Formulation and <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Lipid-Based Terbutaline Sulphate Bi-layer Tablets for Once-Daily Administration

The objective of this study was to prepare and evaluate terbutaline sulphate (TBS) bi-layer tablets for once-daily administration. The bi-layer tablets consisted of an immediate-release layer and a sustained-release layer containing 5 and 10 mg TBS, respectively. The sustained-release layer was developed by using Compritol®888 ATO, Precirol® ATO 5, stearic acid, and tristearin, separately, as slowly eroding lipid matrices. A full 4?×?2² factorial design was employed for optimization of the sustained-release layer and to explore the effect of lipid type (X ₁), drug–lipid ratio (X ₂), and filler type (X ₃) on the percentage drug released at 8, 12, and 24 h (Y ₁, Y ₂, and Y ₃) as dependent variables. Sixteen TBS sustained-release matrices (F1–F16) were prepared by melt solid dispersion method. None of the prepared matrices achieved the targeted release profile. However, F2 that showed a relatively promising drug release was subjected to trial and error optimization for the filler composition to develop two optimized matrices (F17 and F18). F18 which consisted of drug–Compritol®888 ATO at ratio (1:6 w/w) and Avicel PH 101/dibasic calcium phosphate mixture of 2:1 (w/w) was selected as sustained-release layer. TBS bi-layer tablets were evaluated for their physical properties, in vitro drug release, effect of storage on drug content, and in vivo performance in rabbits. The bi-layer tablets showed acceptable physical properties and release characteristics. In vivo absorption in rabbits revealed initial high TBS plasma levels followed by sustained levels over 24 h compared to immediate-release tablets.     

QbD-Oriented Development and Characterization of Effervescent Floating-Bioadhesive Tablets of Cefuroxime Axetil

The objective of the present studies was systematic development of floating-bioadhesive gastroretentive tablets of cefuroxime axetil employing rational blend of hydrophilic polymers for attaining controlled release drug delivery. As per the QbD-based approach, the patient-centric target product profile and quality attributes of tablet were earmarked, and preliminary studies were conducted for screening the suitability of type of polymers, polymer ratio, granulation technique, and granulation time for formulation of tablets. A face-centered cubic design (FCCD) was employed for optimization of the critical material attributes, i.e., concentration of release controlling polymers, PEO 303 and HPMC K100 LV CR, and evaluating in vitro buoyancy, drug release, and ex vivo mucoadhesion strength. The optimized formulation was embarked upon through numerical optimization, which yield excellent floatation characteristic with drug release control (i.e., T _60%?>?6 h) and bioadhesion strength. Drug-excipient compatibility studies through FTIR and P-XRD revealed the absence of any interaction between the drug and polymers. In vivo evaluation of the gastroretentive characteristics through X-ray imaging and in vivo pharmacokinetic studies in rabbits revealed significant extension in the rate of drug absorption (i.e., T _max, K _a, and MRT) from the optimized tablet formulation as compared to the marketed formulation. Successful establishment of various levels of in vitro/in vivo correlations (IVIVC) substantiated high degree of prognostic ability of in vitro dissolution conditions in predicting the in vivo performance. In a nutshell, the studies demonstrate successful development of the once-a-day gastroretentive formulations of cefuroxime axetil with controlled drug release profile and improved compliance.     

Design and Evaluation of Hydrophilic Matrix System Containing Polyethylene Oxides for the Zero-Order Controlled Delivery of Water-Insoluble Drugs

The aim of this study was to design a polyethylene oxide (PEO) binary hydrophilic matrix controlled system and investigate the most important influence(s) on the in vitro water-insoluble drug release behavior of this controlled system. Direct-compressed PEO binary matrix tablets were obtained from a variety of low viscosity hydrophilic materials as a sustained agent, using anhydrous drugs as a model drug. Water uptake rate, swelling rate, and erosion rate of matrices were investigated for the evaluation of the PEO hydrophilic matrix systems. The effect of the dose, the solubility of water-insoluble drug, and the rheology of polymers on in vitro release were also discussed. Based on the in vitro release kinetics study, three optimized PEO binary matrices were selected for further research. And, these PEO binary matrices had shown the similar release behavior that had been evaluated by the similarity factor f ₂. Further study indicated that they had identical hydration, swelling, and erosion rate. Moreover, rheology study exhibited the similar rheological equation of Herschel–Bulkley and their viscosity was also within the same magnitude. Therefore, viscosity plays the most important role to control drug release compared to other factors in PEO binary matrix system. This research provides fundamental understanding of in vitro drug release of PEO binary hydrophilic matrix tablets and helps pharmaceutical workers to develop a hydrophilic controlled system, which will effectively shorten the process of formulation development by reducing trial-and-error.     

