Ultrastructure and the importance of wear in the dentition of the halfbeak (Pisces: Hemiramphidae) pharyngeal mill

To assess how tooth microstructure and composition might facilitate the pharyngeal mill mechanism of halfbeaks, apatite structure and iron content were determined by scanning electron microscopy and energy dispersive X‐ray analysis for Hyporhamphus regularis ardelio, Arrhamphus sclerolepis krefftii, and Hemiramphus robustus. Iron was present in developing teeth and was concentrated along the shearing edge of spatulate incisiform teeth, which dominate the occlusive wear zone in all three species. A model based on tooth structure and wear rate is proposed to explain how halfbeaks maintain a fully functional occlusion zone throughout growth and consequent tooth addition and replacement. Replacement teeth erupt and wear rapidly so that a constant occlusion plane is always present. Iron within the tooth tissue reduces the wear rate of the cutting edge while simultaneously maintaining its sharpness and efficiency. J. Morphol. 2009. © 2008 Wiley‐Liss, Inc.     

Anatomy of a hemiramphid pharyngeal mill with reference to Arrhamphus sclerolepis krefftii (Steindachner) (Teleostei: Hemiramphidae)

The structure and function of the pharyngeal jaw apparatus (PJA) and postpharyngeal alimentary tract of Arrhamphus sclerolepis krefftii, an herbivorous hemiramphid, were investigated by dissection, light and scanning electron microscopy, and X-ray analysis of live specimens. A simple model of PJA operation is proposed, consisting of an adductive power stroke of the third pharyngobranchial that draws it posteriorly while the fifth ceratobranchial is adducted, and a return stroke in which the third pharyngobranchial bone is drawn anteriorly during abduction of the fifth ceratobranchial. Teeth in the posteromedial region of the PJA are eroded into an occlusion zone where the teeth of the third pharyngobranchial are spatulate incisiform and face posteriorly in opposition to the rostrally oriented spatulate incisiform teeth in the wear zone of the fifth ceratobranchial. The shape of the teeth and their pedestals (bone of attachment) is consistent with the model and with the forces likely to operate on the elements of the PJA during mastication. The role of pharyngeal tooth replacement in maintaining the occlusal surfaces in the PJA during growth is described. The postpharyngeal alimentary tract of A. sclerolepis krefftii comprises a stomachless cylinder that attenuates gradually as it passes straight to the anus, interrupted only by a rectal valve. The ratio of gut length to standard length is about 0.5. Despite superficial similarities to the cichlid PJA (Stiassny and Jensen [1987] Bull Mus Comp Zool 151:269-319), the hemiramphid PJA differs in the fusion of the third pharyngobranchial bones, teeth in the second pharyngobranchials and the fifth ceratobranchial face anteriorly, the presence of a slide-like diarthroses between the heads of the fourth epibranchials and the third pharyngobranchial, the occlusion zone of constantly wearing teeth, and the unusual form of the muscularis craniopharyngobranchialis. The functional relationship between these structures is explained and the consequence for the fish of a complex PJA and a simple gut is discussed.     

Functional morphology of digestion in the stomachless,piscivorous needlefishes Tylosurus gavialoides and Strongylura leiura ferox (Teleostei: Beloniformes)

Belonidae are unusual in that they are carnivorous but lack a stomach and have a straight, short gut. To develop a functional morphological model for this unusual system the gut contents and alimentary tract morphology of Tylosurus gavialoides and Strongylura leiura ferox were investigated. The posterior orientation of the majority of the pharyngeal teeth supports the swallowing of whole large prey, but not their mastication. Mucogenic cells are abundant in the mucosa lining, particularly the esophagus, and their secretions are likely to protect the gut lining from damage while lubricating passage of the prey. Esophagus, anterior intestine, posterior intestine, and rectum all have highly reticulate mucosae. The anterior three gut sections are distensible to accommodate the passage of prey. However, following ingestion large prey are passed to the highly distensible posterior intestine where they rest head first against the ileorectal valve. Alimentary pH ranges from neutral to weakly acidic. Fish prey is digested head first with the head being largely digested while the remainder of the body is still intact. The nondistensibility of the rectum and the small aperture provided by the ileorectal valve suggest the products of intestinal digestion are either small particulates or fluids that pass into rectum where they are absorbed. J. Morphol. 2009. © 2009 Wiley‐Liss, Inc.     

