脱氢酶生物传感器研究关键技术与进展

自然界中依赖烟酰胺类辅酶(NAD+或NADP+)的脱氢酶是氧化还原酶中最重要的一类,基于此类酶的生物传感器应用前景广阔,近年来发展迅速。构建这类传感器需要两项关键技术,即氧化型辅酶在电极表面的再生和辅酶固定化。本文介绍了辅酶电化学再生的主要方法、辅酶固定化的常见手段,以及相关的研究进展。     

葡萄糖氧化酶在枯草芽孢杆菌芽孢表面的展示及其酶电极制备

葡萄糖生物传感器是目前最为常见的电化学生物传感器,绝大多数葡萄糖生物传感器采用在电极表面修饰葡萄糖氧化酶的方法来制备,但是,在电极的固定化过程中需要酶的纯化,使得成本增加,已成为固定化酶电极开发领域的瓶颈。文中主要以芽孢衣壳蛋白CotX为锚定蛋白将葡萄糖氧化酶(Glucose oxidase,GOD)展示到枯草芽孢杆菌芽孢表面,通过Western blotting分析、免疫荧光分析以及酶活检测均证明GOD在芽孢表面有效表达,发酵获得重组芽孢(Spore-GOD)。再采用滴涂法和电沉积法制备了氧化石墨烯/普鲁士蓝沉积膜修饰玻碳电极,将Spore-GOD固定在修饰电极表面,最后滴加一层Nafion溶液,制成了电化学生物传感器,用于葡萄糖的灵敏测定。葡萄糖在该酶电极传感器上的循环伏安图表明,该反应在0.42V处出现明显的氧化峰,并且氧化还原峰电流与葡萄糖浓度在0.1–7.0mmol/L之间具有良好的线性关系,校正曲线方程为:I=1.3047C_glucose+3.639(R²=0.9929),其检测限为7.5μmol/L(S/N=3)。此修饰电极具有...     

黄曲霉毒素解毒酶的固定化及其性质的研究

黄曲霉毒素是农作物常见的受污染的霉菌毒素,毒性大,稳定性高,是潜在的肝癌致癌物,对人的危害较大。该毒素的解毒与去毒一直是受到关注的问题。黄曲霉毒素解毒酶对黄曲霉毒素有特殊的去毒和降解作用,但是该酶的稳定性离解决实际问题尚有一段距离。报道了对黄曲霉毒素解毒酶的固定化,并对固定化处理后酶的稳定性、性质、催化活性、解毒活性进行了测定。结果表明,通过固定化操作酶的解毒活性被保留下来,酶的酸碱稳定性、热稳定性、放置稳定性等均得到显著的提高。     

基于荧光生物传感器的真菌毒素检测方法研究进展

综述了荧光型真菌毒素检测生物传感器的研究进展，重点介绍了荧光型真菌毒素检测生物传感器的设计及其灵敏度、特异性等性能，分析了黄曲霉毒素等主要毒素的免疫荧光传感器和适配体荧光传感器的检测方法，提出将来的研究可以针对纳米材料/纳米复合材料的表面化学调节，设计用于检测各种分析物的目标特定无标签分析方法，实现毒素的多种同时检测。     

酶蛋白结构稳定性对商品酶电极影响的研究

研究了不同商品来源的葡萄糖氧化酶对商品酶电极制作和生产的影响,酶蛋白分子结构及导电小分子材料的选择对碳电极表面电子传递的作用,商品酶的稳定剂对分子导电体进入生物氧化还原酶活中心的阻碍作用,讨论了规模化生产商品酶电极的方式。     

多壁碳纳米管固定化生物酶修饰电极检测杂色曲霉素的初步研究

色曲霉素（ST）是一种致癌致畸的真菌毒素,已报道的检测ST的技术有TLC、HPLC、ELISA以及毒素基因的PCR检测技术。初步探索了酶生物传感器三电极系统对ST的电化学分析。在实验中,应用多壁碳纳米管作为分子识别元件ADTZ的固定化基质和传感器的电子传递体构建了Au工作电极,对ST进行CV和DPV分析,结果表明：ST在-600mＶ位置有一明显的特征还原峰电位,线性检测范围是8.32×10^-5～6656×10^-5mg/mL,检测下限为8.32×10^-5mg/mL,响应时间10s,为进一步的研究打下良好的基础。     