Preparation and <Emphasis Type="Italic">In Vitro</Emphasis>–<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of Sustained-Release Matrix Pellets of Capsaicin to Enhance the Oral Bioavailability

Capsaicin has multiple pharmacological activities including antioxidant, anticancer, and anti-inflammatory activities. However, its clinical application is limited due to its poor aqueous solubility, gastric irritation, and low oral bioavailability. This research was aimed at preparing sustained-release matrix pellets of capsaicin to enhance its oral bioavailability. The pellets comprised of a core of solid-dispersed capsaicin mixed with microcrystalline cellulose (MCC) and hydroxypropyl cellulose (HPMC) and subsequently coating with ethyl cellulose (EC) were obtained by using the technology of extrusion/spheronization. The physicochemical properties of the pellets were evaluated through scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and X-ray diffractometry (XRD). Besides, the in vitro release, in vivo absorption, and in vitro–in vivo correlation were also assessed. More importantly, the relative bioavailability of the sustained-release matrix pellets was studied in fasted rabbits after oral administration using free capsaicin and solid dispersion as references. The oral bioavailability of the matrix pellets and sustained-release matrix pellets of capsaicin was improved approximately 1.98-fold and 5.34-fold, respectively, compared with the free capsaicin. A good level A IVIVC (in vitro–in vivo correlation) was established between the in vitro dissolution and the in vivo absorption of sustained-release matrix pellets. All the results affirmed the remarkable improvement in the oral bioavailability of capsaicin owing to the successful preparation of its sustained-release matrix pellets.     

Pharmacokinetic Evaluation of Improved Oral Bioavailability of Valsartan: Proliposomes <Emphasis Type="Italic">Versus</Emphasis> Self-Nanoemulsifying Drug Delivery System

The objective of this study was to develop proliposomes and self-nanoemulsifying drug delivery system (SNEDDS) for a poorly bioavailable drug, valsartan, and to compare their in vivo pharmacokinetics. Proliposomes were prepared by thin-film hydration method using different lipids such as soy phosphatidylcholine (SPC), hydrogenated soy phosphatidylcholine (HSPC), distearyl phosphatidylcholine (DSPC), dimyristoylphosphatidylcholine (DMPC), and dimyristoyl phosphatidylglycerol sodium (DMPG) and cholesterol in various ratios. SNEDDS formulations were prepared using varying concentrations of capmul MCM, labrafil M 2125, and Tween 80. Both proliposomes and SNEDDS were evaluated for particle size, zeta potential, in vitro drug release, in vitro permeability, and in vivo pharmacokinetics. In vitro drug release was carried out in purified water and 0.1 N HCl using USP type II dissolution apparatus. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA) and everted rat intestinal permeation techniques. Among the formulations, the proliposomes with drug/DMPG/cholesterol in the ratio of 1:1:0.5 and SNEDDS with capmul MCM (16.0% w/w), labrafil M 2125 (64.0% w/w), and Tween 80 (18.0% w/w) showed the desired particle size and zeta potential. Enhanced drug release was observed with proliposomes and SNEDDS as compared to pure valsartan. Valsartan permeability across PAMPA and everted rat intestinal permeation models was significantly higher with proliposomes and SNEDDS. Following single oral administration of proliposomes and SNEDDS, a relative bioavailability of 202.36 and 196.87%, respectively, was achieved compared to pure valsartan suspension. The study results indicated that both proliposomes and SNEDDS formulations are comparable in improving the oral bioavailability of valsartan.     

