, valeric, propionic, and levulinic acids; propanol; pentanol; and sodium propionate were studied for 3-HV enhancement, and sodium glutamate was studied for biomass and polyhydroxyalkanoate (PHA) enhancement. The most efficient 3-hydroxyvalerate-enhancing factors were levulinic acid, sodium propionate, and pentanol; however, pentanol, at a concentration of 1 g/L, had an extremely negative influence on biomass production and the PHA content of cells. The effect of the inoculum nutrient composition on the final 3-HVcontent was also evaluated. These results showed that the most efficient combination for the production of high 3-HVcontent in PHBV was primary inoculum growth on mineral medium followed by fermentation for 48 h with levulinic acid and sodium propionate (at 1 g/L) as the only carbon sources. This allowed us to produce PHBV with a 3-HVcontent of 80 mol % and overall volumetric and specific productivities of 2 mg/L/h and 3.9 mg/g(CDW) /h, respectively, with the addition of only 2 g/L of inducing substances.     

Cometabolic biosynthesis of copolyesters consisting of 3-hydroxyvalerate and medium-chain-length 3-hydroxyalkanoates by Pseudomonas sp. DSY-82

A newly isolated strain, designated as Pseudomonas sp. DSY-82, synthesized medium-chain-length polyhydroxyalkanoate (MCL-PHA) copolyesters when grown on alkanoates from hexanoate to undecanoate as the sole carbon source. When used alone, butyrate and valerate supported the growth of the isolate but not PHA production. However, unusual polyesters containing 3-hydroxyvalerate, as well as various MCL 3-hydroxyalkanoate monomeric units, were synthesized when valerate was cofed with either nonanoate or 10-undecenoate, suggesting the formation of monomer units from both substrates. Concentrations of 3-hydroxyvalerate, 3-hydroxyoctanoate, and 3-hydroxydecanoate in the PHAs produced were significantly elevated by the addition of valerate, indicating that the incorporation of these monomer units to PHA occurred primarily through cometabolism. The total amount of these monomer units in the PHAs reached up to 30%. The PHAs produced in this study were most likely random copolyesters as determined by differential scanning calorimetric analysis. This is the first case of microbial synthesis of copolyesters consisting of 3-hydroxyvalerate and MCL 3-hydroxyalkanoate monomer units through cometabolism.     

Biosynthesis of novel terpolymers poly(lactate-co-3-hydroxybutyrate-co-3-hydroxyvalerate)s in lactate-overproducing mutant Escherichia coli JW0885 by feeding propionate as a precursor of 3-hydroxyvalerate

Novel lactate (LA)-based terpolymers, P[LA-co-3-hydroxybutyrate(3HB)-co-3-hydroxyvalerate(3HV)]s (PLBVs), were produced in LA-overproducing mutant, Escherichia coli JW0885, which was found to be a superior host for the efficient production of LA-based polyesters. Recombinant E. coli JW0885 harboring the genes encoding LA-polymerizing enzyme (Ser325Thr/Gln481Lys mutant of polyhydroxyalkanoate synthase from Pseudomonas sp. 61-3) and three monomer supplying enzymes [propionyl-CoA transferase, β-ketothiolase, and nicotinamide adenine dinucleotide phosphate (reduced form) (NADPH)-dependent acetoacetyl-CoA reductase] was aerobically grown on glucose with feeding of propionate as a precursor of 3-hydroxyvaleryl-CoA (3HV-CoA). Gas chromatography and nuclear magnetic resonance (NMR) analyses revealed that polymers accumulated in the cells were composed of LA, 3HB, and 3HV units, thus being identified as terpolymers, PLBVs. In addition, ¹H-NMR analysis suggested the existence of LA-3HV sequence in the terpolymer. When 100 mg/l of sodium propionate was added into the medium, 3HV fraction in the terpolymer linearly reached up to 7.2 mol%, while LA fraction was inversely decreased. This phenomenon could be due to the change in metabolic fluxes of lactyl-CoA (LA-CoA) and 3HV-CoA depending on the concentration of propionate fed into the medium.     

