Valorization of Dairy Wastes: Integrative Approaches for Value Added Products

The era of rapid industrialization succeeded by a shift in organizational focus on research and technology development which has fueled many industries along with the dairy industry to grow at an exponential rate. The dairy industry has achieved remarkable growth in the last decade in India. Waste produced by dairy industry consists of a high organic load thus cannot be discharged untreated. Even though treatment and management of waste are well documented, but the main problem is concerned with sludge produced after treatment. There is a gap in the application of various methods for effective treatment of the waste, hence there is a need for technology-oriented research in this area because of a paradigm shift in perspectives towards sustainable management of waste to recover value added products including energy as energy demand is also rising. Sludge which is generally land spread can also be used for energy generation. This paper discusses the environmental effects of waste generated due to dairy industrial activities; various methods used for the advanced treatment of dairy waste. This review article aims to present and discuss the state-of-art information for recovery of value-added products (single cell protein, biofertilizers, biopolymers and biosurfactants) from dairy waste with emphasis on integration of technologies for environmental sustainability. This paper also includes challenges and future perspectives in this field.     

Life cycle assessment (LCA) of industrial milk production

A Life Cycle Assessment (LCA) was carried out for milk production extending from the origin of the inputs to the agricultural step to the consumer phase and the waste management of the packaging. Three Norwegian dairies of different sizes and degree of automation were studied. The main objectives were to find any hot spots in the life cycle of milk, to determine the significance of the dairy size and degree of automation, and to study the influence of transport. The agriculture was found to be the main hot spot for almost all the environmental themes studied, although the dairy processing, packaging, consumer phase and waste management were also of importance. The consumer phase was the main contributor to photo-oxidant formation and important regarding eutrophication. The small dairy was found to have a greater environmental impact than the middle-sized and the largest dairies. The transport did not have any major influence.     

Animal husbandry: the period 1973-1995

In the last decade the intensification of the pig and poultry industries has continued with increases in production unit size and in efficiency. This has come about as a response to rising costs, competition and reasonable end-product prices. The dairy industry has also expanded output through increasing milk yield per cow, encouraged by favourable market support. However, efficiency of feed conversion to milk production is still not directly selected for in dairy cattle. Developments in beef cattle have been away from intensive systems of production in an effort to reduce capital expenditure and increases in sheep productivity have been largely through increased stocking rates, greater fertilizer use and better grazing systems. In the next decade there are many feasible technological advances awaiting application. The use of computer simulation is likely to assist in predicting quantitative and qualitative body compositional responses to nutrition and in increasing the efficiency of grass utilization, while microprocessor technology will be developed into artificial aids to the stockman. Studies of reproductive physiology will continue to help increase output, especially with pigs and sheep. The building of sophisticated housing is likely to be justified for pigs, poultry, dairy cattle and calves, but not for suckler beef and sheep. There is likely to be greater use of centralized breeding schemes for dairy cattle, beef cattle and sheep. The future application of technology will be limited by a number of socio-economic factors. For example, the use of milk quotas to control surplus production will act as a powerful economic constraint to increased milk production and the growing public concern over animal welfare, pollution and health aspects of animal produce will exert increasing pressure on certain systems of production.     

Cattle feed or bioenergy? Consequential life cycle assessment of biogas feedstock options on dairy farms

On‐farm anaerobic digestion (AD) of wastes and crops can potentially avoid greenhouse gas (GHG) emissions, but incurs extensive environmental effects via carbon and nitrogen cycles and substitution of multiple processes within and outside farm system boundaries. Farm models were combined with consequential life cycle assessment (CLCA) to assess plausible biogas and miscanthus heating pellet scenarios on dairy farms. On the large dairy farm, the introduction of slurry‐only AD led to reductions in global warming potential (GWP) and resource depletion burdens of 14% and 67%, respectively, but eutrophication and acidification burden increases of 9% and 10%, respectively, assuming open tank digestate storage. Marginal GWP burdens per Mg dry matter (DM) feedstock codigested with slurry ranged from –637 kg CO₂e for food waste to +509 kg CO₂e for maize. Codigestion of grass and maize led to increased imports of concentrate feed to the farm, negating the GWP benefits of grid electricity substitution. Attributing grass‐to‐arable land use change (LUC) to marginal wheat feed production led to net GWP burdens exceeding 900 kg CO₂e Mg^?1 maize DM codigested. Converting the medium‐sized dairy farm to a beef‐plus‐AD farm led to a minor reduction in GWP when grass‐to‐arable LUC was excluded, but a 38% GWP increase when such LUC was attributed to marginal maize and wheat feed required for intensive compensatory milk production. If marginal animal feed is derived from soybeans cultivated on recently converted cropland in South America, the net GWP burden increases to 4099 kg CO₂e Mg^?1 maize DM codigested – equivalent to 55 Mg CO₂e yr^?1 per hectare used for AD‐maize cultivation. We conclude that AD of slurry and food waste on dairy farms is an effective GHG mitigation option, but that the quantity of codigested crops should be strictly limited to avoid potentially large international carbon leakage via animal feed displacement.     

