Scaffoldin Conformation and Dynamics Revealed by a Ternary Complex from the Clostridium thermocellum Cellulosome

Cellulosomes are multienzyme complexes responsible for efficient degradation of plant cell wall polysaccharides. The nonenzymatic scaffoldin subunit provides a platform for cellulolytic enzyme binding that enhances the overall activity of the bound enzymes. Understanding the unique quaternary structural elements responsible for the enzymatic synergy of the cellulosome is hindered by the large size and inherent flexibility of these multiprotein complexes. Herein, we have used x-ray crystallography and small angle x-ray scattering to structurally characterize a ternary protein complex from the Clostridium thermocellum cellulosome that comprises a C-terminal trimodular fragment of the CipA scaffoldin bound to the SdbA type II cohesin module and the type I dockerin module from the Cel9D glycoside hydrolase. This complex represents the largest fragment of the cellulosome solved by x-ray crystallography to date and reveals two rigid domains formed by the type I cohesin·dockerin complex and by the X module-type II cohesin·dockerin complex, which are separated by a 13-residue linker in an extended conformation. The type I dockerin modules of the four structural models found in the asymmetric unit are in an alternate orientation to that previously observed that provides further direct support for the dual mode of binding. Conserved intermolecular contacts between symmetry-related complexes were also observed and may play a role in higher order cellulosome structure. SAXS analysis of the ternary complex revealed that the 13-residue intermodular linker of the scaffoldin subunit is highly dynamic in solution. These studies provide fundamental insights into modular positioning, linker flexibility, and higher order organization of the cellulosome.     

Identification of the cellulose-binding domain of the cellulosome subunit S1 from Clostridium thermocellum YS

The 3' region of a gene designated cipB, which shows strong homology with cipA that encodes the cellulosome SL subunit of Clostridium thermocellum ATCC 27405, was isolated from a gene library of C. thermocellum strain YS. The truncated S1 protein encoded by the cipB derivative bound tightly to cellulose. The cellulose-binding domain in this polypeptide consisted of a C-terminal proximal 167 residue sequence which showed complete identity with residues 337-503 of mature SL from C. thermocellum strain ATCC 27405. The cellulose-binding domain interacted with both crystalline and amorphous cellulose, but not with xylan.     

Modeling the self-assembly of the cellulosome enzyme complex

Most bacteria use free enzymes to degrade plant cell walls in nature. However, some bacteria have adopted a different strategy wherein enzymes can either be free or tethered on a protein scaffold forming a complex called a cellulosome. The study of the structure and mechanism of these large macromolecular complexes is an active and ongoing research topic, with the goal of finding ways to improve biomass conversion using cellulosomes. Several mechanisms involved in cellulosome formation remain unknown, including how cellulosomal enzymes assemble on the scaffoldin and what governs the population of cellulosomes created during self-assembly. Here, we present a coarse-grained model to study the self-assembly of cellulosomes. The model captures most of the physical characteristics of three cellulosomal enzymes (Cel5B, CelS, and CbhA) and the scaffoldin (CipA) from Clostridium thermocellum. The protein structures are represented by beads connected by restraints to mimic the flexibility and shapes of these proteins. From a large simulation set, the assembly of cellulosomal enzyme complexes is shown to be dominated by their shape and modularity. The multimodular enzyme, CbhA, binds statistically more frequently to the scaffoldin than CelS or Cel5B. The enhanced binding is attributed to the flexible nature and multimodularity of this enzyme, providing a longer residence time around the scaffoldin. The characterization of the factors influencing the cellulosome assembly process may enable new strategies to create designers cellulosomes.     

Cellulosome-based, Clostridium-derived multi-functional enzyme complexes for advanced biotechnology tool development: Advances and applications

The cellulosome is one of nature's most elegant and elaborate nanomachines and a key biological and biotechnological macromolecule that can be used as a multi-functional protein complex tool. Each protein module in the cellulosome system is potentially useful in an advanced biotechnology application. The high-affinity interactions between the cohesin and dockerin domains can be used in protein-based biosensors to improve both sensitivity and selectivity. The scaffolding protein includes a carbohydrate-binding module (CBM) that attaches strongly to cellulose substrates and facilitates the purification of proteins fused with the dockerin module through a one-step CBM purification method. Although the surface layer homology (SLH) domain of CbpA is not present in other strains, replacement of the cell surface anchoring domain allows a foreign protein to be displayed on the surface of other strains. The development of a hydrolysis enzyme complex is a useful strategy for consolidated bioprocessing (CBP), enabling microorganisms with biomass hydrolysis activity. Thus, the development of various configurations of multi-functional protein complexes for use as tools in whole-cell biocatalyst systems has drawn considerable attention as an attractive strategy for bioprocess applications. This review provides a detailed summary of the current achievements in Clostridium-derived multi-functional complex development and the impact of these complexes in various areas of biotechnology.     

