Biosynthesis of poly(3-hydroxybutyrate) copolymers by Azotobacter chroococcum 7B: A precursor feeding strategy

A precursor feeding strategy for effective biopolymer producer strain Azotobacter chroococcum 7B was used to synthesize various poly(3-hydroxybutyrate) (PHB) copolymers. We performed experiments on biosynthesis of PHB copolymers by A. chroococcum 7B using various precursors: sucrose as the primary carbon source, various carboxylic acids and ethylene glycol (EG) derivatives [diethylene glycol (DEG), triethylene glycol (TEG), poly(ethylene glycol) (PEG) 300, PEG 400, PEG 1000] as additional carbon sources. We analyzed strain growth parameters including biomass and polymer yields as well as molecular weight and monomer composition of produced copolymers. We demonstrated that A. chroococcum 7B was able to synthesize copolymers using carboxylic acids with the length less than linear 6C, including poly(3-hydroxybutyrate-co-3-hydroxy-4-methylvalerate) (PHB-4MHV) using Y-shaped 6C 3-methylvaleric acid as precursor as well as EG-containing copolymers: PHB–DEG, PHB–TEG, PHB–PEG, and PHB–HV–PEG copolymers using short-chain PEGs (with n?≤?9) as precursors. It was shown that use of the additional carbon sources caused inhibition of cell growth, decrease in polymer yields, fall in polymer molecular weight, decrease in 3-hydroxyvalerate content in produced PHB–HV–PEG copolymer, and change in bacterial cells morphology that were depended on the nature of the precursors (carboxylic acids or EG derivatives) and the timing of its addition to the growth medium.     

Poly(β-hydroxyalkanoate) biosynthesis and accumulation by different Rhizobium species

Abstract Synthesis and accumulation of poly(β-hydroxy-alkanoate) in Rhizobium leguminosarum , R. leguminosarum biovar. trifolii, Rhizobium 'galega', Rhizobium 'hedysarum' and R. meliloti were studied.
Poly(β-hydroxybutyrate) is accumulated up to 55% of the cell dry weight. At 30–50% air saturation R. meliloti accumulates 50% of its biomass (5.5 g·1⁻¹ dry weight) as PHB after 90 h of batch fermentation. At 90% air saturation maximum accumulation (37.5%) of PHB occurs after 70 h cultivation.
R. meliloti strain 41 is able to synthesize the copolymer poly(β-hydroxybutyrate-co-β-hydroxyvalerate) at concentrations up to 58% of the biomass dry weight, containing up to 22 mol%β-hydroxyvalerate. Different concentrations of both copolymer and hydroxyvalerate were obtained when the microorganism was grown, in batch culture, in the presence of propionate or valerate and with glucose, sucrose or succinate as main carbon source.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1.

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

High cell density cultivation of Pseudomonas oleovorans: growth and production of poly (3-hydroxyalkanoates) in two-liquid phase batch and fed-batch systems

Pseudomonas oleovorans is able to accumulate poly(3-hydroxyalkanoates) (PHAs) under conditions of excess n-alkanes, which serve as sole energy and carbon source, and limitation of an essential nutrient such as ammonium. In this study we aimed at an efficient production of these PHAs by growing P. oleovorans to high cell densities in fed-batch cultures.To examine the efficiency of our reactor system, P. oleovorans was first grown in batch cultures using n-octane as growth substrate and ammonia water for pH regulation to prevent ammonium limiting conditions. When cell growth ceased due to oxygen limiting conditions, a maximum cell density of 27 g .L(-1) dry weight was obtained. When the growth temperature was decreased from the optimal temperature of 30 degrees -18 degrees C, cell growth continued to a final cell density of 35 g . L(-1) due to a lower oxygen demand of the cells at this lower incubation temperature.To quantify mass transfer rates in our reactor system, the volumetric oxygen transfer coefficient (k(L)a) was determined during growth of P. oleovorans on n-octane. Since the stirrer speed and airflow were increased during growth of the organism, the k(L)a also increased, reaching a constant value of 0.49 s(-1) at maximum airflow and stirrer speed of 2 L . min(-1) and 2500 rpm, respectively. This k(L)a value suggests that oxygen transfer is very efficient in our stirred tank reactor.Using these conditions of high oxygen transfer rates, PHA production by P. oleovorans in fed-batch cultures was studied. The cells were first grown batchwise to a density of 6 g . L(-1), after which a nutrient feed, consisting of (NH(4))(2)SO(4) and MgSO(4), was started. The limiting nutrient ammonium was added at a constant rate of 0.23 g NH(4) (+) per hour, and when after 38 h the feed was stopped, a biomass concentration of 37.1 g . L(-1) was obtained. The Cellular PHA content was 33% (w/w), which is equal to a final PHA yield of 12.1 g . L(-1) and an overall PHA productivity of 0.25 g PHA produced per liter medium per hour. (c) 1993 John Wiley & Sons, Inc.     