Does increasing milk yield per cow reduce greenhouse gas emissions? A system approach

Milk yield per cow has continuously increased in many countries over the last few decades. In addition to potential economic advantages, this is often considered an important strategy to decrease greenhouse gas (GHG) emissions per kg of milk produced. However, it should be considered that milk and beef production systems are closely interlinked, as fattening of surplus calves from dairy farming and culled dairy cows play an important role in beef production in many countries. The main objective of this study was to quantify the effect of increasing milk yield per cow on GHG emissions and on other side effects. Two scenarios were modelled: constant milk production at the farm level and decreasing beef production (as co-product; Scenario 1); and both milk and beef production kept constant by compensating the decline in beef production with beef from suckler cow production (Scenario 2). Model calculations considered two types of production unit (PU): dairy cow PU and suckler cow PU. A dairy cow PU comprises not only milk output from the dairy cow, but also beef output from culled cows and the fattening system for surplus calves. The modelled dairy cow PU differed in milk yield per cow per year (6000, 8000 and 10 000 kg) and breed. Scenario 1 resulted in lower GHG emissions with increasing milk yield per cow. However, when milk and beef outputs were kept constant (Scenario 2), GHG emissions remained approximately constant with increasing milk yield from 6000 to 8000 kg/cow per year, whereas further increases in milk yield (10 000 kg milk/cow per year) resulted in slightly higher (8%) total GHG emissions. Within Scenario 2, two different allocation methods to handle co-products (surplus calves and beef from culled cows) from dairy cow production were evaluated. Results showed that using the 'economic allocation method', GHG emissions per kg milk decreased with increasing milk yield per cow per year, from 1.06 kg CO2 equivalents (CO2eq) to 0.89 kg CO2eq for the 6000 and 10 000 kg yielding dairy cow, respectively. However, emissions per kg of beef increased from 10.75 kg CO2eq to 16.24 kg CO2eq due to the inclusion of suckler cows. This study shows that the environmental impact (GHG emissions) of increasing milk yield per cow in dairy farming differs, depending upon the considered system boundaries, handling and value of co-products and the assumed ratio of milk to beef demand to be satisfied.     

Life cycle assessment of a detailed dairy processing model and recommendations for the allocation to single products

Purpose

This study analyses the environmental impacts referring to dairy products and to the operation of a dairy. The study aims to better understand different process stages in a dairy operation. This analysis can be used to improve the flows of energy, water, and materials in the dairy operation. The results are also used to suggest an improved allocation model for assigning the impacts of operation to single dairy products.

Methods

The analysis is based on a detailed, product-specific model calculation for the use of energy, water, and chemicals for more than 40 subprocesses of a dairy operation. This model has been used to elaborate the life cycle inventory for a detailed life cycle assessment study. The environmental impacts are analyzed from cradle to gate including and excluding the raw milk input. The environmental impacts are assessed with the midpoint indicators suggested by the International Reference Life Cycle Data System. Finally, results of this study are compared with an allocation model recommended for life cycle assessment (LCA) studies on milk products.

Results and discussion

The analysis of the model dairy shows that raw milk production has the main impact in all categories. Consumer packaging has the second biggest impact in many categories. The detailed dairy processing model allows the assignment of inputs and outputs for each subprocess to single dairy products and thus avoids allocation largely. The analysis of inputs to different dairy products per kilogram shows that ultra-high-temperature (UHT)-processed milk uses more chemicals for cleaning compared to the other products. Cream uses more electricity and heat compared to UHT milk and to yogurt.

Conclusions

A detailed discussion shows the overlaps and differences found for the allocation of inputs to the milk processing to final dairy products. Allocation models for different types of inputs are partly confirmed by the detailed theoretical model used for this LCA. The allocation of chemicals, steam, and electricity to single products can be improved based on the detailed dairy model developed in this study.

