不同树种木材对截头堆砂白蚁初建群体的影响

收集了62种从东南亚进口的不同树种的木材,并作为截头堆砂白蚁Cryptotermesdomestictis(Haviland)的食料,让其原始繁殖蚁自行配对钻入这些木料中取食,建立新群体.观察该种白蚁对不同树种木材的取食状况,了解不同树种木材对该种白蚁初建群体的影响.结果表明,该种白蚁食性广泛,能取食多种在分类上差异很大的木材,除坤甸外,均被其取食.试验用的全部木材对该种白蚁原始繁殖蚁配对没有影响,均有原始繁殖蚁配对钻入洞内.在配对3个月后解剖群体发现,除坤甸、樟木、硬榄仁、柚木、子京、虫眼木、暗罗、硬椴、轻胭脂、胭脂、番龙眼外,其余树种的初建群体,雌雄繁殖蚁存活,子代发育正常.     

截头堆砂白蚁研究概况

截头堆砂白蚁Cryptotermes domestictis是世界性蛀木害虫, 也是我国主要危害木材的白蚁之一。本文重点综述了我国截头堆砂白蚁补充型繁殖蚁的形成、生存、繁殖和扩散, 以及成熟群体的分飞, 原始繁殖蚁的形成周期和行为特点, 初建群体的形成、发展发育和取食行为的生物学和生态学研究进展。并且对该种白蚁的控制进行了探讨, 为控制该种白蚁的扩散、传播和为害提供理论依据。     

Sex ratios of the dryword termite Cryptotermes domesticus

为了解截头堆砂白蚁Cryptotermes domesticus(Haviland)群体中不同品级、不同虫态的雌雄性比,本文研究了该种白蚁自行配对室温条件下饲养4年巢龄的实验群体与采集的自然群体的各个品级和不同虫态的雌雄性比.结果表明:自行配对室温饲养4年巢龄群体与自然环境群体中原始繁殖蚁、幼蚁、若蚁、兵蚁都有雌雄之分,其中自行配对室温饲养群体的原始繁殖蚁雌雄比例为1:1,兵蚁雌雄比例为1:1.24,幼蚁和若蚁雌雄比例为1:1.46;自然环境群体原始繁殖蚁雌雄比例为1:1,兵蚁雌雄比例为1:1.15,幼蚁和若蚁雌雄比例为1:1.43.     

截头堆砂白蚁新群体的形成及发展

本文主要论述在广州室温及恒温27℃、相对湿度80%条件下,截头堆砂白蚁Cryptotermes domesticus(Haviland)新群体的形成、繁殖特性及其群体的发展、发育状况.(1)在广州6～7月室温下,截头堆砂白蚁原始繁殖蚁自行配对后,产卵前期7～16天,平均10.33±2.32天,卵期46～71天,平均55.13±6.42天,巢龄为1年、2年的新建群体,子代个体分别为3～8头、10～16头;3年巢龄群体,子代个体12～35头;4年巢龄群体,兵蚁开始出现,子代个体23～57头,其中兵蚁1～3头.该种白蚁新建群体经历7年才发育成熟,此时群体子代个体36～115头,其中兵蚁1～4头.(2)在恒温27℃、相对湿度80%条件下,截头堆砂白蚁原始繁殖蚁配对后产卵前期8～18天,平均11.6±2.66天,卵期50～73天,平均57.8±5.79天.1年巢龄群体,子代个体6～10头;2年巢龄群体,兵蚁出现,子代个体16～34头,其中兵蚁1～2头.新建群体经历2～3年发育成熟,此时群体内的子代个体18～44头,其中兵蚁1～2头.     

