The importance of the surface charge on support media for microbial adhesion

Using cristobalites treated at various temperatures, methane fermentation tests were carried out in an anaerobic fluidized-bed reactor (AFBR). Cristobalites treated below 1,000°C had almost the same qualities in terms of components, physical properties, and surface structures. However, points of zero charge were different between cristobalites treated below 600°C and those treated above 800°C. Points of zero charge on the former numbered about 5 and their surfaces were positively charged in the fermentor controlled pH at 7, while points of zero charge of the latter numbered above 8 and surfaces were negatively charged. In the methane fermentation tests, a TOC removal efficiency of 78% was obtained using positively charged cristobalite at a TOC loading rate of 8 g/l-h, but with negatively charged cristobalite, the efficiency was only 63% under the same conditions. This result confirms the importance of the surface charge on the support medium for the anaerobic digestion in an AFBR.     

Isolation and characterization of Veillonella sp. from methanogenic granular sludge

An anaerobic, propionate-producing, mesophilic, Gram-negative, non-spore forming, non-motile, coccoid-shaped bacterium (strain S119) was isolated from methanogenic granular sludge of an upflow anaerobic sludge blanket reactor. Based on morphology and cytological and physiological properties the isolate was assigned to the genus Veillonella. Strain S119 forms spherical monospecies biofilms (granules), 1.0–3.0 mm in diameter, when grown in continuously mixed medium with sodium lactate as the sole carbon source and powdered activated carbon as biofilm support particles. The granules attained concentrations of volatile suspended solids up to 38 mg/cm³. Veillonella sp. strain S119 has a highly hydrophobic cell surface and produces extracellular slime, which contains polysaccharide fractions. Growth characteristics and adhesion properties of the isolated microorganisms suggest its participation in the formation of granular sludge. Correspondence to: W. Verstraete     

Real evidence about zeolite as microorganisms immobilizer in anaerobic fluidized bed reactors

Using the scanning electronic microscopy, it was observed that natural zeolite possesses excellent physical characteristics as a support medium in anaerobic fluidized bed reactors (AFBR). Samples for biomass analysis were taken from two identical laboratory-scale AFBR (R-1 and R-2), which were operated with 25% of fluidization. These reactors treated distillery wastewaters (vinasses) at mesophilic temperature (30 ± 2 °C). The experiments were carried out with 0.25–0.50 and 0.50–0.80 mm zeolite particle diameter in reactors R-1 and R-2, respectively. The biomass concentration attached to zeolite in both reactors was found to be in the range of 40–45 g volatile solids/l. COD removal efficiencies as high as 90% were achieved at organic loading rate (OLRs) of up to 20 g COD/l day. The volatile fatty acid (VFA) levels were always lower that the suggested limits for digester failure. The yield coefficient of methane production was 0.29 l CH₄(at STP)/g COD consumed and was virtually independent of the OLR applied. A hybridization technique (fluorescence in situ hybridization, FISH) helped determine the predominant anaerobic microorganisms that colonized the natural zeolite, which were found to be Methanosaeta and Methanosarcinaceae, observing a reduced number of sulphate reducing bacteria. The results obtained for reactors R-1 and R-2 were very similar, showing that the particle size did not significantly influence the microbial community immobilized on zeolite.     

Linking Belowground Carbon Allocation to Anaerobic CH4 and CO2 Production in a Forested Peatland,New York State

Heterotrophic soil microorganisms rely on carbon (C) allocated belowground in plant production, but belowground C allocation (BCA) by plants is a poorly quantified part of ecosystem C cycling, especially, in peat soil. We applied a C balance approach to quantify BCA in a mixed conifer-red maple (Acer rubrum) forest on deep peat soil. Direct measurements of CH₄ and CO₂ fluxes across the soil surface (soil respiration), production of fine and small plant roots, and aboveground litterfall were used to estimate respiration by roots, by mycorrhizae and by free-living soil microorganisms. Measurements occurred in two consecutive years. Soil respiration rates averaged 1.2 bm μmol m^{? 2} s^{? 1} for CO₂ and 0.58 nmol m^{? 2} s^{? 1} for CH₄ (371 to 403 g C m^{? 2} year^{? 1}). Carbon in aboveground litter (144 g C m^{? 2} year^{? 1}) was 84% greater than C in root production (78 g C m^{? 2} year^{? 1}). Complementary in vitro assays located high rates of anaerobic microbial activity, including methanogenesis, in a dense layer of roots overlying the peat soil and in large-sized fragments within the peat matrix. Large-sized fragments were decomposing roots and aboveground leaf and twig litter, indicating that relatively fresh plant production supported most of the anaerobic microbial activity. Respiration by free-living soil microorganisms in deep peat accounted for, at most, 29 to 38 g C m^{? 2} year^{? 1}. These data emphasize the close coupling between plant production, ecosystem-level C cycling and soil microbial ecology, which BCA can help reveal.     

