The prion peptide forms ion channels in planar lipid bilayers

One of the hypotheses concerning the pathogenic properties of the prion protein considers its influence on cellular ion homeostasis. Using the lipid bilayer technique, the influence of prion-derived peptides on the lipid bilayer conductance was characterized. To evaluate the physiological significance and possible pathological functions of the peptides, their effect on the membrane potential and respiration rate of hippocampal mitochondria was also studied. We used a peptide bearing the human prion protein sequence YSNQNNF (PrP [169-175]), and peptide SSQNNF (PrP [170-175]) bearing a naturally-occurring mutation in position 171 [N(r)S] linked to schizoaffective diseases in humans (Samaia, H.B., Mari, J.J., Vallada, H.P., Moura R.P., Simpson A.J.G., Brentani R.R. A prion-linked psychiatric disorder. Nature 390 (1997) 241). In this report, we show that PrP [170-175] N171S increases the conductance of planar lipid bilayers. Based on the conductance of single channel currents recorded in 500/500 mM KCl (cis/trans), we found a single channel conductance of 8 to 26 pS. The native prion peptide PrP [169-175] does not form ion channels in the lipid bilayer. Neither of the peptides significantly changed the membrane potential or respiration rate of isolated rat hippocampal mitochondria. We propose a possible mechanism for channel formation by aggregation of the prion-derived peptide.     

Cholesterol-modulated ion channel activity in tonoplast vesicles: a planar lipid bilayer study

The reconstitution of native tonoplast vesicles from Commelinacommunis guard cell protoplasts into cholesterol-free planarlipid bilayers revealed single ion channel activity. An 8.1pS ion channel was found to have a low selectivity for cationsover anions (P_K: P_Cl = 1: 0.83) in asymmetrical conditions (100cis: 10 trans mM KCI). Addition of cholesterol (50 mol%) tothe bilayer induced instantaneous and reversible closure ofthe channel. Key words: Cholesterol, ion channel, planar lipid bilayer, tonoplast     

Antimicrobial Protegrin-1 Forms Ion Channels: Molecular Dynamic Simulation, Atomic Force Microscopy, and Electrical Conductance Studies

Antimicrobial peptides (AMPs) are an emerging class of antibiotics for controlling health effects of antibiotic-resistant microbial strains. Protegrin-1 (PG-1) is a model antibiotic among β-sheet AMPs. Antibiotic activity of AMPs involves cell membrane damage, yet their membrane interactions, their 3D membrane-associated structures and the mechanism underlying their ability to disrupt cell membrane are poorly understood. Using complementary approaches, including molecular dynamics simulations, atomic force microscopy (AFM) imaging, and planar lipid bilayer reconstitution, we provide computational and experimental evidence that PG-1, a β-hairpin peptide, forms ion channels. Simulations indicate that PG-1 forms channel-like structures with loosely attached subunits when reconstituted in anionic lipid bilayers. AFM images show the presence of channel-like structures when PG-1 is reconstituted in dioleoylphosphatidylserine/palmitoyloleoyl phosphatidylethanolamine bilayers or added to preformed bilayers. Planar lipid bilayer electrical recordings show multiple single channel conductances that are consistent with the heterogeneous oligomeric channel structures seen in AFM images. PG-1 channel formation seems to be lipid-dependent: PG-1 does not easily show ion channel electrical activity in phosphatidylcholine membranes, but readily shows channel activity in membranes rich in phosphatidylethanolamine or phosphatidylserine. The combined results support a model wherein the β-hairpin PG-1 peptide acts as an antibiotic by altering cell ionic homeostasis through ion channel formation in cell membranes.     

