Assembly of Bacillus subtilis phage phi29. 1. Mutants in the cistrons coding for the structural proteins.

The effect of mutations in the cistrons coding for the phage structural proteins has been studied by analyzing the phage-related structures accumulated after restrictive infection. Infection with susmutants in cistron 8, lacking both the major head and the fiber protein, does not produce any phage-related structure, suggesting a single route for the assembly of phage phi29; infection with ts mutants in this cistron produces isometric particles. Mutants is cistron 9, coding for the tail protein, TP1, produce DNA-free prolate heads with an internal core; these particles are abortive and contain the head proteins HPO, HP1 and HP3, the upper collar protein NP2 and the nonstructural proteins p7, p15 and p16. Mutants in cistron 10, coding for the upper collar protein, NP2, produce DNA-free isometric heads also with an internal core; they contain the head proteins and the nonstructural protein p7, suggesting that this protein forms the internal core. Mutants in cistrons 11 and 12, coding for the lower collar protein, NP3, and the neck appendages, NP1, respectively, give rise to the formation of DNA-containing normal capsids and DNA-free prolate particles, more rounded at the corners than the normal capsids and with an internal core; the DNA-containing 11-particles are formed by the head proteins and the upper collar protein; the DNA-free 11-particles contain, besides these proteins, the nonstructural protein p7 and a small amount of proteins p15 and 16. The DNA-containing 12-particles have all the normal phage structural proteins except the neck appendages, formed by protein NP1; the DNA-free particles are similar to the DNA-free 11-particles. After restricitive infection mutant sus14(1241) has a delayed lysis phenotype and produces a phage burst higher than normal, after artificial lysis. It produces DNA-containing particles, identical to wild-type phage, which have all the normal phage structural proteins, and DNA-free prolate particles, more rounded at the corners than the final phage particles and with an internal core; the last particles contain the same proteins as the DNA-free 11 or 12-particles. These particles could represent a prohead state, ready for DNA encapsulation. None of the DNA-containing particles have the nonstructural proteins p7, p15 or p16, suggesting that these proteins are released from the proheads upon DNA encapsulation.     

Overproduction and purification of the connector protein of Bacillus subtilis phage phi 29.

A phi 29 DNA fragment containing genes 10 and 11, coding for the connector protein and the lower collar protein, respectively, has been cloned in the pBR322 derivative plasmid pKC30 under the control of the PL promoter of phage lambda. Two polypeptides with the electrophoretic mobility of proteins p10 and p11 were labelled with 35S-methionine after heat induction. The proteins were characterized as p10 and p11 by radioimmunoassay and they represented about 10% and 7%, respectively, of the total E. coli protein after 4 hours of induction. These proteins represent less than 1% of the B. subtilis protein in phi 29-infected cells. Protein p10 has been highly purified from the E. coli cells carrying the recombinant plasmid. Antibodies raised against the purified protein p10 reacted with the connector protein produced in phi 29-infected B. subtilis.     

Bacteriophage phi 29 proteins required for in vitro DNA-gp3 packaging

In vitro assembly of bacteriophage phi 29 in crude extracts involves efficient packaging of a DNA-protein complex (DNA- gp3 ) into a prohead with the aid of the gene 16 product ( gp16 ) and subsequent assembly of neck and tail proteins ( Bjornsti et al., J. Virol. 41:508-517, 1982; Bjornsti et al., J. Virol. 45:383-396, 1983; Bjornsti et al., Proc. Natl. Acad. Sci. U.S.A. 78:5861-5865, 1981). To define the viral proteins required for the DNA- gp3 encapsidation phase, we purified biologically active proheads and DNA- gp3 and constructed a chimeric plasmid, pUM101 , which contained and expressed gene 16 of phi 29 and no other viral genes. The plasmid-specified gp16 was both necessary and sufficient to package 24% of the DNA- gp3 added to the purified proheads , and the DNA-filled heads so produced were efficiently complemented to infectious phage by the addition of neck and tail proteins. Purified proheads and DNA- gp3 gave linear dose-response curves with slopes of approximately 1; in contrast, a 4-fold dilution of gp16 resulted in a 1,000-fold reduction of phi 29, suggesting a requirement for multiple copies of this protein.     

