BCL2 interaction with actin in vitro may inhibit cell motility by enhancing actin polymerization

In addition to its well-defined role as an antagonist in apoptosis, we propose that BCL2 may act as an intracellular suppressor of cell motility and adhesion under certain conditions. Our evidence shows that, when overexpressed in both cancer and non-cancer cells, BCL2 can form a complex with actin and gelsolin that functions to decrease gelsolin-severing activity to increase actin polymerization and, thus, suppress cell adhesive processes. The linkage between increased BCL2 and increased actin polymerization on the one hand and suppression of cell adhesion, spreading and motility on the other hand, is a novel observation that may provide a plausible explanation for why BCL2 overexpression in some tumors is correlated with improved patient survival. In addition, we have identified conditions in vitro in which F-actin polymerization can be increased while cell motility is reduced. These findings underscore the possibility that BCL2 may be involved in modulating cytoskeleton reorganization and may provide an opportunity to explore signal transduction pathways important for cell adhesion and migration and to develop small molecule therapies for suppression of cancer metastasis.Key words: BCL2, actin polymerization, cell motility, adhesion     

Profilin enhances Cdc42-induced nucleation of actin polymerization

We find that profilin contributes in several ways to Cdc42-induced nucleation of actin filaments in high speed supernatant of lysed neutrophils. Depletion of profilin inhibited Cdc42-induced nucleation; re-addition of profilin restored much of the activity. Mutant profilins with a decreased affinity for either actin or poly-l-proline were less effective at restoring activity. Whereas Cdc42 must activate Wiskott-Aldrich Syndrome protein (WASP) to stimulate nucleation by the Arp2/3 complex, VCA (verpolin homology, cofilin, and acidic domain contained in the COOH-terminal fragment of N-WASP) constitutively activates the Arp2/3 complex. Nucleation by VCA was not inhibited by profilin depletion. With purified N-WASP and Arp2/3 complex, Cdc42-induced nucleation did not require profilin but was enhanced by profilin, wild-type profilin being more effective than mutant profilin with reduced affinity for poly-l-proline.Nucleation by the Arp2/3 complex is a function of the free G-actin concentration. Thus, when profilin addition decreased the free G-actin concentration, it inhibited Cdc42- and VCA-induced nucleation. However, when profilin was added with G-actin in a ratio that maintained the initial free G-actin concentration, it increased the rate of both Cdc42- and VCA-induced nucleation. This enhancement, also seen with purified proteins, was greatest when the free G-actin concentration was low. These data suggest that under conditions present in intact cells, profilin enhances nucleation by activated Arp2/3 complex.     

The polymerization of actin. A study of the nucleation reaction.

We compared the properties of the nuclei that accumulate in 7.5 mM-KCl in ATP-G-actin solutions and of the oligomers that are formed by sonication of either G-actin or F-actin. We found that the ability of the above species to prime the polymerization of actin decays with different rates. The nuclei are stable in 7.5 mM-KCl (they decay with a rate constant of 1.5 X 10(-3) s -1 at pH 7.8 at 22 degrees C in the absence of KCl). The oligomers formed by sonication of either G-actin or F-actin, once the sonication is stopped, revert to simpler structures or evolve into F-actin, depending on the KCl concentration in which they are kept. In 10.5 mM-KCl at pH 7.8 at 22 degrees C their priming ability decays with a rate constant of 6 X 10(-3) s -1. We propose that the nuclei that form spontaneously in 7.5 mM-KCl are not directly susceptible to elongation. They must first be converted into activated nuclei, which exist in very low concentration at the steady state. The activated nuclei are directly susceptible to elongation, they have a short life and they decay rapidly into the ground state unless the elongation reaction occurs. Sonication displaces the steady-state concentration in favour of the activated state.     

BCL2 interaction with actin in vitro may inhibit cell motility by enhancing actin polymerization

In addition to its well-defined role as an antagonist in apoptosis, we propose that BCL2 may act as an intracellular suppressor of cell motility and adhesion under certain conditions. Our evidence shows that, when over-expressed in both cancer and non-cancer cells, BCL2 can form a complex with actin and gelsolin that functions to decrease gelsolin-severing activity to increase actin polymerization, and, thus, suppress cell adhesive processes. The linkage between increased BCL2 and increased actin polymerization on the one hand, and suppression of cell adhesion, spreading, and motility on the other hand, is a novel observation that may provide a plausible explanation for why BCL2 over-expression in some tumors is correlated with improved patient survival. In addition, we have identified conditions in vitro in which F-actin polymerization can be increased while cell motility is reduced. These findings underscore the possibility that BCL2 may be involved in modulating cytoskeleton reorganization, and may provide an opportunity to explore signal transduction pathways important for cell adhesion and migration and to develop small molecule therapies for suppression of cancer metastasis.     