Lectin-Conjugated Clarithromycin and Acetohydroxamic Acid-Loaded PLGA Nanoparticles: a Novel Approach for Effective Treatment of <Emphasis Type="Italic">H. pylori</Emphasis>

Helicobacter pylori infection remains challenging as it mainly colonized beneath the deep gastric mucosa and adheres to epithelial cells of the stomach. Concanavalin-A (Con-A)-conjugated gastro-retentive poly (lactic-co-glycolic acid) (PLGA) nanoparticles of acetohydroxamic acid (AHA) and clarithromycin (CLR) were prepared and evaluated under in vitro conditions. Solvent evaporation method was employed for preparation of nanoparticles and characterized for particle size distribution, surface morphology, percent drug entrapment, and in vitro drug release in simulated gastric fluid. Optimized nanoparticles were conjugated with Con-A and further characterized for Con-A conjugation efficiency and mucoadhesion and tested for in vitro anti-H. pylori activity. The conjugation with Con-A further sustained the drug release over a period of 8 h when compared to non-conjugated nanoparticles of AHA and CLR. In vitro anti H. pylori study confirmed that Con-A-conjugated nanoparticles containing both drugs, i.e., CLR and AHA, had shown maximum zone of inhibition compared to other formulations. In a nut shell, results suggest that the developed systems could be used for better therapeutic activity against H. pylori infection.     

Formulation and In Vitro,In Vivo Evaluation of Effervescent Floating Sustained-Release Imatinib Mesylate Tablet

Introduction

Imatinib mesylate is an antineoplastic agent which has high absorption in the upper part of the gastrointestinal tract (GIT). Conventional imatinib mesylate (Gleevec) tablets produce rapid and relatively high peak blood levels and requires frequent administration to keep the plasma drug level at an effective range. This might cause side effects, reduced effectiveness and poor therapeutic management. Therefore, floating sustained-release Imatinib tablets were developed to allow the tablets to be released in the upper part of the GIT and overcome the inadequacy of conventional tablets.

Methodology

Floating sustained-release Imatinib mesylate tablets were prepared using the wet granulation method. Tablets were formulated using Hydroxypropyl Methylcellulose (HPMC K4M), with Sodium alginate (SA) and Carbomer 934P (CP) as release-retarding polymers, sodium bicarbonate (NaHCO₃) as the effervescent agent and lactose as a filler. Floating behavior, in vitro drug release, and swelling index studies were conducted. Initial and total drug release duration was compared with a commercial tablet (Gleevec) in 0.1 N HCl (pH 1.2) at 37 ± 0.5°C for 24 hours. Tablets were then evaluated for various physical parameters, including weight variation, thickness, hardness, friability, and drug content. Consequently, 6 months of physical stability studies and in vitro gastro-retentive studies were conducted.

Results and Discussion

Statistical data analysis revealed that tablets containing a composition of 14.67% w/w HPMC K4M, 10.67%, w/w Na alginate, 1.33%, w/w Carbomer 934P and 9.33%, w/w NaHCO₃ produced the most favorable formulation to develop 24-hour sustained-release tablets with optimum floating behavior and satisfactory physicochemical characteristics. Furthermore, in vitro release study revealed that the formulated SR tablet had significantly lower C_max and higher T_max compared to the conventional tablet (Gleevec). Thus, formulated SR tablets preserved persistent concentration of plasma up to 24 hours.

Conclusion

In conclusion, in order to suggest a better drug delivery system with constant favorable release, resulting in optimized absorption and less side effects, formulated CP-HPMC-SA based imatinib mesylate floating sustained-release tablets can be a promising candidate for cancer chemotherapy.     

Particle Size Distribution Equivalency as Novel Predictors for Bioequivalence

The use of particle size distribution (PSD) similarity metrics and the development and incorporation of drug release predictions based on PSD properties into PBPK models for various drug administration routes may provide a holistic approach for evaluating the effect of PSD differences on in vitro drug release and bioavailability of disperse systems. The objectives of this study were to provide a rational approach for evaluating the utility of in vitro PSD comparators for predicting bioequivalence for subcutaneously administered test and reference drug emulsions. Two types of in vitro comparators for test and reference emulsion products were evaluated: PSD characterization comparators (overlap metrics, median, and span ratios) and release profile comparators (f₂ and various fractional time ratios). A subcutaneous-input PBPK disposition model was developed to simulate blood concentration-time profiles of reference and test emulsion products and pharmacokinetic responses (e.g., AUC, C_max, and T_max) were used to determine bioequivalence. A pool of 10,440 pairs of test and reference products was simulated using Monte Carlo experiments. The PSD and release profile comparators were correlated to pass/fail bioequivalence metrics using logistical regression. Based on the use of single in vitro comparators, the f₂ method was the best predictor of bioequivalence prediction. The use of combinations of f₂ and PSD overlap comparators (e.g., OVL or PROB) improved bioequivalence prediction to about 90%. Simulation procedures used in this study demonstrated a process for developing reliable in vitro BE predictors.     

