High-resolution radiation hybrid map of wheat chromosome 1D

Physical mapping methods that do not rely on meiotic recombination are necessary for complex polyploid genomes such as wheat (Triticum aestivum L.). This need is due to the uneven distribution of recombination and significant variation in genetic to physical distance ratios. One method that has proven valuable in a number of nonplant and plant systems is radiation hybrid (RH) mapping. This work presents, for the first time, a high-resolution radiation hybrid map of wheat chromosome 1D (D genome) in a tetraploid durum wheat (T. turgidum L., AB genomes) background. An RH panel of 87 lines was used to map 378 molecular markers, which detected 2312 chromosome breaks. The total map distance ranged from ~3,341 cR_35,000 for five major linkage groups to 11,773 cR_35,000 for a comprehensive map. The mapping resolution was estimated to be ~199 kb/break and provided the starting point for BAC contig alignment. To date, this is the highest resolution that has been obtained by plant RH mapping and serves as a first step for the development of RH resources in wheat.     

Next Generation Mapping of Enological Traits in an F2 Interspecific Grapevine Hybrid Family

In winegrapes (Vitis spp.), fruit quality traits such as berry color, total soluble solids content (SS), malic acid content (MA), and yeast assimilable nitrogen (YAN) affect fermentation or wine quality, and are important traits in selecting new hybrid winegrape cultivars. Given the high genetic diversity and heterozygosity of Vitis species and their tendency to exhibit inbreeding depression, linkage map construction and quantitative trait locus (QTL) mapping has relied on F₁ families with the use of simple sequence repeat (SSR) and other markers. This study presents the construction of a genetic map by single nucleotide polymorphisms identified through genotyping-by-sequencing (GBS) technology in an F₂ mapping family of 424 progeny derived from a cross between the wild species V. riparia Michx. and the interspecific hybrid winegrape cultivar, ‘Seyval’. The resulting map has 1449 markers spanning 2424 cM in genetic length across 19 linkage groups, covering 95% of the genome with an average distance between markers of 1.67 cM. Compared to an SSR map previously developed for this F₂ family, these results represent an improved map covering a greater portion of the genome with higher marker density. The accuracy of the map was validated using the well-studied trait berry color. QTL affecting YAN, MA and SS related traits were detected. A joint MA and SS QTL spans a region with candidate genes involved in the malate metabolism pathway. We present an analytical pipeline for calling intercross GBS markers and a high-density linkage map for a large F₂ family of the highly heterozygous Vitis genus. This study serves as a model for further genetic investigations of the molecular basis of additional unique characters of North American hybrid wine cultivars and to enhance the breeding process by marker-assisted selection. The GBS protocols for identifying intercross markers developed in this study can be adapted for other heterozygous species.     

Development of F1 hybrid population and the high-density linkage map for European aspen (<Emphasis Type="Italic">Populus tremula</Emphasis> L.) using RADseq technology

Background

Restriction-site associated DNA sequencing (RADseq) technology was recently employed to identify a large number of single nucleotide polymorphisms (SNP) for linkage mapping of a North American and Eastern Asian Populus species. However, there is also the need for high-density genetic linkage maps for the European aspen (P. tremula) as a tool for further mapping of quantitative trait loci (QTLs) and marker-assisted selection of the Populus species native to Europe.

Results

We established a hybrid F1 population from the cross of two aspen parental genotypes diverged in their phenological and morphological traits. We performed RADseq of 122 F1 progenies and two parents yielding 15,732 high-quality SNPs that were successfully identified using the reference genome of P. trichocarpa. 2055 SNPs were employed for the construction of maternal and paternal linkage maps. The maternal linkage map was assembled with 1000 SNPs, containing 19 linkage groups and spanning 3054.9 cM of the genome, with an average distance of 3.05 cM between adjacent markers. The paternal map consisted of 1055 SNPs and the same number of linkage groups with a total length of 3090.56 cM and average interval distance of 2.93 cM. The linkage maps were employed for QTL mapping of one-year-old seedlings height variation. The most significant QTL (LOD = 5.73) was localized to LG5 (96.94 cM) of the male linkage map, explaining 18% of the phenotypic variation.

