Distinct colchicine binding kinetics of bovine brain tubulin lacking the type III isotype of beta-tubulin

In mammalian brain, beta-tubulin occurs as a mixture of four isotypes designated as types I, II, III, and IV. It has been speculated in recent years that the different tubulin isotypes may confer functional diversity to microtubules. In an effort to investigate whether different tubulin isotypes differ in their functional properties we have studied the colchicine binding kinetics of bovine brain tubulin upon removal of the beta III isotype. We found that the removal of the beta III isotype alters the binding kinetics from biphasic to monophasic with the disappearance of the slow phase. The kinetics become biphasic with the reappearance of the slow phase when the beta III-depleted tubulin was mixed with the beta III fraction eluted from the affinity column with 0.5 M NaCl. The analysis of the kinetic data reveals that the tubulin dimers containing beta III bind colchicine at an on-rate constant of 35 M-1 s-1 while those lacking beta III bind at 182 M-1 s-1. Our results strongly suggest that the beta-subunit plays a very important role in the interaction of tubulin with colchicine.     

A monoclonal antibody against the type II isotype of beta-tubulin. Preparation of isotypically altered tubulin

Mammalian brain tubulin consists of several isotypes of alpha and beta subunits that separate on polyacrylamide gels into three electrophoretic classes, designated alpha, beta 1, and beta 2. It has not been possible hitherto to resolve the different isotypes in a functional form. To this end, we have now isolated a monoclonal antibody, using as an immunogen a chemically synthesized peptide corresponding to the carboxyl-terminal sequence of the major tubulin isotype (type II) found in the beta 1-tubulin electrophoretic fraction. The antibody binds to beta 1 but not to alpha or beta 2. When pure tubulin from bovine brain is passed through an immunoaffinity column made from the anti-type II antibody, the tubulin that elutes in the unbound fraction is enriched greatly for the beta 2 electrophoretic variant. The tubulin that binds to the column appears to contain only alpha and beta 1, not beta 2. When these tubulin fractions are characterized by immunoblotting using the anti-type II antibody, the antibody binds only to the beta 1 band in the bound fraction, not to the beta 1 band in the unbound fraction. Using polyclonal antibodies generated against the carboxyl-termini of types I, III, and IV, we demonstrate that the beta 1 electrophoretic species is comprised of isotypes I, II, and IV, whereas the beta 2 variant is comprised exclusively of type III beta-tubulin. Further, we calculate that beta-tubulin in purified bovine brain tubulin is comprised of 3% type I, 58% type II, 25% type III, and 13% type IV tubulins.     

Erythrocyte microtubule assembly in vitro. Determination of the effects of erythrocyte tau, tubulin isoforms, and tubulin oligomers on erythrocyte tubulin assembly, and comparison with brain microtubule assembly

Two tubulin variants, isolated from chicken brain and erythrocytes and known to have different peptide maps and electrophoretic properties, are demonstrated to exhibit different assembly properties in vitro: 1) erythrocyte tubulin assembles with greater efficiency (lower critical concentration, greater elongation rate) but exhibits a lower nucleation rate than brain tubulin, and 2) erythrocyte tubulin readily forms oligomers whose presence significantly retards the rate of elongation, suggesting that tubulin oligomers may also be important for determining the rate of assembly and the length of microtubules in erythrocytes. Erythrocyte tubulin isolated by cycles of in vitro assembly-disassembly is also demonstrated to contain a 67-kDa tau factor that greatly enhances microtubule nucleation but has little effect on elongation rates or critical concentration. Immunofluorescence microscopy with tau antibody indicates that tau is specifically associated with marginal band microtubules, suggesting that it may be important for determining microtubule function in vivo.     

Preparation of a monoclonal antibody specific for the class IV isotype of beta-tubulin. Purification and assembly of alpha beta II, alpha beta III, and alpha beta IV tubulin dimers from bovine brain.