截头堆砂白蚁性比的研究

为了解截头堆砂白蚁Cryptotermes domesticus（Haviland）群体中不同品级、不同虫态的雌雄性比,本文研究了该种白蚁自行配对室温条件下饲养4年巢龄的实验群体与采集的自然群体的各个品级和不同虫态的雌雄性比。结果表明：自行配对室温饲养4年巢龄群体与自然环境群体中原始繁殖蚁、幼蚁、若蚁、兵蚁都有雌雄之分,其中自行配对室温饲养群体的原始繁殖蚁雌雄比例为1：1,兵蚁雌雄比例为1：1．24,幼蚁和若蚁雌雄比例为1：1．46;自然环境群体原始繁殖蚁雌雄比例为1：1,兵蚁雌雄比例为1：1．15,幼蚁和若蚁雌雄比例为1：1．43。     

截头堆砂白蚁原始繁殖蚁形成的周期

采用马尾松(Pinusmassonianalamb)、东北松(PinusSpp.)、北美黄杉(花旗松)(Pseudotsugamenziesii)、青岗(CyclobalanopsisSpp.)、荷木(SchimaSpp.)作为截头堆砂白蚁Cryptotermesdomesticus(Haviland)的食料,研究其原始繁殖蚁配对后新建群体的形成和发展,从饲养的新建群体中培养产生了下一代的原始繁殖蚁,完成了1个世代的生活周期观察。试验证实,截头堆砂白蚁在广州市室温下,产生下一代原始繁殖蚁(完成1个生活周期)为7年;在湛江市室温下6、7年;而在恒温27℃,相对湿度80%的条件下只需2～3年。     

截头堆砂白蚁在恒温恒湿条件的分飞活动

截头堆砂白蚁Cryptotermes domesticus(Haviland)是世界性的重要蛀木害虫,原始繁殖蚁分飞是该种白蚁的重要扩散传播途径之一。为了解截头堆砂白蚁的分飞活动规律,本文研究了其成熟群体在恒温恒湿条件下的分飞期。结果表明,在恒温27℃和相对湿度80%的条件下,经历持续10年零3个月的观察,有7年内全年每个月均有原始繁殖蚁分飞,只有3年内每年均缺少2个月无原始繁殖蚁分飞。试验结果揭示了截头堆砂白蚁成熟群体在形成有分飞能力原始繁殖蚁的基础上,只要温、湿度条件适宜,全年中不分季节和日期,都有可能进行分飞活动。     

圆唇散白蚁补充生殖蚁的类型与建群能力

摘要: 【目的】为了探讨圆唇散白蚁Reticulitermes labralis补充生殖蚁对巢群稳定和发展的作用。【方法】对野外巢群进行调查研究, 及对婚飞成虫通过雌雄配对与补充生殖蚁隔离巢群进行人工饲养的对比研究。【结果】在野外巢群只发现1对原始蚁王蚁后, 而补充生殖蚁的数量最多可达到689头/巢。圆唇散白蚁有3种类型的补充生殖蚁, 即由工蚁转化来的无翅型补充生殖蚁、若蚁转化来的翅芽型补充生殖蚁和末龄若蚁羽化来的拟成虫型补充生殖蚁。实验室条件下婚飞配对群体和隔离群体建群1个月后的存活率分别为64%和96%。建巢初期婚飞配对群体的子代数目增长缓慢, 2个月时的群体数量为6.3±1.54, 10个月时的群体数量也仅为8.4±1.47; 而隔离建群补充生殖蚁2个月时的群体数量为52.4±6.44, 10个月时的群体数量为164.3±20.85, 都高于婚飞配对群体。 此外, 野外巢群的补充蚁后跟原始蚁后一样都具有发达的卵巢。【结论】在圆唇散白蚁中补充生殖蚁是白蚁巢群主要的繁殖力量, 也是建立新巢群的重要繁殖品级。     