Conclusions

The set of 15,732 SNPs polymorphic in aspen and high-density genetic linkage maps constructed for the P. tremula intra-specific cross will provide a valuable source for QTL mapping and identification of candidate genes facilitating marker-assisted selection in European aspen.

     

Construction of a genetic map for arabica coffee

We have used AFLPs to construct a genetic linkage map on a pseudo-F₂ population of arabica coffee (Coffea arabica L.) derived from a cross between the cultivars Mokka hybrid and Catimor. Sixty trees from this population were selected on the basis of plant height distribution to construct a linkage map. A total of 456 dominant markers and eight co-dominant markers were generated from 288 AFLP primer combinations. Of the total number of markers generated, 68% were from cv. Catimor, 30% from cv. Mokka hybrid, and 2% were co-dominant. This distribution suggests that the heterozygosity within the cv. Catimor sub-genomes was twice that within the cv. Mokka hybrid sub-genomes. Linkage groups were constructed using MAPMAKER version 3.0, resulting in 16 major linkage groups containing 4–21 markers, and 15 small linkage groups consisting of 2–3 linked markers each. The total length of the map was 1,802.8 cM, with an average distance of 10.2 cM between adjacent markers. This genetic map will serve as the framework for mapping QTL controlling source-sink traits in the same population.Communicated by H.F. Linskens     

RAPD-based genetic linkage map of blueberry derived from a cross between diploid species (Vaccinium darrowi and V. elliottii)

An initial genetic linkage map for blueberry has been constructed from over 70 random amplified polymorphic DNA (RAPD) markers that segregated 11 in a testcross population of 38 plants. The mapping population was derived from a cross between two diploid blueberry plants: the F₁ interspecific hybrid (Vaccinium darrowi Camp x V. elliottii Chapm.) and another V. darrowi plant. The map currently comprises 12 linkage groups (in agreement with the basic blueberry chromosome number) and covers a total genetic distance of over 950cM, with a range of 3–30cM between adjacent markers. The use of such a map for identifying molecular markers linked to genes controlling chilling requirement and cold hardiness is discussed.     

An autosomal genetic linkage map of the domestic cat,Felis silvestris catus

We report on the completion of an autosomal genetic linkage (GL) map of the domestic cat (Felis silvestris catus). Unlike two previous linkage maps of the cat constructed with a hybrid pedigree between the domestic cat and the Asian leopard cat, this map was generated entirely with domestic cats, using a large multi-generational pedigree (n = 256) maintained by the Nestlé Purina PetCare Company. Four hundred eighty-three simple tandem repeat (STR) loci have been assigned to linkage groups on the cat's 18 autosomes. A single linkage group spans each autosome. The length of the cat map, estimated at 4370 cM, is long relative to most reported mammalian maps. A high degree of concordance in marker order was observed between the third-generation map and the 1.5 Mb-resolution radiation hybrid (RH) map of the cat. Using the cat 1.9 × whole-genome sequence, we identified map coordinates for 85% of the loci in the cat assembly, with high concordance observed in marker order between the linkage map and the cat sequence assembly. The present version represents a marked improvement over previous cat linkage maps as it (i) nearly doubles the number of markers that were present in the second-generation linkage map in the cat, (ii) provides a linkage map generated in a domestic cat pedigree which will more accurately reflect recombination distances than previous maps generated in a hybrid pedigree, and (iii) provides single linkage groups spanning each autosome. Marker order was largely consistent between this and the previous maps, though the use of a hybrid pedigree in the earlier versions appears to have contributed to some suppression of recombination. The improved linkage map will provide an added resource for the mapping of phenotypic variation in the domestic cat and the use of this species as a model system for biological research.     

