Site-specific recombination between ColE1 tcer and NTP16 nmr sites in vivo

The site-specific recombination system used by multicopy plasmids of the ColE1 family uses two identical plasmid-encoded recombination sites and four bacterial proteins to catalyze the recombination reaction. In the case of the Escherichia coli plasmid ColE1, the recombination site, cer, is a 280 by DNA sequence which is acted on by the products of the argR, pepA, xerC and xerD genes. We have constructed a model system to study this recombination system, using tandemly repeated recombination sites from the plasmids ColE1 and NTP16. These plasmids have allowed us precisely to define the region of strand exchange during site-specific recombination, and to derive a model for cer intramolecular site-specific recombination.     

Plasmid multimerization is dependent on RAD52 activity in Saccharomyces cerevisiae

Summary A mutant plasmid, pX, derived from the 1453 base pair small plasmid, YARp1 (or TRP1 RI circle), consists of 849 base pairs of DNA bearing the TRP1 gene and the ARS1 sequence of Saccharomyces cerevisiae and, unlike YARp1 and other commonly used yeast plasmids, highly multimerizes in a S. cerevisiae host. The multimerization of pX was dependent on RAD52, which is known to be necessary for homologous recombination in S. cerevisiae. Based upon this observation, a regulated system of multimerization of pX with GAL1 promoter-driven RAD52 has been developed. We conclude that the regulated multimerization of pX could provide a useful model system to study genetic recombination in the eukaryotic cell, in particular to investigate recombination intermediates and the effects of various trans-acting mutations on the multimerization and recombination of plasmids.     

Production of Marker-free Transgenic Tobacco Plants by FLP/frt Recombination System

Selectable marker genes that usually encode antibiotic or herbicide resistances are widely used for the selection of transgenic plants, but they become unnecessary and undesirable after transformation selection. An important strategy to improve the transgenic plants' biosafety is to eliminate the marker genes after successful selection. In the FLP/frt site-specific system of 2-μm plasmid from Saccharomyces cerevisiae, the FLP enzyme efficiently catalyzes recombination between two directly repeated FLP recombination target (frt) sites, eliminating the sequence between them. By controlled expression of the FLP recombinase and specific allocation of the frt sites within transgenic constructs, the system can be applied to eliminate the marker genes after selection. Through a series of procedures, the plant FLP/frt site-specific recombination system was constructed, which included the frt-containing vector pCAMBIA1300-betA-frt-als-frt and the FLP expression vector pCAMBIA1300-hsp-FLP-hpt. The FLP recombinase gene was introduced into transgenic (betA-frt-als-frt) tobacco plants by re-transformation. In re-transgenic plants, after heat-shock treatment, the marker gene als flanked by two identical orientation frt sites could be excised by the inducible expression of FLP recombinase under the control of hsp promoter. Excision of the als gene was found in 41 % re-transgenic tobacco plants, which indicated that this system could make a great contribution obtaining the marker-free transgenic plants.     

Multicopy plasmid stability in Escherichia coli requires host-encoded functions that lead to plasmid site-specific recombination

Summary The heritable stability of the multicopy plasmid ColE1 and its natural relatives, requires the presence in the plasmid of a site (cer in ColE1) that acts as a substrate for site-specific recombination, thereby maintaining plasmids in the monomeric state. Multimerization, promoted by homologous recombination, leads to plasmid loss. Here we show that the Escherichia coli chromosome encodes at least two unlinked functions that act on cer and its analogous sites, to promote stabilizing site-specific recombination. One of these functions is encoded by a gene residing on a cosmid that also contains the argI and pyrB genes, mapping it to the 96–97 min region of the E. coli map.     

The replication of Escherichia coli chromosome can be initiated by integrated ColE1-type plasmids

Summary When integrated in the chromosome of E. coli by site-specific recombination of , the ColE1 type replicator provokes the phenotypic suppression of CRT46 dnaA strain. The level of this suppression depends on the orientation of ColE1 replicator in the chromosome of bacteria. Integrative plasmids (intmids) coexist in both autonomous and extrachromosomal states in the same cell.     

Isolation and sequence analysis of a small cryptic plasmid pRK10 from a corrosion inhibitor degrading strain Serratia marcescens ACE2

The nucleotide sequence of a smallest cryptic plasmid pRK10 of Serratia marcescens ACE2 was determined. When compared to the all other plasmids reported so far from S. marcescens in sizes of over 70 kb, pRK10 is only 4241 bp long with 53% G + C content and has five coding sequences representing a coding percentage of 65.41. This small plasmid consists of one Tdh gene, four mobilization genes, mobCABD, and an origin of replication homologous to those of ColE1-type plasmids. Analysis of the five open reading frames identified on the plasmid suggests the presence of genes involved in replication and mobilization containing sequences homologous to the bom region and mobCABD genes of ColE1 and Tdh from Acinetobacter baumannii str. AYE. Results also indicate that pRK10 does not encode any gene for antibiotic/heavy metal resistance. Copy number and incompatibility of the plasmid with plasmids of ColE1 origin of replication was determined and it is quite stable in its natural host as well as in Escherichia coli DH5α. This relatively small plasmid will be useful for construction of shuttle vectors to facilitate the genetic analysis.     