Buccal Drug Delivery of Pravastatin Sodium

The purpose of this study was to develop and optimize formulations of mucoadhesive bilayered buccal tablets of pravastatin sodium using carrageenan gum as the base matrix. The tablets were prepared by direct compression method. Polyvinyl pyrrolidone (PVP) K 30, Pluronic® F 127, and magnesium oxide were used to improve tablet properties. Magnesium stearate, talc, and lactose were used to aid the compression of tablets. The tablets were found to have good appearance, uniform thickness, diameter, weight, pH, and drug content. A 2³ full factorial design was employed to study the effect of independent variables viz. levels of carrageenan gum, Pluronic F 127 and PVP K30, which significantly influenced characteristics like in vitro mucoadhesive strength, in vitro drug release, swelling index, and in vitro residence time. The tablet was coated with an impermeable backing layer of ethyl cellulose to ensure unidirectional drug release. Different penetration enhancers were tried to improve the permeation of pravastatin sodium through buccal mucosa. Formulation containing 1% sodium lauryl sulfate showed good permeation of pravastatin sodium through mucosa. Histopathological studies revealed no buccal mucosal damage. It can be concluded that buccal route can be one of the alternatives available for the administration of pravastatin sodium.     

Novel Polyurethane Matrix Systems Reveal a Particular Sustained Release Behavior Studied by Imaging and Computational Modeling

The aim of the present work was to better understand the drug-release mechanism from sustained release matrices prepared with two new polyurethanes, using a novel in silico formulation tool based on 3-dimensional cellular automata. For this purpose, two polymers and theophylline as model drug were used to prepare binary matrix tablets. Each formulation was simulated in silico, and its release behavior was compared to the experimental drug release profiles. Furthermore, the polymer distributions in the tablets were imaged by scanning electron microscopy (SEM) and the changes produced by the tortuosity were quantified and verified using experimental data. The obtained results showed that the polymers exhibited a surprisingly high ability for controlling drug release at low excipient concentrations (only 10% w/w of excipient controlled the release of drug during almost 8 h). The mesoscopic in silico model helped to reveal how the novel biopolymers were controlling drug release. The mechanism was found to be a special geometrical arrangement of the excipient particles, creating an almost continuous barrier surrounding the drug in a very effective way, comparable to lipid or waxy excipients but with the advantages of a much higher compactability, stability, and absence of excipient polymorphism.     

Design,Characterization, and <Emphasis Type="Italic">In Vivo</Emphasis> Pharmacokinetics of Tacrolimus Proliposomes

The objective of this study was to develop proliposomal formulation for a poorly bioavailable drug, tacrolimus. Proliposomes were prepared by thin film hydration method using different lipids such as hydrogenated soy phosphatidylcholine (HEPC), soy phosphatidylcholine (SPC), distearyl phosphatidylcholine (DSPC), dimyristoylphosphatidylcholine (DMPC), and dimyristoylphosphatidylglycerol sodium (DMPG) and cholesterol in various ratios. Proliposomes were evaluated for particle size, zeta potential, in vitro drug release, in vitro permeability, and in vivo pharmacokinetics. In vitro drug release was carried out in purified water using USP type II dissolution apparatus. In vitro drug permeation was studied using parallel artificial membrane permeation assay (PAMPA) and everted rat intestinal perfusion techniques. In vivo pharmacokinetic studies were conducted in male Sprague-Dawley (SD) rats. Among the different formulations, proliposomes with drug/DSPC/cholesterol in the ratio of 1:2:0.5 demonstrated the desired particle size and zeta potential. Enhanced drug release was observed with proliposomes compared to pure tacrolimus in purified water after 1 h. Tacrolimus permeability across PAMPA and everted rat intestinal perfusion models was significantly higher with proliposomes. The optimized formulation of proliposomes indicated a significant improvement in the rate and absorption of tacrolimus. Following a single oral administration, a relative bioavailability of 193.33% was achieved compared to pure tacrolimus suspension.     