Calcium channel activity in a purified dihydropyridine-receptor preparation of skeletal muscle

A purified dihydropyridine-receptor complex (DHPR) of skeletal muscle consisting of a major polypeptide of Mr 150K under reducing conditions induces divalent cation selective channels when incorporated into planar lipid bilayers. Channels were inserted into preformed planar bilayers by two techniques: (i) direct dilution of detergent-solubilized DHPR into the aqueous chambers adjacent to the bilayer membrane or (ii) reconstitution of DHPR into phospholipid vesicles followed by fusion of the preformed vesicles to the planar bilayer membrane. Unlike native membrane preparations of t-tubules, which only have one major Ca channel type of slope conductance of 12 pS in symmetrical 100 mM Ba, the purified DHPR complex induced at least two channel types with conductances of 12-14 and 22 pS. Some recordings suggest that these two channels are statistically coupled in time, i.e., that they may correspond to substrates of the same DHPR channel. Activity was found to occur spontaneously in the absence of the Ca channel agonist Bay k 8644. The 12-14-pS channel from DHPR exhibits voltage-dependent kinetics, is highly selective for barium ions, and was inhibited by micromolar nitrendipine. The 12-14-pS DHPR channel appears to be identical with functional Ca channels previously described in native t-tubules.     

Charge-transfer processes and redox reactions in planar lipid monolayers and bilayers

Supported bilayer lipid membranes (BLMs) and lipid monolayers have been known for quite sometime and are attracting sustained interest since they open new research vista and offer practical approaches in biosensor development and molecular device applications. Central to these areas of interest are electric processes and redox reactions where the movement of ions and electrons plays a pivotal role. In this paper an overview of the major findings in this field is presented. Further, we summarize the work on planar lipid bilayers and monolayers that have been done in the past few years in a number of laboratories. Supported planar BLMs and their closely related systems provide the foundation for a variety of lipid bilayer-based molecular sensors that are sensitive, versatile, as well as potentially inexpensive (i.e., disposable), and open to all sorts of experimentation.     

Water and ion permeation of aquaporin-1 in planar lipid bilayers. Major differences in structural determinants and stoichiometry.

The aquaporin-1 (AQP1) water channel protein is known to facilitate the rapid movement of water across cell membranes, but a proposed secondary role as an ion channel is still unsettled. Here we describe a method to simultaneously measure water permeability and ion conductance of purified human AQP1 after reconstitution into planar lipid bilayers. Water permeability was determined by measuring Na(+) concentrations adjacent to the membrane. Comparisons with the known single channel water permeability of AQP1 indicate that the planar lipid bilayers contain from 10(6) to 10(7) water channels. Addition of cGMP induced ion conductance in planar bilayers containing AQP1, whereas cAMP was without effect. The number of water channels exceeded the number of active ion channels by approximately 1 million-fold, yet p-chloromethylbenzenesulfonate inhibited the water permeability but not ion conductance. Identical ion channel parameters were achieved with AQP1 purified from human red blood cells or AQP1 heterologously expressed in Saccharomyces cerevisae and affinity purified with either N- or C-terminal poly-histidine tags. Rp-8-Br-cGMP inhibited all of the observed conductance levels of the cation selective channel (2, 6, and 10 pS in 100 mm Na(+) or K(+)). Deletion of the putative cGMP binding motif at the C terminus by introduction of a stop codon at position 237 yielded a truncated AQP1 protein that was still permeated by water but not by ions. Our studies demonstrate a method for simultaneously measuring water permeability and ion conductance of AQP1 reconstituted into planar lipid bilayers. The ion conductance occurs (i) through a pathway distinct from the aqueous pathway, (ii) when stimulated directly by cGMP, and (iii) in only an exceedingly small fraction of AQP1 molecules.     

Reconstitution of ion channels in agarose-supported silicon orifices

A silicon wafer with eight individually addressable microfabricated orifices was used for ion channel reconstitution and single-channel recording. A spin-on fluoropolymer created an insulating, hydrophobic interface that was more stable than silane. Total capacitance of the membranes was <10 pF, making it easy to evaluate bilayer formation by capacitance change. Orifices of 50-250 microm diameter were tested for ease and stability of bilayer formation; only those >100 microm resulted in ion channel function. Bilayers were formed over an agarose supporting layer by application of lipid in decane with a paintbrush; a second layer of agarose could then be added to stabilize the structure and prevent evaporation. Microfluidic wells were constructed on glass plates for ease of assembly and visualization of fluid flow, as well as high-resolution microscopy for studies using fluorescent lipids and channels. The microfluidics consisted of reversibly bonded silicone rubber (PDMS), so that the entire device could be washed and reused. Total electrical noise in the device was low enough to permit single-channel resolution. Successful channel insertions were observed with a self-assembling ionophore (alamethicin) as well as a complex, vesicle-associated mammalian channel (human glycine receptor, GlyR). A "hands-free" approach to bilayer formation was also tested, where lipid in solvent was applied to the wafer by spin-coating, dried, and then "sandwiched" between layers of agarose above and below the nitride. Electrical properties consistent with bilayers were observed and alamethicin recordings were obtained, however this method is not compatible with the fusion of vesicles containing mammalian channels.     

