Joint use of small-angle X-ray and neutron scattering to study biological macromolecules in solution

Novel techniques for simultaneous analysis of X-ray and neutron scattering patterns from macromolecular complexes in solution are presented. They include ab initio shape and internal structure determination of multicomponent particles and more detailed rigid body modeling of complexes using high resolution structures of subunits. The methods fit simultaneously X-ray and neutron scattering curves including contrast variation data sets from selectively deuterated complexes. Biochemically sound interconnected models without steric clashes between the components displaying a pre-defined symmetry are generated. For rigid body modeling, distance restraints between specified residues/nucleotides or their ranges are taken into account. The efficiency of the methods is demonstrated in model examples, and potential sources of ambiguity are discussed.     

Intense fusion neutron sources

The review describes physical principles underlying efficient production of free neutrons, up-to-date possibilities and prospects of creating fission and fusion neutron sources with intensities of 10¹⁵–10²¹ neutrons/s, and schemes of production and application of neutrons in fusion-fission hybrid systems. The physical processes and parameters of high-temperature plasmas are considered at which optimal conditions for producing the largest number of fusion neutrons in systems with magnetic and inertial plasma confinement are achieved. The proposed plasma methods for neutron production are compared with other methods based on fusion reactions in nonplasma media, fission reactions, spallation, and muon catalysis. At present, intense neutron fluxes are mainly used in nanotechnology, biotechnology, material science, and military and fundamental research. In the near future (10–20 years), it will be possible to apply high-power neutron sources in fusion-fission hybrid systems for producing hydrogen, electric power, and technological heat, as well as for manufacturing synthetic nuclear fuel and closing the nuclear fuel cycle. Neutron sources with intensities approaching 10²⁰ neutrons/s may radically change the structure of power industry and considerably influence the fundamental and applied science and innovation technologies. Along with utilizing the energy produced in fusion reactions, the achievement of such high neutron intensities may stimulate wide application of subcritical fast nuclear reactors controlled by neutron sources. Superpower neutron sources will allow one to solve many problems of neutron diagnostics, monitor nano-and biological objects, and carry out radiation testing and modification of volumetric properties of materials at the industrial level. Such sources will considerably (up to 100 times) improve the accuracy of neutron physics experiments and will provide a better understanding of the structure of matter, including that of the neutron itself.     

Nuclear magnetic resonance in the era of structural genomics

Current interests in structural genomics, and the associated need for high through-put structure determination methods, offer an opportunity to examine new nuclear magnetic resonance (NMR) methodology and the impact this methodology can have on structure determination of proteins. The time required for structure determination by traditional NMR methods is currently long, but improved hardware, automation of analysis, and new sources of data such as residual dipolar couplings promise to change this. Greatly improved efficiency, coupled with an ability to characterize proteins that may not produce crystals suitable for investigation by X-ray diffraction, suggests that NMR will play an important role in structural genomics programs.     

SDSL-ESR-based protein structure characterization

As proteins are key molecules in living cells, knowledge about their structure can provide important insights and applications in science, biotechnology, and medicine. However, many protein structures are still a big challenge for existing high-resolution structure-determination methods, as can be seen in the number of protein structures published in the Protein Data Bank. This is especially the case for less-ordered, more hydrophobic and more flexible protein systems. The lack of efficient methods for structure determination calls for urgent development of a new class of biophysical techniques. This work attempts to address this problem with a novel combination of site-directed spin labelling electron spin resonance spectroscopy (SDSL-ESR) and protein structure modelling, which is coupled by restriction of the conformational spaces of the amino acid side chains. Comparison of the application to four different protein systems enables us to generalize the new method and to establish a general procedure for determination of protein structure.     

New opportunities in integrative structural modeling

Integrative structural modeling enables structure determination of macromolecules and their complexes by integrating data from multiple sources. It has been successfully used to characterize macromolecular structures when a single structural biology technique was insufficient. Recent developments in cellular structural biology, including in-cell cryo-electron tomography and artificial intelligence-based structure prediction, have created new opportunities for integrative structural modeling. Here, we will review these opportunities along with the latest developments in integrative modeling methods and their applications. We also highlight open challenges and directions for further development.     

Developments in fiber diffraction.

Improved specimen preparation methods, third generation synchrotron sources, new data processing algorithms and molecular dynamics refinement techniques are, together, allowing the high-resolution structure determination of larger and larger macromolecular complexes by fiber diffraction. New synchrotron sources are also making possible both time-resolved studies and studies of ordered fibers only a few microns in diameter.     