Biosynthesis of polyhydroxyalkanoate copolymers from mixtures of plant oils and 3-hydroxyvalerate precursors

The combination of plant oils and 3-hydroxyvalerate (3HV) precursors were evaluated for the biosynthesis of polyhydroxyalkanoate (PHA) copolymers containing 3HV monomers by Cupriavidus necator H16. Among various mixtures of plant oils and 3HV-precursors, the mixture of palm kernel oil and sodium propionate was suitable for the biosynthesis of high concentration of PHA (6.8gL(-1)) containing 7mol% of 3HV. The 3HV monomer composition can be regulated in the range of 0-23mol% by changing culture parameters such as the initial pH, and the nitrogen source and its concentration. PHA copolymers with high weight-average molecular weights (Mw) ranging from 1,400,000 to 3,100,000Da were successfully produced from mixtures of plant oils and 3HV-precursors. The mixture of plant oils and sodium propionate resulted in PHA copolymers with higher M(w) compared to the mixture of plant oils and sodium valerate. DSC analysis on the PHA containing 3HV monomers showed the presence of two distinct melting temperature (Tm), which indicated that the PHA synthesized might be a blend of P(3HB) and P(3HB-co-3HV). Sodium propionate appears to be the better precursor of 3HV than sodium valerate.     

Production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) in a recombinant Escherichia coli strain.

An Escherichia coli strain has been constructed that produces the copolymer poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) P(HB-co-HV). This has been accomplished by placing the PHB biosynthetic genes from Alcaligenes eutrophus into an E. coli fadR atoC(Con) mutant and culturing the strain in M9 minimal medium containing glucose and propionate. 3-Hydroxyvalerate incorporation is absolutely dependent on the presence of both glucose and propionate, and 3-hydroxybutyrate-3-hydroxyvalerate ratios in the copolymer can be manipulated by altering the propionate concentration and/or the glucose concentration in the culture. P(HB-co-HV) production can be accomplished by using a wide variety of feeding regimens, but the most efficient is to allow the culture to grow to late log phase in minimal medium containing acetate and then add glucose and propionate to initiate copolymer production. A broad range of propionate concentrations can be used in the culture to stimulate 3-hydroxyvalerate incorporation; however, the most efficient utilization of propionate occurs at concentrations below 10 mM. 3-Hydroxyvalerate molar percentages in the copolymer are relatively constant over the course of growth. The copolymer has been purified and confirmed to be P(HB-co-HV) by gas chromatography/mass spectrometry and differential scanning calorimetry.     

Production of a co-polyester of 3-hydroxybutyric acid and 3-hydroxyvaleric acid from succinic acid by Rhodococcus ruber: biosynthetic considerations

The biosynthesis of the 3-hydroxyvalerate (3HV) monomer of polyhydroxyalkanoate by Rhodococcus ruber from succinic acid was investigated using nuclear magnetic resonance analysis. Polymer produced from [2,3-¹³C]- and [1,4-¹³C]succinate showed that the C-1-C-2 and C-4-C-5 fragments of 3HV were derived from carbons 2 and 3 of succinate, essentially without bond cleavage, and carbon 3 of 3HV was derived from a carboxyl carbon of succinate. Using [1,2-¹³C]succinate it was demonstrated that the C-1-C-2 bond of succinate was cleaved during polymer biosynthesis. Methylmalonyl-coenzyme A (CoA) mutase activity was detected in cell-free extracts of R. ruber by enzyme assay and HPLC analysis of reaction products. A pathway, involving the known methylmalonyl-CoA pathway for propionate formation in Propionibacteria, followed by the established pathway for PHA biosynthesis from propionyl-CoA and acetyl-CoA, is proposed for the biosynthesis of 3HV from succinate by R. ruber. Correspondence to: A. J. Anderson     

Production of poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) in a recombinant Escherichia coli strain.

An Escherichia coli strain has been constructed that produces the copolymer poly-(3-hydroxybutyrate-co-3-hydroxyvalerate) P(HB-co-HV). This has been accomplished by placing the PHB biosynthetic genes from Alcaligenes eutrophus into an E. coli fadR atoC(Con) mutant and culturing the strain in M9 minimal medium containing glucose and propionate. 3-Hydroxyvalerate incorporation is absolutely dependent on the presence of both glucose and propionate, and 3-hydroxybutyrate-3-hydroxyvalerate ratios in the copolymer can be manipulated by altering the propionate concentration and/or the glucose concentration in the culture. P(HB-co-HV) production can be accomplished by using a wide variety of feeding regimens, but the most efficient is to allow the culture to grow to late log phase in minimal medium containing acetate and then add glucose and propionate to initiate copolymer production. A broad range of propionate concentrations can be used in the culture to stimulate 3-hydroxyvalerate incorporation; however, the most efficient utilization of propionate occurs at concentrations below 10 mM. 3-Hydroxyvalerate molar percentages in the copolymer are relatively constant over the course of growth. The copolymer has been purified and confirmed to be P(HB-co-HV) by gas chromatography/mass spectrometry and differential scanning calorimetry.     

