The genus Amycolatopsis: Indigenous plasmids, cloning vectors and gene transfer systems

The genus Amycolatopsis is a member of the phylogenetic group nocardioform actinomycetes. Most of the members of the genus Amycolatopsis are known to produce antibiotics. Additionally, members of this genus have been reported to metabolize aromatic compounds as the sole sources of carbon and energy. Development of genetic manipulation in Amycolatopsis has progressed slowly due to paucity of genetic tools and methods. The occurrence of indigenous plasmids in different species of Amycolatopsis is not very common. Till date, only three indigenous plasmids viz., pMEA100, pMEA300 and pA387 have been reported in Amycolatopsis species. Various vectors based on the indigenous plasmids, pMEA100, pMEA300 and pA387, have been constructed. These vectors have proved useful for molecular genetics studies of actinomycetes. Molecular genetic work with Amycolatopsis strains is not easy, since transformation methods have to be developed, or at least optimized, for each particular strain. Nonetheless, methods for efficient transformation (polyethyleneglycol (PEG) induced protoplast transformation, transformation by electroporation and direct transformation) have been developed and used successfully for the introduction of DNA into several Amycolatopsis species. The construction of plasmid cloning vectors and the development of gene transfer systems has opened up possibilities for studying the molecular genetics of these bacteria.     

Transformation of pBR322-Derived Plasmids in Phytopathogenic Pseudomonas avenae and Enhanced Transformation in Its Proline-Auxotrophic Mutant

Efficient transformation of pBR322 and its derived plasmids, which have been widely used as cloning vectors in Escherichia coli, was observed in Pseudomonas avenae (K1), the pathogen of leaf blight disease in cereals. Moreover, there was a 10- to 50-fold transformation efficiency (1.3–3.0 × 10⁶/μg DNA) in the proline-auxotrophic mutant (Pr47), whose virulence to rice seedlings decreased. Similar enhancement of the frequency of transfer by mobilization of RSF1010, a broad host range plasmid, was observed in the recipient Pr47 strain in mating with donor Pseudomonas syringae. The plasmids harbored in these strains were maintained very stably after subcultures. Thus, a highly efficient transformation system with pBR322-derived plasmids used as a vector and Pseudomonas as a host bacterium was developed. Received: 13 July 1996 / Accepted: 26 August 1996     

Transformation of Mycoplasma capricolum and Examination of DNA Restriction Modification in M. capricolum and Mycoplasma mycoides subsp. mycoides

Plasmids pIKΔ and pIKΔ-erm have recently been developed as mycoplasmal cloning vectors. In this report, we demonstrate that these plasmids can replicate in Mycoplasma capricolum, a mycoplasmal species for which transformation had not previously been characterized. Both plasmids are stably maintained at a higher copy number than in their parental species, Mycoplasma mycoides subsp. mycoides. We have also examined the possibility of one or more restriction-modification systems affecting transformation frequencies in both species.     

Actinomycete integrative and conjugative elements

This paper reviews current knowledge on actinomycete integrative and conjugative elements (AICEs). The best characterised AICEs, pSAM2 of Streptomyces ambofaciens (10.9 kb), SLP1 (17.3 kb) of Streptomyces coelicolor and pMEA300 of Amycolatopsis methanolica (13.3 kb), are present as integrative elements in specific tRNA genes, and are capable of conjugative transfer. These AICEs have a highly conserved structural organisation, with functional modules for excision/integration, replication, conjugative transfer, and regulation. Recently, it has been shown that pMEA300 and the related elements pMEA100 of Amycolatopsis mediterranei and pSE211 of Saccharopolyspora erythraea form a novel group of AICEs, the pMEA-elements, based on the unique characteristics of their replication initiator protein RepAM. Evaluation of a large collection of Amycolatopsis isolates has allowed identification of multiple pMEA-like elements. Our data show that, as AICEs, they mainly coevolved with their natural host in an integrated form, rather than being dispersed via horizontal gene transfer. The pMEA-like elements could be separated into two distinct populations from different geographical origins. One group was most closely related to pMEA300 and was found in isolates from Australia and Asia and pMEA100-related sequences were present in European isolates. Genome sequence data have enormously contributed to the recent insight that AICEs are present in many actinomycete genera. The sequence data also provide more insight into their evolutionary relationships, revealing their modular composition and their likely combined descent from bacterial plasmids and bacteriophages. Evidence is accumulating that AICEs act as modulators of host genome diversity and are also involved in the acquisition of secondary metabolite clusters and foreign DNA via horizontal gene transfer. Although still speculative, these AICEs may play a role in the spread of antibiotic resistance factors into pathogenic bacteria. The novel insights on AICE characteristics presented in this review may be used for the effective construction of new vectors that allows us to engineer and optimise strains for the production of commercially and medically interesting secondary metabolites, and bioactive proteins.     

