Effects of the non-Newtonian viscosity of blood on flows in a diseased arterial vessel. Part 1: Steady flows

Effects of the non-Newtonian viscosity of blood on a flow in a coronary arterial casting of man were studied numerically using a finite element method. Various constitutive models were examined to model the non-Newtonian viscosity of blood and their model constants were summarized. A method to incorporate the non-Newtonian viscosity of blood was introduced so that the viscosity could be calculated locally. The pressure drop, wall shear stress and velocity profiles for the case of blood viscosity were compared for the case of Newtonian viscosity (0.0345 poise). The effect of the non-Newtonian viscosity of blood on the overall pressure drop across the arterial casting was found to be significant at a flow of the Reynolds number of 100 or less. Also in the region of flow separation or recirculation, the non-Newtonian viscosity of blood yields larger wall shear stress than the Newtonian case. The origin of the non-Newtonian viscosity of blood was discussed in relation to the viscoelasticity and yield stress of blood.     

Validation protocol of models for centre of mass estimation.

The estimation of the body centre-of-mass (COM) position requires the modelling of the human body as a system of rigid segments and the measurement of the position of related external anatomical landmarks. Many models for COM position estimation have been proposed with different levels of complexity and, in some cases, specific protocols have been used for model accuracy evaluation. In this paper, we propose a general method for the quantitative assessment of any COM model in relation to a determined set of movements. It consists of an experimental protocol and of a set of comparative indices, which quantify the congruence among the estimated kinematic variables and their expected values. The general applicability of the method is specifically addressed to models' comparison, aiming to support the user in the process of choice and validation of the most suitable model for her/his purposes. In this frame, the results of the analytical comparison among two kinematic models with different levels of complexity are reported.     

Change in the rheologic properties of blood during the early postreanimation period]

Experiments were conducted on nembutal-anesthetized cats; a study was made of the dynamic viscosity of the blood, and also of an aggregation capacity of the blood formed elements for two hours of the postresuscitative period. There was established an increase in the viscosity both in the zone of a low (1.82 dynes/cm2) and high (10.94 dynes/cm2) sear stress. A definite role in increase of the blood viscosity is played by a rise in the hematocrite index and by enhanced aggregation capacity of the blood formed elements.     

Miscibility studies of HPMC/PEG blends in water by viscosity,density, refractive index and ultrasonic velocity method

Hydroxy propyl methyl cellulose (HPMC)/polyethylene glycol (PEG) blends are edible polymer films used for food packing and directly in foodstuffs. However, they are water-soluble in ordinary temperature and have good mechanical properties. The miscibility of HPMC/PEG blend in water was studied by viscosity, ultrasonic velocity, density and refractive index techniques at 30 and 50 °C. Using viscosity data, the interaction parameters μ and α were calculated. These values revealed that HPMC/PEG blend is miscible when the HPMC content is more than 60 wt.% in the blend at 30 and 50 °C, below which is immiscible. Further the result was also confirmed by ultrasonic velocity, density, refractive index measurements, which also revealed that the change in temperature has no significant effect on the miscibility of HPMC/PEG polymer blend.     

A vesicle microrheometer for high-throughput viscosity measurements of lipid and polymer membranes

Viscosity is a key property of cell membranes that controls mobility of embedded proteins and membrane remodeling. Measuring it is challenging because existing approaches involve complex experimental designs and/or models, and the applicability of some methods is limited to specific systems and membrane compositions. As a result there is scarcity of systematic data, and the reported values for membrane viscosity vary by orders of magnitude for the same system. Here, we show how viscosity of membranes can be easily obtained from the transient deformation of giant unilamellar vesicles. The approach enables a noninvasive, probe-independent, and high-throughput measurement of the viscosity of membranes made of lipids or polymers with a wide range of compositions and phase state. Using this novel method, we have collected a significant amount of data that provides insights into the relation between membrane viscosity, composition, and structure.     

Utilizing the Metallic Nano-Rods in Hexagonal Configuration to Enhance Sensitivity of the Plasmonic Racetrack Resonator in Sensing Application

A high sensitive plasmonic refractive index sensor based on metal-insulator-metal (MIM) waveguides with embedding metallic nano-rods in racetrack resonator has been proposed. The refractive index changes of the dielectric material inside the resonator together with temperature changes can be acquired from the detection of the resonance wavelength, based on their linear relationship. With optimum design and considering a tradeoff among detected power, structure size, and sensitivity, the finite difference time domain simulations show that the refractive index and temperature sensitivity values can be obtained as high as 2610 nm per refractive index unit (RIU) and 1.03 nm/°C, respectively. In addition, resonance wavelengths of resonator are obtained experimentally by using the resonant conditions. The effects of nano-rods radius and refractive index of racetrack resonator are studied on the sensing spectra, as well. The proposed structure with such high sensitivity will be useful in optical communications that can provide a new possibility for designing compact and high-performance plasmonic devices.     