QTL Mapping of Leafy Heads by Genome Resequencing in the RIL Population of Brassica rapa

Leaf heads of cabbage (Brassica oleracea), Chinese cabbage (B. rapa), and lettuce (Lactuca sativa) are important vegetables that supply mineral nutrients, crude fiber and vitamins in the human diet. Head size, head shape, head weight, and heading time contribute to yield and quality. In an attempt to investigate genetic basis of leafy head in Chinese cabbage (B. rapa), we took advantage of recent technical advances of genome resequencing to perform quantitative trait locus (QTL) mapping using 150 recombinant inbred lines (RILs) derived from the cross between heading and non-heading Chinese cabbage. The resequenced genomes of the parents uncovered more than 1 million SNPs. Genotyping of RILs using the high-quality SNPs assisted by Hidden Markov Model (HMM) generated a recombination map. The raw genetic map revealed some physical assembly error and missing fragments in the reference genome that reduced the quality of SNP genotyping. By deletion of the genetic markers in which recombination rates higher than 20%, we have obtained a high-quality genetic map with 2209 markers and detected 18 QTLs for 6 head traits, from which 3 candidate genes were selected. These QTLs provide the foundation for study of genetic basis of leafy heads and the other complex traits.     

Recombination in the Vicinity of Insertions of Transposon Tn 5 in MYXOCOCCUS XANTHUS

To test genetic recombination in the vicinity of insertions of the transposon Tn5, crosses were performed by transduction between M. xanthus strains carrying different insertions of Tn5. One member of each pair carried resistance to kanamycin (Tn5-Km); the other carried resistance to tetracycline (Tn5-Tc). The distance between each pair of Tn5 insertions was also measured by restriction mapping. The physical distance corresponding to each recombination frequency was calculated from the transductional linkage and compared with distance on the restriction map. A good correspondence between the two measures of distance was obtained for a pair of Tn5 insertions near the cglB locus and for another pair near the mgl locus. Correspondence between the two measurements of distance, the observed allelic behavior of Tn5-Km and Tn5 -Tc at the same locus and the finding of the same frequencies of recombinants in reciprocal crosses implied that recombination in the vicinity of Tn 5 was normal.     

Genomic collinearity and the genetic architecture of floral differences between the homoploid hybrid species Iris nelsonii and one of its progenitors,Iris hexagona

Hybrid speciation represents a relatively rapid form of diversification. Early models of homoploid hybrid speciation suggested that reproductive isolation between the hybrid species and progenitors primarily resulted from karyotypic differences between the species. However, genic incompatibilities and ecological divergence may also be responsible for isolation. Iris nelsonii is an example of a homoploid hybrid species that is likely isolated from its progenitors primarily by strong prezygotic isolation, including habitat divergence, floral isolation and post-pollination prezygotic barriers. Here, we used linkage mapping and quantitative trait locus (QTL) mapping approaches to investigate genomic collinearity and the genetic architecture of floral differences between I. nelsonii and one of its progenitor species I. hexagona. The linkage map produced from this cross is highly collinear with another linkage map produced between I. fulva and I. brevicaulis (the two other species shown to have contributed to the genomic makeup of I. nelsonii), suggesting that karyotypic differences do not contribute substantially to isolation in this homoploid hybrid species. Similar to other studies of the genetic architecture of floral characteristics, at least one QTL was found that explained >20% variance in each color trait, while minor QTLs were detected for each morphological trait. These QTLs will serve as hypotheses for regions under selection by pollinators.     

Using microsatellites to understand the physical distribution of recombination on soybean chromosomes

Soybean is a major crop that is an important source of oil and proteins. A number of genetic linkage maps have been developed in soybean. Specifically, hundreds of simple sequence repeat (SSR) markers have been developed and mapped. Recent sequencing of the soybean genome resulted in the generation of vast amounts of genetic information. The objectives of this investigation were to use SSR markers in developing a connection between genetic and physical maps and to determine the physical distribution of recombination on soybean chromosomes. A total of 2,188 SSRs were used for sequence-based physical localization on soybean chromosomes. Linkage information was used from different maps to create an integrated genetic map. Comparison of the integrated genetic linkage maps and sequence based physical maps revealed that the distal 25% of each chromosome was the most marker-dense, containing an average of 47.4% of the SSR markers and 50.2% of the genes. The proximal 25% of each chromosome contained only 7.4% of the markers and 6.7% of the genes. At the whole genome level, the marker density and gene density showed a high correlation (R²) of 0.64 and 0.83, respectively with the physical distance from the centromere. Recombination followed a similar pattern with comparisons indicating that recombination is high in telomeric regions, though the correlation between crossover frequency and distance from the centromeres is low (R² = 0.21). Most of the centromeric regions were low in recombination. The crossover frequency for the entire soybean genome was 7.2%, with extremes much higher and lower than average. The number of recombination hotspots varied from 1 to 12 per chromosome. A high correlation of 0.83 between the distribution of SSR markers and genes suggested close association of SSRs with genes. The knowledge of distribution of recombination on chromosomes may be applied in characterizing and targeting genes.     