Extraction, analysis and interpretation of intracrystalline amino acids from fossils

A new protocol for the extraction and analysis of intracrystalline macromolecules has been developed that allows the rapid determination of the amino-acid composition of fossils. The technique utilizes decalcification with 2 M HCI, characterization of the soluble fraction of the biomolecules by automated amino-acid analysis, and differentiation using multivariate statistics. Compared to other methods, this technique allows sampling of indigenous degraded proteins in addition to the preserved remains of peptides, leading to the recovery of data from more reliable indigenous sources. Although the extraction method is demonstrated using fossil samples to demonstrate gross phylogenetic differences, there is much potential to use these biomolecules for a wide range of applications. □ Amino acids, brachiopods, fossil biomolecules, molecular phylogeny.     

Protein structure prediction in genomics

As the number of completely sequenced genomes rapidly increases, including now the complete Human Genome sequence, the post-genomic problems of genome-scale protein structure determination and the issue of gene function identification become ever more pressing. In fact, these problems can be seen as interrelated in that experimentally determining or predicting or the structure of proteins encoded by genes of interest is one possible means to glean subtle hints as to the functions of these genes. The applicability of this approach to gene characterisation is reviewed, along with a brief survey of the reliability of large-scale protein structure prediction methods and the prospects for the development of new prediction methods.     

Unusual zwitterionic catalytic site of SARS–CoV-2 main protease revealed by neutron crystallography

The main protease (3CL M^pro) from SARS–CoV-2, the etiological agent of COVID-19, is an essential enzyme for viral replication. 3CL M^pro possesses an unusual catalytic dyad composed of Cys¹⁴⁵ and His⁴¹ residues. A critical question in the field has been what the protonation states of the ionizable residues in the substrate-binding active-site cavity are; resolving this point would help understand the catalytic details of the enzyme and inform rational drug development against this pernicious virus. Here, we present the room-temperature neutron structure of 3CL M^pro, which allowed direct determination of hydrogen atom positions and, hence, protonation states in the protease. We observe that the catalytic site natively adopts a zwitterionic reactive form in which Cys¹⁴⁵ is in the negatively charged thiolate state and His⁴¹ is doubly protonated and positively charged, instead of the neutral unreactive state usually envisaged. The neutron structure also identified the protonation states, and thus electrical charges, of all other amino acid residues and revealed intricate hydrogen-bonding networks in the active-site cavity and at the dimer interface. The fine atomic details present in this structure were made possible by the unique scattering properties of the neutron, which is an ideal probe for locating hydrogen positions and experimentally determining protonation states at near-physiological temperature. Our observations provide critical information for structure-assisted and computational drug design, allowing precise tailoring of inhibitors to the enzyme''s electrostatic environment.     

'Cool' crystals: macromolecular cryocrystallography and radiation damage

Macromolecular crystals commonly suffer rapid radiation damage during room temperature X-ray data collection. Therefore, data are now routinely collected with the sample held at around 100K, significantly reducing secondary radiation damage, and usually resulting in higher resolution and better quality data. At synchrotron sources, the frequent observation of radiation damage even at cryotemperatures has prompted the development of exciting new experiments aimed at characterising and reducing this damage, and using it for structure determination and enzymatic studies. Current research into cryotechniques seeks to understand the basic physical and chemical processes involved in flash-cooling and radiation damage, which should eventually enable the rational optimisation of cryoprotocols.     

蛋白质晶体学技术的发展与展望

从50年前英国科学家解析出第一个蛋白质晶体结构以来,蛋白质晶体学历经数个里程碑式的发展,已经成为一门成熟的高科技学科,是结构生物学的主要研究手段。近年来结构生物学发展迅速并和其他学科相互渗透交叉,特别是受到结构基因组学等热点学科的极大带动。作为结构生物学的基本手段和技术,蛋白质晶体学从解析简单的蛋白质三维结构延伸到解决各类生物大分子及复合物结构,并更加注重研究结构与功能之间的相互关系,派生出诸如基于结构的药物设计等应用性很强的分支。生物技术及计算机技术的飞速发展,尤其是高通量技术在生物学领域的应用,为蛋白质晶体学带来了全新的概念和更加广阔的前景。文章将主要介绍蛋白质晶体学技术的一些历史发展以及对未来的展望。     