Refractive index sensing of green fluorescent proteins in living cells using fluorescence lifetime imaging microscopy

We show that fluorescence lifetime imaging microscopy (FLIM) of green fluorescent protein (GFP) molecules in cells can be used to report on the local refractive index of intracellular GFP. We expressed GFP fusion constructs of Rac2 and gp91^phox, which are both subunits of the phagocyte NADPH oxidase enzyme, in human myeloid PLB-985 cells and showed by high-resolution confocal fluorescence microscopy that GFP-Rac2 and GFP-gp91^phox are targeted to the cytosol and to membranes, respectively. Frequency-domain FLIM experiments on these PLB-985 cells resulted in average fluorescence lifetimes of 2.70 ns for cytosolic GFP-Rac2 and 2.31 ns for membrane-bound GFP-gp91^phox. By comparing these lifetimes with a calibration curve obtained by measuring GFP lifetimes in PBS/glycerol mixtures of known refractive index, we found that the local refractive indices of cytosolic GFP-Rac2 and membrane-targeted GFP-gp91^phox are ∼1.38 and ∼1.46, respectively, which is in good correspondence with reported values for the cytosol and plasma membrane measured by other techniques. The ability to measure the local refractive index of proteins in living cells by FLIM may be important in revealing intracellular spatial heterogeneities within organelles such as the plasma and phagosomal membrane.     

A comparison of five methods for obtaining the intrinsic viscosity of bovine serum albumin

Intrinsic viscosity [η] is a characteristic of proteins and other molecules related directly to their ability to disturb flow and indirectly to their size and shape. It is usually determined by extrapolating reduced viscosity to zero concentration. Four other methods for deriving [η] have been utilized by previous investigators. Studies of the intrinsic viscosity of bovine serum albumin had been carried out two years apart as a test of viscometry technique; the data obtained were used to compare the five methods. Four of the five produced [η] values ranging from 3.92 to 4.21 ml/g. Agreement was good between the two studies. The five methods were compared to each other using linearity of regression, statistical error of determination, effect of varying solvent time, and result obtained in different concentration ranges. By these four criteria, use of the regression of specific fluidity (1 ? 1/η_rel) with concentration was found superior to other methods. Its only deficiency was a requirement that solution density be corrected for at each concentration studied rather than applying a single correction for density after using kinematic viscosity data. All methods for deriving intrinsic viscosity are based on one of three equations; flow is expressed either in terms of reduced viscosity (Huggins), inherent viscosity (Kraemer), or specific fluidity. Of these three equations, specific fluidity is the most closely related both to theoretical analyses and to experimental studies of rigid spheres. There is abundant evidence in past reports that in contrast to rigid spheres, flexible polymers do not produce a linear rise in specific fluidity as their concentration increases, strongly suggesting that their molecular conformation is changing with concentration. A linear relation between fluidity and concentration has been observed for almost all proteins and protein mixtures studied. When this linear relation is present it indicates both that molecular conformation during flow is independent of concentration in the range studied and that the specific fluidity method for deriving intrinsic viscosity is the most appropriate.     

The effects of chronic long-term intermittent hypobaric hypoxia on blood rheology parameters

The effect of chronic long-term intermittent hypobaric hypoxia (CLTIHH) on blood rheology is not completely investigated. We designed this study to determine the effect of CLTIHH on blood rheology parameters. Present study was performed in 16 male Spraque-Dawley rats that divided into CLTIHH and Control groups. To obtain CLTIHH, rats were placed in a hypobaric chamber (430 mmHg; 5 hours/day, 5 days/week, 5 weeks). The control rats stayed in the same environment as the CLTIHH rats but they breathed room air. In the blood samples aspirated from the heart, hematocrit, whole blood viscosity, plasma viscosity, plasma fibrinogen concentration, erythrocyte rigidity index and oxygen delivery index were determined. The whole blood viscosity, plasma viscosity, hematocrit and fibrinogen concentration values in the CLTIHH group were found to be higher than those of the control group. However, no significant difference was found in erythrocyte rigidity index and oxygen delivery index between the groups. Our results suggested that CLTIHH elevated whole blood viscosity by increasing plasma viscosity, fibrinogen concentration and hematocrit value without effecting the erythrocyte deformability. Hence, CLTIHH that may occur in intermittent high altitude exposure and some severe obstructive sleep apnea (OSA) patients may be responsible for hemorheologic changes in those subjects.     