Pharyngeal jaw morphology and homology in Sicydiine Gobies (Teleostei: Gobiidae) and allies

An extremely large number of fifth ceratobranchial teeth, with highly modified, striated, and hooked tips were observed in the central and western Pacific sicydiine goby genus Stiphodon.A scanning electron microscopic study of the form and arrangement of fifth ceratobranchial teeth was conducted to assess the distribution of these modifications in sicydiine gobies and their putative close relatives. Our goals were to explore a new set of characters in gobioid systematics, to test sicydiine monophyly, and to test hypotheses of relationships of sicydiine gobies. Sicydiines are hypothesized herein to be most closely related to the western Pacific Tukugobius and Rhinogobius,freshwater genera with which they share thickened pelvic-fin rays, no teeth on the anterior portion of the fifth ceratobranchial bones, fifth ceratobranchial teeth with differentiated and striated tips, and overlapping anterior rami of the fifth ceratobranchial bones. The latter two characters occur in some, but not all, sicydiines. The pantropical freshwater goby Awaous,often classified with sicydiines, is not considered the closest relative of the subfamily. The highly modified fifth ceratobranchials of Stiphodon are similar to, and concluded here to be homoplasious with, those of the mudflat-dwelling New World goby Evorthodus and the Indo-west Pacific oxudercine gobies, represented in this study by Pseudapocryptes. J. Morphol. 237:257–274, 1998. Published 1998 Wiley-Liss, Inc.     

Morphological analysis of the pharyngeal jaws in two populations of Lebias fasciata Valenciennes, 1821 (Teleostei: Cyprinodontidae)

The study of the pharyngeal jaws in two geographically isolated Italian populations of Lebias fasciata indicated the presence of two phenotypes: the Adriatic phenotype with a large ceratobranchial V and upper and lower pharyngeal jaws bearing few large teeth and the Sicilian phenotype with a smaller ceratobranchial V and pharyngeal jaws with smaller and more numerous teeth. The morphological variations of pharyngeal jaws should be interpreted as a result of the geographical isolation of these two populations. J. Morphol. 241:107–114, 1999. © 1999 Wiley‐Liss, Inc.     

广西南宁渐新世基于咽齿的鲤亚科一新属

记述了产自广西南宁盆地渐新世早—中期的鲤科鲤亚科一新属种——伍氏南宁鲤(+Nanningocyprinus wui gen.et sp.nov).化石材料包括一些咽喉骨和咽齿.这些咽喉骨和咽齿的以下特征组合明显不同于其他鲤科鱼类:齿式-3·2·1,主行第一枚咽齿大小是第二枚的3～4倍,第二枚咽齿及第二行第一枚咽齿咀嚼面上各仅有一条沟纹,咽骨前角很发育.该属种的发现进一步证明鲤亚科是鲤科中较早的分支,中国南方很有可能是鲤亚科的起源和分化中心.     

Unique features of pedicellate attachment of the upper jaw teeth in the adult gobiid fish Sicyopterus japonicus (Teleostei,Gobiidiae): Morphological and structural characteristics and development