Molecular and biochemical characterization of <Emphasis Type="Italic">Ba</Emphasis>-EGA,a cellulase secreted by <Emphasis Type="Italic">Bacillus</Emphasis> sp. AC-1 from <Emphasis Type="Italic">Ampullaria crosseans</Emphasis>

A novel gene (Ba-ega) of Bacillus sp. AC-1, encoding an endoglucanase (Ba-EGA), was cloned and expressed in Escherichia coli. Ba-ega, containing a 1,980-bp open reading frame (ORF), encoded a protein of 659 amino acids and had a molecular mass of 74.87 kDa. Ba-EGA was a modular enzyme composed of a family-9 glycosyl hydrolase catalytic module (CM9) and a family-3 carbohydrate-binding module (CBM3). To investigate the functions of the CBM3 and CM9, a number of truncated derivatives of Ba-EGA were constructed, and all were active. The catalytic module (rCM9) alone was less stable at high temperature than the recombinant Ba-EGA (rBa-EGA). The temperature stability for the complex of rCM9 and rCBM3 was still lower than rBa-EGA, but higher than rCM9 alone. These observations indicated the existence of a non-covalent interaction between CM9 and CBM3 that might strengthen the stability of CM9. However, this interaction is not strong enough to mimic the protective effect of the CBM in the wild-type enzyme.     

Expression, purification and structural characterization of the scaffoldin hydrophilic X-module from the cellulosome of Clostridium thermocellum

The cellulosome is a membrane-bound, extracellular multi-subunit complex responsible for the degradation of crystalline cellulose by a number of organisms including anaerobic bacteria and fungi. The hydrophilic X-module (CipA-X) from the modular scaffoldin subunit of Clostridium thermocellum cellulosome has been proposed to play various roles in cellulosomal function, including thermal and structural stability. Towards elucidating the function of CipA-X using structural and biophysical studies, the region comprising residues 1692-1785 from the C. thermocellum CipA cDNA encoding CipA-X was cloned into a pET21b expression vector. When expressed in Escherichia coli, the C-terminal His-tagged protein accumulated in the insoluble fraction. Cell fractionation experiments showed that the recombinant protein was localized to inclusion bodies. Refolding and purification involved denaturation of the whole cell lysate by addition of urea, followed by a nickel-Sepharose chromatography step and dialysis into native conditions (25 mM Tris-HCl, pH 7.4, 50 mM NaCl, and 10 mM EDTA). A final gel filtration step purified the protein to homogeneity, yielding 40 mg/L. The two-dimensional 1H-15N correlation spectrum of uniformly 15N-labelled CipA-X showed the characteristics of a well-folded protein comprising significant beta-structure, which is in agreement with the circular dichroism data.     

A lectin from Platypodium elegans with unusual specificity and affinity for asymmetric complex N-glycans

Lectin activity with specificity for mannose and glucose has been detected in the seed of Platypodium elegans, a legume plant from the Dalbergieae tribe. The gene of Platypodium elegans lectin A has been cloned, and the resulting 261-amino acid protein belongs to the legume lectin family with similarity with Pterocarpus angolensis agglutinin from the same tribe. The recombinant lectin has been expressed in Escherichia coli and refolded from inclusion bodies. Analysis of specificity by glycan array evidenced a very unusual preference for complex type N-glycans with asymmetrical branches. A short branch consisting of one mannose residue is preferred on the 6-arm of the N-glycan, whereas extensions by GlcNAc, Gal, and NeuAc are favorable on the 3-arm. Affinities have been obtained by microcalorimetry using symmetrical and asymmetrical Asn-linked heptasaccharides prepared by the semi-synthetic method. Strong affinity with K_d of 4.5 μm was obtained for both ligands. Crystal structures of Platypodium elegans lectin A complexed with branched trimannose and symmetrical complex-type Asn-linked heptasaccharide have been solved at 2.1 and 1.65 Å resolution, respectively. The lectin adopts the canonical dimeric organization of legume lectins. The trimannose bridges the binding sites of two neighboring dimers, resulting in the formation of infinite chains in the crystal. The Asn-linked heptasaccharide binds with the 6-arm in the primary binding site with extensive additional contacts on both arms. The GlcNAc on the 6-arm is bound in a constrained conformation that may rationalize the higher affinity observed on the glycan array for N-glycans with only a mannose on the 6-arm.     