Techniques for boron determination and their application to the analysis of plant and soil samples

This paper reviews techniques for determining B concentration and isotopic ratio and their application to soil and plant samples. Boron concentration has been determined utilising spectrophotometry, potentiometry, chromatography, flame atomic emission and absorption spectrometry, inductively coupled plasma (ICP) optical emission (OES) and mass spectrometry (MS), and neutron activation analysis using neutron radiography and prompt- activation analysis. Isotopic ratios of B have been measured by ICP–MS, thermal ionisation mass spectrometry (TIMS) and secondary ion mass spectrometry (SIMS). For isotopic measurements, TIMS and SIMS are more sensitive and provide higher degrees of accuracy and resolution than ICP–MS, however, extensive sample preparation and purification, and time-consuming measurements limit their usefulness for routine analyses.While the spectrophotometric technique using a colorimetric reaction of B with azomethine-H has been the most extensively applied B determination method for soil and plant samples, colorimetric methods, in general, suffer from numerous interferences and have poor sensitivity and precision. The prompt- method can determine B concentration in intact samples which enables this method to be especially useful for some applications in agriculture. Research involving B behaviour in plant and soil environments would benefit from this technology. In recent years, the use of ICP–OES and ICP–MS for B determination in plant and soil samples has grown tremendously. The application of ICP–OES brought a significant improvement in B analysis because of its simplicity, sensitivity and multielement detection capability. However, besides matrix interferences, the two most sensitive emission lines for B suffer strong spectral interference from Fe. The ICP–OES is not adequately sensitive for some nutritional work involving low B concentrations and B translocation studies using the isotope tracer technique.Plasma is one of the most effective analyte ionisers and MS is the most sensitive ion detector. Coupling of plasma with MS resulted in the development of plasma source MS technology (ICP–MS) which has outperformed all previous analytical methods for trace element determination. Boron determination by ICP–MS suffers no spectroscopic interferences, and is considered the most practical and convenient technique for B isotope determination. The ability of ICP–MS to measure isotopic ratios as well as B concentration enables: (1) B concentration determination by the isotope dilution method, (2) verification of B concentration by isotope fingerprinting in routine analysis and (3) determination of total B concentration as well as B isotope ratio in the same run for biological tracer studies. Therefore, ICP–MS is the method of choice among the present-day technologies for determining B concentration and a convenient method for B isotope determination. In recent years, new generations of plasma-source MS instruments have been developed using alternative plasma generation methods and high-resolution mass spectrometers. These instruments are expected to bring further improvements in accuracy, sensitivity and precision of B determination.     

Incorporation of Selenomethionine into Induced Intracytoplasmic Membrane Proteins of Rhodobacter species

Efficient multiple- or single-wavelength anomalous dispersion (MAD/SAD) techniques that use tunable X-ray sources at third-generation synchrotrons exploit the anomalous scattering of certain heavy atoms for determination of experimental phases. Development of methods for the in vivo substitution of methionine by selenomethionine (SeMet) has revolutionized the process for determination of structures of soluble proteins in recent years. Herein, we report methods for biosynthetic incorporation of SeMet into induced intracytoplasmic membrane proteins of two species of the Rhodobacter genus of purple non-sulfur photosynthetic bacteria. Amino acid analysis of a membrane protein complex that was purified to homogeneity determined that the extent of SeMet incorporation was extensive and approached quantitative replacement. Diffraction-quality crystals were obtained from SeMet-labeled membrane proteins purified from 2 l of culture. These methods augment the potential utility of photosynthetic bacteria and their inducible membrane systems for the production of foreign membrane proteins for structure determination.     

Neutron imaging versus standard X-ray densitometry as method to measure tree-ring wood density

Neutron imaging is a new non-destructive testing method in wood science. It is similar to X-ray methods but with differing sensitivities for different elements. In this study, neutron imaging was used to ascertain the density profiles of thin spruce samples and compared with results generated with standard X-ray microdensitometry. Data obtained through neutron imaging were similar to those resulting from the X-ray method. The advantage of neutron imaging is its higher sensitivity to some elements such as hydrogen. Together with the high neutron-sensitivity of the applied detectors (imaging plates) this makes shorter exposure times possible, and yields more detailed information on the inner composition of wood. X-ray film, which is still most commonly used in X-ray densitometry, has the disadvantage that the relationship between the optical density of the film and the density of wood is non-linear. This means that corrections and calibration with step wedges are necessary, whereas with neutron imaging the digital values can be used directly to calculate the density at a certain point of the specimen. Thus neutron imaging appears to be an appropriate method, which can be used as complement to established X-ray methods for fast and straightforward investigations of tree rings, growth zones and wood density.     