Sicyopterus japonicus (Teleostei, Gobiidae), a hill‐stream herbivorous gobiid fish, possesses an unusual oral dentition among teleost fishes on account of its feeding habitat. By using scanning electron microscopy, light microscopy, and transmission electron microscopy, including vital staining with tetracycline, we examined the development of the attachment tissues of the upper jaw teeth in this fish. The functional teeth of S. japonicus had an asymmetrical dentine shaft. The dentine shaft attached to the underlying uniquely shaped pedicel by means of two different attachment mechanisms. At the lingual base, collagen fiber bundles connected the dentine shaft with the pedicel (hinged attachment), whereas the labial base articulated with an oval‐shaped projection of the pedicel (articulate attachment). The pedicel bases were firmly ankylosed to the crest of the thin flange of porous spongy bone on the premaxillary bone, which afforded a flange‐groove system on the labial surface of the premaxillary bone. Developmentally, the pedicel and thin flange of spongy bone were completely different mineralized attachment tissues. The pedicel had a dual origin, i.e., the dental papilla cells, which differentiated into odontoblasts that constructed the internal surface of the pedicel, and the mesenchymal cells, which differentiated into osteoblasts that formed the outer face of the pedicel. A thin flange of spongy bone was deposited on the superficial resorbed labial side of the premaxillary bone proper, and later rapid bone remodeling proceeded toward the pedicel base. These unique features of pedicellate tooth attachment for the upper jaw teeth in the adult S. japonicus are highly modified teeth for enhancing the ability of individual functional teeth to move closely over irregularities in the rock surfaces during the scraping of algae. J. Morphol., 2013. © 2012 Wiley Periodicals, Inc.     

Trophic morphology of the coral-associated genus Gobiodon (Teleostei: Gobiidae) from the Red Sea

Trophic morphology plays a major role in niche diversification among the highly diverse fish fauna of coral reefs. It gives insight into feeding types and is useful in taxonomy, as it can be used to differentiate between species and to estimate phylogenetic relationships. The gobiid genus Gobiodon comprises obligate coral dwelling species that are widespread on Red Sea and Indo-Pacific reefs. Yet very little is known about their ecology and behaviour of feeding. In this study, viscerocranial and oral jaw morphology was investigated in seven species of Gobiodon that occur in the Red Sea. Osteological analyses were carried out on enzyme cleared and alizarin red stained specimens. Shape variation of the viscerocranium was analyzed using a landmark-based geometric morphometric method on digital scans of hand drawings and visualized in thin-plate splines. Shape was determined by placing landmarks on skeletal elements in their articulated state. Morphology of the dentary and premaxilla was examined in further detail after disarticulation. A combination of landmarks and semilandmarks was applied to digital photographs of the oral jaws. It was shown that orbit size influences viscerocranial morphology by delimiting the lower jaw articulation angle. The premaxilla differs both in its extent and direction of curvature and in the structure of the articular process. Form changes in the dentary are mainly caused by variation of curvature and depth. A significant relationship between oral jaw shape and the number of anterior rows of teeth was found. Morphological diversity of selected elements is used to generate hypotheses concerning the trophic biology and niche diversification of Gobiodon . Brief dietary and in situ behavioural observations were carried out to further develop and test hypotheses.     

Tooth wear and dental pathology at the advent of agriculture: new evidence from the Levant

Differences in patterns of diet and subsistence through the analysis of dental pathology and tooth wear were studied in skeletal populations of Natufian hunter-gatherers (10,500-8300 BC) and Neolithic populations (8300-5500 BC, noncalibrated) from the southern Levant. 1,160 Natufians and 804 Neolithic teeth were examined for rate of attrition, caries, antemortem tooth loss, calculus, periapical lesions, and periodontal processes. While the Natufian people manifest a higher rate of dental attrition and periodontal disease (36.4% vs. 19%), Neolithic people show a higher rate of calculus. Both populations manifested low and similar rates of caries (6.4% in the Natufian vs. 6.7% in the Neolithic), periapical lesions (not over 1.5%), and antemortem tooth loss (3.7% vs. 4.5%, respectively). Molar wear pattern in the Neolithic is different than in the Natufian. The current study shows that the dental picture obtained from the two populations is multifactorial in nature, and not exclusively of dietary origin, i.e., the higher rate and unique pattern of attrition seen in the Natufian could result from a greater consumption of fibrous plants, the use of pestles and mortars (which introduce large quantities of stone-dust to the food), and/or the use of teeth as a "third hand." The two major conclusions of this study are: 1) The transition from hunting and gathering to a food-producing economy in the Levant did not promote changes in dental health, as previously believed. This generally indicates that the Natufians and Neolithic people of the Levant may have differed in their ecosystem management (i.e., gathering vs. growing grains), but not in the type of food consumed. 2) Changes in food-preparation techniques and nondietary usage of the teeth explain much of the variation in tooth condition in populations before and after the agricultural revolution.     