The Modular Organisation and Stability of a Thermostable Family 10 Xylanase

The thermophilic marine bacterium Rhodothermus marinus produces a modular family 10 xylanase (Xyn10A). It consists of two N-terminal family 4 carbohydrate binding modules (CBMs) followed by a domain of unknown function (D3), and a catalytic module (CM) flanked by a small fifth domain (D5) at its C-terminus. Several truncated mutants of the enzyme have been produced and characterised with respect to biochemical properties and stability. Multiple calcium binding sites are shown to be present in the two N-terminal CBMs and recent evidence suggests that the third domain of the enzyme also has the ability to bind the same metal ligand. The specific binding of Ca²⁺ was demonstrated to have a pronounced effect on thermostability as shown by differential scanning calorimetry and thermal inactivation studies. Furthermore, deletion mutants of the enzyme were less stable than the full-length enzyme suggesting that module interactions contributed to the stability of the enzyme. Finally, recent evidence indicates that the fifth domain of Xyn10A is a novel type of module mediating cell-attachment.     

Analysis of peptide affinity to major histocompatibility complex proteins for the two-step binding mechanism

A novel approach to the analysis of an equilibrium two-step peptide-protein binding is developed and applied to the experimental data. The first step of the process is the release of an endogenous peptide from a binding groove and the second is the binding of an added peptide. The method developed enables us to determine consequently the maximum protein occupancy level (protein-binding capacity), the dissociation constant of an endogenous peptide, and the dissociation constant of a binding (antigenic) peptide. It is shown and confirmed by experimental data that the value of an equilibrium dissociation constant of a binding peptide could be much less than the experimental value of ED(50) (concentration of added peptide required to bind half of the protein), but not equal to that commonly assumed for major histocompatibility complex (MHC)-peptide binding. The model considered gives a clear understanding of why some peptides may be good binders to MHC protein in vitro, but do not exhibit anticipated activity on the cellular level and vice versa.     

The Modular Organisation and Stability of a Thermostable Family 10 Xylanase

The thermophilic marine bacterium Rhodothermus marinus produces a modular family 10 xylanase (Xyn10A). It consists of two N-terminal family 4 carbohydrate binding modules (CBMs) followed by a domain of unknown function (D3), and a catalytic module (CM) flanked by a small fifth domain (D5) at its C-terminus. Several truncated mutants of the enzyme have been produced and characterised with respect to biochemical properties and stability. Multiple calcium binding sites are shown to be present in the two N-terminal CBMs and recent evidence suggests that the third domain of the enzyme also has the ability to bind the same metal ligand. The specific binding of Ca²⁺ was demonstrated to have a pronounced effect on thermostability as shown by differential scanning calorimetry and thermal inactivation studies. Furthermore, deletion mutants of the enzyme were less stable than the full-length enzyme suggesting that module interactions contributed to the stability of the enzyme. Finally, recent evidence indicates that the fifth domain of Xyn10A is a novel type of module mediating cell-attachment.     

Analysis of glycoside hydrolase family 98: catalytic machinery, mechanism and a novel putative carbohydrate binding module

Glycoside hydrolases (GHs) are diverse enzymes of biotechnological and medical importance. Bioinformatics contributes to our understanding of GH structure and function in various ways, including dissection of their typically modular structures and detection of the distant evolutionary relationships between families that often allow for prediction of catalytic sites. Here these twin strands are applied to the recently described GH98 family, the founder member of which is a blood group glycotope-cleaving endo-beta-galactosidase of potential medical importance from Clostridium perfringens. Three domains can be discerned including a central catalytic TIM barrel domain in which putative catalytic residues can be assigned. Distant homologies and domain contexts suggest that the N-terminal domain is a novel carbohydrate binding module.     