recB recJ mutants ofSalmonella typhimurium are deficient in transductional recombination, DNA repair and plasmid maintenance

recB recJ mutants ofSalmonella typhimurium are deficient in transduction of chromosomal markers and ColE1-derived plasmids, and also in the maintenance of ColE1 and F plasmids. Plasmid instability is less severe inrecD recJ strains; ColE1 plasmid DNA preparations from these strains show an increased yield of high molecular weight (HMW) linear multimers and a concomitant reduction in plasmid monomers compared to the wild type. Plasmids remain unstable inrecA recD recJ mutants; since these do not produce HMW linear concatemers, we propose that a decrease in monomer production leads to plasmid instability.recB recJ strains also display decreased viability, a component of which may be related to their deficiency in DNA repair. In contrast to their severe defects in recombination, DNA repair and plasmid maintenance,recB recJ mutants ofS. typhimurium behave similarly to the wild type in the segregation of chromosome duplications. The latter observation suggests that neither RecBCD nor RecJ functions are required for chromosomal recombination events that do not involve the use of free ends as recombination substrates.     

Efficient gene targeting in the filamentous fungusAlternaria alternata

To characterize homologous recombination of transforming DNA in the filamentous fungusAlternaria alternata, we have compared the frequencies of gene targeting by circular and linear DNA fragments in the fungus. TheA. alternata BRM1 gene, which is an essential gene for melanin biosynthesis, was selected as a target locus.BRM1 targeting events are easily identified because loss of function leads to a change in mycelial color from black to light brown. We constructed targeting vectors by inserting 0.6 to 3.1 kb internalBRM1 segments into a plasmid containing the hygromycin B phosphotransferase gene. When circular plasmids were used, melanin-deficient (Me1^–) transformants accounted for 30 to 80% of hygromycin B-resistant (Hy^R) transformants, correlating closely with the size of theBRM1 segment in the transforming DNA. Restriction enzyme digestion within theBRM1 region greatly enhanced the frequency of gene targeting: integration of the linear plasmids was almost completely attributable to homologous recombination, regardless of the size of theBRM1 segments. Plasmids carrying bothBRM1 segments and rDNA segments were transformed into the fungus to examine the effect of the number of target copies on homologous recombination. Using the circular plasmids, Me1^– transformants accounted for only 5% of Hy^R transformants. In contrast, when the linear plasmid produced by restriction enzyme digestion within theBRM1 segment was used, almost all transformants were Me1^–. These results indicate that homologous integration of circular molecules inA. alternata is sensitive to the length of homology and the number of targets, and that double-strand breaks in transforming DNA greatly enhance homologous recombination.     

Site-specific gene integration in cultured silkworm cells mediated by φC31 integrase

The integrase from the Streptomyces bacteriophage φC31 carries out efficient recombination between an attP site in the phage genome and an attB site in the host chromosome. In the present study, we have used the φC31 integrase system to mediate site-specific recombination in the cultured silkworm cell line BmN4. A plasmid containing a cDNA encoding DsRed flanked by two φC31 attP sites was co-transfected together with a helper plasmid encoding the φC31 integrase into a cell line in which φC31 attB sites inserted between a baculovirus IE2 promoter, and a polyadenylation signal are present in one chromosome. Seven days after transfection, expression of DsRed was observed in transformed cells. Nucleotide sequence analysis demonstrated that the expected recombination between the attB and attP sites had been precisely carried out by the φC31 integrase. These results indicate that the φC31 site-specific recombination system should be widely applicable for efficient site-specific gene integration into silkworm chromosomes.     

The Agrobacterium rhizogenes pRi TL-DNA segment as a gene vector system for transformation of plants

Summary A plant gene transfer system was developed from the Agrobacterium rhizogenes pRi15834 TL-DNA region. Intermediate integration vectors constructed from ColE1-derived plasmids served as cloning vectors in Escherichia coli and formed cointegrates into the TL-DNA after transfer to A. rhizogenes. An A. rhizogenes strain with pBR322 plasmid sequences replacing part of the TL-DNA was also constructed. Plasmids unable to replicate in Agrobacterium can integrate into this TL-DNA by homologous recombination through pBR322 sequences. No loss of pathogenicity was observed with the strains formed after integration of intermediate vectors or strains carrying pBR322 in the TL-DNA segment. Up to 15 kb of DNA have been transferred to plant cells with these systems. The T-DNA from a binary vector was cotransformed into hairy roots which developed after transfer of the wild-type pRi T-DNA. Tested on Lotus corniculatus the TL-derived vector system transformed 90% of the developed roots and the T-DNA from the binary vector was cotransformed into 60% of the roots. Minimum copy numbers of one to five were found. Both constitutive and organ-specific plant genes were faithfully expressed after transfer to the legume L. corniculatus.     