<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation of a PEO-Gellan Gum Semi-Interpenetrating Polymer Network for the Oral Delivery of Sulpiride

In this study, an optimized epichlorohydrin-crosslinked semi-interpenetrating polymer network xerogel matrix system (XePoMas) for the controlled delivery of sulpiride was prepared. The ability of XePoMas to sustain drug release was determined by in vitro and in vivo drug release experiments. Swelling of the xerogel over the 24-h experimental period ranged from 346 to 648%; swelling was observed to increase exponentially over the initial 8 h. In vitro drug release depicted a linear zero order drug release profile with an R ² value of 0.9956. The ability of the fabricated XePoMas to sustain drug release and enhance bioavailability of sulpiride in vivo was investigated by evaluating the plasma drug concentration over 24 h in the large pig model. The optimized XePoMas formulation was shown to increase intestinal absorption of sulpiride to a greater extent than the marketed product in vivo, with a C _max of 830.58 ng/mL after 15 h.     

Early Stage HIV Management and Reduction of Stavudine-Induced Hepatotoxicity in Rats by Experimentally Developed Biodegradable Nanoparticles

The objectives of this research work were to develop optimized nanoparticulate formulations of poly (d,l-lactic-co-glycolic acid) (PLGA) (85:15) with an anti-AIDS drug stavudine and to evaluate their in-vitro uptake by the macrophages and hepatotoxicity in-vivo. Nanoparticles were prepared by nanoprecipitation method based on a factorial design with varying parameters such as the amounts of polymer and stabilizer used. Physicochemical characterizations such as drug–excipient interaction, surface morphology, particle size, and zeta potential measurements were carried out. The best formulation was selected and tagged with fluorescein isothiocyanate (FITC) for cellular uptake study of the formulation. In-vitro uptake of nanoparticles by macrophages was carried out. Formulation-induced hepatotoxicity was assessed by analyzing some serum hepatotoxic parameters and hepatic histology following 10-day treatment in comparison with the free drug. Nanoparticles exhibited smooth surface with particle size 84–238 nm, high entrapment efficiency (approx 85%), and negative surface charge. Formulations showed a sustained drug release pattern over the study period. In-vitro uptake study by macrophages exhibited a time-dependent profile. In-vivo studies on rats showed improvement in the serum parameters and maintenance of the integrity of the hepatic architecture indicating decreased hepatotoxicity with the formulations as compared to the free drug. The experimental results showed a positive outcome in the development of antiretroviral drug carrier exhibiting sustained drug release, macrophage-targeted delivery characteristics, and having reduced hepatoxicity. This could be beneficial for the management of early stage of HIV infection besides reducing the drug load for effective treatment, thereby offering an attractive option in AIDS therapy.     

Effects of Formulation Variables on the Particle Size and Drug Encapsulation of Imatinib-Loaded Solid Lipid Nanoparticles

Imatinib (IMT), an anticancer agent, inhibits receptor tyrosine kinases and is characterized by poor aqueous solubility, extensive first-pass metabolism, and rapid clearance. The aims of the current study are to prepare imatinib-loaded solid lipid nanoparticles (IMT-SLN) and study the effects of associated formulation variables on particle size and drug encapsulation on IMT-SLN using an experimental design. IMT-SLN was optimized by use of a “combo” approach involving Plackett-Burman design (PBD) and Box-Behnken design (BBD). PBD screening resulted in the determination of organic-to-aqueous phase ratio (O/A), drug-to-lipid ratio (D/L), and amount of Tween® 20 (Tw20) as three significant variables for particle size (S _z), drug loading (DL), and encapsulation efficiency (EE) of IMT-SLN, which were used for optimization by BBD, yielding an optimized criteria of O/A?=?0.04, D/L?=?0.03, and Tw20?=?2.50%?w/v. The optimized IMT-SLN exhibited monodispersed particles with a size range of 69.0?±?0.9 nm, ζ-potential of ?24.2?±?1.2 mV, and DL and EE of 2.9?±?0.1 and 97.6?±?0.1%?w/w, respectively. Results of in vitro release study showed a sustained release pattern, presumably by diffusion and erosion, with a higher release rate at pH 5.0, compared to pH 7.4. In conclusion, use of the combo experimental design approach enabled clear understanding of the effects of various formulation variables on IMT-SLN and aided in the preparation of a system which exhibited desirable physicochemical and release characteristics.     