Influence of phalloidin on both the nucleation and the elongation phase of actin polymerization

Phalloidin, a heptapeptide from the mushroom Amanita phalloides, increased the velocity of actin polymerization, but slightly decreased the velocity of elongation (polymerization onto sonicated F-actin). A plot of log polymerization velocity vs. log actin concentration was less steep in the presence of phalloidin than in its absence, suggesting that the filament nucleus is smaller in the presence of phalloidin than in its absence.     

Fesselin, a synaptopodin-like protein, stimulates actin nucleation and polymerization.

Fesselin is a proline-rich actin binding protein that has recently been isolated from smooth muscle [Leinweber, B. D., Fredricksen, R. S., Hoffman, D. R., and Chalovich, J. M. (1999) J. Muscle Res. Cell Motil. 20, 539-545]. Fesselin is similar to synaptopodin [Mundel, P., Heid, H. W., Mundel, T. M., Krüger, M., Reiser, J., and Kriz, W. (1997) J. Cell Biol. 139, 193-204] in terms of its size, isoelectric point, and sequence although synaptopodin is not present in smooth muscle. The function of fesselin is unknown. Evidence is presented here that fesselin accelerates the polymerization of actin. Fesselin was effective on actin isolated from either smooth or skeletal muscle at low ionic strength and in the presence of 100 mM KCl. At low ionic strength, fesselin decreased the time for 50% polymerization to about 1% of that in the absence of fesselin. The lag phase characteristic of the slow nucleation process of polymerization was eliminated as the fesselin concentration was increased from very low levels. Fesselin did not alter the critical concentration for actin but did increase the rate of elongation by approximately 3-fold. The increase in elongation rate constant is insufficient to account for the total increase in polymerization rate. It is likely that fesselin stabilizes the formation of actin nuclei. Time courses of actin polymerization at varied fesselin concentrations and varied actin concentrations were simulated by increasing the rate of nucleation and both the forward and reverse rate constants for elongation.     

Exogenous nucleation sites fail to induce detectable polymerization of actin in living cells

Most nonmuscle cells are known to maintain a relatively high concentration of unpolymerized actin. To determine how the polymerization of actin is regulated, exogenous nucleation sites, prepared by sonicating fluorescein phalloidin-labeled actin filaments, were microinjected into living Swiss 3T3 and NRK cells. The nucleation sites remained as a cluster for over an hour after microinjection, and caused no detectable change in the phase morphology of the cell. As determined by immunofluorescence specific for endogenous actin and by staining cells with rhodamine phalloidin, the microinjection induced neither an extensive polymerization of endogenous actin off the nucleation sites, nor changes in the distribution of actin filaments. In addition, the extent of actin polymerization, as estimated by integrating the fluorescence intensities of bound rhodamine phalloidin, did not appear to be affected. To determine whether the nucleation sites remained active after microinjection, cells were first injected with nucleation sites and, following a 20-min incubation, microinjected with monomeric rhodamine-labeled actin. The rhodamine-labeled actin became extensively associated with the nucleation sites, suggesting that at least some of the nucleation activity was maintained, and that the endogenous actin behaved in a different manner from the exogenous actin subunits. Similarly, when cells containing nucleation sites were extracted and incubated with rhodamine-labeled actin, the rhodamine-labeled actin became associated with the nucleation sites in a cytochalasin-sensitive manner. These observations suggest that capping and inhibition of nucleation cannot account for the regulation of actin polymerization in living cells. However, the sequestration of monomers probably plays a crucial role.     