Preparation of Artificial Bilayers for Electrophysiology Experiments

Planar lipid bilayers, also called artificial lipid bilayers, allow you to study ion-conducting channels in a well-defined environment. These bilayers can be used for many different studies, such as the characterization of membrane-active peptides, the reconstitution of ion channels or investigations on how changes in lipid bilayer properties alter the function of bilayer-spanning channels. Here, we show how to form a planar bilayer and how to isolate small patches from the bilayer, and in a second video will also demonstrate a procedure for using gramicidin channels to determine changes in lipid bilayer elastic properties. We also demonstrate the individual steps needed to prepare the bilayer chamber, the electrodes and how to test that the bilayer is suitable for single-channel measurements.Download video file.^{(111M, mp4)}     

Ion channel and toxin measurement using a high throughput lipid membrane platform

Measurements of ion channels are important for scientific, sensing and pharmaceutical applications. Reconstitution of ion channels into lipid vesicles and planar lipid bilayers for measurement at the single molecule level is a laborious and slow process incompatible with the high throughput methods and equipment used for sensing and drug discovery. A recently published method of lipid bilayer formation mechanically combines lipid monolayers self-assembled at the interfaces of aqueous and apolar phases. We have expanded on this method by vertically orienting these phases and using gravity as the driving force to combine the monolayers. As this method only requires fluid dispensation, it is trivially integrated with high throughput automated liquid-handling robotics. In a proof-of-concept demonstration, we created over 2200 lipid bilayers in 3h. We show single molecule measurements of technologically and physiologically relevant ion channels incorporated into lipid bilayers formed with this method.     

Viral ion channel proteins in model membranes: a comparative study by X-ray reflectivity

We have investigated the effect of the transmembrane domain of three viral ion channel proteins on the lipid bilayer structure by X-ray reflectivity and scattering from oriented planar bilayers. The proteins show a similar effect on the lipid bilayer structural parameters: an increase in the lipid bilayer hydrophobic core, a decrease in the amplitude of the vertical density profile and a systematic change in the ordering of the acyl chains as a function of protein-to-lipid ratio. These results are discussed in a comparative view.     

Membrane surface-charge titration probed by gramicidin A channel conductance.

We manipulate lipid bilayer surface charge and gauge its influence on gramicidin A channel conductance by two strategies: titration of the lipid charge through bulk solution pH and dilution of a charged lipid by neutral. Using diphytanoyl phosphatidylserine (PS) bilayers with CsCl aqueous solutions, we show that the effects of lipid charge titration on channel conductance are masked 1) by conductance saturation with Cs+ ions in the neutral pH range and 2) by increased proton concentration when the bathing solution pH is less than 3. A smeared charge model permits us to separate different contributions to the channel conductance and to introduce a new method for "bilayer pKa" determination. We use the Gouy-Chapman expression for the charged surface potential to obtain equilibria of protons and cations with lipid charges. To calculate cation concentration at the channel mouth, we compare different models for the ion distribution, exact and linearized forms of the planar Poisson-Boltzmann equation, as well as the construction of a "Gibbs dividing surface" between salt bath and charged membrane. All approximations yield the intrinsic pKain of PS lipid in 0.1 M CsCl to be in the range 2.5-3.0. By diluting PS surface charge at a fixed pH with admixed neutral diphytanoyl phosphatidylcholine (PC), we obtain a conductance decrease in magnitude greater than expected from the electrostatic model. This observation is in accord with the different conductance saturation values for PS and PC lipids reported earlier (, Biochim. Biophys. Acta. 552:369-378) and verified in the present work for solvent-free membranes. In addition to electrostatic effects of surface charge, gramicidin A channel conductance is also influenced by lipid-dependent structural factors.     