Anticancer Efficacy of Self-Nanoemulsifying Drug Delivery System of Sunitinib Malate

Sunitinib malate (SM) is reported as a weakly soluble drug in water due to its poor dissolution rate and oral bioavailability. Hence, in the current study, various “self-nanoemulsifying drug delivery systems (SNEDDS)” of SM were prepared, characterized and evaluated for the enhancement of its in vitro dissolution rate and anticancer efficacy. On the basis of solubilization potential of SM in various excipients, “Lauroglycol-90 (oil), Triton-X100 (surfactant) and Transcutol-P (cosurfactant)” were selected for the preparation of SM SNEDDS. SM-loaded SNEDDS were developed by spontaneous emulsification method, characterized and evaluated for “thermodynamic stability, self-nanoemulsification efficiency, droplet size, polydispersity index (PDI), zeta potential (ZP), surface morphology, refractive index (RI), the percent of transmittance (% T) and drug release profile.” In vitro dissolution rate of SM was significantly enhanced from an optimized SNEDDS in comparison with SM suspension. The optimized SNEDDS of SM with droplet size of 42.3 nm, PDI value of 0.174, ZP value of ?36.4 mV, RI value of 1.339, % T value of 97.3%, and drug release profile of 95.4% (after 24 h via dialysis membrane) was selected for in vitro anticancer efficacy in human colon cancer cells (HT-29) by MTT assay. MTT assay indicated significant anticancer efficacy of optimized SM SNEDDS against HT-29 cells in comparison with free SM. The results of this study showed the great potential of SNEDDS in the enhancement of in vitro dissolution rate and anticancer efficacy of poorly soluble drug such as SM.     

Galactose-Containing Polymer-DOX Conjugates for Targeting Drug Delivery

A novel multifunctional drug delivery system was fabricated by conjugating galactose-based polymer, methoxy-poly(ethylene glycol)-block-poly(6-O-methacryloyl-D-galactopyranose) (mPEG-b-PMAGP) with doxorubicin (DOX) via an acid-labile carbamate linkage. The mPEG-b-PMAGP-co-DOX nanoparticles were spherical in shape, and the diameter determined by dynamic light scattering (DLS) was 54.84?±?0.58 nm, larger than that characterized by transmission electron microscopy (TEM). The in vitro drug release profiles were studied, and the release of DOX from the nanoparticles was pH-responsive. The cellular uptake behavior of free-DOX and mPEG-b-PMAGP-co-DOX nanoparticles by asialoglycoprotein (ASGP) receptor-positive cancer cell line (HepG2) and ASGP receptor-negative cancer cell lines (MCF-7 and A549 cells) was evaluated by confocal laser scanning microscopy (CLSM) and flow cytometry (FCM), respectively. The mPEG-b-PMAGP-co-DOX nanoparticles which contain galactose functional groups exhibited higher cellular uptake behavior via ASGP receptor-mediated endocytosis in HepG2 cells than in other two cancer cells. The in vitro cytotoxicity assay manifested that the mPEG-b-PMAGP-co-DOX nanoparticles exhibited higher anticancer efficacy against HepG2 cells than MCF-7 cells. These results indicated that the multifunctional mPEG-b-PMAGP-co-DOX nanoparticles possessing pH-responsible and hepatoma-targeting function have great potential to be used as a targeting drug delivery system for hepatoma therapy.     