Enamel microstructure and molar wear in the greater galago,Otolemur crassicaudatus (mammalia,primates)

This study describes the molar enamel microstructure of the greater galago, based on SEM study of four individuals. Galago molar enamel consists primarily of radially oriented Pattern 1 prisms. However, the most superficial enamel is characterized by regions of poorly developed prisms or nonprismatic enamel, and Pattern 3 prisms can be found at depths intermediate and deep to the enamel surface. Orientations of prism long axes relative to wear surfaces differ among functionally distinct regions (cuspal facets, Phase I/II facets, and crushing basins). Consequently, orientations of enamel crystallites relative to these surfaces also differ. Because crystallites are the structural unit involved in enamel abrasion, these differences in orientation may have important effects on molar wear patterns. Crystallite orientations differ most between cuspal facets and Phase I/II facet surfaces. Cuspal facets are characterized by near surface-parallel interprismatic and surface-oblique prismatic crystallites. Previous experimental studies suggest that this arrangement is most resistant to wear when surface-normal (compressive) loads predominate. In contrast, prismatic and interprismatic crystallites intercept Phase I/II facet surfaces obliquely, an arrangement expected to resist abrasion when surface-parallel (shearing) loads predominate. Superficial enamel is preserved at most basin surfaces, indicating that these regions are subject to comparatively little abrasive wear. These results support the hypothesis that galago occlusal enamel is organized so as to resist abrasion of different functional regions, a property that may prove important in maintaining functional efficiency. However, this largely reflects constraints of occlusal topography on a microstructure typical of many mammals and thus does not appear to represent a structural innovation. © 1993 Wiley-Liss, Inc.     

Nonalimentary tooth use in prehistory: an example from early Holocene in Central Sahara (Uan Muhuggiag,Tadrart Acacus,Libya)

Signs of nonalimentary tooth use were observed on the dentition of an adult male from a single burial excavated in an area close to the Uan Muhuggiag rock shelter (Tadrart Acacus, Libya), dated to more than 7800 uncalibrated years BP, that represents the most ancient human remain found in the Libyan Sahara, and provides a first glimpse of human adaptation in the early Holocene of this region. The wear pattern shows large grooves running across the occlusal surfaces of maxillary and mandibular anterior teeth and premolars. The results of macroscopic and microscopic observation, together with scanning electron microscope (SEM) examination and experimental tests, suggest that the microdamage might be due to repeated friction of vegetal fibers, probably as a consequence of basket making, net production, or mat processing. Further data are needed to allow us to distinguish among plant-oriented activities related to food acquisition (e.g., rope and net processing), food storage (e.g., basket making), or domestic handicraft (e.g., mat processing), whose implications may generate different interpretations of sexual division of labor.     

3D morphology of pharyngeal dentition of the genus Capoeta (Cyprinidae): Implications for taxonomy and phylogeny

Capoeta is a herbivorous cyprinid fish genus, widely distributed in water bodies of Western Asia. Recent species show a distinct biogeographic pattern with endemic distribution in large fluvial drainage basins. As other cyprinids, the species of this genus are characterized by the presence of the pharyngeal bone with pharyngeal teeth. Despite this, the detailed morphology of the pharyngeal teeth, its interspecific and topologic variations, and the importance for taxonomy and phylogeny of the genus Capoeta are still not established. For the first time, a detailed comprehensive study of the pharyngeal dentition of 10 Capoeta species has been provided. The morphologic study of the pharyngeal dentition bases on the 3D microtomography and follows the purpose to evaluate the potential taxonomic and phylogenetic signals of these elements, as well as to study interspecific and topologic variations of the pharyngeal teeth. In this study, we propose a new methodology to categorize the studied pharyngeal teeth in 18 shape classes. The results of this study show that the detailed 3D morphology of the pharyngeal teeth is a useful tool for the identification of isolated teeth at the generic and/or specific level and that in certain cases, the tooth position in the teeth rows can be identified. Additionally, the preliminary analysis shows that the morphology of the pharyngeal teeth provides a potential phylogenetic signal. Both these patterns are very important for the taxonomy of cyprinid fishes and especially can be applied to fossil records.     