Tubulin, the 100-kDa subunit protein of microtubules, is a heterodimer of two 50-kDa subunits, alpha and beta. Both alpha and beta subunits exist as numerous isotypic forms. There are four isotypes of beta-tubulin in bovine brain tubulin preparations; their designations and relative abundances in these preparations are as follows: beta I, 3%; beta II, 58%; beta III, 25%; and beta IV, 13%. We have previously reported the preparation of monoclonal antibodies specific for beta II and beta III (Banerjee, A., Roach, M. C., Wall, K. A., Lopata, M. A., Cleveland, D. W., and Luduena, R. F. (1988) J. Biol. Chem. 263, 3029-3034; Banerjee, A., Roach, M. C., Trcka, P., and Luduena, R. F. (1990) J. Biol. Chem. 265, 1794-1799). We here report the preparation of a monoclonal antibody specific for beta IV. By using this antibody together with those specific for beta II and beta III, we have prepared isotypically pure tubulin dimers with the composition alpha beta II, alpha beta III, and alpha beta IV. We have found that, in the presence of microtubule-associated proteins, all three dimers assemble into microtubules considerably faster and to a greater extent than does unfractionated tubulin. More assembly was noted with alpha beta II and alpha beta III than with alpha beta IV. When assembly is measured in the presence of taxol (10 microM), little difference is seen among the isotypically purified dimers or between them and unfractionated tubulin. These results indicate that the assembly properties of a tubulin preparation are influenced by its isotypic composition and raise the possibility that the structural differences among tubulin isotypes may have functional significance.     

Enthalpy changes in microtubule assembly from pure tubulin

The enthalpy changes that occur in the self-assembly of tubulin into microtubules were examined by adiabatic differential heat capacity microcalorimetry and by isothermal batch microcalorimetry. Tubulin solutions at concentrations between 7 and 17 mg/mL were heated from 0 to 40 degrees C at heating rates of 1 or 2 deg/min in pH 6.8 or 7.0 assembly buffers containing 20 mM MES, 100 mM glutamic acid, 5 mM MgCl2, 3.4 M glycerol, and either 0.5 mM GMP-PCP or 1 mM GTP. The assembly reaction in the presence of GTP was characterized by a complex heat-uptake pattern consisting of a broad endotherm with a sharper exotherm superimposed on it, similar to assembly in a GTP phosphate buffer [Hinz, H.-J., Gorbunoff, M.J., Price, B., & Timasheff, S.N. (1979) Biochemistry 18,3084]. Replacement of GTP by the nonhydrolyzable analogue resulted in a pattern typical for an endothermic reaction only. These results have permitted the assignment of the endothermic process to microtubule assembly and of the exothermic process to the resultant GTP hydrolysis. In these studies equilibration was found to be slow, several hours of cooling being required for the system to return to its original state. Turbidity scans also revealed hysteresis between consecutive scans and a displacement of the depolymerization transition midpoint to a lower temperature than that of assembly. The disassembly of microtubules was examined in batch calorimetry experiments in pH 7.0 phosphate, 1 mM GTP, 16 mM MgCl2, and 3.4 M glycerol, in which tubulin assembled into microtubules was diluted to below the critical concentration.(ABSTRACT TRUNCATED AT 250 WORDS)     

Possible regulation of the in vitro assembly of bovine brain tubulin by the bovine thioredoxin system