Transfersomal Nanoparticles for Enhanced Transdermal Delivery of Clindamycin

The aim of this work was to study the potential of delivering clindamycin phosphate, as an efficient antibiotic drug, into a more absorbed, elastic ultradeformable form, transfersomes (TRSs). These vesicles showed an enhanced penetration through ex vivo permeation characters. TRSs were prepared using thin-film hydration method. Furthermore, they were evaluated for their entrapment efficiency, size, zeta potential, and morphology. Also, the prepared TRSs were converted into suitable gel formulation using carbopol 934 and were evaluated for their gel characteristics like pH, viscosity, spreadability, homogeneity, skin irritation, in vitro release, stability, and ex vivo permeation studies in rats. TRSs were efficiently formulated in a stable bilayer vesicle structure. Furthermore, clindamycin phosphate showed higher entrapment efficiency within the TRSs reaching about 93.3%?±?0.8 and has a uniform particle size. Moreover, the TRSs surface had a high negative charge which indicated the stability of the produced vesicles and resistance of aggregation. Clindamycin phosphate showed a significantly higher in vitro release (p?<?0.05; ANOVA/Tukey) compared with the control carbopol gel. Furthermore, the transfersomal gel showed a significantly higher (p?<?0.05; ANOVA/Tukey) cumulative amount of drug permeation and flux than both the transfersomal suspension and the control carbopol gel. In conclusion, the produced results suggest that TRS-loaded clindamycin are promising carriers for enhanced dermal delivery of clindamycin phosphate.     

Physiological Considerations and <Emphasis Type="Italic">In Vitro</Emphasis> Strategies for Evaluating the Influence of Food on Drug Release from Extended-Release Formulations

Food effects on oral drug bioavailability are a consequence of the complex interplay between drug, formulation and human gastrointestinal (GI) physiology. Accordingly, the prediction of the direction and the extent of food effects is often difficult. With respect to novel formulations, biorelevant in vitro methods can be extremely powerful tools to simulate the effect of food-induced changes on the physiological GI conditions on drug release and absorption. However, the selection of suitable in vitro methods should be based on a thorough understanding not only of human GI physiology but also of the drug and formulation properties. This review focuses on in vitro methods that can be applied to evaluate the effect of food intake on drug release from extended release (ER) products during preclinical formulation development. With the aid of different examples, it will be demonstrated that the combined and targeted use of various biorelevant in vitro methods can be extremely useful for understanding drug release from ER products in the fed state and to be able to forecast formulation-associated risks such as dose dumping in early stages of formulation development.     

Development of a Discriminative <Emphasis Type="Italic">In Vitro</Emphasis> Release Test for Rivastigmine Transdermal Patches Using Pharmacopeial Apparatuses: USP 5 and USP 6

The aim of this study was to develop and validate a discriminating in vitro release test to evaluate rivastigmine transdermal patches. The Exelon® Patch was chosen as a model transdermal product. The studies of in vitro release were designed to determine the impact of the official apparatus chosen (USP apparatus 5 and USP apparatus 6), the rotation speed, and the dissolution medium characteristics on the rivastigmine release profile from transdermal patches. Patches with different drug release profiles were tested in order to evaluate the discriminating power of the in vitro release test developed and validated. Variables such as the apparatus type, the dissolution medium, and the rotation speed have a significant influence on the drug release characteristics from a transdermal patch. The in vitro release methodologies using the USP apparatus 5 at 50 rpm and USP apparatus 6 at 25 rpm using the medium phosphate-buffered saline pH 7.4 were considered discriminative and adequate to characterize the rivastigmine (RV) release from a commercial transdermal patch, Exelon® Patch.     

Development of a Prolonged-Release Pramipexole Transdermal Patch: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The current study aimed to develop a prolonged-release pramipexole (PPX) transdermal patch for the treatment of Parkinson’s disease. Permeation parameters of PPX were investigated using human cadaver skin. Pramipexole patches were prepared using DURO-TAK^® pressure-sensitive-adhesive (PSA) and evaluated for drug stability, drug loading, in vitro drug release, and in vitro permeation through mouse skin. The results indicated that blends of DURO-TAK^® 87-2852 and DURO-TAK^® 87-2510 were suitable for creating a prolonged-release PPX patch due to their advantages in drug release, drug loading, and stability. The final formulation consisted of 87-2852/87-2510 (70:30), 10% PG, and 15% PPX and showed a cumulative permeation amount of 1497.19?±?102.90 μg/cm² with a continuous flux over 6.0 μg/(cm²·h) across human cadaver skin for 7 days. In vivo studies in rats indicated that PPX patch produced a significantly longer (p?<?0.001) half-life (t _1/2, 75.16?±?17.37 h) and mean residence time (MRT, 135.89?±?24.12 h) relative to oral tablets (Sifrol^®) and had a relative bioavailability of 51.64?±?21.32%. Therefore, this study demonstrated the feasibility of developing a prolonged-release PPX patch, which proposed the potential to serve as an alternate to conventional oral tablets and may therefore improve patient compliance.