     

System expansion and allocation in life cycle assessment of milk and beef production

Background, Goal and Scope  System expansion is a method used to avoid co-product allocation. Up to this point in time it has seldom been used in LCA studies of food products, although food production systems often are characterised by closely interlinked sub-systems. One of the most important allocation problems that occurs in LCAs of agricultural products is the question of how to handle the co-product beef from milk production since almost half of the beef production in the EU is derived from co-products from the dairy sector. The purpose of this paper is to compare different methods of handling co-products when dividing the environmental burden of the milk production system between milk and the co-products meat and surplus calves. Main Features  This article presents results from an LCA of organic milk production in which different methods of handling the co-products are examined. The comparison of different methods of co-product handling is based on a Swedish LCA case study of milk production where economic allocation between milk and meat was initially used. Allocation of the co-products meat and surplus calves was avoided by expanding the milk system. LCA data were collected from another case study where the alternative way of producing meat was analysed, i.e. using a beef cow that produces one calf per annum to be raised for one and a half year. The LCA of beef production was included in the milk system. A discussion is conducted focussing on the importance of modelling and analysing milk and beef production in an integrated way when foreseeing and planning the environmental consequences of manipulating milk and beef production systems. Results  This study shows that economic allocation between milk and beef favours the product beef. When system expansion is performed, the environmental benefits of milk production due to its co-products of surplus calves and meat become obvious. This is especially connected to the impact categories that describe the potential environmental burden of biogenic emissions such as methane and ammonia and nitrogen losses due to land use and its fertilising. The reason for this is that beef production in combination with milk can be carried out with fewer animals than in sole beef production systems. Conclusion, Recommendation and Perspective  Milk and beef production systems are closely connected. Changes in milk production systems will cause alterations in beef production systems. It is concluded that in prospective LCA studies, system expansion should be performed to obtain adequate information of the environmental consequences of manipulating production systems that are interlinked to each other.     

Environmental life cycle assessment of a dairy product: the yoghurt

Purpose

The dairy sector covers multiple activities related to milk production and treatment for alimentary uses. Different dairy products are available in the markets, with yoghurt being the second most important in terms of production. The goal of this study was to analyse from a cradle-to-grave approach the environmental impacts and energy balance derived from the yoghurt (solid, stirred and drinking yoghurts) manufacture process in a specific dairy factory processing 100 % Portuguese raw milk.

Methods

The standard framework of life cycle assessment (LCA) was followed and inventory data were collected on site in the dairy factory and completed using the literature and databases. The following impact categories were evaluated adopting a CML method: abiotic depletion (ADP), acidification (AP), eutrophication (EP), global warming (GWP), ozone layer depletion (ODP), land competition (LC) and photochemical oxidants formation (POFP), with the energy analysis carried out based on the cumulative non-renewable fossil and nuclear energy demand (CED). A mass allocation approach was considered for the partitioning of the environmental burdens between the different products obtained since not only yoghurts are produced but also dairy fodder.

Results and discussion

The key processes from an environmental point of view were identified. Some of the potential results obtained were in line with other specific related studies where dairy systems were assessed from an LCA perspective. The production of the milk-based inputs (i.e. raw milk, concentrated and powdered milk) was the main factor responsible of the environmental loads and energy requirements, with remarkable contributions of 91 % of AP, 92 % of EP and 62 % of GWP. Other activities that have important environmental impacts include the production of the energy requirements in the dairy factory, packaging materials production and retailing. Potential alternatives were proposed in order to reduce the contributions to the environmental profile throughout the life cycle of the yoghurt. These alternatives were based on the minimisation of milk losses, reductions of distances travelled and energy consumption at retailing and household use, as well as changes to the formulation of the animal feed. All of these factors derived from light environmental reductions.

Conclusions

The main reductions of the environmental impact derived from yoghurt production can be primarily obtained at dairy farms, although important improvements could also be made at the dairy factory.     