<Emphasis Type="Italic">Bacillus megaterium</Emphasis>—from simple soil bacterium to industrial protein production host

Bacillus megaterium has been industrially employed for more than 50 years, as it possesses some very useful and unusual enzymes and a high capacity for the production of exoenzymes. It is also a desirable cloning host for the production of intact proteins, as it does not possess external alkaline proteases and can stably maintain a variety of plasmid vectors. Genetic tools for this species include transducing phages and several hundred mutants covering the processes of biosynthesis, catabolism, division, sporulation, germination, antibiotic resistance, and recombination. The seven plasmids of B. megaterium strain QM B1551 contain several unusual metabolic genes that may be useful in bioremediation. Recently, several recombinant shuttle vectors carrying different strong inducible promoters and various combinations of affinity tags for simple protein purification have been constructed. Leader sequences-mediated export of affinity-tagged proteins into the growth medium was made possible. These plasmids are commercially available. For a broader application of B. megaterium in industry, sporulation and protease-deficient as well as UV-sensitive mutants were constructed. The genome sequence of two different strains, plasmidless DSM319 and QM B1551 carrying seven natural plasmids, is now available. These sequences allow for a systems biotechnology optimization of the production host B. megaterium. Altogether, a “toolbox” of hundreds of genetically characterized strains, genetic methods, vectors, hosts, and genomic sequences make B. megaterium an ideal organism for industrial, environmental, and experimental applications.     

A plasmid sequence from Rhizobium leguminosarum 300 contains homology to sequences near the octopine TL-DNA right border

Summary The DNA sequence from a Rhizobium leguminosarum 300 (RL300) plasmid that contains homology to the T_c-DNA of Agrobacterium tumefaciens is described. The RL300 sequence has 78% homology to a 359 bp sequence in the T_c-DNA of pTi15955. The RL300 homology starts approximately 100 bp from the 24 bp border sequence of the T_L-DNA and ends approximately 3 bp from an IS66 homolog in the T_c-DNA. An unusual feature of the RL300 homology is the presence of 81 bp direct repeats with T_c-DNA homology, separated by 201 bp. One end of each direct repeat has a 12 bp palindrome. Four cloned sequences of RL300 with homology to the T DNA region were hybridized to plasmid lysates of RL300 derivatives to determine the source of each plasmid. The sequenced homolog, originally on pRH228, was isolated from pRL7JI; the other 3 homologs were isolated from the transmissable plasmids pRL7JI (pRH235) and pRL8JI (pRH235 and pRH236).     

Isolation of the replication DNA region from a Rhizobium plasmid and examination of its potential as a replicon for Rhizobiaceae cloning vectors

The DNA region essential for replication and stability of a native plasmid (pTM5) from Rhizobium sp. (Hedysarum) has been identified and isolated within a 5.4-kb PstI restriction fragment. The isolation of this region was accomplished by cloning endonuclease-restricted pTM5 DNA into a ColE1-type replicon and selecting the recombinant plasmids containing the pTM5 replicator (pTM5 derivative plasmids) by their ability to replicate in Rhizobium. DNA homology studies revealed that pTM5-like replicons are present in cryptic plasmids from some Rhizobium sp. (Hedysarum) strains but not in plasmids from strains of other Rhizobium species or Agrobacterium tumefaciens. The pTM5 derivative plasmids were able to replicate in Escherichia coli and A. tumefaciens and in a wide range of Rhizobium species. On the basis of stability assays in the absence of antibiotic selective pressure, the pTM5 derivative plasmids were shown to be highly stable in both free-living and symbiotic cells of Rhizobium sp. (Hedysarum). The stability of these plasmids in other species of Rhizobium and in A. tumefaciens varied depending on the host and on the plasmid. Most pTM5 derivative plasmids tested showed significantly higher symbiotic stability than RK2 derivative plasmids pRK290 and pAL618 in Rhizobium sp. (Hedysarum), R. meliloti, and R. leguminosarum bv. phaseoli. Consequently, we consider that the constructed pTM5 derivative plasmids are potentially useful as cloning vectors for Rhizobiaceae.     