Biocompatibility of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) copolyesters produced byAlcaligenes sp. MT-16

Poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), copolyesters, with 3-hydroxyvalerate (3HV) contents ranging from 17 to 60 mol%, were produced byAlcaligenes sp. MT-16, and their biocompatibility evaluated by the growth of Chinese hamster ovary (CHO) cells and the adsorption of blood proteins and platelets onto their film surfaces. The number of CHO cells that adhered to and grew on these films was higher with increasing 3HV content. In contrast, the tendency for blood proteins and platelets to adhere to the copolyester surfaces significantly decreased with increasing 3HV content. Examination of the surface morphology using atomic force microscopy revealed that the surface roughness was an important factor in determining the biocompatibility of theses copolyesters. The results obtained in this study suggest that poly(3HB-co-3HV) copolyesters, with >30 mol% 3HV, may be useful in biocompatible biomedical applications.     

真养产碱杆菌合成3-羟基丁酸与3-羟基戊酸共聚物发酵条件研究

在摇瓶条件下,对真养产碱杆菌（Ａｌｃａｌｉｇｅｎｅｓｅｕｔｒｏｐｈｕｓ）的３羟基丁酸与３羟基戊酸共聚物（ＰＨＢＶ）发酵过程中ＨＶ组分的前体物质———丙酸的加入时间和加入量进行了研究,结果表明,ＰＨＢＶ中ＨＶ组分含量与丙酸的加入时间和加入量有密切的关系,丙酸的最佳加入时间为菌体生长阶段结束后的多聚物合成初期;尽管高浓度丙酸下可获得较高的ＨＶ组分含量,但会明显抑制菌体的生长和产物的合成。通过对２Ｌ小罐中ＰＨＢＶ合成阶段流加不同糖／酸比混合液所得的发酵结果的比较,并在综合考虑ＰＨＢＶ浓度、ＨＶ组分含量、生产强度和生产成本等基础上,提出了在ＰＨＢＶ合成期流加液的糖／酸比应随菌体对丙酸利用能力的下降而不断增加的流加策略,在此条件下,细胞干重、ＰＨＢＶ浓度和ＰＨＢＶ含量和ＨＶ摩尔分率分别达到５２１ｇ／Ｌ、４０８ｇ／Ｌ、７８３％和１６２ｍｏｌ％,ＨＶ组分对丙酸的产率系数为０５ｇ／ｇ,ＰＨＢＶ的生产强度达到０７４ｇ／（Ｌ／ｈ）。     

Production of the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with varied composition using different nitrogen sources with Haloferax mediterranei

The extreme haloarchaea Haloferax mediterranei accumulates poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) without the need for specific precursors. In this study, growth kinetics and PHBV synthesis were characterised under nitrogen-excess and nitrogen-limiting conditions in ammonium and, for the first time, nitrate. With excess nitrogen, ammonium and nitrate cultures generated 10.7 g/L biomass containing 4.6 wt% PHBV and 5.6 g/L biomass with 9.3 wt% PHBV, respectively. Copolymer composition varied with the nitrogen source used: PHBV from ammonium cultures had 16.9 mol% 3-hydroxyvalerate (HV), while PHBV from nitrate cultures contained 12.5 mol% HV. Nitrogen limitation was achieved with carbon-to-nitrogen (C/N) molar ratios of 25 or higher. Nitrogen limitation reduced biomass generation and polymer concentration, but polymer accumulation increased to 6.6 and 9.4% for ammonium and nitrate, respectively, with C/N 42. PHBV composition was also affected and cultures with lower C/N ratios produced richer HV polymers. Copolymer formation was not a uniform process: HV was only detected after a minimum accumulation of 0.45 g/L PHB and lasted for a maximum of 48 h. The understanding of copolymer synthesis and the influence of culture conditions such as the nitrogen source will help in designing novel strategies for the production of PHBV with more regular structure and material properties.