Effects of pressed beet pulp silage inclusion in maize-based rations on performance of high-yielding dairy cows and parameters of rumen fermentation

Beet pulp contains high amounts of pectins that can reduce the risk of rumen disorders compared to using feedstuffs high in starch. The objective was to study the effects of inclusion of ensiled pressed beet pulp in total mixed rations (TMR) for high-yielding dairy cows. Two TMR containing no or about 20% (on dry matter (DM) basis) beet pulp silage were used. The beet pulp silage mainly replaced maize silage and corn cob silage. The TMR were intentionally equal in the concentrations of energy and utilisable crude protein (CP) at the duodenum. TMR were fed to 39 and 40 dairy cows, respectively, for 118 days. The average daily milk yield was about 43 kg/day. No significant differences in milk yield and milk fat or milk protein content were detected. DM intake of cows was significantly reduced by the inclusion of beet pulp silage (23.0 v. 24.5 kg/day). However, a digestibility study, separately conducted with sheep, showed a significantly higher organic matter digestibility and metabolisable energy concentration for the TMR that contained beet pulp silage. In vitro gas production kinetics indicated that the intensity of fermentation was lower in the TMR that contained beet pulp silage. In vitro production of short-chain fatty acids, studied using a Rusitec, did not differ between the TMR. However, the inclusion of beet pulp silage in the ration caused a significant reduction in the efficiency of microbial CP synthesis in vitro. The amino acid profile of microbial protein remained unchanged. It was concluded that beet pulp silage has specific effects on ruminal fermentation that may depress feed intake of cows but improve digestibility. An inclusion of beet pulp silage of up to 20% of DM in rations for high-yielding dairy cows is possible without significant effects on milk yield and milk protein or milk fat.     

Global environmental costs of China's thirst for milk

China has an ever‐increasing thirst for milk, with a predicted 3.2‐fold increase in demand by 2050 compared to the production level in 2010. What are the environmental implications of meeting this demand, and what is the preferred pathway? We addressed these questions by using a nexus approach, to examine the interdependencies of increasing milk consumption in China by 2050 and its global impacts, under different scenarios of domestic milk production and importation. Meeting China's milk demand in a business as usual scenario will increase global dairy‐related (China and the leading milk exporting regions) greenhouse gas (GHG) emissions by 35% (from 565 to 764 Tg CO_2eq) and land use for dairy feed production by 32% (from 84 to 111 million ha) compared to 2010, while reactive nitrogen losses from the dairy sector will increase by 48% (from 3.6 to 5.4 Tg nitrogen). Producing all additional milk in China with current technology will greatly increase animal feed import; from 1.9 to 8.5 Tg for concentrates and from 1.0 to 6.2 Tg for forage (alfalfa). In addition, it will increase domestic dairy related GHG emissions by 2.2 times compared to 2010 levels. Importing the extra milk will transfer the environmental burden from China to milk exporting countries; current dairy exporting countries may be unable to produce all additional milk due to physical limitations or environmental preferences/legislation. For example, the farmland area for cattle‐feed production in New Zealand would have to increase by more than 57% (1.3 million ha) and that in Europe by more than 39% (15 million ha), while GHG emissions and nitrogen losses would increase roughly proportionally with the increase of farmland in both regions. We propose that a more sustainable dairy future will rely on high milk demanding regions (such as China) improving their domestic milk and feed production efficiencies up to the level of leading milk producing countries. This will decrease the global dairy related GHG emissions and land use by 12% (90 Tg CO_2eq reduction) and 30% (34 million ha land reduction) compared to the business as usual scenario, respectively. However, this still represents an increase in total GHG emissions of 19% whereas land use will decrease by 8% when compared with 2010 levels, respectively.     

Importance of the methanogenic archaea populations in anaerobic wastewater treatments

Methane derived from anaerobic treatment of organic wastes has a great potential to be an alternative fuel. Abundant biomass from various industries could be a source for biomethane production where combination of waste treatment and energy production would be an advantage. This article summarizes the importance of the microbial population, with a focus on the methanogenic archaea, on the anaerobic fermentative biomethane production from biomass. Types of major wastewaters that could be the source for biomethane generation such as brewery wastewater, palm oil mill effluent, dairy wastes, cheese whey and dairy wastewater, pulp and paper wastewaters and olive oil mill wastewaters in relevance to their dominant methanogenic population are fully discussed in this article.     