Use of transmissible plasmids as cloning vectors in Caulobacter crescentus

Cloning vectors for studies of Caulobacter crescentus genes should be transferable between Escherichia coli and C. crescentus since a transformation system has not been developed for C. crescentus. We have tested a large number of vectors containing IncP or IncQ replicons and found that many of the vectors containing IncQ replicons, and all but one of the vectors containing IncP replicons, are readily transferred by conjugation into C. crescentus. All of the plasmids tested were maintained in C. crescentus at 1 to 5 copies per cell, but plasmids containing IncP replicons were more stable than plasmids containing IncQ replicons. Further studies with a derivative of the IncQ plasmid R300B showed that when a promoterless kanamycin (Km)-resistance gene (npt2) was inserted into the intercistronic region of the sul-aphC (Su^R-Sm^R) operon, Km resistance was expressed only when the npt2 gene was inserted such that it would be transcribed from the sul promoter. These data indicate that R300B does not contain sequences which would provide promoter function in C. crescentus in the orientation opposite to that of the sul operon and that any genes cloned in this orientation would require native promoters for expression. To provide greater versatility for cloning into R300B, additional vectors were constructed by the addition of multiple cloning sites in the intercistronic region of the sul-aphC operon. In addition, chromosomal DNA libraries were constructed in R300B and in the cosmid vector pLAFR1-7. Specific clones from these libraries containing genes of interest were identified by complementation of the appropriate C. crescentus mutants.     

Two Related Rolling Circle Replication Plasmids from Salt-Tolerant Bacteria

In a range of salt-tolerant bacteria isolated from soil, rhizosphere, and phyloplane, cross-hybridization tests revealed a group of seven plasmids which were chosen for further study. Two plasmids (pSH1418 and pSH1451) were picked as representative examples of the two related subgroups. Restriction mapping and Southern blotting identified a region common to the two plasmids which later was identified as encoding the replication functions. We were unable to join these plasmids to high-copy-number vectors but this was possible with low-copy-number IncP vectors. InEscherichia coli,cloned plasmids pSH1418 and pSH1451 conferred salt tolerance but the phenotype was unstable, with the loss of salt tolerance apparently being correlated with structural instability of the plasmid DNA. Plasmid pSH1451 was sequenced and shown to be closely related to RCR plasmids of Gram-positive bacteria. The host of this plasmid was classified asBacillus pumilusby rDNA typing and lipid profiling by gas chromatography. A number of open reading frames (orfs) which could code for salt tolerance or other functions were identified in the plasmid sequence. Sequence similarity to previously sequenced genes suggested that the products of orf4 and orf5 may work together to transport a molecule such as aspartate ion that may promote osmotolerance.     

Identification of the host-range DNA which allows Rhizobium leguminosarum strain TOM to nodulate cv. Afghanistan peas

Summary The special ability of Rhizobium leguminosarum strain TOM to nodulate cv. Afghanistan peas had previously been shown to be determined by the symbiotic plasmid, pRL5JI, of this strain. A region of pRL5JI, 2.0 kb in size, was found to confer the ability to nodulate cv. Afghanistan peas when transferred to strains of R. leguminosarum which normally fail to nodulate this host. This region of pRL5JI, responsible for the extension of host-range, was closely linked to, but did not include, the genes required for root hair curling. Although extensive homology has been found between the R. leguminosarum nod genes on pRL5JI and those on the normal symbiotic plasmid pRL1JI, a fragment from the 2.0 kb region involved in nodulation of cv. Afghanistan has been identified, which was not homologous to DNA in strains which do not nodulate cv. Afghanistan.     