重组大肠杆菌合成聚(3-巯基丙酸)和聚(3-羟基丁酸-3-巯基丙酸)的研究

利用Clostridium acetobutylicum的丁酸激酶基因 (buk) 和磷酸转丁酰基酶基因(ptb),以及Thiocapsa pfennigii的PHA合成酶基因,设计了一条能够合成多种聚羟基烷酸的代谢途径,用构建的质粒转化大肠杆菌,获得了重组大肠杆菌菌株.前期的研究表明,在合适的前体物条件下,该重组大肠杆菌能够合成包括聚羟基丁酸、聚(羟基丁酸-戊酸)等多种生物聚酯[Liu and Steinbüchel, Appl. Environ. Microbiol. 66739-743].利用该重组大肠杆菌,通过生物催化作用合成了3-巯基丙酸的同型共聚酯,同时利用该重组大肠杆菌还获得了含3-巯基丙酸单体的多种异型共聚物.实验首先研究了3-巯基丙酸对大肠杆菌生长的影响,在此基础上优化了培养过程中添加3-巯基丙酸的时机和浓度,结果表明,在实验的条件下,细胞合成聚(3-巯基丙酸)可达6.7%(占细胞干重),合成聚(3-羟基丁酸-3-巯基丙酸)(分子中3-巯基丙酸3-羟基丁酸=31)可达24.3%.实验进一步研究了同时或分别表达以上3个基因的重组大肠杆菌合成聚合物的能力,结果表明只有当3个基因同时表达时才能合成聚合物,说明3个基因对合成过程是必须的,从而表明了合成途径是按照设计的路线进行的.还通过GC/MS、GPC、IR等手段对合成的化合物进行了定性的研究.聚(3-巯基丙酸)或聚(3-羟基丁酸-3-巯基丙酸)等聚酯属于一类新型生物聚合物,它在分子骨架中含有硫酯键,不同于聚羟基烷酸酯的氧酯键,从而具有显著不同的物理、化学、光学等性质和具有重要的潜在应用价值.     

Self-aggregates of oligoarginine-conjugated poly(amino acid) derivatives as a carrier for intracellular drug delivery

N_ω-2,2,4,6,7-Pentamethyldihydrobenzofuran-5-sulfonyl (N_ω-Pbf)-protected oligoarginine was directly conjugated to poly(amino acid) derivatives modified with a long alkyl chain. The final concentration of conjugated peptides was easily controlled by the feed ratio of oligoarginine to polymer backbone and a final soluble polymeric system was obtained by the deprotection of N_ω-Pbf groups. The polymeric conjugates formed stable self-aggregates of size range of 8–40 nm in aqueous solution and effectively internalized into HeLa cells by adsorptive endocytosis.Revisions requested 8 April 2005; Revisions received 6 May 2005     

3-脱氢莽草酸生物合成的代谢工程

3-脱氢莽草酸,是芳香族氨基酸生物合成代谢途径中一种重要的中间产物,可作为一些化学合成制剂和药物中间原料。这样以无毒可再生物质为起始原料的合成方法与传统的有机合成化学制剂的方法相比,对环境更加有利。此外,它还是一种十分有效的抗氧化剂。工业上一般采用化学合成法和发酵法来生产3-脱氢莽草酸,随着代谢工程的兴起,使得更加理性改造菌株成为可能,这更加促进了发酵法的广泛应用。本文主要介绍了代谢工程在生物合成3-脱氢莽草酸生产菌改造中的应用情况,其中涉及3-脱氢莽草酸生物合成途径中相关基因及其酶的调控、中心代谢途径的改造和3-脱氢莽草酸合成支路的修饰等,并探讨了将来的发展前景。     

Immobilization of invertase onto poly(3-methylthienyl methacrylate)/poly(3-thiopheneacetic acid) matrix