Development of a carbohydrate binding assay for the B-oligomer of pertussis toxin and toxoid

Pertussis toxin (PTx) is a major virulence factor produced by Bordetella pertussis and, in its detoxified form PTd, is an important component of pertussis vaccines. The in vivo histamine sensitization test (HIST) is currently used for the safety testing of these vaccines. However, an alternative test is needed because of large assay variability and ethical concerns with regard to animal usage. PTx has two functionally distinct domains: the enzymatic A-protomer and the B-oligomer that facilitates host-cell binding and entry of PTx into the cell. The development of a quantitative PTx binding assay using glycoproteins or defined oligosaccharides is reported. PTx was found to bind preferentially to multiantennary N-glycans, with the highest binding toward the fully sialylated structures. In contrast, PTd lost the ability of PTx to bind to sialylated multiantennary structures but retained some capacity to bind to neutral multiantennary structures. The developed assay was shown to be specific, sensitive, and robust and could be used for investigating the mechanisms of PTx detoxification and for monitoring PTx binding activity in vaccine formulations. This assay could also be used to complement a PTx-enzymatic assay, developed recently, and together they may form the basis of a potential alternative in vitro assay to replace the in vivo HIST.     

Functional characterization and mutation analysis of family 11, Carbohydrate-Binding Module (<Emphasis Type="Italic">Ct</Emphasis>CBM11) of cellulosomal bifunctional cellulase from <Emphasis Type="Italic">Clostridium thermocellum</Emphasis>

The non-catalytic, family 11 carbohydrate binding module (CtCBM11) belonging to a bifunctional cellulosomal cellulase from Clostridium thermocellum was hyper-expressed in E. coli and functionally characterized. Affinity electrophoresis of CtCBM11 on nondenaturing PAGE containing cellulosic polysaccharides showed binding with β-glucan, lichenan, hydroxyethyl cellulose and carboxymethyl cellulose. In order to elucidate the involvement of conserved aromatic residues Tyr 22, Trp 65 and Tyr 129 in the polysaccharide binding, site-directed mutagenesis was carried out and the residues were changed to alanine. The results of affinity electrophoresis and binding adsorption isotherms showed that of the three mutants Y22A, W65A and Y129A of CtCBM11, two mutants Y22A and Y129A showed no or reduced binding affinity with polysaccharides. These results showed that tyrosine residue 22 and 129 are involved in the polysaccharide binding. These residues are present in the putative binding cleft and play a critical role in the recognition of all the ligands recognized by the protein.     

Evaluation of staphylococcal cell surface display and flow cytometry for postselectional characterization of affinity proteins in combinatorial protein engineering applications

For efficient generation of high-affinity protein-based binding molecules, fast and reliable downstream characterization platforms are needed. In this work, we have explored the use of staphylococcal cell surface display together with flow cytometry for affinity characterization of candidate affibody molecules directly on the cell surface. A model system comprising three closely related affibody molecules with different affinities for immunoglobulin G and an albumin binding domain with affinity for human serum albumin was used to investigate advantages and differences compared to biosensor technology in a side-by-side manner. Equilibrium dissociation constant (K(D)) determinations as well as dissociation rate analysis were performed using both methods, and the results show that the on-cell determinations give both K(D) and dissociation rate values in a very fast and reproducible manner and that the relative affinities are very similar to the biosensor results. Interestingly, the results also show that there are differences between the absolute affinities determined with the two different technologies, and possible explanations for this are discussed. This work demonstrates the advantages of cell surface display for directed evolution of affinity proteins in terms of fast postselectional, on-cell characterization of candidate clones without the need for subcloning and subsequent protein expression and purification but also demonstrates that it is important to be aware that absolute affinities determined using different methods often vary substantially and that such comparisons therefore could be difficult.     