ParA resolvase catalyzes site-specific excision of DNA from the Arabidopsis genome

The small serine resolvase ParA from bacterial plasmids RK2 and RP4 catalyzes the recombination of two identical 133 bp recombination sites known as MRS. Previously, we reported that ParA is active in the fission yeast Schizosaccharomyces pombe. In this work, the parA recombinase gene was placed under the control of the Arabidopsis OXS3 promoter and introduced into Arabidopsis lines harboring a chromosomally integrated MRS-flanked target. The ParA recombinase excised the MRS-flanked DNA and the excision event was detected in subsequent generations in the absence of ParA, indicating germinal transmission of the excision event. The precise site-specific deletion by the ParA recombination system in planta demonstrates that the ParA recombinase can be used to remove transgenic DNA, such as selectable markers or other introduced transgenes that are no longer desired in the final product.     

Structural and functional organization of ColE2 and ColE3 replicons

Summary The complete nucleotide sequences of the 1.5 kb regions of ColE2 and ColE3 plasmids containing the segments sufficient for autonomous replication have been determined. They are quite homologous (greater than 90%), indicating that these two plasmids share common mechanisms of initiation of replication and its regulation. An open reading frame with a coding capacity for a protein of about 300 amino acids is present in both ColE2 and ColE3 and it actually specifies the Rep (for replication) protein, which is the plasmid specific trans-acting factor required for autonomous replication. The amino acid sequences of the Rep proteins of ColE2 and ColE3 are quite homologous (greater than 90%). The cis-acting sites (origins) where replication initiates in the presence of the trans-acting factors consist of 32 bp for ColE2 and 33 bp for ColE3. They are the smallest of all the prokaryotic replication origins so far reported. They are nonhomologous only at two positions, one of which, a deletion of a single nucleotide in ColE2 (or an insertion in ColE3), determines the plasmid specificity in interaction of the origins with the Rep proteins. Both plasmids carry a region with an identical nucleotide sequence and the one in ColE2, the IncA region, has been shown to express incompatibility against both ColE2 and ColE3. These results indicate that these plasmids share a common IncA determinant. A possibility that a small antisense RNA is involved in copy number control and incompatibility (IncA function) was suggested.     

Transposon Tn21 encodes a RecA-independent site-specific integration system

Summary The IncW plasmid R388 and the DNA region of Tn21 containing the Sm^r and the Su^r genes are capable of RecA-independent recombination. This recombination occurs at a relatively high frequency (up to 10^-4 recombinants per recipient molecule) and results in integration of the two plasmids. No detectable repeats are formed in the process. The crossover points have been confined to a 0.4-kb homologous segment in both plasmids which contains a 59-bp DNA sequence presumably involved in the acquisition of new genes by Tn21 and its relatives (Cameron et al. 1986). It is likely that the recombination occurs precisely at this point. At least one trans-acting function (an integrase) is required for the site-specific recombination. It has been localized to a 1456-bp BstEII-BamHI fragment of Tn21 and can efficiently complement the integration of plasmids containing the integration site.     

Evidence of abortive recombination in ruv mutants of Escherichia coli K12

Summary Genetic recombination in Escherichia coli was investigated by measuring the effect of mutations in ruv and rec genes on F-prime transfer and mobilization of nonconjugative plasmids. Mutation of ruv was found to reduce the recovery of F-prime transconjugants in crosses with recB recC sbcA strains by about 30-fold and with recB recC sbcB sbcC strains by more than 300-fold. Conjugative plasmids lacking any significant homology with the chromosome were transferred normally to these ruv mutants. Mobilization of the plasmid cloning vectors pHSG415, pBR322, pACYC184 and pUC18 were reduced by 20- to 100-fold in crosses with ruv rec ⁺ sbc ⁺ strains, depending on the plasmid used. Recombinant plasmids carrying ruv ⁺ were transferred efficiently. With both F-prime transfer and F-prime cointegrate mobilization, the effect of ruv was suppressed by inactivating recA. It is proposed that the failure to recover transconjugants in ruv recA ⁺strains is due to abortive recombination and that the ruv genes define activities which function late in recombination to help convert recombination intermediates into viable products.     

Multimer resolution systems of ColE1 and ColK: localisation of the crossover site

Summary We have identified and characterised a stability function encoded by the high copy plasmid ColK. The function is analogous to ColE1 cer and maximises stability by maintaining plasmids in the monomeric state. In vivo recombination between cer and ckr (which share more than 90% homology at the DNA sequence level) produced a functional hybrid. Sequence analysis of hybrids indicates that recombination involving cer and ckr is site-specific and occurs within a 35 bp region of DNA which contains palindromic symmetry.     