Identification of actin nucleation activity and polymerization inhibitor in ameboid cells: their regulation by chemotactic stimulation

Actin polymerization occurs in amebae of Dictyostelium discoideum after chemotactic stimulation (Hall, A. L., A. Schlein, and J. Condeelis. 1988. J. Cell. Biochem. 37:285-299). When cells are lysed with Triton X-100 during stimulation, an actin nucleation activity is detected in lysates by measuring the rate of pyrene-labeled actin polymerization. This stimulated nucleation activity is closely correlated with actin polymerization observed in vivo in its kinetics, developmental regulation, and cytochalasin D sensitivity. Actin polymerization is coordinate with pseudopod extension in synchronized populations of cells and is correlated with the accumulation of F actin in pseudopods. The stimulated actin nucleation activity is present in low-speed pellets from Triton lysates (cytoskeletons) within 3 s of stimulation and is stable compared with the nucleation activity of whole cell lysates. Low-speed supernatants contain a reversible inhibitor of the actin nucleation activity that is itself regulated by chemotactic stimulation. Neither activity requires Ca2+ and both are fully expressed in 10 mM EGTA. Fractions containing the inhibitor do not sever actin filaments but do inhibit actin polymerization that is seeded by fragments of purified F actin. These results indicate that chemotactic stimulation of Dictyostelium discoideum generates both an actin-nucleating activity and an actin-polymerization inhibitor, and suggest that the parallel regulation of these two activities leads to the transient phases of actin polymerization observed in vivo. The different compartmentation of these two activities may account for polarized pseudopod extension in gradients of chemoattractant.     

Tropomyosin inhibits the rate of actin polymerization by stabilizing actin filaments

Tropomyosin inhibition of the rate of spontaneous polymerization of actin is associated with binding of tropomyosin to actin filaments. Rate constants determined by using a direct electron microscopic assay of elongation showed that alpha alpha- and alpha beta-tropomyosin have a small or no effect on the rate of elongation at either end of the filaments. The most likely explanation for the inhibition of the rate of polymerization of actin in bulk samples is that tropomyosin reduces the number of filament ends by mechanical stabilization of the filaments.     

Probing actin polymerization by intermolecular cross-linking

We have used N,N'-1,4-phenylenebismaleimide, a bifunctional sulfhydryl cross-linking reagent, to probe the oligomeric state of actin during the early stages of its polymerization into filaments. We document that one of the first steps in the polymerization of globular monomeric actin (G-actin) under a wide variety of ionic conditions is the dimerization of a significant fraction of the G-actin monomer pool. As polymerization proceeds, the yield of this initial dimer ("lower" dimer with an apparent molecular mass of 86 kD by SDS-PAGE [LD]) is attenuated, while an actin filament dimer ("upper" dimer with an apparent molecular mass of 115 kD by SDS-PAGE [UD] as characterized [Elzinga, M., and J. J. Phelan. 1984. Proc. Natl. Acad. Sci. USA. 81:6599-6602]) is formed. This shift from LD to UD occurs concomitant with formation of filaments as assayed by N-(1-pyrenyl)iodoacetamide fluorescence enhancement and electron microscopy. Isolated cross-linked LD does not form filaments, while isolated cross-linked UD will assemble into filaments indistinguishable from those polymerized from unmodified G-actin under typical filament-forming conditions. The presence of cross-linked LD does not effect the kinetics of polymerization of actin monomer, whereas cross-linked UD shortens the "lag phase" of the polymerization reaction in a concentration-dependent fashion. Several converging lines of evidence suggest that, although accounting for a significant oligomeric species formed during early polymerization, the LD is incompatible with the helical symmetry defining the mature actin filament; however, it could represent the interfilament dimer found in paracrystalline arrays or filament bundles. Furthermore, the LD is compatible with the unit cell structure and symmetry common to various types of crystalline actin arrays (Aebi, U., W. E. Fowler, G. Isenberg, T. D. Pollard, and P. R. Smith. 1981. J. Cell Biol. 91:340-351) and might represent the major structural state in which a mutant beta-actin (Leavitt, J., G. Bushar, T. Kakunaga, H. Hamada, T. Hirakawa, D. Goldman, and C. Merril. 1982. Cell. 28:259-268) is arrested under polymerizing conditions.     

Vanadate stimulates monocytic differentiation activity of IL-6 by enhancing actin filament polymerization in HL-60 cells

IL-6 is involved in the control of differentiation of the acute promyelocytic leukemia cell line, HL-60. However, the participation of protein tyrosine phosphatase (PTP) in the monocytic differentiation activity of IL-6 at low concentrations has not been well clarified. In the present study, we demonstrate that IL-6 (10 ng/ml) alone increased cell growth without differentiation. In the presence of vanadate (10 µM), a PTP inhibitor, IL-6 induced pronounced G0/G1 cell cycle arrest; this effect was associated with CD14+ monocytic differentiation as well as F-actin filament polymerization. Furthermore, vanadate potentiated IL-6-signaling pathway by increasing the tyrosine phosphorylated levels of STAT3 (Tyr705), and Lyn. Such induction of Lyn kinase activity resulted from hypophosphorylated tyrosine (Tyr507) at its negative regulatory site. Vanadate also cooperated with IL-6 to form a protein complex containing Lyn and an actinassociated protein, AFAP110. A complex between Lyn and AFAP110 may serve to regulate F-actin filament polymerization. In conclusion, inhibition of PTP by vanadate promotes hematopoietic differentiation activity of IL-6 through modulating multiple signalings, particularly actin filament polymerization.     

