Production of bacteriocins and siderophore-like activity by Azospirillum brasilense

Sixty Azospirillum strains were tested for their bacteriocin production ability; twenty-seven (45%) were able to produce bacteriocins and inhibited the growth of one or more indicator strains in solid medium. Mitomycin C treatment enhanced the proportion to 80%. Sometimes large growth inhibition zones were formed, but not when FeCl3 was added in the medium. These inhibition zones probably result from the activity of siderophores. Partially purified bacteriocins produced by four strains were inactivated at pH 4, but were very stable between pH 5 to 10; bacteriocins produced by three strains lost their activity between 55 and 80 degrees C. Loss or decrease in the bacteriocin activity was observed with pronase E treatment; trypsin, lysozyme and alpha-amylase did not have an effect on bacteriocin activity. These findings show that the antagonism among azospirilla was due principally to the bacteriocins and sometimes probably due to siderophores, but not to bacteriophages or other substances.     

Group H Streptococcal Bacteriocins Having No Relation to Bacterial Transformation

The culture filtrate of group H streptococcus strain Challis produced a competence factor (CF) for bacterial transformation as well as a bactericidal factor(s) against Wicky cells. Strain 36658, in the same streptococcal group, also produced the bactericidal factor(s) but not CF. The effect of the Challis bacteriocin was limited to strains Wicky and 58, whereas the 36658 bacteriocin affected 67% of 49 strains tested. Strain 58, one of the indicator strains, was affected by the bactericidal activity of these bacteriocins but not by CF activity, and failed to transform. No relationship between the bacteriocin-producing strains and indicator strains was observed. Both Challis and 36658 bacteriocin activities decreased markedly either when the bacteriocins were heated at 50 C for 30 min or with the addition of a protein synthesis inhibitor, but showed different sensitivities to trypsin, papain and lipase. The bacteriocins were of at least protein nature and their molecular weight was roughly estimated as 100,000 daltons by membrane filtration experiments. The 36658 bacteriocin is a new type of streptocin previously not reported. The possible absence of bacteriophage or phage-like particles in the preparations is discussed.     

Bacterioides fragilis: production and sensitivity to bacteriocins

Bacteriocin production and sensitivity to bacteriocins have been successfully applied as an epidemiological tool in several species of bacteria. However, little work has been carried out on the bacteriocins produced by Bacteroides fragilis, which is the most frequently isolated anaerobe species from clinical specimens. Thirty two clinical isolates of B. fragilis grown anaerobically on a 0.22 microm membrane filter spotted on an agar plate, were tested for bacteriocin production and used in a screen for bacteriocin sensitivity. Sensitivity to at least one bacteriocin was found in 94% of the strains, 62.5% were sensitive to two bacteriocins, whereas 34.4% were sensitive to three or more and finally one strain was found sensitive to 17 bacteriocins. Of the strains studied, 94% inhibited at least one strain, 66% inhibited two strains, and 30% inhibited at least three strains or more. Finally, one strain was extremely active by inhibiting the growth of 17 strains. Bacteriocin types are characterised by geographic variation, and their epidemiological investigation by a simple method could be promoted.     

Lack of Heterogeneity in Bacteriocin Production Across a Selection of Commercial Probiotic Products

Probiotics are live microorganisms that, when administered in adequate amounts, confer a health benefit to the host. Bacteriocin production has often been mooted as a desirable probiotic trait and, in specific cases, has been shown to promote probiotic survival within the gastrointestinal tract, contribute to the control of pathogens and even influence host gene expression in the gut. However, it is not clear what proportion of probiotic strains routinely found in commercial products produces bacteriocins, and additionally, it is not known which bacteriocins are produced most frequently. To address this, we conducted a culture-based assessment of the bacteriocinogenic ability of bacterial strains found in a variety of commercially available probiotic products. We detected eight bacteriocin-producing isolates from 16 tested products. Interestingly, in all cases, the isolates were Lactobacillus acidophilus, and the bacteriocin produced was identified as the narrow spectrum class II bacteriocin, lactacin B. The apparent absence of other bacteriocin-producing strains from across these products suggests a lack of heterogeneity in bacteriocin production within probiotic products and suggests that bacteriocin production is not being optimally harnessed as a probiotic trait.     