Construction of a genetic map for Theileria parva: identification of hotspots of recombination

The tick-borne protozoan parasite Theileria parva is the causal agent of East Coast Fever (ECF), a severe lymphoproliferative disease of cattle in eastern, central and southern Africa. The life cycle of T. parva is predominantly haploid, with a brief diploid stage occurring in the tick vector that involves meiotic recombination. Resolved genetic studies of T. parva are currently constrained by the lack of a genome-wide high-definition genetic map of the parasite. We undertook a genetic cross of two cloned isolates of T. parva to construct such a map from 35 recombinant progeny, using a genome-wide panel of 79 variable number of tandem repeat markers. Progeny were established by in vitro cloning of cattle lymphocytes after infection with sporozoites prepared from Rhipicephalus appendiculatus ticks fed on a calf undergoing a dual infection with the two clonal parental stocks. The genetic map was determined by assigning individual markers to the four chromosome genome, whose physical length is approximately 8309 kilobasepairs (Kb). Segregation analysis of the markers among the progeny revealed a total genetic size of 1683.8 centiMorgans (cM), covering a physical distance of 7737.62 Kb (∼93% of the genome). The average genome-wide recombination rate observed for T. parva was relatively high, at 0.22 cM Kb⁻¹ per meiotic generation. Recombination hot-spots and cold-spots were identified for each of the chromosomes. A panel of 27 loci encoding determinants previously identified as immunorelevant or likely to be under selection were positioned on the linkage map. We believe this to be the first genetic linkage map for T. parva. This resource, with the availability of the genome sequence of T. parva, will promote improved understanding of the pathogen by facilitating the use of genetic analysis for identification of loci responsible for variable phenotypic traits exhibited by individual parasite stocks.     

Construction of an Interspecific Genetic Map Based on InDel and SSR for Mapping the QTLs Affecting the Initiation of Flower Primordia in Pepper (Capsicum spp.)

Re-sequencing permits the mining of genome-wide variations on a large scale and provides excellent resources for the research community. To accelerate the development and application of molecular markers and identify the QTLs affecting the flowering time-related trait in pepper, a total of 1,038 pairs of InDel and 674 SSR primers from different sources were used for genetic mapping using the F₂ population (n = 154) derived from a cross between BA3 (C. annuum) and YNXML (C. frutescens). Of these, a total of 224 simple PCR-based markers, including 129 InDels and 95 SSRs, were validated and integrated into a map, which was designated as the BY map. The BY map consisted of 13 linkage groups (LGs) and spanned a total genetic distance of 1,249.77 cM with an average marker distance of 5.60 cM. Comparative analysis of the genetic and physical map based on the anchored markers showed that the BY map covered nearly the whole pepper genome. Based on the BY map, one major and five minor QTLs affecting the number of leaves on the primary axis (Nle) were detected on chromosomes P2, P7, P10 and P11 in 2012. The major QTL on P2 was confirmed based on another subset of the same F₂ population (n = 147) in 2014 with selective genotyping of markers from the BY map. With the accomplishment of pepper whole genome sequencing and annotations (release 2.0), 153 candidate genes were predicted to embed in the Nle2.2 region, of which 12 important flowering related genes were obtained. The InDel/SSR-based interspecific genetic map, QTLs and candidate genes obtained by the present study will be useful for the downstream isolation of flowering time-related gene and other genetic applications for pepper.     