Short order nanohole arrays in metals for highly sensitive probing of local indices of refraction as the basis for a highly multiplexed biosensor technology

A small array of subwavelength apertures patterned in a gold film on glass was characterized for use as a biosensor. It is widely believed that such arrays allow the resonance of photons with surface plasmons in the metallic film. Surface plasmon methods (and other evanescent wave methods) are extremely well suited for the measure of real time biospecific interactions. An extremely high sensitivity of 88,000%/refractive index unit was measured on an array with theoretical active area of .09 microm2. The formation of a biological monolayer was monitored. Both sensitivity and resolution were determined through measurement. The measured resolution, for a sensor with an active area of less than 1.5 microm2, is 9.4 x 10(-8) refractive index units which leads to a calculated sensitivity of 3.45E6%/refractive index unit. These values far exceed theoretical and calculated values of other grating coupled surface plasmon resonance (SPR) detectors and prism based SPR detectors. Because the active sensing area can be quite small (.025 microm2) single molecule studies are possible as well as massive multiplexing on a single chip format.     

Electromagnetically Induced Transparency and Refractive Index Sensing for a Plasmonic Waveguide with a Stub Coupled Ring Resonator

A plasmonic refractive index sensor based on electromagnetically induced transparency (EIT) composed of a metal-insulator-metal (MIM) waveguide with stub resonators and a ring resonator is presented. The transmission properties and the refractive index sensitivity are numerically studied with the finite element method (FEM). The results revealed an EIT-like transmission spectrum with an asymmetric line profile and a refractive index sensitivity of 1057 nm/RIU are obtained. The coupled mode theory (CMT) based on transmission line theory is adopted to illustrate the EIT-like phenomenon. Multiple EIT-like peaks are observed in the transmission spectrum of the derived structures based on the MIM waveguide with stub resonator coupled ring resonator. To analyze the multiple EIT-like modes of the derived structures, the H _z field distribution is calculated. In addition, the effect of the structural parameters on the EIT-like effect is also studied. These results provide a new method for the dynamic control of light in the nanoscale.     

Theory for flow of Casson and Herschel-Bulkley fluids in cone-plate viscometers

Mathematical models for blood flow in cone-plate viscometer have been considered, by assuming blood as a Casson/Herschel-Bulkley fluid. Three different cases have been analyzed (i) when there is no shearing, (ii) partial shearing and (iii) full shearing. The relationships between the angular velocity and torque have been obtained for the above three cases. By assuming total shearing, the analytical expression for apparent viscosity has been obtained. Variation of apparent viscosity with yield stress, angular velocity, Casson co-efficient of viscosity, consistency index and flow behaviour index has been computed. It is observed that as the angular velocity increases, the apparent viscosity decreases for both fluids. Further, it is found that as the cone angle increases, the apparent viscosity increases. This behaviour of apparent viscosity in cone-plate viscometer is interesting and unexpected and is being reported first time.     

Realistic non-Newtonian viscosity modelling highlights hemodynamic differences between intracranial aneurysms with and without surface blebs

Most computational fluid dynamic (CFD) simulations of aneurysm hemodynamics assume constant (Newtonian) viscosity, even though blood demonstrates shear-thinning (non-Newtonian) behavior. We sought to evaluate the effect of this simplifying assumption on hemodynamic forces within cerebral aneurysms, especially in regions of low wall shear stress, which are associated with rupture. CFD analysis was performed for both viscosity models using 3D rotational angiography volumes obtained for 26 sidewall aneurysms (12 with blebs, 12 ruptured), and parametric models incorporating blebs at different locations (inflow/outflow zone). Mean and lowest 5% values of time averaged wall shear stress (TAWSS) computed over the dome were compared using Wilcoxon rank-sum test. Newtonian modeling not only resulted in higher aneurysmal TAWSS, specifically in areas of low flow and blebs, but also showed no difference between aneurysms with or without blebs. In contrast, for non-Newtonian analysis, bleb-bearing aneurysms showed significantly lower 5% TAWSS compared to those without (p=0.005), despite no significant difference in mean dome TAWSS (p=0.32). Non-Newtonian modeling also accentuated the differences in dome TAWSS between ruptured and unruptured aneurysms (p<0.001). Parametric models further confirmed that realistic non-Newtonian viscosity resulted in lower bleb TAWSS and higher focal viscosity, especially when located in the outflow zone. The results show that adopting shear-thinning non-Newtonian blood viscosity in CFD simulations of intracranial aneurysms uncovered hemodynamic differences induced by bleb presence on aneurysmal surfaces, and significantly improved discriminant statistics used in risk stratification. These findings underline the possible implications of using a realistic model of blood viscosity in predictive computational hemodynamics.     