Characteristics and identification of enterocins produced by Enterococcus faecium JCM 5804T

AIMS: To screen bacteriocin-producing lactic acid bacteria (LAB) in 52 type and reference strains, which have not previously been studied, with respect to bacteriocins, and to characterize the presence of bacteriocins. METHODS AND RESULTS: Only Enterococcus faecium JCM 5804T showed bacteriocin-like activity. It inhibited the growth of Lactobacillus spp., Enterococcus spp., Clostridium spp., Listeria monocytogenes, and vancomycin resistant Enterococcus (VRE). However, it was not effective against Gram-negative strains, Weisella spp., Leuconostoc spp., Lactococcus spp., or methicillin resistant Staphylococcus aureus (MRSA). The inhibitory activity of Ent. faecium JCM 5804T was inactivated by proteinase K, trypsin, alpha-chymotrypsin, and papain, but not by lysozyme, lipase, catalase, or beta-glucosidase. The inhibitory activity was stable at 100 degrees C for 30 min, and had a pH range from 2 to 10. The molecular weight of the partially purified bacteriocin(s) was approx. 4.5 kDa, according to tricine-sodium dodecyl sulphate-polyacrylamide gel electrophoresis. Polymerase chain reaction and direct sequencing methods identified three different types of bacteriocins produced by Ent. faecium JCM 5804T, enterocin A, enterocin B, and enterocin P-like bacteriocin. CONCLUSION: Enterococcus faecium JCM 5804T produced three different types of bacteriocins, and they inhibited LAB and pathogens. SIGNIFICANCE AND IMPACT OF STUDY: This is the first report of enterocin A, enterocin B, and enterocin P-like bacteriocin, detected in Ent. faecium JCM 5804T among LAB type and reference strains.     

Bacteriocin plasmids ofPediococcus acidilactici

Summary Pediococcus acidilactici strains E, F and H isolated from fermented sausages produced bacteriocins which were protein in nature and inhibitory to a variety of spoilage and pathogenic microorganisms often encountered in foods. These strains harbored two to three plasmids ranging in size from 7.4 to 40.2 megadaltons. Curing experiments and plasmid profile analysis indicated the involvement of plasmid DNA with bacteriocin activity in all three strains. Carbohydrate fermentation and antibiotic resistance phenotypes did not appear to be associated with bacteriocin plasmids. Both bacteriocin activity and resistance determinants were linked in strain H and mediated by a 7.4-megadalton plasmid, whereas in strains E and F these two traits were not linked.     

Synergistic Mode of Action of Mesenterocins 52A and 52B Produced by <Emphasis Type="Italic">Leuconostoc mesenteroides</Emphasis> subsp. <Emphasis Type="Italic">mesenteroides</Emphasis> FR 52

Few studies have been published on the effects of two bacteriocins combinations and particularly on combinations of two bacteriocins with different structures produced by the same strain. In this work, the actions of mesenterocin 52A (class IIa) and mesenterocin 52B (class II), produced by Leuconostoc mesenteroides subsp. mesenteroides FR 52, were studied on strains susceptible to only one bacteriocin or to both. In broth, combination of mesenterocins enhanced the adaptation time of the strain susceptible to the both mesenterocins (48 h vs 17 h with only one bacteriocin). In agar medium, mesenterocins displayed, as expected, a synergistic effect on this strain (FIC_index < 1), but also on the two strains susceptible to only one mesenterocin. This original result was probably due to membrane composition modifications induced by the mesenterocin that enhanced bacteriocin action. Thus, this hurdle technique seems to be interesting in food preservation in terms of minimizing bacteriocin concentrations.     