The relationship between the stockperson's personality and attitudes and the productivity of dairy cows

This study investigated the relationships amongst personality traits and attitudes of 311 dairy stockpeople and the milk yield they obtained. A questionnaire pack consisting of a big-five measure of personality (which includes the traits of extraversion, agreeableness, conscientiousness, emotional stability and intellect), a four-factor attitude questionnaire and associated demographic and production questions was posted out to Northern Ireland dairy farmers. Pearson correlations were used to assess the relationship between personality and attitudes and partial correlations were calculated between milk yield and these psychometric measures. The personality traits of agreeableness and conscientiousness were most strongly correlated to positive attitudes towards working with dairy cows. None of the stockpeople's personality traits were significantly correlated with the milk yield they obtained. Three of the attitude scales, however, were significantly correlated with milk yield; milk yield was related to higher levels of empathy and job satisfaction and lower levels of negative beliefs. These findings, along with previous research, suggest stockperson attitudes may be important in relation to dairy cow welfare and production.     

A review of environmental life cycle assessment studies examining cheese production

Purpose

Cheese is one of the world’s most widely consumed dairy products and its popularity is ever growing. However, as concerns for the environmental impact of industries increase, products like cheese, which have a significant environmental impact, may lose their popularity. A commonly used technique to assess the environmental impact of a product is life cycle assessment (LCA). In this paper, a state-of-the-art review of LCA studies on the environmental impact of cheese production is presented.

Methods

Sixteen LCA studies, which explored the impact from the production of a variety of cheese types (fresh, mature and semi-hard) were examined and discussed. The four stages of the LCA were examined and the range of results of selected environmental impact categories (global warming potential, acidification potential and eutrophication potential) were detailed and discussed.

Results and discussion

For each of these environmental impact categories, raw milk production was consistently found to be the most significant contributor to the total impact, which was followed by processing. It was found that allocation between cheese and its by-products was crucial in determining the impact of cheese production and standardisation or guidelines may be needed. Very little information relating to wastewater treatment system and processes were reported and this leads to inaccurate environmental impact modelling relating to these aspects of the manufacture of cheese. Very few studies included the design of packaging in terms of reducing food waste, which may significantly contribute to the overall environmental impact.

Conclusions

As raw milk production was found to have the greatest contribution to environmental impact, mitigation strategies at farm-level, particularly in relation to enteric fermentation and manure management, need to be implemented. Additionally, based on the literature, there is a suggestion that fresh cheese has less of an environmental impact than semi-hard cheeses, particularly when examining direct energy consumption. However, there needs to be more case studies investigated to justify this statement.

     

Whey valorisation: A complete and novel technology development for dairy industry starter culture production

Whey is the major by-product of the dairy industry, produced in large quantities and usually disposed off causing major environmental pollution, due to its high organic load that makes treatment cost prohibitive. This paper comprises a contribution on the valorisation of this high polluting liquid waste of the dairy industry, based on research for the production of novel dairy starter cultures using whey as raw material. Starter cultures are used for cheese ripening in order to: (i) accelerate ripening, (ii) improve quality and (iii) increase shelf-life. The developed technology involves biomass production from whey followed by thermal drying of cultures. Specifically, Kluyveromyces marxianus, Lactobacillus bulgaricus and kefir yeasts were thermally dried, and their efficiency in lactose and milk whey fermentations was studied. The most suitable culture regarding its technological properties was kefir, which was used for cheese ripening in freeze-dried and thermally dried form. Besides the reduction of production cost, which is an essential requirement for the food industry, the use of thermally dried kefir displayed several other advantages such as acceleration of ripening, increase of shelf-life, and improvement of hard-type cheese quality.     

A holistic approach to managing palm oil mill effluent (POME): biotechnological advances in the sustainable reuse of POME

During the last century, a great deal of research and development as well as applications has been devoted to waste. These include waste minimization and treatment, the environmental assessment of waste, minimization of environmental impact, life cycle assessment and others. The major reason for such huge efforts is that waste generation constitutes one of the major environmental problems where production industries are concerned. Until now, an increasing pressure has been put on finding methods of reusing waste, for instance through cleaner production, thus mirroring rapid changes in environmental policies. The palm oil industry is one of the leading industries in Malaysia with a yearly production of more than 13 million tons of crude palm oil and plantations covering 11% of the Malaysian land area. However, the production of such amounts of crude palm oil result in even larger amounts of palm oil mill effluent (POME), estimated at nearly three times the quantity of crude palm oil. Normally, POME is treated using end-of-pipe processes, but it is worth considering the potential value of POME prior to its treatment through introduction of a cleaner production. It is envisaged that POME can be sustainably reused as a fermentation substrate in the production of various metabolites, fertilizers and animal feeds through biotechnological advances. The present paper thus discusses various technically feasible and economically beneficial means of transforming the POME into low or preferably high value added products.     