Variability in habitat, diet, and social structure of Hapalemur griseus in Ranomafana National Park, Madagascar

This study investigated the effects of habitat on the diet, population density, and social structure of a small-bodied folivore, Hapalemur griseus. Three groups of H. griseus were followed at two study sites (Tala and Vato) within Ranomafana National Park in southeastern Madagascar. These two sites differed in degree of habitat disturbance, forest composition, and forest structure, as determined by botanical plots (50 x 10 m) which were monitored twice monthly in the home ranges of three study groups (group T, n = 4; group V1, n = 4; group V2, n = 2). Tala has experienced more habitat disturbance compared to Vato, and this appeared to influence population density and group size. The H. griseus that inhabit Tala occur at much higher densities and in larger social groups than the H. griseus at Vato. These results may be attributable to: 1) a greater number of potential food sources, 2) a more dense resource base, and/or 3) higher-quality resources at Tala for this folivore. In general, dietary diversity for all groups was low, and groups exploited similar plant species. However, within this small range of food sources, each study group specialized in food sources found in the highest abundance within their home range. This resulted in dietary differences between groups within sites, as well as differences between sites. Introduced tree species such as Chinese guava (Psidium cattleyanum) may have greatly impacted the diet and social structure of those groups at Tala, whose home ranges included this food source. In contrast, Vato group 1 ingested more new and mature leaves of Ficus spp., and Vato group 2 primarily ate spider bamboo (Nastus elongatus). In conclusion, it seems that microhabitat differences, which may be related to habitat disturbance and/or other factors such as topography, influenced the food species ingested by H. griseus. Overall habitat quality, which is likely also affected by habitat disturbance, influenced general diet, population density, and group size.     

Comparison of hydrogen determination with X-ray and neutron crystallography in a human aldose reductase–inhibitor complex

Protonation states determination by neutron (2.2 A at room temperature) and X-ray (0.66 A at 100 K) crystallographic studies were compared for a medium size enzyme, human aldose reductase (MW=36 kDa), complexed with its NADP+ coenzyme and a selected inhibitor of therapeutic interest. The neutron resolution could be achieved only with the ab initio fully deuterated protein and the subsequent crystallization in D2O of the complex. We used the largest good-quality crystal (1.00x0.67x0.23 mm, i.e. volume of 0.15 mm3) that we were able to grow so far. Both studies enable the determination of protonation states, with a clear advantage for neutrons in the case of less-ordered atoms (B>5 A2). Hydrogen atoms are best determined by a complementary analysis of the Fourier maps obtained from both methods.     

Version 1.2 of the Crystallography and NMR system

Version 1.2 of the software system, termed Crystallography and NMR system (CNS), for crystallographic and NMR structure determination has been released. Since its first release, the goals of CNS have been (i) to create a flexible computational framework for exploration of new approaches to structure determination, (ii) to provide tools for structure solution of difficult or large structures, (iii) to develop models for analyzing structural and dynamical properties of macromolecules and (iv) to integrate all sources of information into all stages of the structure determination process. Version 1.2 includes an improved model for the treatment of disordered solvent for crystallographic refinement that employs a combined grid search and least-squares optimization of the bulk solvent model parameters. The method is more robust than previous implementations, especially at lower resolution, generally resulting in lower R values. Other advances include the ability to apply thermal factor sharpening to electron density maps. Consistent with the modular design of CNS, these additions and changes were implemented in the high-level computing language of CNS.     

Genome-scale expression of proteins from Bacillus subtilis

We have applied high throughput methods for cloning and expression of more than 850 genes from the Bacillus subtilis genome. The process uses 96-well plates and is automated from the level of primer design to the detection of soluble protein by a tag detection screen. This process was applied to a set of cytoplasmic targets from Bacillus subtilis to produce clones expressing soluble protein for incorporation into the structure determination pipeline of the Midwest Center for Structural Genomics. We also evaluated the feasibility of these plate-based methods for domain-based cloning and expression of secretory proteins and putative soluble domains of membrane proteins. This approach shows promise for implementation in a high throughput format and could provide additional target resources for structure determination. The continued development of new technologies that can be implemented in an automated format will be essential for continued success in the structural genomic programs.