A novel immobilization matrix, poly(3-methylthienyl methacrylate)–poly(3-thiopheneacetic acid) (PMTM–PTAA), was synthesized and used for the covalent immobilization of Saccharomyces cerevisiae invertase to produce invert sugar. The immobilization resulted in 87% immobilization efficiency. Optimum conditions for activity were not affected by immobilization and the optimum pH and temperature for both free and immobilized enzyme were found to be 4.5 and 55 °C, respectively. However, immobilized invertase was more stable at high pH and temperatures. The kinetic parameters for free and immobilized invertase were also determined using the Lineweaver–Burk plot. The K_m values were 35 and 38 mM for free and immobilized enzyme, respectively. The V_max values were 29 and 24 mg glucose/mg enzyme min for free and immobilized enzyme, respectively. Immobilized enzyme could be used for the production of glucose and fructose from sucrose since it retained almost all the initial activity for a month in storage and retained the whole activity in repeated 50 batch reactions.     

Stereoselective routes towards the synthesis of unusual bis(amino acids) and cyclic amino acids

Stereoselective syntheses are described of bridged bis(glycines) as conformationally constrained substitutes for cystine, and of cyclic -amino acids where the -carbon of the amino acid is part of a five-, six- or seven-membered ring which may hold a hydroxy group as a threonine analogue.     

Stereoselective routes towards the synthesis of unusual bis(amino acids) and cyclic amino acids

Summary Stereoselective syntheses are described of bridged bis(glycines) as conformationally constrained substitutes for cystine, and of cyclic α-amino acids where the α-carbon of the amino acid is part of a five-, six- or seven-membered ring which may hold a hydroxy group as a threonine analogue.     

Poly(gamma-L-diaminobutanoic acid), a novel poly(amino acid), coproduced with poly(epsilon-L-lysine) by two strains of Streptomyces celluloflavus

Two poly(ɛ- l -lysine) (ɛ-PL) producer strains of Streptomyces celluloflavus secreted a novel polymeric substance into their culture broths along with ɛ-PL. Three types of HPLC analysis plus one- and two-dimensional ¹H and ¹³C nuclear magnetic resonance experiments revealed that the secreted substance was poly(γ- l -diaminobutanoic acid) (γ-PAB), an l -α,γ-diaminobutanoic acid ( l -DAB) homopolymer linking between γ-amino and α-carboxylic acid functional groups. The γ-PABs from the two strains had an identical chemical structure, and the same number-average molecular weight of 2100–2200. No copolymers composed of the two amino acids l -DAB and l- lysine were found in either of the broths from the producers. Both strains coproduced high levels of the two poly(amino acid)s in the presence of SO₄²⁻ at pH 4.0 and 4.5 L min⁻¹ aeration in a 5-L jar fermentor. γ-PAB exhibited strong inhibitory activities against various yeasts and weaker actions against bacteria than ɛ-PL. γ-PAB may have various biological functions similar to ɛ-PL, and the use of γ-PAB along with ɛ-PL would be advantageous for technical applications in various fields.     

聚3-羟基丁酸酯（PHB）生物降解过程的研究

利用DS9701菌株对聚3-羟基丁酸酯(PHB)膜进行降解,对降解到不同程度的PHB膜采用扫描电子显微镜观察其表面形态结构的变化,并对其降解产物进行分析测定.结果表明,PHB的生物降解首先发生在PHB表面的非晶部分,随后结晶部分开始降解,并且降解首先发生在球晶的中心部分.DS9701菌株所产生的PHB解聚酶主要降解PHB的第二个酯键,降解产物为二聚体.     

Degradation of poly(3-hydroxybutyrate) by soil streptomycetes

The ability of 64 soil streptomycetes to degrade poly(3-hydroxybutyrate) [P(3HB)] was evaluated on Pridham and Lyons mineral salts agar medium overlayered with the same medium containing 0.2% P(3HB). The streptomycete isolates were grown on this overlayered medium and the degradation was detected by the formation of clear zone surrounding the growth. Four potent degrader isolates identified as species of Streptomyces were selected. Degradation of P(3HB) by these isolates was studied for a period of 8 days. The rate of degradation increased with increase in concentration of P(3HB) in the medium while it decreased with the supplementation of readily utili- zable carbon sources like glucose, fructose and sucrose. All four isolates also degraded the copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB–co–3HV)] in solid medium but to a lesser extent. However, the isolates were equally efficient in degrading P(3HB) in liquid medium.     