Morphogenesis of bacteriophage phi29 of Bacillus subtilis: cleavage and assembly of the neck appendage protein.

Each of the 12 neck appendages of the Bacillus subtilis bacteriophage phi29 consists of a single protein molecule with a molecular weight of about 75,000, and on the mature virion the appendages are assembled to the lower of two collars. The appendage protein is cleaved from a precursor protein, P(J), with a molecular weight of about 88,000. This cleavage is independent of neck assembly, occurring during infection by mutants that cannot synthesize the proteins of the upper and lower collars of the neck. The cleaved form of the appendage protein is efficiently complemented in vitro to particles lacking appendages. Thus, cleavage of the appendage precursor protein apparently does not occur in situ on the maturing virus.     

Composition and mass of the bacteriophage phi29 prohead and virion

The protein composition of the Bacillus subtilis bacteriophage phi29 prohead and virion was determined by combustion of gel bands of (3)H-labeled proteins. Copy numbers of individual proteins were calculated relative to the 12 copies of the head-tail connector protein. The mean numbers of copies of the major capsid protein in the prohead and virion were 241 and 218, respectively, approaching the 235 copies determined previously by cryoelectron microscopy. The mean numbers of copies of the dimeric head fiber on the prohead and virion were 24 and 31, respectively, demonstrating partial occupancy of the 55 fiber binding sites. Measured copies of neck and tail proteins in the virion included 11 of the lower collar, 58 of the appendage, and 9 of the tail; if the true copies of these proteins are 12, 60, and 9, respectively, the entire neck and tail of phi29 has quasi-sixfold symmetry. The mass of the fiberless prohead with pRNA was about 14.2 MDa, and the mass of the prohead determined by scanning transmission electron microscopy was consistent with the biochemical data. The mass of the fiberless virion containing the 12.8-MDa DNA genome was about 30.4 MDa. A full complement of dimeric fibers on the prohead or virion would increase the mass of the particle by about 3.2 MDa. The data complement studies relating the structure of phi29 components to dynamic functions in morphogenesis and infection.     

Morphogenesis of bacteriophage phi 29 of Bacillus subtilis: preliminary isolation and characterization of intermediate particles of the assembly pathway.

Three classes of particles have been identified in restrictive phi 29 suppressor-sensitive (sus) mutant infections of Bacillus subtilis, including DNA-containing heads or phage, prohead, and empty heads. Pulse-chase labeling experiments indicate that the prohead, the first particle assembled in 14-infected cells, is converted to DNA-filled heads and phi 29. In addition to the proteins Hd, P10, and F found in mature phi 29, the prohead contains a "core" protein P7 that exits as the prohead matures and appears to recycle during subsequent rounds of prohead assembly. Prohead-like structures accumulate in UV-irradiated cells and are present in restrictive infections with sus mutants of cistrons 9 and 16. Empty heads are observed only when infection results in the formation of DNA-containing particles; this and other evidence indicates that the empty heads are probably not true intermediates. Phage phi 29 assembly apparently occurs by a single pathway in which neck and tail components interact to stabilize the completed DNA-containing head.     

Analysis of gene function of bacteriophage phi 29 of Bacillus subtilis: identification of cistrons essential for viral assembly.

Restrictive infection of Bacillus subtilis by suppressor-sensitive (sus) mutants of phi 29 has been used to search for cistrons that function in viral assembly. The products of cistrons 7, 9, 10, and 16 are necessary for head morphogenesis. The neck upper collar protein P10 and the tail protein P9 must be present for DNA packaging to occur. The protein P7 must be present for phage-related particles to form. A prohead-like particle has been isolated during 16-restrictive infection. The particle is composed of the proteins Hd, P10, F, and P7. P16 must function for DNA-filled particles to accumulate. A DNA-containing particle produced in the absence of the cistron 11 product may be an intermediate in the phi 29 assembly pathway. The protein P13 interacts with P9 and P11 to form a stable DNA-filled particle. The products of cistrons 2 and 3 are essential for viral DNA synthesis, and in their absence virus-related particles are not detected.     