Microtubule assembly in vitro and in vivo is highly sensitive to a variety of sulfhydryl-reactive reagents, raising the question of the possible existence of a physiological sulfhydryl-mediated system for regulating microtubule assembly. However, the specific reagents which have previously been used to inhibit microtubule assembly in vitro are either nonphysiological or, if physiological, effective only at concentrations much higher than their physiological ones. Because of reports of association in vivo between microtubules and the sulfhydryl-reactive proteins thioredoxin and thioredoxin reductase, we decided to examine the interaction in vitro between microtubules and the thioredoxin system, comprising thioredoxin, thioredoxin reductase and NADPH. At pH 6.8, both the mammalian and the Escherichia coli thioredoxin systems inhibited microtubule assembly by 4-35% (19 +/- 9%) by reducing one intra-subunit disulfide bond in the tubulin dimer. The thioredoxin-reducible disulfide of the tubulin dimer remains protected from thioredoxin in the assembled microtubules. Thioredoxin or thioredoxin reductase alone, or together in the absence of NADPH, were incapable of either reducing tubulin or inhibiting microtubule assembly. Microtubules formed from reduced tubulin were found to be stable and morphologically identical to those obtained from native tubulin dimers. Since the components of the thioredoxin system were used at concentrations similar to their physiological ones, our results suggest a potential role of the thioredoxin system in regulation of microtubule assembly in vivo.     

A quasi-elastic laser light scattering study of tubulin and microtubule protein from bovine brain

Quasi-elastic light scattering has been used to characterize the oligomeric properties of solutions of glycerol-cycled bovine microtubule protein, and the properties of the 30 S oligomeric species and 6 S tubulin heterodimer prepared by gel filtration on Sepharose 6B. It is shown that in dimer preparations, as little as 0.04% by number of 30 S rings would account for the difference between an observed mean diffusion coefficient D_{20, W} = 3.1 × 10^?7 cm² s^?1 and the value of D_{20, W} = 5.1 × 10^?7 cm² s^?1 calculated for tubulin dimer of M_rel 100,000. The 30 S ring has an observed diffusion coefficient of D_{20, W} = 0.49 × 10^?7 cm² s^?1. These values are not changed significantly by the presence of 4 m-glycerol, indicating the persistence of 6 S and 30 S forms for dimer and ring, respectively.Mixtures of ring and dimer components of this preparation behave as a non-interacting two-component system, indicating the absence of substantial re-equilibration between the species at 5 °C and pH 6.5.The effect of salt on ring and microtubule protein samples indicates partial dissociation, consistent with the formation of additional intermediate oligomeric forms.In quasi-elastic light scattering measurements adapted to kinetic studies, changes in the oligomeric composition of microtubule protein are detected in the early stages of the reversible assembly process at pH 6.5. A 25% decrease in scattered light intensity, without significant change in mean diffusion coefficient, indicates the lability of the ring oligomeric structures, which undergo partial transformation to alternative oligomeric species under these assembly conditions.     

A beta-tubulin leucine cluster involved in microtubule assembly and paclitaxel resistance.

Analysis of beta-tubulin alleles from nine paclitaxel-resistant Chinese hamster ovary cell lines revealed an unexpected cluster of mutations affecting Leu-215, Leu-217, and Leu-228. Six of the mutant alleles encode a His, Arg, or Phe substitution at Leu-215; another mutant allele has an Arg substitution at Leu-217; and the final two mutant alleles have substitutions of His or Phe at Leu-228. Using plasmids that allow tetracycline regulated expression, the L215H, L217R, and L228F mutations were introduced into a hemagglutinin antigen-tagged beta-tubulin cDNA and transfected into wild-type Chinese hamster ovary cells. In all three cases, low to moderate expression of the transfected mutant gene conferred paclitaxel resistance. Higher levels of expression caused disruption of microtubule assembly, cell cycle arrest at mitosis, and failure to proliferate. Consistent with reduced microtubule stability, cells expressing mutant hemagglutinin beta-tubulin had fewer acetylated microtubules than nonexpressing cells in the same population. These data, together with previous studies showing that the paclitaxel-resistant mutant cell lines have less stable microtubules, indicate that the leucine cluster represents an important structural motif for microtubule assembly.     