Investigation of Microorganisms in Bentonite Deposits

Microbiological characteristics of bentonite deposits were investigated as a natural analogue of microbial behavior in the buffer material for geological disposal of radioactive waste. Distributions of microorganisms in bentonite were examined at four sites in two different bentonite deposits in Japan. The sites included pond bottom, wetland, and wet mine gallery environments where bentonite layers have been left undisturbed for 2 to 30 years. Excavation was performed without using drilling water and the center parts of the cores were used for microbial examination. Plate counts with R2A medium of aerobic and anaerobic bacteria at the drilling mouth ranged from 10⁵ to 10⁷/g DW (dry weight) and from 10³ to 10⁶/g DW, respectively. The CFDA-AM (Carboxyfluorescein diacetate acetoxymethyl ester) cell counts ranged from 10⁶ to 10⁹/g DW. Bacterial numbers in the bentonite layers declined with distance from the drilling mouth; both aerobes and anaerobes were less than 10²/g DW and CFDA-AM cell counts less than 10⁶/g DW for core samples taken from approximately 1 m depth, except at the pond bottom. These results suggest that microbial activity in natural bentonite is lower than in typical soils and aquatic sediments and does not spread easily.     

湿地土壤微生物功能多样性及碳氮组分对长期氮输入的响应

氮输入对湿地生态系统碳氮循环具有重要影响,研究湿地土壤微生物功能多样性及碳氮组分对氮输入的响应,对于明确湿地土壤碳氮循环微生物驱动机制具有重要意义。依托长期野外氮输入模拟试验,利用Biolog-ECO微平板技术,分析不同浓度氮输入:N1(6 g N m^-2 a^-1)、N2(12 g N m^-2 a^-1)和N3(24 g N m^-2 a^-1)对湿地土壤表层(0-15 cm)和亚表层(15-30 cm)微生物碳源代谢活性、功能多样性和碳氮组分的影响。结果表明:N2处理显著提高了亚表层土壤微生物碳源代谢活性和McIntosh指数,N3处理显著降低了表层土壤微生物Shannon指数和Shannon-evenness指数。随氮输入浓度增加湿地表层土壤微生物对糖类的利用率显著降低,N3处理表层土壤微生物对胺类的利用率以及亚表层土壤微生物对醇类的利用率显著提高。N1处理显著提高了湿地表层土壤全氮和微生物量碳含量;N2、N3处理显著提高了土壤铵态氮、硝态氮含量;N3处理显著降低了土壤pH值。湿地土壤pH、总碳、溶解性有机碳含量是影响微生物碳源代谢活性和功能多样性的重要因素,土壤溶解性有机碳、铵态氮、全氮含量、含水率是影响微生物碳源利用变化的主要因子。     

Anaerobic digestion of swine manure under natural zeolite addition: VFA evolution, cation variation, and related microbial diversity

Batch experiments were carried out on anaerobic digestion of swine manure under 10 % of total solids and 60 g/L of zeolite addition at 35 °C. Four distinctive volatile fatty acid (VFAs) evolution stages were observed during the anaerobic process, i.e., VFA accumulation, acetic acid (HAc) and butyric acid (HBu) utilization, propionic acid (HPr) and valeric acid (HVa) degradation, and VFA depletion. Large decreases in HAc/HBu and HPr/HVa occurred respectively at the first and second biogas peaks. Biogas yield increased by 20 % after zeolite addition, about 356 mL/g VS_added with accelerated soluble chemical oxygen demand degradation and VFA (especially HPr and HBu) consumption in addition to a shortened lag phase between the two biogas peaks. Compared with Ca²⁺ and Mg²⁺ (100–300 mg/L) released from zeolite, simultaneous K⁺ and NH₄ ⁺ (580–600 mg/L) adsorptions onto zeolite particles contributed more to the enhanced biogasification, resulting in alleviated inhibition effects of ammonium on acidogenesis and methanogenesis, respectively. All the identified anaerobes could be grouped into Bacteroidetes and Firmicutes, and zeolite addition had no significant influence on the microbial biodiversity in this study.     