Measuring unfolding of proteins in the presence of denaturant using fluorescence correlation spectroscopy

IFABP is a small (15 kDa) protein consisting mostly of antiparallel beta-strands that surround a large cavity into which ligands bind. We have previously used FCS to show that the native protein, labeled with fluorescein, exhibits dynamic fluctuation with a relaxation time of 35 micros. Here we report the use of FCS to study the unfolding of the protein induced by guanidine hydrochloride. Although the application of this technique to measure diffusion coefficients and molecular dynamics is straightforward, the FCS results need to be corrected for both viscosity and refractive index changes as the guanidine hydrochloride concentration increases. We present here a detailed study of the effects of viscosity and refractive index of guanidine hydrochloride solutions to calibrate FCS data. After correction, the increase in the diffusion time of IFABP corresponds well with the unfolding transition monitored by far ultraviolet circular dichroism. We also show that the magnitude of the 35 micros phase, reflecting the conformational fluctuation in the native state, decreases sharply as the concentration of denaturant increases and the protein unfolds. Although FCS experiments indicate that the unfolded state at pH 2 is rather compact and native-like, the radius in the presence of guanidine hydrochloride falls well within the range expected for a random coil.     

Miscibility studies of HPMC/PVA blends in water by viscosity, density, refractive index and ultrasonic velocity method

Hydroxy propyl methyl cellulose (HPMC)/polyvinyl alcohol (PVA) blends are edible polymer films used for food packing and directly in foodstuffs. However they are water-soluble in ordinary temperature and have good mechanical properties. The miscibility of HPMC/PVA blend in water was studied by viscosity, ultrasonic velocity, density and refractive index techniques at 30 and 50 °C. Using viscosity data, the interaction parameters μ and α were calculated. These values revealed that HPMC/PVA blend is miscible when the HPMC content is more than 60% in the blend at 30 and 50 °C. And also the result revealed that the change in temperature has no significant effect on the miscibility of HPMC/PVA polymer blend.     

Theoretical and experimental analysis of the sedimentation kinetics of concentrated red cell suspensions in a centrifugal field: determination of the aggregation and deformation of RBC by flux density and viscosity functions

The flow properties of blood are mostly determined using various viscometric approaches, and described in terms of a shear rate or shear stress dependent apparent viscosity. The interpretation of results are rather difficult, especially at low shear rates when particle sedimentation and migration within the viscometer gap are significant. By contrast, analysing the separation process in concentrated RBC suspensions in a centrifugal field also yields information about the viscosity function, including particle-particle interaction and deformation parameters. In this paper, the sedimentation process is approached by means of the theory of kinematic waves and theoretically described by solving the corresponding one-dimensional quasi-linear partial differential equation based on viscosity/flow function as a function of volume concentration. The sedimentation kinetics of rigid spherical RBC suspended in saline and normal RBC suspended in Dx-saline solutions were investigated by means of a separation analyser (LUMiFuge 114). The instrument detects the light transmission over the total length of the cell containing the suspension. During centrifugation the analyser automatically determines the position of the particle free fluid/suspension interface or the sediment by means of a special algorithm. The data obtained with sedimentation of rigid spherical RBC at different volume concentrations demonstrate that, in the case of suspensions rotated in containers of constant cross section, there is good agreement between the theory of kinematic waves developed by Anestis and Schneider (1983) and the results of the experiments. Such good agreement was obtained even though a restrictive one-dimensional model was used to obtain the theoretically derived sedimentation time course. In addition, we describe an algorithm enabling the experimental determination of the viscosity and related flux density function to be made for any suspension. Through this approach, we investigated in detail the rheological behavior of suspended rigid spheres at low Reynolds numbers ranging from 10(-6) to 10(-3). The method here introduced also enabled us to investigate RBC suspensions with respect to the deformability and interactions of the cells by means of the separation analysis. Normal, rigid as well as aggregating RBC exhibited marked differences in the sedimentation kinetics, which were quantified by means of the flux and viscosity functions based on the theory of kinematic waves.     