Bacteriocins of phytopathogenic Corynebacterium species.

The majority (85% of all strains tested) of 12 phytopathogenic Corynebacterium species produced bacteriocin(s) on nutrient broth--yeast extract (NBY) medium. All C. nebraskense, C. michiganense, C. insidiosum, C. oortii, and C. iranicum strains produced bacteriocin(s). The optimal conditions for production of 23 distinct bacteriocins by eight species of Corynebacterium generally were 20 degrees C and 4 days of incubation on NBY or on modified Burkholder's agar that lacked peptone (MBAL). Production in liquid was marginal and not augmented by adding mitomycin C. Bacteriocins generally had little effect on other strains within a species but were inhibitory to other species. Most bacteriocins appeared to be bactericidal proteins resistant to heat (75 to 80 degrees C, 30 min) but sensitive to proteolytic enzymes. Some strains of C. nebraskense, C. michiganense, C. insidiosum, and C. flaccumfaciens produced two bacteriocins which were clearly differentiated by varying or testing one or more of the following: conditions for production, the indicator, heat stability, and susceptibility to proteolysis. Within certain limitations, a convenient and reproducible typing scheme was devised for strain and species differentiation of most phytopathogenic corynebacteria.     

Plasmid content and bacteriocin production by five strains of Lactococcus lactis isolated from semi-hard homemade cheese

In this study, the plasmid content and bacteriocin production of natural isolates of lactococci were investigated. Five bacteriocin producing lactococcal strains (Lactococcus lactis subsp. lactis BGMN1-2, BGMN1-3, BGMN1-5, BGMN1-6, and BGMN2-7) were isolated as nonstarter microflora of semi-hard homemade cheese and characterized. All isolates contained a number of plasmids. It was shown that lcnB structural genes for bacteriocin lactococcin B were located on large plasmids in all isolates. In the strains BGMN1-3 and BGMN1-5 proteinase prtP genes collocated with lcnB. Furthermore, these strains produced two additional bacteriocins (LsbA and LsbB) with genes responsible for their production and immunity located on the small rolling circle-replicating plasmid pMN5. Using deletion experiments of pMN5, minimal replicon of the plasmid and involvement of a bacteriocin locus in plasmid maintenance were identified. In addition, plasmid curing experiments showed that genes for catabolism or transport of 10 carbohydrates in the strain BGMN1-5 were plasmid located.     

New biologically active hybrid bacteriocins constructed by combining regions from various pediocin-like bacteriocins: the C-terminal region is important for determining specificity.

The pediocin-like bacteriocins, produced by lactic acid bacteria, are bactericidal polypeptides with very similar primary structures. Peptide synthesis followed by reverse-phase and ion-exchange chromatographies yielded biologically active pediocin-like bacteriocins in amounts and with a purity sufficient for characterizing their structure and mode of action. Despite similar primary structures, the pediocin-like bacteriocins, i.e., pediocin PA-1, sakacin P, curvacin A, and leucocin A, differed in their relative toxicities against various bacterial strains. On the basis of the primary structures, the polypeptides of these bacteriocins were divided into two modules: the relatively hydrophilic and well conserved N-terminal region, and the somewhat more diverse and hydrophobic C-terminal region. By peptide synthesis, four new biologically active hybrid bacteriocins were constructed by interchanging corresponding modules from various pediocin-like bacteriocins. All of the new hybrid bacteriocin constructs had bactericidal activity. The relative sensitivity of different bacterial strains to a hybrid bacteriocin was similar to that to the bacteriocin from which the C-terminal module was derived and quite different from that to the bacteriocin from which the N-terminal was derived. Thus, the C-terminal part of the pediocin-like bacteriocins is an important determinant of the target cell specificity. The synthetic bacteriocins were more stable than natural isolates, presumably as a result of the absence of contaminating proteases. However, some of the synthetic bacteriocins lost activity, but this was detectable only after months of storage. Mass spectrometry suggested that this instability was due to oxidation of methionine residues, resulting in a 10- to 100-fold reduction in activity.     