A modular toolbox for Golden‐Gate‐based plasmid assembly streamlines the generation of Ralstonia solanacearum species complex knockout strains and multi‐cassette complementation constructs

Members of the Ralstonia solanacearum species complex (Rssc) cause bacterial wilt, a devastating plant disease that affects numerous economically important crops. Like other bacterial pests, Rssc injects a cocktail of effector proteins via the bacterial type III secretion system into host cells that collectively promote disease. Given their functional relevance in disease, the identification of Rssc effectors and the investigation of their in planta function are likely to provide clues on how to generate pest‐resistant crop plants. Accordingly, molecular analysis of effector function is a focus of Rssc research. The elucidation of effector function requires corresponding gene knockout strains or strains that express the desired effector variants. The cloning of DNA constructs that facilitate the generation of such strains has hindered the investigation of Rssc effectors. To overcome these limitations, we have designed, generated and functionally validated a toolkit consisting of DNA modules that can be assembled via Golden‐Gate (GG) cloning into either desired gene knockout constructs or multi‐cassette expression constructs. The Ralstonia‐GG‐kit is compatible with a previously established toolkit that facilitates the generation of DNA constructs for in planta expression. Accordingly, cloned modules, encoding effectors of interest, can be transferred to vectors for expression in Rssc strains and plant cells. As many effector genes have been cloned in the past as GATEWAY entry vectors, we have also established a conversion vector that allows the implementation of GATEWAY entry vectors into the Ralstonia‐GG‐kit. In summary, the Ralstonia‐GG‐kit provides a valuable tool for the genetic investigation of genes encoding effectors and other Rssc genes.     

Copper-resistant bacteria from industrial effluents and their role in remediation of heavy metals in wastewater

Six copper-resistant bacterial strains were isolated from wastewater of tanneries of Kasur and Rohi Nala. Two strains tolerated copper at 380 mg/L, four up to 400 mg/L. Three strains were identified as members of the genusSalmonella; one strain was identified asStreptococcus pyrogenes, one asVagococcus fluvialis and the last was identified asEscherichia coli. The pH and temperature optimum for two of them were 7.0 and 30 °C, respectively; four strains had corresponding optima at 7.5 and 37 °C, respectively. All bacterial isola-tes showed resistance against Ag⁺ (280–350 mg/L), Co²⁺ (200–420), Cr^VI (280–400), Cd²⁺ (250–350), Hg²⁺ (110–200), Mn²⁺ (300–380), Pb²⁺ (300–400), Sn²⁺ (480–520) and Zn²⁺ (300–450). Largesized plasmids (>20 kb), were detected in all of the strains. After the isolates were cured of plasmids with ethidium bromide, the efficiency of curing was estimated in the range of 60–90%. Reference strain ofE. coli was transformed with the plasmids of the bacterial isolates which grew in Luria-Bertani medium containing 100 mg/L Cu²⁺. The capability to adsorb and afterwards accumulate Cu²⁺ inside their cells was assayed by atomic absorption spectrophotometer; all bacterial cells had the ability to adsorb 50–80 % of the Cu²⁺ and accumulate 30–45 % Cu²⁺ inside them after 1 d of incubation.     

Fast genome editing in Bacillus subtilis

Bacillus subtilis is a model organism for Gram‐positive bacteria and widely used in the study of cellular functions and processes including protein secretion, sporulation, and signal transduction. It is also an important industrial host for the production of proteins and chemicals. Generally, genome editing of B. subtilis often needs the construction of integration vectors in Escherichia coli, linearizing the constructed plasmids, and subsequent transformation of the linear deoxyribonucleic acid via natural competence or electroporation. In this work, we examined the feasibility to directly transform and integrate B. subtilis using linear deoxyribonucleic acid from Gibson assembly without the need for cloning in E. coli. Linear deoxyribonucleic acid of 8–10 kb showed the highest transformation efficiency which was similar to that of using linearized plasmids constructed in E. coli. This method shortens the overall process from 1 week to 1 day and allows the integration of multiple genes in one step, providing a simple and fast method for genome editing in B. subtilis.     

Wingea,a new genus of the Saccharomycetaceae

The yeast species previously described asPichia robertsii v. d. Walt has been transferred to the new genusWingea. The diagnosis for the genus is given.     