Copolymerization of two distinct tubulin isotypes during microtubule assembly in vitro

Cells contain multiple tubulin isotypes that are the products of different genes and posttranslational modifications. It has been proposed that tubulin isotypes become segregated into different classes of microtubules each adapted to specific activities and functions. To determine if mixtures of tubulin isotypes segregate into different classes of polymers in vitro, we used immunoelectron microscopy to examine the composition of microtubule copolymers that assembled from mixtures of purified tubulin subunits from chicken brain and erythrocytes, each of which has been shown to exhibit distinct assembly properties in vitro. We observed that (a) the two isotypes coassemble rapidly and efficiently despite the fact that each isotype exhibits its own unique biochemical and assembly properties; (b) at low monomer concentrations the ratio of tubulin isotypes changes along the lengths of elongating copolymers resulting in gradients in immuno-gold labeling; (c) two distinct classes of copolymers each containing a distinct ratio of isotypes assemble simultaneously in the same subunit mixture; and (d) subunits and polymers of different isotypes associate nearly equally well with each other, there being only a slight bias favoring interactions among subunits and polymers of the same isotype. The observations agree with previous studies on the homogeneous distribution of multiple isotypes within cells and suggest that if segregation of isotypes does occur in vivo, it is most likely directed by cell-specific microtubule-associated proteins (MAPs) or specialized intracellular conditions.     

Detection of disulfide bonds in bovine brain tubulin and their role in protein folding and microtubule assembly in vitro: a novel disulfide detection approach

Cysteine residues in tubulin are actively involved in regulating ligand interactions and microtubule formation both in vivo and in vitro. These cysteine residues are sensitive reporters in determining the conformation of tubulin. Although some of the cysteines are critical in modulating drug binding and microtubule assembly, it is not clear how many of these normally exist as disulfides. The controversy regarding the disulfide bonds led us to develop a disulfide detection assay to reexamine the presence of the disulfide linkages in purified alphabeta tubulin and explore their possible biological functions in vitro. The accessible cysteine residues in alphabeta tubulin were alkylated with an excess of iodoacetamide to prevent artifactual generation of disulfide linkages in tubulin. After removal of excess iodoacetamide, tubulin was unfolded in 8 M urea. Half of the unfolded tubulin was treated with dithiothreitol to reduce any disulfide bonds present. The aliquots were then treated with iodo[(14)C]acetamide and the incorporation of radioactivity was measured. We also used the same approach to detect the disulfide linkages in the tubulin in a whole-cell extract. We found in both cases that the samples which were not treated with dithiothreitol had little or no incorporation of iodo[(14)C]acetamide, while the others that were treated with dithiothreitol had significant amounts of (14)C incorporation into tubulin. Moreover, the reduction of the disulfide linkages in tubulin resulted in inhibition of microtubule assembly (29-54%) and markedly affected refolding of the tubulin from both an intermediate and a completely unfolded state. All these data therefore suggest that tubulin has intrachain disulfide bonds in the alpha- and beta-subunits and that these disulfides assist in correct refolding of tubulin from the intermediate unfolded state or help to recover the hydrophobic domains from the completely unfolded state. These disulfides also regulate microtubule assembly and the stability of tubulin in vitro. Our results suggest that tubulin disulfides may play a role in tubulin folding and that thiol-disulfide exchange in tubulin could be a key regulator in microtubule assembly and dynamics of tubulin in vivo.     

Griseofulvin: Association with tubulin and inhibition of in vitro microtubule assembly

Griseofulvin—shown previously to disrupt the mitotic apparatus $\text{in vivo}$—inhibited the $\text{in vitro}$ microtubule assembly reaction completely at 8 × 10^?4M griseofulvin. In a gel filtration assay, randomly tritiated griseofulvin associated stoichiometrically with purified tubulin, as determined by chromatography on Sephadex G-25. No detectable drug binding was observed when bovine serum albumin was used as a control in an identical column assay. Both gel filtration chromatography and a kinetic analysis of the inhibition of assembly by griseofulvin suggest that the drug interacts directly and stoichimetrically with the tubulin dimer, and that the interaction is both rapid and independent of temperature.     