Performance evaluation and phylogenetic characterization of anaerobic fluidized bed reactors using ground tire and pet as support materials for biohydrogen production

This study evaluated two different support materials (ground tire and polyethylene terephthalate [PET]) for biohydrogen production in an anaerobic fluidized bed reactor (AFBR) treating synthetic wastewater containing glucose (4000 mg L⁻¹). The AFBR, which contained either ground tire (R1) or PET (R2) as support materials, were inoculated with thermally pretreated anaerobic sludge and operated at a temperature of 30 °C. The AFBR were operated with a range of hydraulic retention times (HRT) between 1 and 8 h. The reactor R1 operating with a HRT of 2 h showed better performance than reactor R2, reaching a maximum hydrogen yield of 2.25 mol H₂ mol⁻¹ glucose with 1.3 mg of biomass (as the total volatile solids) attached to each gram of ground tire. Subsequent 16S rRNA gene sequencing and phylogenetic analysis of particle samples revealed that reactor R1 favored the presence of hydrogen-producing bacteria such as Clostridium, Bacillus, and Enterobacter.     

Estimation of dominant microbial population sizes in the anaerobic granular sludge of a full-scale UASB treating streptomycin wastewater by PCR-DGGE

Although the dominant members of microbial communities in wastewater bio-treatment systems were often paid attention due to their possible important roles in treatment performance, their population sizes, especially the unculturable species, were still little known. Then PCR-DGGE was used in an attempt to estimate the dominant microbial population sizes in the anaerobic granular sludge treating streptomycin wastewater, coupled with an inoculated strain (Esherichia coli) with known population sizes as an internal standard. The results indicated that the band intensities of the inoculated strain in DGGE profiles showed good correlation with population sizes. Then it was possible to estimate the dominant microbial population sizes by means of comparing their DGGE band intensities with the inoculated strain. The estimated results demonstrated that the sizes of major dominant microbial populations in the sludge sample were at the level of 10⁷–10⁸ CFU/g. The sizes of secondary dominant microbial populations were at the level of 10⁵–10⁶ CFU/g. The microbial populations with the size level lower than 10³ CFU/g were undetectable by PCR-DGGE. These results provided a potential approach to evaluate dominant microbial population sizes in complex microbial communities.     

木质纤维素燃料乙醇蒸馏废水的高温厌氧处理及菌群结构分析

【目的】为开发高效的高浓度木质纤维素燃料乙醇蒸馏废水厌氧处理及资源化利用工艺,以活性炭为载体,在实验室规模上对高温厌氧流化床反应器处理木质纤维素燃料乙醇蒸馏废水进行研究。【方法】反应器经65 d梯度驯化后启动,对工艺参数进行一系列优化,并通过基于16S rRNA基因的分子生态学技术分析厌氧污泥中的优势菌群。【结果】实验获得了最优的反应条件和处理效果:厌氧流化床反应器(Anaerobic fluidized bed reactor,AFBR)在温度55±1°C、有机负荷率(OLR)13.8 g COD/(L·d)及水力停留时间(HRT)48 h操作时,COD去除率达到90%以上,同时甲烷产率达到290 mL/g COD;菌群鉴定分析结果显示高温厌氧活性污泥中Clostridia所占比例最大,产甲烷菌属以Methanoculleus和Methanosarcina为主,其它功能菌群主要为Alphaproteobacteria等。【结论】AFBR反应器可高效降解木质纤维素燃料乙醇蒸馏废水并产生生物能源甲烷,其反应体系内微生物种类丰富。     

Medium factors on anaerobic production of rhamnolipids by <Emphasis Type="Italic">Pseudomonas aeruginosa</Emphasis> SG and a simplifying medium for in situ microbial enhanced oil recovery applications