Variation in dental wear and tooth loss among known‐aged,older ring‐tailed lemurs (Lemur catta): a comparison between wild and captive individuals

Tooth wear is generally an age‐related phenomenon, often assumed to occur at similar rates within populations of primates and other mammals, and has been suggested as a correlate of reduced offspring survival among wild lemurs. Few long‐term wild studies have combined detailed study of primate behavior and ecology with dental analyses. Here, we present data on dental wear and tooth loss in older (>10 years old) wild and captive ring‐tailed lemurs (Lemur catta). Among older ring‐tailed lemurs at the Beza Mahafaly Special Reserve (BMSR), Madagascar (n=6), the percentage of severe dental wear and tooth loss ranges from 6 to 50%. Among these six individuals, the oldest (19 years old) exhibits the second lowest frequency of tooth loss (14%). The majority of captive lemurs at the Indianapolis Zoo (n=7) are older than the oldest BMSR lemur, yet display significantly less overall tooth wear for 19 of 36 tooth positions, with only two individuals exhibiting antemortem tooth loss. Among the captive lemurs, only one lemur (a nearly 29 year old male) has lost more than one tooth. This individual is only missing anterior teeth, in contrast to lemurs at BMSR, where the majority of lost teeth are postcanine teeth associated with processing specific fallback foods. Postcanine teeth also show significantly more overall wear at BMSR than in the captive sample. At BMSR, degree of severe wear and tooth loss varies in same aged, older individuals, likely reflecting differences in microhabitat, and thus the availability and use of different foods. This pattern becomes apparent before “old age,” as seen in individuals as young as 7 years. Among the four “older” female lemurs at BMSR, severe wear and/or tooth loss do not predict offspring survival. Am. J. Primatol. 72:1026–1037, 2010. © 2010 Wiley‐Liss, Inc.     

Severe wear and tooth loss in wild ring-tailed lemurs (Lemur catta): a function of feeding ecology, dental structure, and individual life history

The ring-tailed lemurs at Beza Mahafaly Special Reserve, Madagascar, exhibit a high frequency of severe wear and antemortem tooth loss. As part of a long-term study, we collected dental data on 83 living adult ring-tailed lemurs during 2003 and 2004. Among these individuals, 192 teeth were scored as absent. The most frequently missing tooth position is M1 (24%). As M1 is the first tooth to erupt, its high frequency of absence (primarily a result of wear) is not remarkable. However, the remaining pattern of tooth loss does not correlate with the sequence of eruption. We suggest that this pattern is a function of 1) feeding ecology, as hard, tough tamarind fruit is a key fallback food of ring-tailed lemurs living in gallery forests; 2) food processing, as tamarind fruit is primarily processed in the P3-M1 region of the mouth; and 3) tooth structure, as ring-tailed lemurs possess thin dental enamel. The incongruity between thin enamel and use of a hard, tough fallback food suggests that ring-tailed lemurs living in riverine gallery forests may rely on resources not used in the past. When comparing dental health in the same individuals (n=50) between 2003 and 2004, we found that individual tooth loss can show a rapid increase over the span of one year, increasing by as much as 20%. Despite this rapid loss, individuals are able to survive, sometimes benefiting from unintentional assistance from conspecifics, from which partially processed tamarind fruit is obtained. Although less frequent in this population, these longitudinal data also illustrate that ring-tailed lemurs lose teeth due to damage and disease, similar to other nonhuman primates. The relationship between tooth loss, feeding ecology, dental structure, and individual life history in this population has implications for interpreting behavior based on tooth loss in the hominid fossil record.     