Structural plasmid evolution as a result of coupled recombinations at<Emphasis Type="Italic"> bom</Emphasis> and<Emphasis Type="Italic"> cer</Emphasis> sites

We have studied the recombination of plasmids bearing bom and cer sites. The bom (basis of mobilization) site is required for conjugative transfer, while the cer (ColE1 resolution) site is involved in the resolution of plasmid multimers, which increases plasmid stability. We constructed a pair of parent plasmids in such a way as to allow us select clones containing recombinant plasmids directly. Clone selection was based on the McrA sensitivity of recipient host DNA modified by M. Ecl18kI, which is encoded by one of the parent plasmids. The recombinant plasmid contains segments originating from both parental DNAs, which are bounded by bom and cer sites. Its structure is in accordance with our previously proposed model for recombination mediated by bom and cer sequences. The frequency of recombinant plasmid formation coincided with the frequency of recombination at the bom site. We also show that bom-mediated recombination in trans, unlike in cis, is independent of other genetic determinants on the conjugative plasmids.Communicated by W. Goebel     

Marker rescue from the Nicotiana tabacum plastid genome using a plastid/Escherichia coli shuttle vector

We recently reported an 868-bp plastid DNA minicircle, NICE1, that formed during transformation in a transplastomic Nicotiana tabacum line. Shuttle plasmids containing NICEI sequences were maintained extrachromosomally in plastids and shown to undergo recombination with NICE1 sequences on the plastid genome. To prove the general utility of the shuttle plasmids, we tested whether plastid genes outside the NICE1 region could be rescued in Escherichia coli. The NICE1-based rescue plasmid, pNICER1, carries NICE1 sequences for maintenance in plastids, the CoIE1 ori for maintenance in E. coli and a spectinomcyin resistance gene (aadA) for selection in both systems. In addition, pNICERl carries a defective kanamycin resistance gene, kan*, to target the rescue of a functional kanamycin resistance gene, kan, from the recipient plastid genome. pNICERl was introduced into plastids where recombination could occur between the homologous kan/kan* sequences, and subsequently rescued in E. coli to recover the products of recombination. Based on the expression of kanamycin resistance in E. coli and the analysis of three restriction fragment polymorphisms, recombinant kan genes were recovered at a high frequency. Efficient rescue of kan from the plastid genome in E. coli indicates that NICE 1-based plasmids are suitable for rescuing mutations from any part of the plastid genome, expanding the repertoire of genetic tools available for plastid biology.     

Analysis of Tn5 inversion events inEscherichia coli plasmids

The ability of the bacterial transposon Tn5 to undergo sequence inversion in Rec⁺ Escherichia coli cells as a result of recombination between its duplicated IS50 elements was examined using specially designed plasmid constructs. Surprisingly, recombination events in the IS50 elements that led to crossover and therefore Tn5 inversion could be detected at a frequency of only 10^–5. This was approximately an order of magnitude lower than the frequency of IS50 recombination that led to conversion events (i.e. non-reciprocal recombination) without crossover, and at least two orders of magnitude lower than the frequency of intermolecular recombination between IS50 elements on two different plasmids. These rare conversion and inversion events in Tn5 appeared to be due to intramolecular recombination and not simply to multiple rounds of reciprocal crossing over, since the heterodimeric intermediates that would be generated during the latter process could be readily isolated but were shown to yield a completely different set of plasmid products upon resolution.     

Characterization of pACK4, a mobilizable plasmid from Staphylococcus simulans biovar staphylolyticus

Staphylococcus simulans biovar staphylolyticus, the lysostaphin-producing organism, contains five plasmids designated pACK1–pACK5. pACK4 was found to be relaxable and to share sequence similarity with a number of well-characterized mobilizable plasmids from other staphylococci. All mobilizable staphylococcal plasmids characterized to date mediate resistance to various antibiotics, but pACK4 is unique because it contains no recognizable antibiotic resistance genes. pACK4 was found to contain an origin of transfer (oriT) region that shares inverted repeat regions and the same nic site as several other mobilizable staphylococcal plasmids. The presence of this conserved oriT region suggested that pACK4 might be mobilized in the presence of a conjugative plasmid. Filter mating studies revealed that pACK4 was mobilized by the conjugative plasmid pGO1. In addition, pACK4 was found to be virtually identical to the recently described plasmid pVGA from Staphylococcus aureus, except that pVGA contains an additional region (vgaA) that confers resistance to pleuromutilin, streptogramin A, and lincosamide. The high sequence similarity among pACK4, pVGA, and several previously described mobilizable staphylococcal plasmids suggests a common origin for these plasmids.