Viscosity properties of mineral paraffinic base oils as a key factor in their primary biodegradability

The primary biodegradability of two types of paraffinic base oils (solvent and catalytically dewaxed oils) and their blends was evaluated using the CEC L-33-A-93 test. The biodegradability values varied between 10% and 75%. Base oil mixtures displayed varying contents in aromatic and polar compounds and a wide range of kinematic viscosity (KV) values, from roughly 10 to 600 cSt (at 40°C), while their viscosity indices were almost constant (90-100). The biodegradability of oils was closely related to their content in polycyclic aromatic hydrocarbons and was also decreasing with kinematic viscosity. For the two types of base oils, a linear relationship could be set between the biodegradation percentages and the logarithms of KV values. These results show that, beside overall chemical features such as the contents in aromatic compounds, KV may be a prominent parameter for assessing the primary biodegradability of mineral base oils.     

An instrumented wheel for kinetic analysis of wheelchair propulsion.

An instrumented wheel system for three-dimensional kinetic analysis of upper extremity during wheelchair propulsion has been designed and validated. This system allows the direct measurements of three-dimensional dynamic forces and moments on the handrim during wheelchair propulsion in a laboratory setting as well as in the field. Static loading tests showed a high linearity and little drift (coefficient of determination, r2 > 0.999). Under dynamic loading, the instrumented wheel provided the well-matched measurement forces and moments with the predicted values from the inverse dynamic method using video-based kinematic data (correlation coefficient, p > 0.97). The three-dimensional handrim forces and moments during wheelchair propulsion by a non-disabled subject were demonstrated.     

Cell and nucleus refractive‐index mapping by interferometric phase microscopy and rapid confocal fluorescence microscopy

We present a multimodal technique for measuring the integral refractive index and the thickness of biological cells and their organelles by integrating interferometric phase microscopy (IPM) and rapid confocal fluorescence microscopy. First, the actual thickness maps of the cellular compartments are reconstructed using the confocal fluorescent sections, and then the optical path difference (OPD) map of the same cell is reconstructed using IPM. Based on the co‐registered data, the integral refractive index maps of the cell and its organelles are calculated. This technique enables rapidly measuring refractive index of live, dynamic cells, where IPM provides quantitative imaging capabilities and confocal fluorescence microscopy provides molecular specificity of the cell organelles. We acquire human colorectal adenocarcinoma cells and show that the integral refractive index values are similar for the whole cell, the cytoplasm and the nucleus on the population level, but significantly different on the single cell level.     

肝郁脾虚证模型大鼠血流变及TXB_2、PGFla的变化（英文）

目的：探查中医肝郁脾虚证模型的血流变及相关调节因子的状态。方法：采用慢性束缚应激＋过度疲劳＋饮食失节法建立大鼠肝郁脾虚证模型,测定大鼠造模三周、自然恢复一周时的血流变和血浆TXB2、PGF1a。结果：与正常组相比,模型组大鼠造模三周150/s、38/s、10/s、5/s切变率下的全血粘度、还原粘度均显著升高（P〈0.001）,红细胞聚集指数显著降低（P〈0.001）,红细胞压积显著升高（P〈0.01）,红细胞变形指数无显著性差异（P〉0.05）;血浆TXB2显著升高（P〈0.001）,6-keto-PGF1a显著降低（P〈0.05）,TXB2/PGF1a显著升高（P〈0.01）;模型组大鼠第四周150/s、38/s、10/s、5/s切变率下的全血粘度、还原粘度仍显著升高（P〈0.001或P〈0.01）;红细胞聚集指数显著降低（P〈0.001）;红细胞压积与变形指数无显著性差异（P〉0.05）;血浆TXB2和TXB2/PGF1a显著降低（P〈0.05）,6-keto-PGF1a显著升高（P〈0.05）。结论：肝郁脾虚证大鼠存在血液高粘和血栓易形成状态,恢复期血液高粘同时伴有扩血管因素的加强。提示肝郁脾虚证有血流变的异常和血浆TXB2-PGI2的平衡失调,主要涉及到血小板和血浆因素的参与。