     

Biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from structurally unrelated single carbon sources by newly isolated Pseudomonas sp. EL-2

Summary A Pseudomonas sp. EL-2 strain capable of synthesizing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] was isolated from activated sludge. For simulation of P(3HB-co-3HV) production in the cells, deficiency of nutrients such as NH₄ ⁺, SO₄ ^2- and Mg²⁺ was crucial and the maximum content of P(3HB-co-3HV) could reach 46% on NH₄ ⁺-deficient medium. This organism synthesized P(3HB-co-3HV) with 3HV monomer in the range from 1.9 to 49.3 mol% from unrelated single carbon sources such as glucose, fructose, propionate, or sorbitol. P(3HB-co-3HV)s containing a higher fraction of 3HV were produced by adding propionic acid to glucose medium.     

Salmonella typhimurium poultry isolate growth response to propionic acid and sodium propionate under aerobic and anaerobic conditions

Propionic acid and its sodium salt have long been used as additives in poultry feed to reduce microbial populations, including Salmonella spp. Propionic acids in poultry feed may have a potential role in inhibiting growth of Salmonella in the chicken intestine. In this study, we determined growth response of a Salmonella typhimurium poultry isolate to propionic acid and sodium propionate under aerobic and anaerobic conditions. Growth rate consistently decreased with the addition of greater concentrations of either propionic acid or sodium propionate. The extent of growth inhibition was much greater with propionic acid than the sodium form. Media pH decreased only with addition of propionic acid. Growth inhibition was more effective under anaerobic growth conditions with either propionic acid or sodium propionate. When determined at the same pH level, growth rate was significantly lowered by addition of 25 mM of either propionate or sodium propionate alone, and also by the decrease in pH levels (P<0.05). These results showed that growth inhibition of S. typhimurium by propionic acid or sodium propionate is greatly enhanced by pH decrease, and to lesser extent by anaerobiosis. We also found that sodium propionate was more inhibitory for growth of S. typhimurium than propionic acid when compared at the same pH levels.     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.     

Application of acetyl-CoA acetyltransferase (AtoAD) in Escherichia coli to increase 3-hydroxyvalerate fraction in poly(3-hydroxybutyrate-co-3-hydroxyvalerate)

Polyhydroxyalkanoate (PHA) is a family of biodegradable polymers, and incorporation of different monomers can alter its physical properties. To produce the copolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (P(3HB-co-3HV)) containing a high level of 3-hydroxyvalerate (3HV) by altering acetyl-CoA pool levels, we overexpressed an acetyl-CoA acetyltransferase (atoAD) in an engineered E. coli strain, YH090, carrying PHA synthetic genes bktB, phaB, and phaC. It was found that, with introduction of atoAD and with propionate as a co-substrate, 3HV fraction in PHA was increased up to 7.3-fold higher than a strain without atoAD expressed in trans (67.9 mol%). By the analysis of CoA pool concentrations in vivo and in vitro using HPLC and LC-MS, overexpression of AtoAD was shown to decrease the amount of acetyl-CoA and increase the propionyl-CoA/acetyl-CoA ratio, ultimately resulting in an increased 3HV fraction in PHA. Finally, synthesis of P(3HB-co-3HV) containing 57.9 mol% of 3HV was achieved by fed-batch fermentation of YJ101 with propionate.

     

Biosynthesis of poly(3-hydroxybutyrate) copolymers by Azotobacter chroococcum 7B: A precursor feeding strategy

A precursor feeding strategy for effective biopolymer producer strain Azotobacter chroococcum 7B was used to synthesize various poly(3-hydroxybutyrate) (PHB) copolymers. We performed experiments on biosynthesis of PHB copolymers by A. chroococcum 7B using various precursors: sucrose as the primary carbon source, various carboxylic acids and ethylene glycol (EG) derivatives [diethylene glycol (DEG), triethylene glycol (TEG), poly(ethylene glycol) (PEG) 300, PEG 400, PEG 1000] as additional carbon sources. We analyzed strain growth parameters including biomass and polymer yields as well as molecular weight and monomer composition of produced copolymers. We demonstrated that A. chroococcum 7B was able to synthesize copolymers using carboxylic acids with the length less than linear 6C, including poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB-4MHV) using Y-shaped 6C 3-methylvaleric acid as precursor as well as EG-containing copolymers: PHB–DEG, PHB–TEG, PHB–PEG, and PHB–HV–PEG copolymers using short-chain PEGs (with n?≤?9) as precursors. It was shown that use of the additional carbon sources caused inhibition of cell growth, decrease in polymer yields, fall in polymer molecular weight, decrease in 3-hydroxyvalerate content in produced PHB–HV–PEG copolymer, and change in bacterial cells morphology that were depended on the nature of the precursors (carboxylic acids or EG derivatives) and the timing of its addition to the growth medium.