Aerobic production of rhamnolipid by Pseudomonas aeruginosa was extensively studied. But effect of medium composition on anaerobic production of rhamnolipid by P. aeruginosa was unknown. A simplifying medium facilitating anaerobic production of rhamnolipid is urgently needed for in situ microbial enhanced oil recovery (MEOR). Medium factors affecting anaerobic production of rhamnolipid were investigated using P. aeruginosa SG (Genbank accession number KJ995745). Medium composition for anaerobic production of rhamnolipid by P. aeruginosa is different from that for aerobic production of rhamnolipid. Both hydrophobic substrate and organic nitrogen inhibited rhamnolipid production under anaerobic conditions. Glycerol and nitrate were the best carbon and nitrogen source. The commonly used N limitation under aerobic conditions was not conducive to rhamnolipid production under anaerobic conditions because the initial cell growth demanded enough nitrate for anaerobic respiration. But rhamnolipid was also fast accumulated under nitrogen starvation conditions. Sufficient phosphate was needed for anaerobic production of rhamnolipid. SO₄ ^2? and Mg²⁺ are required for anaerobic production of rhamnolipid. Results will contribute to isolation bacteria strains which can anaerobically produce rhamnolipid and medium optimization for anaerobic production of rhamnolipid. Based on medium optimization by response surface methodology and ions composition of reservoir formation water, a simplifying medium containing 70.3 g/l glycerol, 5.25 g/l NaNO₃, 5.49 g/l KH₂PO₄, 6.9 g/l K₂HPO₄·3H₂O and 0.40 g/l MgSO₄ was designed. Using the simplifying medium, 630 mg/l of rhamnolipid was produced by SG, and the anaerobic culture emulsified crude oil to EI₂₄ = 82.5 %. The simplifying medium was promising for in situ MEOR applications.     

Rapid start-up and performance of denitrifying granular sludge in an upflow sludge blanket (USB) reactor treating high concentration nitrite wastewater

Denitrifying granular sludge reactor holds better nitrogen removal efficiency than other kinds of denitrifying reactors, while this reactor commonly needs seeding anaerobic granular sludge and longer period for start-up in practice, which restricted the application of denitrifying granular sludge reactor. This study presented a rapid and stable start-up method for denitrifying granular sludge. An upflow sludge blanket (USB) reactor with packings was established with flocculent activated sludge for treatment of high concentration nitrite wastewater. Results showed mature denitrifying granular sludge appeared only after 15 days with highest nitrogen removal rate of 5.844 kg N/(m³ day), which was much higher than that of compared anoxic sequencing batch reactor (ASBR). No significant nitrite inhibition occurred in USB and denitrification performance was mainly influenced by hydraulic retention time, influent C/N ratio and internal reflux ratio. Hydraulic shear force created by upflow fluid, shearing of gaseous products and stable microorganisms adhesion on the packings might be the reasons for rapid achievement of granular sludge. Compared to inoculated sludge and ASBR, remarkable microbial communitiy variations were detected in USB. The dominance of Proteobacteria and Bacteroidetes and enrichment of species Pseudomonas_stutzeri should be responsible for the excellent denitrification performance, which further verified the feasibility of start-up method.     

Adhesion of Biodegradative Anaerobic Bacteria to Solid Surfaces

In order to exploit the ability of anaerobic bacteria to degrade certain contaminants for bioremediation of polluted subsurface environments, we need to understand the mechanisms by which such bacteria partition between aqueous and solid phases, as well as the environmental conditions that influence partitioning. We studied four strictly anaerobic bacteria, Desulfomonile tiedjei, Syntrophomonas wolfei, Syntrophobacter wolinii, and Desulfovibrio sp. strain G11, which theoretically together can constitute a tetrachloroethylene- and trichloroethylene-dechlorinating consortium. Adhesion of these organisms was evaluated by microscopic determination of the numbers of cells that attached to glass coverslips exposed to cell suspensions under anaerobic conditions. We studied the effects of the growth phase of the organisms on adhesion, as well as the influence of electrostatic and hydrophobic properties of the substratum. Results indicate that S. wolfei adheres in considerably higher numbers to glass surfaces than the other three organisms. Starvation greatly decreases adhesion of S. wolfei and Desulfovibrio sp. strain G11 but seems to have less of an effect on the adhesion of the other bacteria. The presence of Fe³⁺ on the substratum, which would be electropositive, significantly increased the adhesion of S. wolfei, whereas the presence of silicon hydrophobic groups decreased the numbers of attached cells of all species. Measurements of transport of cells through hydrophobic-interaction and electrostatic-interaction columns indicated that all four species had negatively charged cell surfaces and that D. tiedjei and Desulfovibrio sp. strain G11 possessed some hydrophobic cell surface properties. These findings are an early step toward understanding the dynamic attachment of anaerobic bacteria in anoxic environments.     