Structure of Bacillus subtilis bacteriophage phi 29 and the length of phi 29 deoxyribonucleic acid

Anderson, D. L. (University of Minnesota, Minneapolis), D. D. Hickman, and B. E. Reilly. Structure of Bacillus subtilis bacteriophage phi29 and the length of phi29 deoxyribonucleic acid. J. Bacteriol. 91:2081-2089. 1966-Bacillus subtilis bacteriophage phi29 were negatively stained with phosphotungstic acid. The head of phi29 has a hexagonal outline with a flattened base, and is about 315 A wide and 415 A in length. The virus has an intricate tail about 325 A in length. Twelve spindle-shaped appendages are attached to the lower of two collars which comprise the proximal portion of the tail. The distal 130 A of the tail axis has a diameter of about 60 A and is larger in diameter than the axis of the upper portion of the tail. Comparison of electron microscopic counts of phi29 with plaque-forming units indicated that about 50% of the microscopic entities were infective. Phenol-extracted phi29 deoxyribonucleic acid (DNA) molecules were prepared for electron microscopy by the cytochrome c film technique of Kleinschmidt et al. Measurement of contour lengths of DNA molecules from three preparations gave skewed distributions of lengths with observed modal class values ranging from 5.7 to 5.9 mu. Assuming that phi29 DNA is a double helix in the B form, the corresponding molecular weights would be 10.9 x 10(6) to 11.3 x 10(6) daltons. The largest DNA molecules would have a volume of 1.9 x 10(7) A(3) which is about 25% greater than the estimated 1.4 x 10(7) A(3) internal volume of the phage head.     

Initiation of phage phi 29 DNA replication by mutants with deletions at the amino end of the terminal protein

Series of deletions at the amino end of protein p3, the phage phi 29 DNA terminal protein (TP), have been constructed and characterized. Measurements of the activity of the deletion mutants in the formation of the protein p3-dAMP initiation complex in vitro indicate the dispensability of the first 13 amino acids (aa) of the protein. The activity of protein p3 decreased considerably when 17 or more aa were deleted. The results on the in vitro phi 29 DNA replication primed by the p3 deletion mutants correlated very well with those obtained in the formation of the TP-dAMP initiation complex.     

DNA poised for release in bacteriophage phi29

We present here the first asymmetric, three-dimensional reconstruction of a tailed dsDNA virus, the mature bacteriophage phi29, at subnanometer resolution. This structure reveals the rich detail of the asymmetric interactions and conformational dynamics of the phi29 protein and DNA components, and provides novel insight into the mechanics of virus assembly. For example, the dodecameric head-tail connector protein undergoes significant rearrangement upon assembly into the virion. Specific interactions occur between the tightly packed dsDNA and the proteins of the head and tail. Of particular interest and novelty, an approximately 60A diameter toroid of dsDNA was observed in the connector-lower collar cavity. The extreme deformation that occurs over a small stretch of DNA is likely a consequence of the high pressure of the packaged genome. This toroid structure may help retain the DNA inside the capsid prior to its injection into the bacterial host.     

Mechanism of stimulation of DNA replication by bacteriophage phi 29 single-stranded DNA-binding protein p5

Protein p5 is a Bacillus subtilis phage phi 29-encoded protein required for phi 29 DNA replication in vivo. Protein p5 has single-stranded DNA binding (SSB) capacity and stimulates in vitro DNA replication severalfold when phi 29 DNA polymerase is used to replicate either the natural phi 29 DNA template or primed M13 single-stranded DNA (ssDNA). Furthermore, other SSB proteins, including Escherichia coli SSB, T4 gp32, adenovirus DNA-binding protein, and human replication factor A, can functionally substitute for protein p5. The stimulatory effect of phi 29 protein p5 is not due to an increase of the DNA replication rate. When both phi 29 DNA template and M13 competitor ssDNA are added simultaneously to the replication reaction, phi 29 DNA replication is strongly inhibited. This inhibition is fully overcome by adding protein p5, suggesting that protein p5-coated M13 ssDNA is no longer able to compete for replication factors, probably phi 29 DNA polymerase, which has a strong affinity for ssDNA. Electron microscopy demonstrates that protein p5 binds to M13 ssDNA forming saturated complexes with a smoothly contoured appearance and producing a 2-fold reduction of the DNA length. Protein p5 also binds to ssDNA in the phi 29 replicative intermediates produced in vitro, which are similar in structure to those observed in vivo. Our results strongly suggest that phi 29 protein p5 is the phi 29 SSB protein active during phi 29 DNA replication.     