基于纳米酶的比色生物传感器在生物医学检测中的应用

比色生物传感技术由于具有灵敏度高、方法简单并且容易操作等优点，已广泛应用于生物环境中污染物检测、生物体内重要标志物的检测以及癌症筛查等多个领域。基于纳米酶的比色生物传感器主要是借助纳米酶自身所具有的催化能力，模拟类过氧化物酶活性，将显色剂氧化生成有色溶液，从而实现可视化检测，并通过对有色溶液吸光度的检测得到相关物质的含量。与无纳米酶的比色生物传感器相比，基于纳米酶的比色生物传感器具有选择性更高、检测更快以及灵敏度更高等优点。纳米酶在具有天然酶活性的同时还具有成本低、稳定性好的、易于合成等优点，其相关研究越来越广泛。目前，基于纳米酶的比色生物传感器已成为辅助相关医学检测的重要方法，同时也广泛应用于便携和实时性相关检测当中，为医学检测提供了重要的支持和保障。为了提高比色生物传感器的灵敏度以及应用范围，研究人员也在致力于增加可检测物质的种类以及纳米酶种类的多样化等。本文主要介绍基于纳米酶的比色生物传感器的检测原理、几类典型的纳米酶，以及基于纳米酶的比色生物传感器在生物医学检测领域中的应用情况和研究进展。     

纳米材料固定化酶的研究进展

近年来,纳米技术为酶固定化提供了多种纳米级材料,纳米材料固定化酶不仅具有高的酶负载量,而且具有良好的酶稳定性。本文基于纳米材料固定化酶,对纳米材料的种类进行了总结,分析了纳米材料对固定化酶性能的影响,并介绍了纳米级固定化方法及纳米材料固定化酶在生物转化、生物传感器、生物燃料电池等领域的应用。     

基于酶电极的乳酸检测生物传感器

乳酸(C₃H₆O₃),又名2-羟基丙酸、丙醇酸,属于羟基酸的一种。乳酸在食品工业、临床医学、生物技术等行业具有极其重要的意义,因此如何高通量检测不同样品中的乳酸成为目前业界研究的重点。传统乳酸检测方法操作繁琐、费时费力或需要昂贵的检测设备,乳酸生物传感器可以克服这些限制,不需要样品制备,能够快速、简便、可靠地定量测定食品或血浆中的乳酸,具有广阔的应用前景。乳酸酶电极生物传感器主要有两种类型——基于L-乳酸氧化酶(L-LOD)和L-乳酸脱氢酶(L-LDH)的乳酸生物传感器。本文综述了L-LOD和L-LDH结构特征、来源及催化机理,讨论了改善基于酶电极的乳酸传感器性能的3种策略(电极材料改造策略、酶固定化策略、酶分子工程改造策略),还根据用于制造乳酸生物传感器的不同载体包括膜、透明凝胶基质、水凝胶载体、纳米颗粒等对乳酸生物传感器进行了归类分析,最后本文将目前商品化应用的酶电极乳酸生物传感器特点进行了对比总结讨论,阐述了乳酸生物传感器的未来应用方向,并对未来发展前景进行了展望。     

生物传感器的开发和应用进展

生物传感器的开发和应用进展冯德荣（山东省科学院生物研究所２５００１４）一、生物传感器的特点和原理在生物技术领域迫切需要建立的各种快速分析和优化控制方法中,生物传感器是目前最受到人们注意的一种。生物传感器能对许多过去难于测定的生化物质进行定量分析,已经在实践中开始应用的生物传感器都是固定化酶酶电极,包括葡萄糖、谷氨酸、乳酸、乙醇等多种。     

Multiwalled carbon nanotubes dispersed in carminic acid for the development of catalase based biosensor for selective amperometric determination of H(2)O(2) and iodate

We report the preparation of stable dispersion of multiwalled carbon nanotubes (MWCNTs) using carminic acid (CA) as a dispersing agent. The transmission electron microscopy (TEM), scanning electron microscopy (SEM), and atomic force microscopy (AFM) results confirmed that MWCNT is well dispersed in CA aqueous solution and CA has been well adsorbed at MWCNT walls. Fourier transform infrared (FTIR) and UV-vis absorption spectra results also confirmed the adsorption of CA at MWCNT. To develop a highly selective amperometric biosensor for H(2)O(2) and iodate, the model enzyme catalase (CAT) was immobilized at CACNT modified glassy carbon electrode surface. The immobilized CAT exhibits well defined quasi reversible redox peaks at a formal potential (E°') of -0.559V in 0.05M pH 7 phosphate buffer solution (PBS). The proposed CAT/CACNT biosensor exhibits excellent amperometric response towards H(2)O(2) and iodate in the linear concentration range between 10μM to 3.2mM and 0.01-2.16mM. The sensitivity values are 287.98μAmM(-1)cm(-2) and 0.253mAmM(-1)cm(-2), respectively. Moreover, the developed CAT biosensor exhibits high affinity for H(2)O(2) and iodate with good selectivity.     

Glucose biosensor based on multi-wall carbon nanotubes and screen printed carbon electrodes

This paper describes a disposable electrochemical biosensor for glucose monitoring. The sensor was based on multi-wall carbon nanotubes (MWCNTs) immobilized with glucose oxidase and upon screen printed carbon electrode. The effect of MWCNTs on the response of amperometric glucose oxidase electrode for glucose was examined. Results obtained, of interest for basic and applied biochemistry, represent a first step in construction of a MWCNT-enzyme electrode biosensor with potentialities for a successful application in the biosensor area.     