Changes in OD at 235 nm do not correspond to the polymerization step of actin

Discrepancies were observed when the polymerization of rabbit muscle actin was monitored by delta OD235 and viscometry (eta). For example, in the presence of (beta,gamma)-methyleno ATP, the delta OD signal was as large as with ATP although polymerization was very poor (eta 1.1, compared with eta = 1.7 in the presence of ATP). Furthermore, when monomeric actin, kept for 1 h in the presence of a stoichiometric equivalent of ADP, was exposed to conditions favoring polymerization (addition of MgCl2), a considerable delta OD235 signal appeared, although the actin had completely lost its polymerizability (eta = 1.0). We conclude that the observed changes in OD235 cannot reflect polymerization itself, but must be caused by another reaction preceding the assembly. Under normal conditions, this reaction is supposed to be the slowest step of filament formation and so to determine the velocity of the whole process. In conclusion, monitoring of actin polymerization by delta OD235 is a valid method only when polymerization has been assessed by another, independent method.     

Inhibition of actin polymerization by latrunculin A

Latrunculin A, a toxin purified from the red sea sponge Latrunculia magnifica, was found previously to induce striking reversible changes in the morphology of mammalian cells in culture and to disrupt the organization of their microfilaments. We now provide evidence that latrunculin A affects the polymerization of pure actin in vitro in a manner consistent with the formation of a 1:1 molar complex between latrunculin A and G-actin. The equilibrium dissociation constant (Kd) for the reaction in vitro is about 0.2 microM whereas the effects of the drug on cultured cells are detectable at concentrations in the medium of 0.1-1 microM.     

pH control of actin polymerization by cofilin

Cofilin, a 21,000 molecular weight actin-regulatory protein (Nishida, E., Maekawa, S., and Sakai, H. (1984) Biochemistry 23, 5307-5313), was here shown to be capable of reversibly controlling actin polymerization and depolymerization in a pH-sensitive manner. When cofilin was reacted with F-actin at different pH, the depolymerized actin concentration (= monomeric actin concentration) was higher at elevated pH. At pH less than 7.3, the monomeric actin concentrations did not exceed approximately 1 microM even in the presence of excess amounts of cofilin, whereas at pH greater than 7.3 it increased in proportion to the concentration of cofilin added, and complete depolymerization of F-actin occurred by the addition of an excess amount of cofilin. Moreover, in the presence of cofilin, rapid interconversion of monomeric and polymeric forms of actin can be induced by simply changing the pH of the medium. Thus, this study provides a new possible mechanism regulating actin polymerization, pH control.     

Modulation of actin polymerization by the spectrin-band 4.1 complex

The effect of human erythrocyte spectrin dimer and band 4.1 on the polymerization of actin was studied by two independent methods: by following the increase in fluorescence of actin covalently conjugated to N-pyrenyl-iodoacetamide (pyrenylactin) and by following the increase in light scattered by actin polymers. Both techniques indicated that the complex of spectrin dimer and band 4.1, but neither spectrin nor band 4.1 alone, stimulates the rate of nucleation (decreases the lag phase of polymerization) and stabilizes oligomers of F-actin. While the band 4.1-spectrin complex, but not spectrin alone, had no immediate effect on the rate of polymerization after the lag phase, it eventually decreases the rate of actin filament growth when the molecular ratio of actin-spectrin-band 4.1 approaches the physiological range. The complex has no detectable effect on the critical actin concentration and does not significantly alter the apparent order of the nucleation reaction.     

Cell motility driven by actin polymerization.