Anaerobic Growth of Microorganisms with Chlorate as an Electron Acceptor

The ability of microorganisms to use chlorate (ClO₃^-) as an electron acceptor for respiration under anaerobic conditions was studied in batch and continuous tests. Complex microbial communities were cultivated anaerobically in defined media containing chlorate, all essential minerals, and acetate as the sole energy and carbon source. It was shown that chlorate was reduced to chloride, while acetate was oxidized to carbon dioxide and water and used as the carbon source for synthesis of new biomass. A biomass yield of 1.9 to 3.8 g of volatile suspended solids per equivalent of available electrons was obtained, showing that anaerobic growth with chlorate as an electron acceptor gives a high energy yield. This indicates that microbial reduction of chlorate to chloride in anaerobic systems is coupled with electron transport phosphorylation.     

Anammox bacteria enrichment in upflow anaerobic sludge blanket (UASB) reactor

We investigated the anaerobic ammonium oxidation (anammox) reaction in a labscale upflow anaerobic sludge blanket (UASB) reactor. Our aim was to detect and enrich the organisms responsible for the anammox reaction using a synthetic medium that contained low concentrations of substrates (ammonium and nitrite). The reactor was inoculated with granular sludge collected from a full-scale anaerobic digestor used for treating brewery wastewater. The experiment was performed during 260 days under conditions of constant ammonium concentration (50 mg NH₄/⁺-N/L) and different nitrite concentrations (50∼150 mg NO₂-N/L). After 200 days, anammox activity was observed in the system. The microorganisms involved in this anammox reaction were identified as CandidatusB. Anammoxidans andK. Stuttgartiensis using fluorescencein situ hybridization (FISH) method.     

Effect of Cetylpyridinium Chloride on Microbial Adhesion to Hexadecane and Polystyrene

Microbial adhesion at the oil-water interface is a subject of both basic interest (e.g., as a technique for the measurement of hydrophobicity) and applied interest (e.g., for use in two-phase oil-water mouthwashes for the desorption of oral microorganisms). In general, surfactants inhibit microbial adhesion to oils and other hydrophobic surfaces. In the present study, we demonstrated that the cationic surfactant cetylpyridinium chloride (CPC) significantly enhanced microbial adhesion to hexadecane and various oils, as well as to the solid hydrophobic surface polystyrene. CPC increased adhesion to hexadecane of Escherichia coli, Candida albicans and Acinetobacter calcoaceticus MR-481 and of expectorated oral bacteria from near 0% to over 90%. The CPC concentration required for optimal enhancement of adhesion was a function of the initial cell density. This phenomenon was inhibited by high salt concentrations and, in the case of E. coli, by a low pH. CPC-pretreated cells were able to bind to hexadecane, but CPC-pretreated hexadecane was unable to bind untreated cells. Another cationic, surface-active antimicrobial agent, chlorhexidine gluconate, was similarly able to promote microbial adhesion to hexadecane. The results suggest that (i) CPC enhances microbial adhesion to hexadecane by binding via electrostatic interactions at the cell surface, thus diminishing surface charge and increasing cell surface hydrophobicity, and (ii) this phenomenon may have applications in oral formulations and in the use of hydrocarbon droplets as a support for cell immobilization.     

南海Formosa冷泉区沉积物微生物多样性与分布规律研究

【目的】当前对全球冷泉生态系统微生物生态学研究显示，冷泉生态系统中主要微生物类群为参与甲烷代谢的微生物，它们的分布差异与所处冷泉区生物地球化学环境密切相关。但在冷泉区内也存在环境因子截然不同的生境，尚缺乏比较冷泉区内小尺度生境间微生物多样性和分布规律的研究。本研究旨在分析南海Formosa冷泉区内不同生境间微生物多样性差异，完善和理解不同环境因子对冷泉内微生物群落结构的影响。【方法】对采集自南海Formosa冷泉区不同生境(黑色菌席区、白色菌席区和碳酸盐岩区)沉积物样本中古菌和细菌16S rRNA基因进行测序，结合环境因子，比较微生物多样性差异，分析环境因子对微生物分布的影响。【结果】发现在Formosa冷泉内的不同生境中，甲烷厌氧氧化古菌(anaerobic methanotrophic archaea,ANME)是主要古菌类群，占古菌总体相对丰度超过70%；在菌席区ANME-1b和ANME-2a/b是主要ANME亚群，碳酸盐岩区则是ANME-1b。硫酸盐还原菌(sulfate-reducing bacteria,SRB)和硫氧化菌(sulfur-oxidizing bacteria...     