Electrochemical detection of xanthine in fish meat by xanthine oxidase immobilized on carboxylated multiwalled carbon nanotubes/polyaniline composite film

A commercial xanthine oxidase (XOD) was immobilized covalently onto carboxylated multiwalled carbon nanotubes (c-MWCNT) and polyaniline (PANI) composite film electrodeposited on the surface of a Pt electrode, using N-ethyl-N′-(3-dimethyl aminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry. A xanthine biosensor was fabricated using XOD/c-MWCNT/PANI/Pt electrode as a working electrode, Ag/AgCl (3 M KCl) as standard electrode and Pt wire as auxiliary electrode connected through a potentiostat. The enzyme electrode was characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrophotometry and electrochemical impedance spectroscopy (EIS). The biosensor showed optimum response within 4 s at pH 7.0 and 35 °C, when polarized at 0.4 V. The optimized xanthine biosensor showed linear response range of 0.6–58 μM, with a detection limit of 0.6 μM (S/N = 3), and a correlation coefficient of 0.98. The biosensor was applied to determine xanthine in fish meat. The biosensor lost 50% of its initial activity after its 200 uses over a period of 100 days.     

Study of carbon nanotube modified biosensor for monitoring total cholesterol in blood

A carbon nanotube modified biosensor for monitoring total cholesterol in blood was studied. This sensor consists of a carbon working electrode and a reference electrode screen-printed on a polycarbonate substrate. Cholesterol esterase, cholesterol oxidase, peroxidase and potassium ferrocyanide were immobilized on the screen-printed carbon electrodes. Multi-walled carbon nanotubes (MWCN) were added to prompt electron transfer. Experimental results show that the carbon nanotube modified biosensor offers a reliable calibration profile and stable electrochemical properties.     

Polyphenol biosensor based on laccase immobilized onto silver nanoparticles/multiwalled carbon nanotube/polyaniline gold electrode

Laccase purified from Ganoderma sp. was immobilized covalently onto electrochemically deposited silver nanoparticles (AgNPs)/carboxylated multiwalled carbon nanotubes (cMWCNT)/polyaniline (PANI) layer on the surface of gold (Au) electrode. A polyphenol biosensor was fabricated using this enzyme electrode (laccase/AgNPs/cMWCNT/PANI/Au electrode) as the working electrode, Ag/AgCl as the reference electrode, and platinum (Pt) wire as the auxiliary electrode connected through a potentiostat. The biosensor showed optimal response at pH 5.5 (0.1 M acetate buffer) and 35 °C when operated at a scan rate of 50 mV s⁻¹. Linear range, response time, and detection limit were 0.1–500 μM, 6 s, and 0.1 μM, respectively. The sensor was employed for the determination of total phenolic content in tea, alcoholic beverages, and pharmaceutical formulations. The enzyme electrode was used 200 times over a period of 4 months when stored at 4 °C. The biosensor has an advantage over earlier enzyme sensors in that it has no leakage of enzyme during reuse and is unaffected by the external environment due to the protective PANI microenvironment.     

Direct electrochemistry of glucose oxidase and biosensing for glucose based on boron-doped carbon nanotubes modified electrode

Due to their unique physicochemical properties, doped carbon nanotubes are now extremely attractive and important nanomaterials in bioanalytical applications. In this work, selecting glucose oxidase (GOD) as a model enzyme, we investigated the direct electrochemistry of GOD based on the B-doped carbon nanotubes/glassy carbon (BCNTs/GC) electrode with cyclic voltammetry. A pair of well-defined, quasi-reversible redox peaks of the immobilized GOD was observed at the BCNTs based enzyme electrode in 0.1M phosphate buffer solution (pH 6.98) by direct electron transfer between the protein and the electrode. As a new platform in glucose analysis, the new glucose biosensor based on the BCNTs/GC electrode has a sensitivity of 111.57 microA mM(-1)cm(-2), a linear range from 0.05 to 0.3mM and a detection limit of 0.01mM (S/N=3). Furthermore, the BCNTs modified electrode exhibits good stability and excellent anti-interferent ability to the commonly co-existed uric acid and ascorbic acid. These indicate that boron-doped carbon nanotubes are the good candidate material for the direct electrochemistry of the redox-active enzyme and the construction of the related enzyme biosensors.     