Bacteriocin Susceptibility of Clostridium perfringens: a Provisional Typing Schema

Ninety-four strains of Clostridium perfringens were examined for bacteriocin production. Bacteriocins produced by ten of these strains were selected for typing 274 cultures of C. perfringens. The bacteriocins were prepared by growing the producer strains in broth and precipitating the active principle from the supernatant fluids of centrifuged cultures with ammonium sulfate. All bacteriocins were titrated against a common indicator strain, adjusted to equivalent titers, and spotted onto blood agar plates seeded with the test organisms. Fifty different bacteriocin sensitivity patterns were observed. These patterns were organized into seven groups bearing some relationship, and the largest number of strains falling into any one pattern did not exceed 16% of the total strains tested. Ninety-nine percent of all isolates were typable. The new method should prove useful in studies where strains must be fingerprinted.     

Isolation and preliminary characterization of bacteriocins produced by Vibrio vulnificus

AIMS: The aim of this work was to isolate bacteriocins from the environment that would be effective in neutralizing Vibrio vulnificus in seafood. METHODS AND RESULTS: Water samples from Wilmington (NC, USA) were plated to determine total viable counts and to isolate presumptive Vibrio spp. Isolates containing plasmids were checked for antimicrobial activity which was not due to lytic bacteriophage or small, non-specific molecules. Three bacteriocin producers were detected and their inhibitory spectra determined: IW1 inhibited few strains of V. vulnificus; BC1 inhibited several strains of V. vulnificus, V. cholerae and V. parahaemolyticus and BC2 inhibited all tested Vibrio spp., Plesiomonas shigelloides and Escherichia coli. Loss of inhibitory activity coincided with loss of the bacteriocinogenic plasmid. The bacteriocins were found to be between 1.3 and 9.0 kDa. IW1 was heat labile, while BC1 was moderately stable except at extreme temperatures. BC2 was very stable and maintained its activity when frozen, autoclaved or exposed to extreme pH values. CONCLUSIONS: Bacteriocins have been isolated from environmental isolates of V. vulnificus and V. cholerae. BC2, with its broad spectrum and stability, may be useful in neutralizing V. vulnificus. SIGNIFICANCE AND IMPACT OF THE STUDY: The results have significance in relation to reducing the occurrence of food poisoning caused by V. vulnificus.     

Epidemiological Differentiation of Serratia marcescens: Typing by Bacteriocin Sensitivity

Strains of Serratia marcescens were compared and differentiated by a new method. Bacteriocin lysates were prepared from mitomycin-induced S. marcescens and added to lawns of test strains. From 100 bacteriocin producers, 12 were chosen with the aid of computer analysis as the most useful in differentiation. Uniform drops of the 12 standard bacteriocins were added simultaneously with a bacteriocin-bacteriophage dropper to each strain to be typed. All 93 strains of S. marcescens tested were typable and were differentiated into 79 different sensitivity patterns. One pattern had three strains, 12 patterns had two strains each, and 66 patterns had only one strain. The bacteriocins also inhibited Shigella, Klebsiella, and Enterobacter, but no other Enterobacteriaceae. Bacteriocin sensitivity was less stable as an epidemiological marker than bacteriocin production. Several colonial mutants had sensitivity patterns different from the wild types, but most mutants were identical. In three different instances when cross-infection had been shown by other methods, bacteriocin sensitivity also gave the correct epidemiological results. Until the significance and frequency of genetic variations are known, a more stable epidemiological technique should be used in conjunction with bacteriocin sensitivity.     