Distribution and analysis of plasmids inStreptococcus thermophilus

Summary In a survey of 35 strains ofStreptococcus thermophilus, 13 strains were found to harbor plasmid DNA. Most of these strains contained plasmid species varying in size from 2.2 to 7.15 kilobases. Only three strains had more than one plasmid species. Each of the nine distinct types of plasmid DNAs identified had two or more unique recognition sites for restriction endonucleases. The characteristics of the indigenous cryptic plasmids ofS. thermophilus may allow their development as cloning vectors useful in the genetic engineering of this species and other streptococci that are important in food production     

Characterization of new plasmids from methylotrophic bacteria

Several tens of methanol-utilizing bacterial strains isolated from soil were screened for the presence of plasmids. From the obligate methylotrophMethylomonas sp. strain R103a plasmid pIH36 (36 kb) was isolated and its restriction map was constructed. In pink-pigmented facultative methylotrophs (PPFM), belonging to the genusMethylobacterium four plasmids were detected: plasmids pIB200 (200 kb) and pIB14 (14 kb) in the strain R15d and plasmids pWU14 (14 kb) and pWU7 (7.8 kb) in the strain M17. Because of the small size and the presence of several unique REN sites (HindIII, EcoRI, NcoI), plasmid pWU7 was chosen for the construction of a vector for cloning in methylotrophs. Cointegrates pKWU7A and pKWU7B were formed between pWU7 and theE. coli plasmid pK19 Km^r, which were checked for conjugative transfer fromE. coli into the methylotrophic host.     

Evaluation of the use of <Emphasis Type="Italic">recN</Emphasis> sequence analysis in the phylogeny of the genus <Emphasis Type="Italic">Amycolatopsis</Emphasis>

Partial recN gene sequences (>1 kb) were obtained from 35 type strains of the genus Amycolatopsis. Phylogenetic trees were constructed to determine the effectiveness of using this gene to predict taxonomic relationships within the genus. The use of recN sequence analysis as an alternative to DNA–DNA hybridization (DDH) for distinguishing closely related species was also assessed. The recN based phylogeny mostly confirmed the conventional 16S rRNA and gyrB gene-based phylogenies and thus provides further support for these phylogenetic groupings. As is the case for the gyrB gene, pairwise recN sequence similarities cannot be used to predict the DNA relatedness between type strains but the recN genetic distance can be used as a means to assess quickly whether an isolate is likely to represent a new species in the genus Amycolatopsis. A recN genetic distance of >0.04 between two Amycolatopsis strains is proposed to provide a good indication that they belong to different species (and that polyphasic taxonomic characterization of the unknown strain is worth undertaking).     

Isolation of plasmids present in thermophilic strains from hot springs in Jordan

The plasmid profile of two thermophilic bacterial strains isolated from recreation thermal springs in Jordan has been investigated. These strains are Streptococcus thermophilus and Bacillus sp1, which have been isolated from Zerka – Maeen and Himma hot springs respectively. Supercoiled and circular plasmid forms were detected, explaining the effect of DNA conformation on the mobility of the plasmid in the agarose gel electrophoresis. Two plasmids have been isolated and characterized by restriction endonucleases to facilitate their use as cloning vectors in thermophilic strains. The sizes of the plasmids were approximately 3 kb (from Streptococcus thermophilus) and 7 kb (from Bacillus spl). These plasmids were then digested with three different restriction enzymes (EcoRI, Bam HI, and HindIII), one of which was found to possess a single site for both plasmids, this enzyme is EcoRI.     

Plasmid profiles ofMycobacterium fortuitum complex isolates

Six plasmids differing in molecular weights were found in isolates ofMycobacterium fortuitum, M. chelonae, and other nonclassified, nonchromogenic, rapidly growing mycobacteria. One of the plasmids of molecular weight of 32.0 Kb was present in all strains analyzed; a large plasmid of 112.0-Kb molecular weight was present only in strains identified asM. fortuitum var.peregrinum. Although the strains had distinct plasmid profiles, none of the 15 cultural and biochemical properties and susceptibility to 18 drugs that were tested could be attributed to the occurrence of these plasmids.