Replication of phage phi 29 DNA in vitro: role of the viral protein p6 in initiation and elongation.

The phi 29 protein p6 stimulates the formation of the protein p3-dAMP initiation complex when added to a minimal system containing the terminal protein p3, the phi 29 DNA polymerase p2 and phi 29 DNA-protein p3 complex, by decreasing about 5 fold the Km value for dATP. In addition, protein p6 stimulates elongation of the p3-dAMP initiation complex. Whereas the effect of protein p6 on initiation is similar with protein p3-containing fragments from the right or left phi 29 DNA ends, the stimulation of elongation is higher with the right than with the left phi 29 DNA terminal fragment, suggesting DNA sequence specificity. The stimulation by protein p6 of the initiation and elongation steps of phi 29 DNA replication does not require the presence of the parental protein p3 at the phi 29 DNA ends. No effect of protein p6 was obtained on the elongation of the template-primer poly(dT)-(dA) 12-18 by the phi 29 DNA polymerase.     

Compartmentalization of phage phi29 DNA replication: interaction between the primer terminal protein and the membrane-associated protein p1

The bacteriophage phi29 replication protein p1 (85 amino acids) is membrane associated in Bacillus subtilis-infected cells. The C-terminal 52 amino acid residues of p1 are sufficient for assembly into protofilament sheet structures. Using chemical cross-linking experiments, we demonstrate here that p1DeltaC43, a C-terminally truncated p1 protein that neither associates with membranes in vivo nor self-interacts in vitro, can interact with the primer terminal protein (TP) in vitro. Like protein p1, plasmid-encoded protein p1DeltaC43 reduces the rate of phi29 DNA replication in vivo in a dosage-dependent manner. We also show that truncated p1 proteins that retain the N-terminal 42 amino acids, when present in excess, interfere with the in vitro formation of the TP.dAMP initiation complex in a reaction that depends on the efficient formation of a primer TP-phi29 DNA polymerase heterodimer. This interference is suppressed by increasing the concentration of either primer TP or phi29 DNA polymerase. We propose a model for initiation of in vivo phi29 DNA replication in which the viral replisome attaches to a membrane-associated p1-based structure.     

Deletions at the N terminus of bacteriophage phi 29 protein p6: DNA binding and activity in phi 29 DNA replication

Deletions corresponding to the first 5 or 13 amino acids (aa), not counting the initial Met, have been introduced into the N terminus of the phage phi 29 protein p6. The activity of such proteins in the in vitro phi 29 DNA replication system, their capacity to interact with the phi 29 DNA ends, and their interference with the wild type (wt) protein p6 activity have been studied. The initiation activity of protein p6 decreased considerably when 5 as were deleted and was undetectable when 13 aa were removed. The mutant proteins were unable to specifically interact with the phi 29 DNA ends. These results indicate the need of an intact N terminus for the activity of protein p6. However, such N-truncated proteins inhibited both the specific binding of the wt protein p6 to the phi 29 DNA ends and its activity in phi 29 DNA replication.     

Assembly of phage phi 29 genome with viral protein p6 into a compact complex.

The formation of a multimeric nucleoprotein complex by the phage phi 29 dsDNA binding protein p6 at the phi 29 DNA replication origins, leads to activation of viral DNA replication. In the present study, we have analysed protein p6-DNA complexes formed in vitro along the 19.3 kb phi 29 genome by electron microscopy and micrococcal nuclease digestion, and estimated binding parameters. Under conditions that greatly favour protein-DNA interaction, the saturated phi 29 DNA-protein p6 complex appears as a rigid, rod-like, homogeneous structure. Complex formation was analysed also by a psoralen crosslinking procedure that did not disrupt complexes. The whole phi 29 genome appears, under saturating conditions, as an irregularly spaced array of complexes approximately 200-300 bp long; however, the size of these complexes varies from approximately 2 kb to 130 bp. The minimal size of the complexes, confirmed by micrococcal nuclease digestion, probably reflects a structural requirement for stability. The values obtained for the affinity constant (K(eff) approximately 10(5) M-1) and the cooperativity parameter (omega approximately 100) indicate that the complex is highly dynamic. These results, together with the high abundance of protein p6 in infected cells, lead us to propose that protein p6-DNA complexes could have, at least at some stages, during infection, a structural role in the organization of the phi 29 genome into a nucleoid-type, compact nucleoprotein complex.     