The Proapoptotic Influenza A Virus Protein PB1-F2 Forms a Nonselective Ion Channel

Background

PB1-F2 is a proapoptotic influenza A virus protein of approximately 90 amino acids in length that is located in the nucleus, cytosol and in the mitochondria membrane of infected cells. Previous studies indicated that the molecule destabilizes planar lipid bilayers and has a strong inherent tendency for multimerization. This may be correlate with its capacity to induce mitochondrial membrane depolarization.

Methodology/Principal Findings

Here, we investigated whether PB1-F2 is able to form ion channels within planar lipid bilayers and microsomes. For that purpose, a set of biologically active synthetic versions of PB1-F2 (sPB1-F2) derived from the IAV isolates A/Puerto Rico/8/34(H1N1) (IAV_PR8), from A/Brevig Mission/1/1918(H1N1) (IAV_SF2) or the H5N1 consensus sequence (IAV_BF2) were used. Electrical and fluorimetric measurements show that all three peptides generate in planar lipid bilayers or in liposomes, respectively, a barely selective conductance that is associated with stochastic channel type fluctuations between a closed state and at least two defined open states. Unitary channel fluctuations were also generated when a truncated protein comprising only the 37 c-terminal amino acids of sPB1-F2 was reconstituted in bilayers. Experiments were complemented by extensive molecular dynamics simulations of the truncated fragment in a lipid bilayer. The results indicate that the c-terminal region exhibits a slightly bent helical fold, which is stable and remains embedded in the bilayer for over 180 ns.

Conclusion/Significance

The data support the idea that PB1-F2 is able to form protein channel pores with no appreciable selectivity in membranes and that the c-terminus is important for this function. This information could be important for drug development.     

The antibacterial peptide ceratotoxin A displays alamethicin-like behavior in lipid bilayers

Ceratotoxin A (CtxA), a 36-residue alpha-helical cationic peptide isolated from the medfly Ceratitis capitata, exhibits strong antibacterial activity. To determine its mode of action against bacteria, we investigated the behavior of ceratotoxin A by incorporating it into planar lipid bilayers. Macroscopic and single channel conductance experiments showed that ceratotoxin A forms voltage-dependent ion channels in bilayers according to the barrel-stave model. The characteristics of the channel suggest that the C-terminal regions form bundles of five or six helices embedded in the membrane, such that the N-terminal moieties lie on the polar side of the lipid bilayer.     

Bilayer reconstitution of voltage-dependent ion channels using a microfabricated silicon chip

Painted bilayers containing reconstituted ion channels serve as a well defined model system for electrophysiological investigations of channel structure and function. Horizontally oriented bilayers with easy solution access to both sides were obtained by painting a phospholipid:decane mixture across a cylindrical pore etched into a 200-microm thick silicon wafer. Silanization of the SiO(2) layer produced a hydrophobic surface that promoted the adhesion of the lipid mixture. Standard lithographic techniques and anisotropic deep-reactive ion etching were used to create pores with diameters from 50 to 200 microm. The cylindrical structure of the pore in the partition and the surface treatment resulted in stable bilayers. These were used to reconstitute Maxi K channels in the 100- and 200-microm diameter pores. The electrophysiological characteristics of bilayers suspended in microchips were comparable with that of other bilayer preparations. The horizontal orientation and good voltage clamping properties make the microchip bilayer method an excellent system to study the electrical properties of reconstituted membrane proteins simultaneously with optical probes.     