Treatment of phenol in an anaerobic fluidized bed reactor (AFBR): continuous and batch regime

Results of this study describe the feasibility of anaerobic treatment of highly concentrated phenol synthetic wastewater using an anaerobic fluidized bed reactor (AFBR) in both continuous and batch modes. Wastewater with a maximum load of 2,100 mg C·l⁻¹ was prepared using phenol (maximum concentration of 1,600 mg C·l⁻¹) as substrate and a mixture of acetic, propionic and butyric acids (500 mg C·l⁻¹) as co-substrate. AFBR reached total organic carbon (TOC) and phenol removal efficiency over 95% treating the highest organic loading rate (OLR) containing phenol studied for this kind of reactor (5.03 g C·l⁻¹·d⁻¹). The phenol loading rate rise caused volumetric biogas rate increase up to 4.4 l·l⁻¹·d⁻¹ (average yield of 0.28 l CH₄·g⁻¹ COD_removed) as well as variation in the biogas composition; the CO₂ percentage increased while the CH₄ percentage decreased. Morphological examination of the bioparticles at 4.10 g C·l⁻¹·d⁻¹, revealed significant differences in the biofilm structure, microbial colonization and bacterial morphological type development. The five batch assays showed that phenol degradation may be favoured by the presence of volatile fatty acids (VFAs) (co-metabolism), whereas VFAs degradation may be inhibited by phenol. AFBR reached initial phenol degradation velocity of 0.25 mg C·l⁻¹·min⁻¹.     

Adhesion of the positively charged bacterium Stenotrophomonas (Xanthomonas) maltophilia 70401 to glass and Teflon.

Medical implants are often colonized by bacteria which may cause severe infections. The initial step in the colonization, the adhesion of bacteria to the artificial solid surface, is governed mainly by long-range van der Waals and electrostatic interactions between the solid surface and the bacterial cell. While van der Waals forces are generally attractive, the usually negative charge of bacteria and solid surfaces leads to electrostatic repulsion. We report here on the adhesion of a clinical isolate, Stenotrophomonas maltophilia 70401, which is, at physiological pH, positively charged. S. maltophilia has an electrophoretic mobility of +0.3 x 10(-8) m2 V-1 s-1 at pH 7 and an overall surface isoelectric point at pH 11. The positive charge probably originates from proteins located in the outer membrane. For this bacterium, both long-range forces involved in adhesion are attractive. Consequently, adhesion of S. maltophilia to negatively charged surfaces such as glass and Teflon is much favored compared with the negatively charged bacterium Pseudomonas putida mt2. While adhesion of negatively charged bacteria is impeded in media of low ionic strength because of a thick negatively charged diffuse layer, adhesion of S. maltophilia was particularly favored in dilute medium. The adhesion efficiencies of S. maltophilia at various ionic strengths could be explained in terms of calculated long-range interaction energies between S. maltophilia and glass or Teflon.     

Nitrogen removal and microbial communities in a three-stage system simulating a riparian environment

The riparian zone is an active interface for nitrogen removal, in which nitrogen transformations by microorganisms have not been valued. In this study, a three-stage system was constructed to simulate the riparian zone environments, and nitrogen removal as well as the microbial community was investigated in this ‘engineered riparian system’. The results demonstrated that stage 1 of this system accounted for 41–51 % of total nitrogen removal. Initial ammonium loading and redox potential significantly impacted the nitrogen removal performances. Stages 1 and 2 were both composed of an anoxic/oxic (A/O) zone and an anaerobic column. The A/O zone removed most of the ammonium load (6.8 g/m²/day), while the anaerobic column showed a significant nitrate removal rate (11.1 g/m²/day). Molecular biological analysis demonstrated that bacterial diversity was high in the A/O zones, where ammonium-oxidizing bacteria and nitrite-oxidizing bacteria accounted for 8.42 and 3.32 % of the bacterial population, respectively. The denitrifying bacteria Acidovorax sp. and the nitrifying bacteria Nitrosospira/Nitrosomonas were the predominant microorganisms in this engineered riparian system. This three-stage system was established to achieve favorable nitrogen removal and the microbial community in the system was also retained. This investigation should deepen our understanding of biological nitrogen removal in engineered riparian zones.