Morphogenesis of Bacteriophage φ80: Identification of the Cistron 13 Product

An in vitro complementation reaction leading to the assembly of bacteriophage phi80 tails from component proteins is described. Tail assembly occurs when a lysate of any mutant in cistron 13 is mixed with a second lysate of a mutant in any of the other cistrons involved in tail formation. Lysates of mutants that are blocked in tail formation contain phage heads that can unite with free tails to form infective particles. The rate of the complementation reaction shows little dependence upon temperature, suggesting that the assembly depends largely upon the kinetic encounter of the interacting components. The tail component missing in cistron 13 mutant lysates was purified approximately 55-fold and shown to be, at least in part, a protein having a molecular weight of approximately 22,000. This protein was also released from highly purified infective phi80 particles after osmotic shock followed by heattreatment, suggesting that it most probably is an integral structural protein of the phage tail. Lysates of mutants of bacteriophage lambda that are defective in tail formation were shown to contain a tail component identical with or similar to the phi80 cistron 13 product.     

Transition from initiation to elongation in protein-primed phi 29 DNA replication: salt-dependent stimulation by the viral protein p6.

The transition step from the p3-dAMP initiation complex to the first elongated products, p3-(dAMP)2 and p3-(dAMP)3, requires a dATP concentration higher than that needed for the initiation reaction or for the further elongation of the p3-(dAMP)3 complex. The elongation in phi 29 DNA-protein p3 replication in vitro was strongly inhibited by salt. Under inhibitory salt concentration, the viral protein p6 greatly stimulated phi 29 DNA-protein p3 replication. The effect of protein p6 was not on the rate of elongation but on the amount of elongated product, stimulating the transition from initiation to formation of the first elongation products.     

Structure of the head-tail connector of bacteriophage φ29

The head-to-tail connecting region of bacteriophage φ29 has been studied by isolating neck-tail complexes from disrupted phage. These complexes can be isolated with appendages (from wild-type phage) or without appendages (from phage mutant sus12). Treatment of the neck-tail complex without appendages with urea or guanidinium hydrochloride releases the tail protein (p9) from the neck complex (proteins p10 and p11). Electron micrographs of φ29 necks show that they are composed of two collars and a thin axial tube. There is an internal hole along the longitudinal axis, from the upper collar to the thin tube.Image-processing analysis of electron micrographs of two-dimensional crystals of necks shows that the neck of phage φ29 consists of 12 external units and an internal area of apparent 6-fold symmetry, with a hole in the centre.     

The integral membrane protein p16.7 organizes in vivo phi29 DNA replication through interaction with both the terminal protein and ssDNA

Remarkably little is known about the in vivo organization of membrane-associated prokaryotic DNA replication or the proteins involved. We have studied this fundamental process using the Bacillus subtilis phage phi29 as a model system. Previously, we demonstrated that the phi29-encoded dimeric integral membrane protein p16.7 binds to ssDNA and is involved in the organization of membrane-associated phi29 DNA replication. Here we demonstrate that p16.7 forms multimers, both in vitro and in vivo, and interacts with the phi29 terminal protein. In addition, we show that in vitro multimerization is enhanced in the presence of ssDNA and that the C-terminal region of p16.7 is required for multimerization but not for ssDNA binding or interaction with the terminal protein. Moreover, we provide evidence that the ability of p16.7 to form multimers is crucial for its ssDNA-binding mode. These and previous results indicate that p16.7 encompasses four distinct modules. An integrated model of the structural and functional domains of p16.7 in relation to the organization of in vivo phi29 DNA replication is presented.