Bacteriocin production by members of the genusKlebsiella

Bacteriocin production was tested in 36Klebsiella and 3Enterobacter aerogenes strains. Bacteriocins produced byK. pneumoniae were found to be active on most strains ofK. edwardsi, K. aerogenes, K. rhinoscleromatis andE. aerogenes. The bacteriocin produced byE. aerogenes 37 is also active onK. pneumoniae andK. ozaenae. The bacteriocins produced byK. rhinoscleromatis, K. edwardsi andK. aerogenes are active on only a few strains. The activity spectra of the bacteriocins of a number of strains were similar. The method of classification used for colicins could not be applied to these bacteriocins as mutants resistant to one bacteriocin were nearly always resistant to all other bacteriocins. One mutant, though resistant, still adsorbed the bacteriocin to which it was resistant and it is very likely that the same applies for all other resistant mutants. The hypothesis is made that allKlebsiella bacteriocins have the same biochemical target, or more likely, possess a common transmission mechanism.     

A comparative study of three bacteriocins of Bacteroides fragilis

Three different bacteriocins produced by strains of Bacteroides fragilis were compared in terms of their production kinetics, physico-chemical nature, and action on macromolecular synthesis in a common indicator strain. Bacteriocin 78/438 was produced during the logarithmic growth phase, was thermolabile and stable between pH 5 and 9. It was susceptible to trypsin and pepsin, and affected DNA, RNA and protein syntheses in susceptible cells. Bacteriocin A49 was produced during the stationary growth phase, was thermolabile and stable between pH 7 and 9. This bacteriocin was also susceptible to trypsin and pepsin, but only RNA synthesis was affected in the indicator strain. Bacteriocin A55 differed markedly from both 78/438 and A49, and was found to be predominantly cell-bound, resistant to inactivation by high temperatures and stable over a wide pH range of 2 to 12. It was susceptible to trypsin but resistant to pepsin. A55 had a delayed effect on macromolecular synthesis with DNA synthesis being inhibited after 60 min. With all three bacteriocins, killing of the indicator strain followed single hit kinetics with the interaction of bacteriocin and target cell occurring in two stages. Killing by bacteriocin A55 was much slower than the other two and this may be related to its effect on macromolecular synthesis. The killing action of all three bacteriocins was dependent on the growth phase of the susceptible cells.     

Bacteriocins and temperate phage ofXanthomonas campestris pv. glycines

Sixteen strains ofXanthomonas campestris pathovar (pv.) glycines produced bacteriocins (glycinecins) on agar media. Optimal incubation conditions were for 48 h at 20°C. In addition to strains ofX. campestris pv. glycines, bacteriocins were also inhibitory towardsX. campestris pv. phaseoli andX. campestris pv. vesicatoria. All bacteriocins were susceptible to inactivation by a nonspecific protease and resistant to ribonuclease, but they differed in their sensitivity to trypsin, deoxyribonuclease, and heat treatment. Differential heat and enzyme sensitivities also indicated that some strains ofX. campestris pv. glycines produce more than one bacteriocin. Attempts to induce bacteriocin production in liquid cultures were unsuccessful. However, temperate bacteriophage were released from cultures ofX. campestris pv. glycines strains XP175, B83, 17915, and MINN after addition of mitomycin C or nalidixic acid or after exposure to UV light.Reference to brand or firm names does not constitute endorsement by the U.S. Department of Agriculture over others of a similar nature not mentioned.     

Analysis of the genetic region encoding a novel rhizobiocin from Rhizobium leguminosarum bv. viciae strain 306