黑胸散白蚁新群体的建立及发展规律

经十年的室内配对饲养观察,黑胸散白蚁 Reticulitermes chinensisSnyder初期群体配对后5—10天开始产卵,胚胎发育期36—46天,幼蚁经历两个龄期,各龄8—13天,工蚁是幼蚁经两次蜕皮后分化出来,具有上颚自如活动,头宽0.71mm以上;前兵蚁蜕一次皮发育为兵蚁需经历10—13天,触角14—15节,头宽0.81—0.82mm,大于2龄工蚁,初期巢群最早3个半月左右产生兵蚁.当年配对的产卵期3至4个半月,产卵量16—45粒.饲养7—8年后的群体开始出现若蚁(长翅成虫的幼期).9、10年群体发育成熟即产生长翅成虫.解剖三个成熟群体中一个巢原始蚁王、蚁后均存在,另两巢发现原始蚁王、蚁后均死亡,其中一巢由群体内自行补充上了翅鳞型母蚁1头,无翅补充型生殖蚁1头(较小,性别不清),翅芽型3头.另一巢补充上了无翅型大腹母蚁1头,翅芽型1头.通过室内长期连续饲养观察,对该种白蚁新建群体发育成熟年龄及其内在因素已有一定的了解.     

尖唇散白蚁工蚁、兵蚁和繁殖蚁精子发生的比较研究

为探讨白蚁非生殖品级和生殖品级生殖细胞发育差异,采用组织学染色技术对尖唇散白蚁Reticulitermes aculabialis Tsaiet Hwang繁殖蚁、工蚁和兵蚁的精巢发育以及精子发生进行了显微观察和比较研究。结果发现3个品级间精巢发育的程度差异很大,三者精巢切面面积相对大小之比为:繁殖蚁∶工蚁=1.7∶1;繁殖蚁∶兵蚁=29.3∶1;工蚁∶兵蚁=17.1∶1。繁殖蚁和工蚁精巢管内有精子的形成,工蚁和繁殖蚁精子的发生都经历了精原细胞、初级精母细胞、次级精母细胞、精细胞和精子时期,但工蚁有大量次级精母细胞呈细胞凋亡状态。兵蚁生殖细胞发育仅有精原细胞、初级精母细胞、次级精母细胞,没有精细胞和精子产生。工蚁的生殖细胞显著小于同一时期繁殖蚁的生殖细胞,兵蚁的各时期生殖细胞均极显著小于繁殖蚁同一时期的生殖细胞。研究表明各品级之间生殖功能分化与生殖细胞发育有直接关系,工蚁有转化为补充繁殖蚁和兵蚁的能力;而兵蚁由于精巢极度退化不能产生精细胞和精子,因此是非生殖品级分化的终极形式,不具有转化成补充繁殖蚁或其它品级的能力。     

Collagen-like triple helix formation of synthetic (Pro-Pro-Gly)10 analogues: (4(S)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10, (4(R)-hydroxyprolyl-4(R)-hydroxyprolyl-Gly)10 and (4(S)-fluoroprolyl-4(R)-fluoroprolyl-Gly)10.

For the rational design of a stable collagen triple helix according to the conventional rule that the pyrrolidine puckerings of Pro, 4-hydroxyproline (Hyp) and 4-fluoroproline (fPro) should be down at the X-position and up at the Y-position in the X-Y-Gly repeated sequence for enhancing the triple helix propensities of collagen model peptides, a series of peptides were prepared in which X- and Y-positions were altogether occupied by Hyp(R), Hyp(S), fPro(R) or fPro(S). Contrary to our presumption that inducing the X-Y residues to adopt a down-up conformation would result in an increase in the thermal stability of peptides, the triple helices of (Hyp(S)-Hyp(R)-Gly)(10) and (fPro(S)-fPro(R)-Gly)(10) were less stable than those of (Pro-Hyp(R)-Gly)(10) and (Pro-fPro(R)-Gly)(10), respectively. As reported by B?chinger's and Zagari's groups, (Hyp(R)-Hyp(R)-Gly)(10) which could have an up-up conformation unfavorable for the triple helix, formed a triple helix that has a high thermal stability close to that of (Pro-Hyp(R)-Gly)(10). These results clearly show that the empirical rule based on the conformational preference of pyrrolidine ring at each of X and Y residues should not be regarded as still valid, at least for predicting the stability of collagen models in which both X and Y residues have electronegative groups at the 4-position.     