An amperometric oxalate biosensor based on sorghum oxalate oxidase bound carboxylated multiwalled carbon nanotubes-polyaniline composite film

A highly sensitive, specific and rapid electrochemical oxalate biosensor was constructed by covalently immobilizing sorghum leaf oxalate oxidase on carboxylated multiwalled carbon nanotubes and conducting polymer, polyaniline nanocomposite film electrodeposited over the surface of platinum (Pt) wire using N-ethyl-N′-(3-dimethylaminopropyl) carbodiimide (EDC) and N-hydroxy succinimide (NHS) chemistry. The modified electrode was characterized by scanning electron microscopy (SEM) and Fourier transform infrared (FTIR) spectrophotometry. The optimized oxalate biosensor showed linear response range of 8.4-272 μM with correlation coefficient of 0.93 and rapid response within 5 s at a potential of 0.4 V vs Ag/AgCl. The sensitivity was approximately 0.0113 μA/μM with a detection limit of 3.0 μM. Proposed oxalate biosensor was successfully applied to human urine sample.     

An amperometric biosensor based on laccase immobilized onto Fe(3)O(4)NPs/cMWCNT/PANI/Au electrode for determination of phenolic content in tea leaves extract

A method is described for the construction of an amperometric biosensor for detection of phenolic compounds based on covalent immobilization of laccase onto iron oxide nanoparticles (Fe(3)O(4)NPs) decorated carboxylated multiwalled carbon nanotubes (cMWCNTs)/polyaniline (PANI) composite electrodeposited onto a gold (Au) electrode. The modified electrode was characterized by scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS). The biosensor showed optimum response within 3s at pH 6.0 (0.1M sodium acetate buffer) and 35°C, when operated at 0.3V vs. Ag/AgCl. Linear range, detection limit were 0.1-10μM (lower concentration range) and 10-500μM (higher concentration range), and 0.03μM respectively. The sensor measured total phenolic content in tea leaves extract. The enzyme electrode lost 25% of its initial activity after its 150 uses over a period of 4 months, when stored at 4°C.     

Amperometric third-generation hydrogen peroxide biosensor based on the immobilization of hemoglobin on multiwall carbon nanotubes and gold colloidal nanoparticles

A convenient and effective strategy for preparation nanohybrid film of multi-wall carbon nanotubes (MWNT) and gold colloidal nanoparticles (GNPs) by using proteins as linker is proposed. In such a strategy, hemoglobin (Hb) was selected as model protein to fabricate third-generation H2O2 biosensor based on MWNT and GNPs. Acid-pretreated, negatively charged MWNT was first modified on the surface of glassy carbon (GC) electrode, then, positively charged Hb was adsorbed onto MWNT films by electrostatic interaction. The {Hb/GNPs}n multilayer films were finally assembled onto Hb/MWNT film through layer-by-layer assembly technique. The assembly of Hb and GNPs was characterized with cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS) and transmission electron microscopy (TEM). The direct electron transfer of Hb is observed on Hb/GNPs/Hb/MWNT/GC electrode, which exhibits excellent electrocatalytic activity for the reduction of H2O2 to construct a third-generation mediator-free H2O2 biosensor. As compared to those H2O2 biosensors only based on carbon nanotubes, the proposed biosensor modified with MWNT and GNPs displays a broader linear range and a lower detection limit for H2O2 determination. The linear range is from 2.1x10(-7) to 3.0x10(-3) M with a detection limit of 8.0x10(-8) M at 3sigma. The Michaelies-Menten constant KMapp value is estimated to be 0.26 mM. Moreover, this biosensor displays rapid response to H2O2 and possesses good stability and reproducibility.     

黄曲霉毒素氧化酶/壳聚糖-单壁碳纳米管/聚邻苯二胺修饰电极对杂色曲霉素的检测

将黄曲霉毒素氧化酶(AFO)固定在壳聚糖(CS)-单壁碳纳米管(SWCNTs)杂交膜中,组装在聚邻苯二胺(POPD)修饰的金电极(Au)表面,制备了对杂色曲霉素(ST)敏感的生物传感器(AFO/CS-SWCNTs/POPD/Au)。运用原子力显微镜(AFM)、傅立叶变换红外光谱(FT-IR)和交流阻抗技术(EIS)对电极组装过程进行了表征。循环伏安法研究表明,AFO在修饰电极上发生了准可逆的氧化还原反应,是表面控制过程,其式量电位为-0.436V(vs.Ag/AgCl),说明包埋在CS-SWCNTs中的AFO和电极之间发生了直接电子传递。AFO修饰电极对ST具有明显的电催化作用,其表观米氏常数appKM为7.13μmol/L,催化电流与ST浓度在10～310ng/mL范围内呈线性关系,相关系数为0.997,检出限为3ng/mL(S/N=3),响应时间小于10s。组装的生物传感器具有较好的稳定性与重现性,连续检测20ng/mL的ST标准溶液11次,电流值RSD为3.9%;放置一个月后,其电流响应值仍为初始值的85.6%。该方法具有较高的选择性和灵敏度,应用于实际样品检测时,其回收率在87.6%～105.5%之间...