Genome-wide detection of genetic loci triggering uneven descending of gametes from a natural hybrid pine

Marker transmission ratio distortion (TRD) revealed in genetic mapping studies on distant crosses can be used to infer the genetic basis relating to reproductive barriers between species. Unlike measuring the degree of TRD by the overall number of segregation distorted markers in the affected genome regions, mapping the segregation distorting loci (SDL) provides reliable statistic parameters that help to confine the target genomic regions for further characterization at molecular level. Using the linkage map constructed for a natural hybrid of Pinus hwangshanensis and Pinus massoniana, we perform SDL analyses and align the established map to the loblolly pine consensus map. Altogether, six SDLs with relatively strong LOD supports are detected on four linkage groups of the established map. Since gametes inheriting different alternate chromatid blocks from the SDL affecting genome regions have uneven chance to descend to the offspring, the corresponding genome regions are supposed to play more significant roles in rendering the reproductive isolations between P. hwangshanensis and P. massoniana. This paper presents a case study on a crucial step for uncovering the hidden genetic factors that trigger the uneven descending of gametes in a natural hybrid pine.     

Preliminary genetic linkage maps of Chinese herb Dendrobium nobile and D. moniliforme

Dendrobium is an endangered genus in the orchid family with medicinal and horticultural value. Two preliminary genetic linkage maps were constructed using 90 F₁ progeny individuals derived from an interspecific cross between D. nobile and D. moniliforme (both, 2n?=?38), using random amplified polymorphic DNA (RAPD) and intersimple sequence repeat (ISSR). A total of 286 RAPD loci and 68 ISSR loci were identified and used for genetic linkage analysis. Maps were constructed by double pseudo-testcross mapping strategy using the software Mapmaker/EXP ver. 3.0, and Kosambi map distances were constructed using a LOD score ≥ 4 and a recombination threshold of 0.4. The resulting frame map of D. nobile was 1474 cM in total length with 116 loci distributed in 15 linkage groups; and the D. moniliforme linkage map had 117 loci placed in 16 linkage groups spanning 1326.5 cM. Both maps showed 76.91% and 73.59% genome coverage for D. nobile and D. moniliforme, respectively. These primary maps provide an important basis for genetic studies and further medicinal and horticultural traits mapping and marker-assisted selection in Dendrobium breeding programmes.     

陆地棉亚红株突变性状的连锁遗传规律分析

以具有绿叶、花瓣红心的陆地棉、海岛棉与具有亚红株、无红心的陆地棉种质为试验材料, 通过经典遗传学的二点测验分析了亚红株突变的连锁遗传规律; 结果显示, 测交群体(E083×B026)×苏9701、(B026×E083)×苏9701的平均交换值为1.35%; 测交群体(E083×海7124)×苏9701、(海7124×E083)×苏9701的平均交换值为2.94%。同时, 用亚红株、无红心、棕絮与绿叶、红心、白絮种质杂交, 进行三点测验, 结果表明: 基因Rs在Lc1、R₂之间; 基因Rs和Lc1的遗传距离为42.21 cM, Rs 和R₂的遗传距离为 1.68 cM。当两对基因同时发生双交换时, 相互干扰小, 符合系数达0.79。根据已知的基因遗传距离, 整合后绘制了遗传连锁图: Rs 基因位于基因R2、Lc1以及分子标记NAU2863、NAU3735和NAU1048、BNL2634之间; 其中Rs基因两侧的分子标记NAU3735和NAU1048与它的遗传距离分别为0.1 cM和0.2 cM。     

A saturated genetic linkage map of rubber tree (Hevea spp.) based on RFLP, AFLP, microsatellite, and isozyme markers