Synthesis and luminescence properties of a blue-emitting Sr(3.5) Y(6.5) O(2) (PO(4) )(1.5) (SiO(4) )(4.5) :Eu(2+) phosphor

A novel blue‐emitting Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:Eu²⁺ phosphor was synthesized via a solid‐state reaction. Powder X‐ray diffraction (XRD) analysis demonstrated that the Sr_3.5Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5 host had a hexagonal crystal structure in the space group P6₃/m and unit cell parameters a = 9.418 Å, c = 6.900 Å. The as‐prepared phosphor showed a blue emission and all the main emission peaks were located at around 466 nm for different excitation wavelengths of 297, 333 and 391 nm. The temperature dependence of the photoluminescence property was investigated in the range 20–250 °C, and the emission intensity decreased to 71% of the initial value at room temperature on increasing the temperature to 150 °C. According to the classical theory of fluorescent thermal quenching, the activation energy (ΔE) for the thermal quenching luminescence of the as‐prepared Sr_3.45Y_6.5O₂(PO₄)_1.5(SiO₄)_4.5:0.05Eu²⁺ phosphor was determined to be 0.20 eV. Copyright © 2011 John Wiley & Sons, Ltd.     

Role of tfdC(I)D(I)E(I)F(I) and tfdD(II)C(II)E(II)F(II) gene modules in catabolism of 3-chlorobenzoate by Ralstonia eutropha JMP134(pJP4)

The enzymes chlorocatechol-1,2-dioxygenase, chloromuconate cycloisomerase, dienelactone hydrolase, and maleylacetate reductase allow Ralstonia eutropha JMP134(pJP4) to degrade chlorocatechols formed during growth in 2,4-dichlorophenoxyacetate or 3-chlorobenzoate (3-CB). There are two gene modules located in plasmid pJP4, tfdC(I)D(I)E(I)F(I) (module I) and tfdD(II)C(II)E(II)F(II) (module II), putatively encoding these enzymes. To assess the role of both tfd modules in the degradation of chloroaromatics, each module was cloned into the medium-copy-number plasmid vector pBBR1MCS-2 under the control of the tfdR regulatory gene. These constructs were introduced into R. eutropha JMP222 (a JMP134 derivative lacking pJP4) and Pseudomonas putida KT2442, two strains able to transform 3-CB into chlorocatechols. Specific activities in cell extracts of chlorocatechol-1,2-dioxygenase (tfdC), chloromuconate cycloisomerase (tfdD), and dienelactone hydrolase (tfdE) were 2 to 50 times higher for microorganisms containing module I compared to those containing module II. In contrast, a significantly (50-fold) higher activity of maleylacetate reductase (tfdF) was observed in cell extracts of microorganisms containing module II compared to module I. The R. eutropha JMP222 derivative containing tfdR-tfdC(I)D(I)E(I)F(I) grew four times faster in liquid cultures with 3-CB as a sole carbon and energy source than in cultures containing tfdR-tfdD(II)C(II)E(II)F(II). In the case of P. putida KT2442, only the derivative containing module I was able to grow in liquid cultures of 3-CB. These results indicate that efficient degradation of 3-CB by R. eutropha JMP134(pJP4) requires the two tfd modules such that TfdCDE is likely supplied primarily by module I, while TfdF is likely supplied by module II.     