Canola Oil in Lactating Dairy Cow Diets Reduces Milk Saturated Fatty Acids and Improves Its Omega-3 and Oleic Fatty Acid Content

To produce milk that is healthier for human consumption, the present study evaluated the effect of including canola oil in the diet of dairy cows on milk production and composition as well as the nutritional quality of this milk fat. Eighteen Holstein cows with an average daily milk yield of 22 (± 4) kg/d in the middle stage of lactation were used. The cows were distributed in 6 contemporary 3x3 Latin squares consisting of 3 periods and 3 treatments: control diet (without oil), 3% inclusion of canola oil in the diet and 6% inclusion of canola oil in the diet (dry matter basis). The inclusion of 6% canola oil in the diet of lactating cows linearly reduced the milk yield by 2.51 kg/d, short-chain fatty acids (FA) by 41.42%, medium chain FA by 27.32%, saturated FA by 20.24%, saturated/unsaturated FA ratio by 39.20%, omega-6/omega-3 ratio by 39.45%, and atherogenicity index by 48.36% compared with the control treatment. Moreover, with the 6% inclusion of canola oil in the diet of cows, there was an increase in the concentration of long chain FA by 45.91%, unsaturated FA by 34.08%, monounsaturated FA by 40.37%, polyunsaturated FA by 17.88%, milk concentration of omega-3 by 115%, rumenic acid (CLA) by 16.50%, oleic acid by 44.87% and h/H milk index by 94.44% compared with the control treatment. Thus, the inclusion of canola oil in the diet of lactating dairy cows makes the milk fatty acid profile nutritionally healthier for the human diet; however, the lactating performance of dairy cows is reduce.     

Localising livestock protein feed production and the impact on land use and greenhouse gas emissions

Livestock farmers in Sweden usually grow feed grains for livestock but import protein feed from outside Sweden. Aside from the economic implications, some environmental issues are associated with this practice. We used life cycle assessment to evaluate the impact of local protein feed production on land use and greenhouse gas emissions, compared with the use of imported protein feed, for pig meat and dairy milk produced in Sweden. Our results showed that local production reduced greenhouse gas emissions by 4.5% and 12%, respectively, for pigs and dairy cows. Land use for feed production in Sweden increased by 11% for pigs and 25% for dairy cows, but total land use decreased for pig production and increased for dairy milk production. Increased protein feed cultivation in Sweden decreased inputs needed for animal production and improved some ecological processes (e.g. nutrient recycling) of the farm systems. However, the differences in results between scenarios are relatively small and influenced to an extent by methodological choices such as co-product allocation. Moreover, it was difficult to assess the contribution of greenhouse emissions from land use change. The available accounting methods we applied did not adequately account for the potential land use changes and in some cases provided conflicting results. We conclude that local protein feed production presents an opportunity to reduce greenhouse gas emissions but at a cost of increasing land occupation in Sweden for feed production.     

Utilization of salt-rich by-products from the dairy industry as feedstock for recombinant protein production by Debaryomyces hansenii

The dairy industry processes vast amounts of milk and generates high amounts of secondary by-products, which are still rich in nutrients (high Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) levels) but contain high concentrations of salt. The current European legislation only allows disposing of these effluents directly into the waterways with previous treatment, which is laborious and expensive. Therefore, as much as possible, these by-products are reutilized as animal feed material and, if not applicable, used as fertilizers adding phosphorus, potassium, nitrogen, and other nutrients to the soil. Finding biological alternatives to revalue dairy by-products is of crucial interest in order to improve the utilization of dry dairy matter and reduce the environmental impact of every litre of milk produced. Debaryomyces hansenii is a halotolerant non-conventional yeast with high potential for this purpose. It presents some beneficial traits – capacity to metabolize a variety of sugars, tolerance to high osmotic environments, resistance to extreme temperatures and pHs – that make this yeast a well-suited option to grow using complex feedstock, such as industrial waste, instead of the traditional commercial media. In this work, we study for the first time D. hansenii's ability to grow and produce a recombinant protein (YFP) from dairy saline whey by-products. Cultivations at different scales (1.5, 100 and 500 ml) were performed without neither sterilizing the medium nor using pure water. Our results conclude that D. hansenii is able to perform well and produce YFP in the aforementioned salty substrate. Interestingly, it is able to outcompete other microorganisms present in the waste without altering its cell performance or protein production capacity.