Enhanced microtubule binding and tubulin assembly properties of conformationally constrained paclitaxel derivatives

Microtubule binding and tubulin assembly promotion by a series of conformationally restricted paclitaxel (PTX) derivatives was investigated. In these derivatives, the C-4 acetate of the taxane is tethered to the C-3' phenyl at ortho and meta positions with different length linkers. The apparent affinity of these derivatives for GMPCPP-stabilized microtubules was assessed by a competition assay, and their influence on microtubule polymerization was evaluated by measuring the critical concentration of GDP-tubulin in the presence of the respective molecule. In general, taxane derivatives with higher apparent affinity for microtubules induced tubulin assembly more efficiently. Among the derivatives, molecules with the shortest tether display the strongest affinity for microtubules. These derivatives exhibited enhanced microtubule stabilization properties and efficiently induced GDP-tubulin assembly into microtubules at low temperature of 12 degrees C and in the absence of Mg2+ ions in 0.1 M PIPES. Based on molecular dynamics simulations, we propose that the enhanced ability to assemble microtubules by these taxane derivatives is linked to their ability to effectively shape the conformation of the M-loop of tubulin for cross-protofilament interaction.     

Identification of tubulin isoforms in the plasmodium of Physarum polycephalum by in vitro microtubule assembly

The tubulins of the plasmodium of Physarum polycephalum have been identified by in vitro microtubule assembly from partially purified extracts of asynchronous microplasmodia and late G2 macroplasmodia. The plasmodial tubulin group comprised of 2 alpha tubulins (app. m.w. 51000 daltons) and 2 beta tubulins (app. m.w. 58000 daltons and 55000 daltons) and appeared to be identical with a group of polypeptides which are synthesized periodically in late G2. Two of the plasmodial tubulin subunits (one alpha and one beta) were identical to the Physarum amoebal tubulin alpha and beta subunits as characterised by 2D gel positions.     

Human chromosomes and centrioles as nucleating sites for the in vitro assembly of microtubules from bovine brain tubulin

Treatment of HeLa cells with Colcemid at concentrations of 0.06-0.10 mug/ml leads to irreversible arrest in mitosis. Colcemid-arrested cells contained few microtubules, and many kinetochores and centrioles were free of microtubule association. When these cells were exposed to microtubule reassembly buffer containing Triton X-100 and bovine brain tubulin at 37 degrees C, numerous microtubules were reassembled at all kinetochores of metaphase chromosomes and in association with centriole pairs. When bovine brain tubulin was eliminated from the reassembly system, microtubules failed to assemble at these sites. Similarly, when EGTA was eliminated from the reassembly system, microtubules failed to polymerize. These results are consistent with other investigations of in vitro microtubule assembly and indicate that HeLa chromosomes and centrioles can serve as nucleating sites for the assembly of microtubules from brain tubulin. Both chromosomes and centrioles became displaced from their C-metaphase configurations during tubulin reassembly, indicating that their movements were a direct result of microtubule formation. Although both kinetochore- and centriole- associated microtubules were assembled and movement occurred, we did not observe direct extension of microtubules from kinetochores to centrioles. This system should prove useful for experimental studies of spindle microtubule formation and chromosome movement in mammalian cells.     

Class II tubulin, the major brain beta tubulin isotype is polyglutamylated on glutamic acid residue 435.

Protein sequencing shows that porcine brain tubulin retains the N-terminal sequences of alpha and beta tubulin after a mild treatment with subtilisin. C-terminal peptides released by subtilisin were purified and characterized by automated Edman degradation and mass spectrometry. We confirm the polyglutamylation of alpha tubulin on glutamic acid residue 445 reported by others and show in addition that class II beta tubulin, the major beta tubulin isotype of adult brain, is also polyglutamylated. The substitution is restricted to glutamic acid residue 435. Thus all major tubulin isotypes of adult brain are subjected to polyglutamylation.