Cross-testing of a number of strains of Rhizobium leguminosarum for bacteriocin production revealed that strain 306 produced at least two distinct bacteriocins. Further analysis involving plasmid transfer to Agrobacterium and other hosts demonstrated that there were bacteriocin determinants on plasmids pRle306b and pRle306c, as well as a third bacteriocin. The bacteriocin encoded by pRle306b was indistinguishable from the bacteriocin encoded by strain 248, whereas the bacteriocin encoded by plasmid pRle306c had a distinctive spectrum of activity against susceptible strains, as well as different physical properties from other bacteriocins that we have studied in our lab. Two mutants altered in production of the pRle306c bacteriocin were generated by transposon Tn5 mutagenesis, and the DNA flanking the transposon inserts in these mutants was cloned and characterized. DNA sequence analysis suggested that the pRle306c bacteriocin was a large protein belonging to the RTX family, and that a type I secretion system involving an ABC type transporter was required for export of the bacteriocin. A mutant unable to produce this bacteriocin was unaltered in its competitive properties, both in broth and in nodulation assays, suggesting that the bacteriocin may not play a major role in determining the ecological success of this strain.     

Bacteriocin detection by liquid chromatography/mass spectrometry for rapid identification

Aims: To establish a new system to detect and identify bacteriocins in the early stage of screening for novel bacteriocins. Methods and Results: Liquid chromatography/mass spectrometry (LC/MS) was employed for development of a new system for rapid detection and identification of bacteriocins. The system detected and identified bacteriocins such as nisin and lacticin 481 from 25 μl of culture supernatants of their producing strains by accurate mass determination coupled with simultaneous impurity removal within 40 min. Especially, the system clearly distinguished three nisin variants (A, Z, Q) in culture supernatants of their producing strains, although they have similar structures and molecular masses. Each one‐step pretreatment by cell adsorption–desorption or acetone precipitation improved bacteriocin detection dramatically, especially for mundticin KS. This system could be applied for detection and molecular mass determination of novel bacteriocins by extracting bacteriocin‐related ions. Conclusions: The developed system could detect and identify some kinds of bacteriocin from culture supernatants or pretreated samples. Significance and Impact of the Study: The developed system helps us to identify bacteriocins in the early stage of screening without any or with one‐step pretreatment. This system is effective on not only detection of known bacteriocins but also identification of novel bacteriocins. Consequently, this system will accelerate discovery of novel bacteriocins.     

Further development of a bacteriocin typing system for Clostridium perfringens

The specificity of typing Clostridium perfringens with bacteriocins was improved by adding new bacteriocins and deleting others from the original typing set of ten. A total of 516 new isolates of Cl. perfringens were screened for bacteriocin production and, of these, 162 strains (31%) were found to be producers. The sensitivity patterns obtained by testing 40 bacteriocins against 200 isolates of Cl. perfringens were recorded and the data subjected to a computer analysis. A total of 18 bacteriocins capable of dividing the 200 isolates into 98 typing patterns was selected. The repro-ducibility of the new system was tested by performing three sequential typings of 60 strains of Cl. perfringens. No variation was found in 73% of the strains, while a further 16% of the strains demonstrated a change in sensitivity to only one bacteriocin. Common serological types of Cl. perfringens were divisible into subtypes based upon both their ability to produce bacteriocins and their sensitivity to bacteriocins, suggesting a useful role for bacteriocin typing in conjunction with an already well-established tool for typing Cl. perfringens.     

Epidemiological Differentiation of Serratia marcescens: Typing by Bacteriocin Production

A new method for comparing and differentiating strains of S. marcescens is described which has proved useful in determining the epidemiology of hospital infections. Strains were grown in Trypticase soy broth, and bacteriocin production was induced with mitomycin C for 5 hr. The bacteriocin lysates were then spotted onto nine standard indicator strains, which were chosen with the aid of computer analysis from the 118 indicators tested. After 24 hr at 37 C, zones of inhibition due to bacteriocins were recorded. One hundred twentynine strains were differentiated into 72 different bacteriocin production patterns, but 11 strains were nontypable. None of the 45 other strains of Enterobacteriaceae produced bacteriocins. Bacteriocin production was a stable epidemiological marker. Colonial mutants always had identical patterns, as did the same strain which has passed from patient to patient through cross-infection. The new technique does not require any specialized equipment and can be used in laboratories with limited budgets. The applications of the new method in cross-infection studies and as a supplement to serological typing are discussed.