Brief communication: Subvertical grooves on interproximal wear facets from the El Sidrón (Asturias,Spain) Neandertal dental sample

The distribution of subvertical grooves on interproximal wear dental facets from the El Sidrón (Asturias, Spain) Neandertals is described and analyzed. Out of 93 teeth, 64.5% present subvertical grooves, including a high frequency (50%) on the anterior dentition. Contrary to some studies, subvertical grooves from adjacent facets perfectly overlap each other and do not interdigitate, probably forming small channels. Both the facet and the groove surface share the same polished appearance, suggesting a common origin. Statistical analyses reveal that the number of grooves is neither dependent on the degree of occlusal wear, nor on the position on the tooth or the individual's age. However, facet width is an important factor determining the number of subvertical grooves. The etiology of subvertical grooves formation on Neandertal teeth remains unclear. Am J Phys Anthropol, 2010. © 2010 Wiley‐Liss, Inc.     

Feeding behavior,mastication, and tooth wear in the western tarsier (Tarsius bancanus)

We assessed feeding and masticatory function in western tarsiers, Tarsius bancanus,from field study, from videotaped recordings of the feeding and chewing behavior of wild-caught animals in temporary captivity, from dissections of the muscles of mastication, and from scanning electron microscopic (SEM) examination of wear features of the teeth. Ingestion of large items of animal prey is made possible by the animal’s extremely wide gape. Anterior translation of the knob-like mandibular condyle in the anteroposteriorly elongated mandibular fossa makes possible a gape angle of 60–70‡. We observed two means of ingestion of grasshopper prey: ingestion by mastication, in which the postcanine teeth sever and reduce bites of the food as it is thrust into the mouth cavity, and repeated gape-shove sequences, during which the tarsier pushed grasshoppers of large diameter into the anterior part of its mouth and attempted to sever a bite with its anterior teeth. Morsels were successfully severed after three to five such sequences, and reduced quickly,with relatively few powerful, crushing chews. The insect cuticle was not evenly comminuted during mastication. We observed a marked side-to-side grinding component in the normal chewing cycle of T. bancanuson videotape and confirmed it by SEM. The main jaw adductors are bulky, long-fibered muscles that can accommodate wide grapes and still generate, at wide degrees of gape,the high occlusal pressures necessary to fracture thick chitinous exoskeletons of the scarabid beetles that form a substantial element of the western tarsier’s diet.     

Miniatures,morphology and molecules: Paedocypris and its phylogenetic position (Teleostei,Cypriniformes)

We review the morphological and molecular evidence that Mayden & Chen recently used to infer that the developmentally truncated fish genus Paedocypris is not a member of the teleost order Cypriniformes or carp‐like fishes, but is ‘the basal sister group to all Cypriniformes’. This hypothesis contradicts several previous studies that used molecular sequence data or morphological characters. A review of the morphological characters that Mayden & Chen discussed and mapped onto their ‘simplified tree’ shows that these, analysed alone, rather support a close relationship of the cyprinids Sundadanio, Danionella, and Paedocypris. We also present four additional analyses of morphological data, which all contradict Mayden & Chen's result. Despite its highly reductive skeleton, posing a serious problem when analysing its phylogenetic position with skeletal characters, the presence in Paedocypris of the basioccipital masticatory plate is compelling evidence that it is a member of the Cyprinoidei (Cyprinidae plus Psilorhynchidae). Our reanalysis and exploration of their molecular sequence data shows that only a single gene, EGR3, of the six nuclear genes analysed by Mayden & Chen, is responsible for the position of Paedocypris as ‘the basal sister group to all Cypriniformes’. Three independent methods to visualize and analyse phylogenetic signal and conflict of data sets (phylogenetic networks, splits analysis methods or SAMS, and site‐wise likelihood analyses) reveal a high level of character conflict and noise in Mayden & Chen's data set. The ‘basal’ position of Paedocypris seems to be the outcome of the interplay of two long‐branch effects. We apply the same analytical methods to the data set from Rüber et al.'s molecular analysis of the phylogenetic position of Paedocypris and discuss our findings. We conclude that none of the molecular data sets compiled to date can establish the phylogenetic position of Paedocypris with confidence. Morphological data suggest that Paedocypris and Danionella are sister genera, and that their closest relative is Sundadanio, although the position of these three miniatures among cyprinoids is still unclear. © 2014 The Linnean Society of London