Lectinochemical studies on the affinity of Anguilla anguilla agglutinin for mammalian glycotopes

Anguilla anguilla agglutinin (AAA) is a fucose-specific lectin found in the serum of the fresh water eel. It is suggested to be associated with innate immunity by recognizing disease-associated cell surface glycans, and has been widely used as a reagent in hematology and glycobiology. In order to gain a better understanding of AAA for further applications, it is necessary to elucidate its binding profile with mammalian glycotopes. We, therefore, analyzed the detailed carbohydrate specificity of AAA by enzyme-linked lectinosorbent assay (ELLSA) with our extended glycan/ligand collection and lectin-glycan inhibition assay. Among the glycans tested, AAA reacted well with nearly all human blood group Ah (GalNAcalpha1-->3[LFucalpha1-->2]Gal), Bh (Galalpha1-->3[LFucalpha1-->2]Gal), H LFucalpha1-->2Gal) and Leb (Fucalpha1-->2Galbeta1-->3[Fucalpha1-->4]GlcNAc) active glycoproteins (gps), but not with blood group Lea (Galbeta1-->3[Fucalpha1-->4]GlcNAc) substances, suggesting that residues and optimal density of alpha1-2 linked LFuc to Gal at the non-reducing end of glycoprotein ligands are essential for lectin-carbohydrate interactions. Blood group precursors, Galbeta1-3GalNAc (T), GalNAcalpha1-Ser/Thr (Tn) containing glycoproteins and N-linked plasma gps, gave only negligible affinity. Among the mammalian glycotopes tested, Ah, Bh and H determinants were the best, being about 5 to 6.7 times more active than LFuc, but were weaker than p-nitrophenylalphaFuc indicating that hydrophobic environment surrounding the LFuc moiety enhance the reactivity. The hierarchy of potency of oligo- and monosaccharides can be ranked as follows: p-nitrophenyl-alphaFuc > Ah, Bh and H > LFuc > LFucalpha1-->2Galbeta1-->4Glc (2'-FL) and Galbeta1-->4[LFucalpha1-->3]Glc (3'-FL), while LNDFH I (Leb hexa-), Lea, Lex (Galbeta1-->4[Fucalpha1-->3]GlcNAc), and LDFT (gluco-analogue of Ley) were inactive. From the present observations, it can be concluded that the combining site of AAA should be a small cavity-type capable of recognizing mainly H/crypto H and of binding to specific polyvalent ABH and Leb glycotopes.     

Crystal structure of the SH3 domain of betaPIX in complex with a high affinity peptide from PAK2

The p21-activated kinases (PAKs) are important effector proteins of the small GTPases Cdc42 and Rac and control cytoskeletal rearrangements and cell proliferation. The direct interaction of PAKs with guanine nucleotide exchange factors from the PIX/Cool family, which is responsible for the localization of PAK kinases to focal complexes in the cell, is mediated by a 24-residue peptide segment in PAKs and an N-terminal src homology 3 (SH3) domain in PIX/Cool. The SH3-binding segment of PAK contains the atypical consensus-binding motif PxxxPR, which is required for unusually high affinity binding. In order to understand the structural basis for the high affinity and specificity of the PIX-PAK interaction, we solved crystal structures for the N-terminal SH3 domain of betaPIX and for the complex of the atypical binding segment of PAK2 with the N-terminal SH3 domain of betaPIX at 0.92 A and 1.3A resolution, respectively. The asymmetric unit of the crystal contains two SH3 domains and two peptide ligands. The bound peptide adopts a conformation that allows for intimate contacts with three grooves on the surface of the SH3 domain that lie between the n-Src and RT-loops. Most notably, the arginine residue of the PxxxPR motif forms a salt-bridge and is tightly coordinated by a number of residues in the SH3 domain. This arginine-specific interaction appears to be the key determinant for the high affinity binding of PAK peptides. Furthermore, C-terminal residues of the peptide engage in additional interactions with the surface of the RT-loop, which significantly increases binding specificity. Compared to a recent NMR structure of a similar complex, our crystal structure reveals an alternate binding mode. Finally, we compare our crystal structure with the recently published betaPIX/Cbl-b complex structure, and suggest the existence of a molecular switch.     