Induction of in vitro flowering in Dendrobium Madame Thong-In (Orchidaceae) seedlings is associated with increase in endogenous N(6)-(Delta (2)-isopentenyl)-adenine (iP) and N (6)-(Delta (2)-isopentenyl)-adenosine (iPA) levels

We analysed the endogenous cytokinin levels of Dendrobium Madame Thong-In seedlings grown in vitro during vegetative and flowering-inductive periods. HPLC was used to fractionate the extracts and radioimmunoassay (RIA) was used for assay of zeatin (Z), dihydrozeatin (DZ), N(6)-(Delta(2)-isopentenyl)-adenine (iP) and their derivatives. Coconut water used in experiments was found to contain high level (>136 pmol ml(-1)) of zeatin riboside (ZR). Protocorms and seedlings cultured in medium with coconut water were found to contain 0.5-3.9 pmol g(-1) FW of the cytokinins analysed. Seedlings (1.0-1.5 cm) cultured in flowering-inductive liquid medium containing 6-benzyladenine (BA, 4.4 muM) and coconut water (CW, 15%) contained up to 200 and 133 pmol g(-1) FW of iP and iPA, respectively. These levels were significantly higher than all other cytokinins analysed in seedlings of the same stage and were about 80- to 150-folds higher than seedlings cultured in non-inductive medium. During the transitional (vegetative to reproductive) stage, the endogenous levels of iP (178 pmol g(-1) FW) and iPA (63 pmol g(-1) FW) were also significantly higher than cytokinins in the zeatine (Z) and dihydrozeatin (DZ) families in the same seedlings. Seedlings that grew on inductive medium but remained vegetative contained lower levels of iPA. The importance of the profiles of iP and its derivatives in induction of in vitro flowering of D. Madame Thong-In is discussed.     

The helix-coil transitions of poly (dA)-poly (dT) and poly (dA-dT)-poly (dA-dT)

Helix–coil transition curves are calculated for poly (dA) poly(dT) and poly (dA-dT) poly (dA-dT) using the integral equation approach of Goel and Montroll.⁵ The transitions are described by the loop entropy model with the exponent of the loop entropy factor, k, remaining an arbitrary constant. The theoretical calculations are compared with experimental transition curves of the two polymers. Results indicate that the stacking energies for these two polymers differ by about 1 kcal/mole of base pairs. Also, a fit between theory and experiment was not possible for k > 1.70.     

Biology of Bactrocera (Zeugodacus) tau (Walker) (Diptera: Tephritidae)

The biology of the fruit fly Bactrocera tau, an important horticultural pest, was studied under laboratory conditions at 25°C and 60–70% relative humidity on Cucurbita maxima. The duration of mating averaged 408.03 ± 235.93 min. After mating, the female fly had a preoviposition period of 11.7 ± 4.49 days. The oviposition rate was 9.9 ± 8.50 eggs and fecundity was 464.6 ± 67.98 eggs/female. Eggs were elliptical, smooth and shiny white, turning darker as hatching approached, and measured 1.30 ± 0.07 mm × 0.24 ± 0.04 mm. The chorion has polygonal microsculpturing and is species-specific with polygonal walls. The egg period lasts for 1.3 ± 0.41 days. The duration of the larval period is 1.2 ± 0.42, 1.7 ± 0.48 and 4.0 ± 0.94 days for first, second and third instars, respectively. Pupation occurs in the sand or soil and pupal periods are 7.0 ± 0.47 days. The life cycle from egg to adult was completed in 14.2 ± 1.69 days; the longevity of mated females and males was 130.33 ± 14.18 and 104.66 ± 31.21 days, respectively. At least two to three generations were observed from June 2008 to June 2009.     

Spectroscopic investigations of Er(3+) :CdO-Bi(2) O(3) -B(2) O(3) glasses

This article reports on the optical properties of Er³⁺ ions doped CdO–Bi₂O₃–B₂O₃ (CdBiB) glasses. The materials were characterized by optical absorption and emission spectra. By using Judd–Ofelt theory, the intensity parameters Ω_λ (λ = 2, 4, 6) and also oscillatory strengths were calculated from the absorption spectra. The results were used to compute the radiative properties of Er³⁺:CdBiB glasses. The concentration quenching and energy transfer from Yb³⁺–Er³⁺ were explained. The stimulated emission cross‐section, full width at half maximum (FWHM) and FWHM × values are also calculated for all the Er³⁺:CdBiB glasses. Copyright © 2011 John Wiley & Sons, Ltd.