The first genetic map for Hevea spp. (2n=36) is presented here. It is based on a F₁ progeny of 106 individuals allowing the construction of a female, a male, and a synthetic map according to the pseudo-testcross strategy. Progeny were derived from an interspecific cross between PB260, a H. brasiliensis cultivated clone, and RO38, a H. brasiliensis×H. benthamiana interspecific hybrid clone. The disomic inheritance observed for all the codominant markers scattered on the 2n=36 chromosomes revealed that Hevea behaves as diploids. Homologous linkage groups between the two parental maps were merged using bridge loci. A total of 717 loci constituted the synthetic map, including 301 RFLPs, 388 AFLPs, 18 microsatellites, and 10 isozymes. The markers were assembled into 18 linkage groups, thus reflecting the basic chromosome number, and covered a total distance of 2144 cM. Nine markers were found to be unlinked. Segregation distortion was rare (1.4%). Average marker density was 1 per 3 cM. Comparison of the distance between loci in the parental maps revealed significantly less meiotic recombination in the interspecific hybrid male parent than in the female parent. Hevea origin and genome organisation are discussed. Received: 2 February 1999 / Accepted: 11 March 1999     

A High-Density SNP Map of Sunflower Derived from RAD-Sequencing Facilitating Fine-Mapping of the Rust Resistance Gene R12

A high-resolution genetic map of sunflower was constructed by integrating SNP data from three F₂ mapping populations (HA 89/RHA 464, B-line/RHA 464, and CR 29/RHA 468). The consensus map spanned a total length of 1443.84 cM, and consisted of 5,019 SNP markers derived from RAD tag sequencing and 118 publicly available SSR markers distributed in 17 linkage groups, corresponding to the haploid chromosome number of sunflower. The maximum interval between markers in the consensus map is 12.37 cM and the average distance is 0.28 cM between adjacent markers. Despite a few short-distance inversions in marker order, the consensus map showed high levels of collinearity among individual maps with an average Spearman''s rank correlation coefficient of 0.972 across the genome. The order of the SSR markers on the consensus map was also in agreement with the order of the individual map and with previously published sunflower maps. Three individual and one consensus maps revealed the uneven distribution of markers across the genome. Additionally, we performed fine mapping and marker validation of the rust resistance gene R₁₂, providing closely linked SNP markers for marker-assisted selection of this gene in sunflower breeding programs. This high resolution consensus map will serve as a valuable tool to the sunflower community for studying marker-trait association of important agronomic traits, marker assisted breeding, map-based gene cloning, and comparative mapping.     

A Consensus Microsatellite-Based Linkage Map for the Hermaphroditic Bay Scallop (Argopecten irradians) and Its Application in Size-Related QTL Analysis

Bay scallop (Argopecten irradians) is one of the most economically important aquaculture species in China. In this study, we constructed a consensus microsatellite-based genetic linkage map with a mapping panel containing two hybrid backcross-like families involving two subspecies of bay scallop, A. i. irradians and A. i. concentricus. One hundred sixty-one microsatellite and one phenotypic (shell color) markers were mapped to 16 linkage groups (LGs), which corresponds to the haploid chromosome number of bay scallop. The sex-specific map was 779.2 cM and 781.6 cM long in female and male, respectively, whereas the sex-averaged map spanned 849.3 cM. The average resolution of integrated map was 5.9 cM/locus and the estimated coverage was 81.3%. The proportion of distorted markers occurred more in the hybrid parents, suggesting that the segregation distortion was possibly resulted from heterospecific interaction between genomes of two subspecies of bay scallop. The overall female-to-male recombination rate was 1.13∶1 across all linked markers in common to both parents, and considerable differences in recombination also existed among different parents in both families. Four size-related traits, including shell length (SL), shell height (SH), shell width (SW) and total weight (TW) were measured for quantitative trait loci (QTL) analysis. Three significant and six suggestive QTL were detected on five LGs. Among the three significant QTL, two (qSW-10 and qTW-10, controlling SW and TW, respectively) were mapped on the same region near marker AiAD121 on LG10 and explained 20.5% and 27.7% of the phenotypic variance, while the third (qSH-7, controlling SH) was located on LG7 and accounted for 15.8% of the phenotypic variance. Six suggestive QTL were detected on four different LGs. The linkage map and size-related QTL obtained in this study may facilitate marker-assisted selection (MAS) in bay scallop.