Molecular dynamics simulation of interleukin-2 and its complex and determination of the binding free energy

Interleukin-2 (IL-2) protein belongs to the signal modulator cytokine's family and therefore it is prevalent for immunological responses. It has been identified as a centrally important potential drug target for the inhibition of protein-protein interactions; so as to suppress the immunological responses associated with autoimmune, inflammatory and immunological diseases, and cancer. In the present work, we have performed two independent 100?ns of molecular dynamics (MD) simulations on the apo IL-2 protein and its ligand-bound complex (with a potent inhibitor FRG), to study the effect of inhibitor binding on the dynamics and stability of the protein. The calculation of binding free energy via post-processing end state method of Molecular Mechanics Poisson Boltzmann Surface Area (MM-PBSA) and Molecular Mechanics Generalised Born Surface Area (MM-GBSA) has inferred a good correlation in accordance with the already reported experimental data, demonstrating that the free energy of binding calculated by the two methods has no significant difference. The investigation of individual components of free energy revealed that the association of IL-2 protein with FRG ligand is primarily driven by the van der Waals energy contribution that represents the non-polar/hydrophobic energy contribution as dominant in this case of ligand binding.     

Practical tools for molecular modeling of complex carbohydrates and their interactions with proteins

Computer modeling has become a valuable component of studies of carbohydrate three-dimensional structures and their relationship to function and properties. In this paper we examine the methods required for conformational modeling of carbohydrates, and we present a series of tools that have been developed to this end. These tools can be integrated into three-dimensional real-time molecular modeling software. A data base of pre-optimized carbohydrate fragments has been established to be used further in the construction of much more complex molecules. In addition we describe some possible uses of a data base of three dimensional structures of the disaccharide fragments present in the glycan moiety ofN-glycoprotein. A molecular mechanical force field appropriate for the conformational analysis of oligosaccharides has been derived by the addition of new parameters to the Tripos force field and is compatible with protein simulations. The new parametrization has been assessed in three stages of increasing complexity: computations of potential energy surfaces, conformational refinement of relevant oligosaccharides, modeling at the atomic level of a protein/carbohydrate complex.     

BiodMHC: an online server for the prediction of MHC class II-peptide binding affinity

Effective identification of major histocompatibility complex (MHC) molecules restricted peptides is a critical step in discovering immune epitopes. Although many online servers have been built to predict class Ⅱ MHC-peptide binding affinity, they have been trained on different datasets, and thus fail in providing a unified comparison of various methods. In this paper, we present our implementation of seven popular predictive methods, namely SMM-align, ARB, SVR-pairwise, Gibbs sampler, ProPred, LP-top2, and MHCPred, on a single web server named BiodMHC (http:∥biod.whu.edu.cn/BiodMHC/index.html, the software is available upon request). Using a standard measure of AUC (Area Under the receiver operating characteristic Curves), we compare these methods by means of not only cross validation but also prediction on independent test datasets. We find that SMM-align, ProPred, SVR-pairwise, ARB, and Gibbs sampler are the five best-performing methods. For the binding affinity prediction of class Ⅱ MHC-peptide, BiodMHC provides a convenient online platform for researchers to obtain binding information simultaneously using various methods.     

Mutation of the N-terminal proline 9 of BLMA from Streptomyces verticillus abolishes the binding affinity for bleomycin

A gene, blmA, from bleomycin (Bm)-producing Streptomyces verticillus, encodes a Bm-binding protein, designated BLMA. The expression of BLMA conferred resistance to Bm in the Escherichia coli host, whereas a mutant protein, designated Pro-9/Leu, with the N-terminal proline 9 residue in BLMA replaced by leucine, did not. We created a fusion protein between the maltose-binding protein (MBP) and a mutant protein Pro-9/Leu/Leu with Met-94 in Pro-9/Leu replaced by leucine. Pro-9/Leu/Leu from the fusion protein, obtained by digestion with CNBr digestion, did not inhibit DNA-cleaving and antibacterial activities of Bm. Native-polyacrylamide gel electrophoresis (PAGE) and gel filtration column chromatographic analysis showed that the molecular size of Pro-9/Leu/Leu is roughly half of that of BLMA, suggesting that the mutant protein cannot form dimeric structure. Furthermore, Far-UV circular dichroism (CD) spectrum of Pro-9/Leu/Leu was quite different from that of BLMA and similar to the spectra obtained from unordered proteins [Venyaminov, S.Y. and Vassilenko, K.S. (1994) Anal. Biochem. 222, 176–184], suggesting that the secondary structure of Pro-9/Leu/Leu is disrupted. These results indicate that the mutation abolishes not only dimer formation but also the secondary structure of BLMA, which results in the loss of its function as a Bm-resistance determinant.