Certain kinds of cellular movements are apparently driven by actin polymerization. Examples include the lamellipodia of spreading and migrating embryonic cells, and the bacterium Listeria monocytogenes, that propels itself through its host's cytoplasm by constructing behind it a polymerized tail of cross-linked actin filaments. Peskin et al. (1993) formulated a model to explain how a polymerizing filament could rectify the Brownian motion of an object so as to produce unidirectional force (Peskin, C., G. Odell, and G. Oster. 1993. Cellular motions and thermal fluctuations: the Brownian ratchet. Biophys. J. 65:316-324). Their "Brownian ratchet" model assumed that the filament was stiff and that thermal fluctuations affected only the "load," i.e., the object being pushed. However, under many conditions of biological interest, the thermal fluctuations of the load are insufficient to produce the observed motions. Here we shall show that the thermal motions of the polymerizing filaments can produce a directed force. This "elastic Brownian ratchet" can explain quantitatively the propulsion of Listeria and the protrusive mechanics of lamellipodia. The model also explains how the polymerization process nucleates the orthogonal structure of the actin network in lamellipodia.     

Stimulation of actin polymerization by filament severing

The extent and dynamics of actin polymerization in solution are calculated as functions of the filament severing rate, using a simple model of in vitro polymerization. The model is solved by both analytic theory and stochastic-growth simulation. The results show that severing essentially always enhances actin polymerization by freeing up barbed ends, if barbed-end cappers are present. Severing has much weaker effects if only pointed-end cappers are present. In the early stages of polymerization, the polymerized-actin concentration grows exponentially as a function of time. The exponential growth rate is given in terms of the severing rate, and the latter is given in terms of the maximum slope in a polymerization time course. Severing and branching are found to act synergistically.     

Dynamics of membranes driven by actin polymerization

A motile cell, when stimulated, shows a dramatic increase in the activity of its membrane, manifested by the appearance of dynamic membrane structures such as lamellipodia, filopodia, and membrane ruffles. The external stimulus turns on membrane bound activators, like Cdc42 and PIP2, which cause increased branching and polymerization of the actin cytoskeleton in their vicinity leading to a local protrusive force on the membrane. The emergence of the complex membrane structures is a result of the coupling between the dynamics of the membrane, the activators, and the protrusive forces. We present a simple model that treats the dynamics of a membrane under the action of actin polymerization forces that depend on the local density of freely diffusing activators on the membrane. We show that, depending on the spontaneous membrane curvature associated with the activators, the resulting membrane motion can be wavelike, corresponding to membrane ruffling and actin waves, or unstable, indicating the tendency of filopodia to form. Our model also quantitatively explains a variety of related experimental observations and makes several testable predictions.     

Reinvestigation of the inhibition of actin polymerization by profilin

In buffer containing 50 mM KCl, 1 mM MgCl2, 1 mM EGTA, 5 mM imidazole, pH 7.5, 0.1 mM CaCl2, 0.2 mM dithiothreitol, 0.01% NaN3, and 0.2 mM ATP, the KD for the formation of the 1:1 complex between Acanthamoeba actin and Acanthamoeba profilin was about 5 microM. When the actin was modified by addition of a pyrenyl group to cysteine 374, the KD increased to about 40 microM but the critical concentration (0.16 microM) was unchanged. The very much lower affinity of profilin for modified actin explains the anomalous critical concentrations curves obtained for 5-10% pyrenyl-labeled actin in the presence of profilin and the apparently weak inhibition by profilin of the rate of filament elongation when polymerization is quantified by the increase in fluorescence of pyrenyl-labeled actin. Light-scattering assays of the polymerization of unmodified actin in the absence and presence of profilin gave a similar value for the KD (about 5-10 microM) when determined by the increase in the apparent critical concentration of F-actin at steady state at all concentrations of actin up to 20 microM and by the inhibition of the initial rates of polymerization of actin nucleated by either F-actin or covalently cross-linked actin dimer. In the same buffer, but with ADP instead of ATP, the critical concentration of actin was higher (4.9 microM) and the KD of the profilin-actin complex was lower for both unmodified (1-2 microM) and 100% pyrenyl-labeled actin (4.9 microM).     

An actin nucleation mechanism mediated by Bni1 and profilin

Formins are required for cell polarization and cytokinesis, but do not have a defined biochemical activity. In Saccharomyces cerevisiae, formins and the actin-monomer-binding protein profilin are specifically required to assemble linear actin structures called 'actin cables'. These structures seem to be assembled independently of the Arp2/3 complex, the only well characterized cellular mediator of actin nucleation. Here, an activated yeast formin was purified and found to promote the nucleation of actin filaments in vitro. Formin-dependent actin nucleation was stimulated by profilin. Thus, formin and profilin mediate actin nucleation by an Arp2/3-independent mechanism. These findings suggest that distinct actin nucleation mechanisms may underlie the assembly of different actin cytoskeletal structures.