Degradation of microbial polyester poly(3-hydroxybutyrate) in environmental samples and in culture

Poly(3-hydroxybutyrate) [P(3HB)] test-pieces prepared from the polymer produced by Azotobacter chroococcum were degraded in natural environments like soil, water, compost and sewage sludge incubated under laboratory conditions. Degradation in terms of % weight loss of the polymer was maximum (45%) in sewage sludge after 200 days of incubation at 30°C. The P(3HB)-degrading bacterial cultures (36) isolated from degraded test-pieces showed different degrees of degradation in polymer overlayer method. The extent of P(3HB) degradation increases up to 12 days of incubation and was maximum at 30°C for majority of the cultures. For most efficient cultures the optimum concentration of P(3HB) for degradation was 0.3% (w/v). Supplementation of soluble carbon sources like glucose, fructose and arabinose reduced the degradation while it was almost unaffected with lactose. Though the cultures degraded P(3HB) significantly, they were comparatively less efficient in utilizing copolymer of 3-hydroxybutyrate and 3-hydroxyvalerate [P(3HB-co-3HV)].     

Biosynthesis and native granule characteristics of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) in Delftia acidovorans

The ability of Delftia acidovorans to incorporate a broad range of 3-hydroxyvalerate (3HV) monomers into polyhydroxyalkanoate (PHA) copolymers was evaluated in this study. Poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB-co-3HV)] containing 0–90 mol% of 3HV was obtained when a mixture of sodium 3-hydroxybutyrate and sodium valerate was used as the carbon sources. Transmission electron microscopy analysis revealed an interesting aspect of the P(3HB-co-3HV) granules containing high molar ratios of 3HV whereby, the copolymer granules were generally larger than those of poly(3-hydroxybutyrate) [P(3HB)] granules, despite having almost the same cellular PHA contents. The large number of P(3HB-co-3HV) granules occupying almost the entire cell volume did not correspond to a higher amount of polymer by weight. This indicated that the granules of P(3HB-co-3HV) contain polymer chains that are loosely packed and therefore have lower density than P(3HB) granules. It was also interesting to note that a decrease in the length of the side chain from 3HV to 4-hydroxybutyrate (4HB) corresponded to an increase in the density of the respective PHA granules. The presence of longer side chain monomers (3HV) in the PHA structure seem to exhibit steric effects that prevent the polymer chains in the granules from being closely packed. The results reported here have important implications on the maximum ability of bacterial cells to accumulate PHA containing monomers with longer side chain length.     

Biosynthesis of flavan-3-ols and other secondary plant products from (2S)phenylalanine

(2S)-Phenyl[2-¹⁴C,3R-³H₁]alanine and (2S)-phenyl[2-¹⁴C,3S-³H₁]alanine have been employed as substrates to study procyanidin and flavan-3-ol biosynthesis. Parallel studies with the cyanogenic glucosides prunasin and sambunigrin, Winterstein's acid [(3R)-3-dimethylaminophenylpropionic acid] and tropic acid show these to be derived by stereospecific processes from (2S)-phenylalanine. New proposals for procyanidin biosynthesis are briefly commented upon.     

需钠弧菌(Vibrio natriegens)合成聚羟基丁酸的研究

研究结果表明,V.natriegens可以利用葡萄糖,果糖,以及糖蜜为碳源合成聚羟基丁酸[Poly(3HB)] ,当以糖蜜为碳源时,积累的Poly(3HB)达到细胞干重的28．4％,实验结果还表明,Poly(3HB)的积累滞后于细胞生长,在培养前加入过量的碳源,不仅没有Poly(3HB)积累,还抑制细胞的生长,测定了与Poly(3HB)合成相关的PHA聚合酶,β-酮硫解酶和乙酰乙酰CoA还原酶的活性。结果表明,伴随Poly(3HB)合成,PHA聚合酶活性从无到有,β－酮硫解酶活性提高了10倍以上。进一步通过利用脂肪酸合成代谢抑制物－浅蓝菌素（cerulenin),研究了脂肪酸从头合成途径与Poly(3HB)合成途径的关系。发现浅蓝菌素能够明显降低细胞Poly(3HB)的累积。根据以上结果,推测在V.natrigens中可能存在两条代谢途径参与Poly(3HB)的合成。