Apolipoproteins L1-6 share key cation channel-regulating residues but have different membrane insertion and ion conductance properties

The human apolipoprotein L gene family encodes the apolipoprotein L1–6 (APOL1–6) proteins, which are effectors of the innate immune response to viruses, bacteria and protozoan parasites. Due to a high degree of similarity between APOL proteins, it is often assumed that they have similar functions to APOL1, which forms cation channels in planar lipid bilayers and membranes resulting in cytolytic activity. However, the channel properties of the remaining APOL proteins have not been reported. Here, we used transient overexpression and a planar lipid bilayer system to study the function of APOL proteins. By measuring lactate dehydrogenase release, we found that APOL1, APOL3, and APOL6 were cytolytic, whereas APOL2, APOL4, and APOL5 were not. Cells expressing APOL1 or APOL3, but not APOL6, developed a distinctive swollen morphology. In planar lipid bilayers, recombinant APOL1 and APOL2 required an acidic environment for the insertion of each protein into the membrane bilayer to form an ion conductance channel. In contrast, recombinant APOL3, APOL4, and APOL5 readily inserted into bilayers to form ion conductance at neutral pH, but required a positive voltage on the side of insertion. Despite these differences in membrane insertion properties, the ion conductances formed by APOL1-4 were similarly pH-dependent and cation-selective, consistent with conservation of the pore-lining region in each protein. Thus, despite structural conservation, the APOL proteins are functionally different. We propose that these proteins interact with different membranes and under different voltage and pH conditions within a cell to effect innate immunity to different microbial pathogens.     

Regulation of epithelial Na(+) channels by actin in planar lipid bilayers and in the Xenopus oocyte expression system

The hypothesis that actin interactions account for the signature biophysical properties of cloned epithelial Na(+) channels (ENaC) (conductance, ion selectivity, and long mean open and closed times) was tested using planar lipid bilayer reconstitution and patch clamp techniques. We found the following. 1) In bilayers, actin produced a more than 2-fold decrease in single channel conductance, a 5-fold increase in Na(+) versus K(+) permselectivity, and a substantial increase in mean open and closed times of wild-type alphabetagamma-rENaC but had no effect on a mutant form of rENaC in which the majority of the C terminus of the alpha subunit was deleted (alpha(R613X)betagamma-rENaC). 2) When alpha(R613X)betagamma-rENaC was heterologously expressed in oocytes and single channels examined by patch clamp, 12.5-pS channels of relatively low cation permeability were recorded. These characteristics were identical to those recorded in bilayers for either alpha(R613X)betagamma-rENaC or wild-type alphabetagamma-rENaC in the absence of actin. Moreover, we show that rENaC subunits tightly associate, forming either homo- or heteromeric complexes when prepared by in vitro translation or when expressed in oocytes. Finally, we show that alpha-rENaC is properly assembled but retained in the endoplasmic reticulum compartment. We conclude that actin subserves an important regulatory function for ENaC and that planar bilayers are an appropriate system in which to study the biophysical and regulatory properties of these cloned channels.     

Assessing the efficacy of vesicle fusion with planar membrane arrays using a mitochondrial porin as reporter

Reconstitution of functionally active membrane protein into artificially made lipid bilayers is a challenge that must be overcome to create a membrane-based biomimetic sensor and separation device. In this study we address the efficacy of proteoliposome fusion with planar membrane arrays. We establish a protein incorporation efficacy assay using the major non-specific porin of Fusobacterium nucleatum (FomA) as reporter. We use electrical conductance measurements and fluorescence microscopy to characterize proteoliposome fusion with an array of planar membranes. We show that protein reconstitution in biomimetic membrane arrays may be quantified using the developed FomA assay. Specifically, we show that FomA vesicles are inherently fusigenic. Optimal FomA incorporation is obtained with a proteoliposome lipid-to-protein molar ratio (LPR) = 50 more than 10⁵ FomA proteins could be incorporated in a bilayer array with a total membrane area of 2 mm² within 20 min. This novel assay for quantifying protein delivery into lipid bilayers may be a useful tool in developing biomimetic membrane applications.     

Tuning ion channel mechanosensitivity by asymmetry of the transbilayer pressure profile

Mechanical stimuli acting on the cellular membrane are linked to intracellular signaling events and downstream effectors via different mechanoreceptors. Mechanosensitive (MS) ion channels are the fastest known primary mechano-electrical transducers, which convert mechanical stimuli into meaningful intracellular signals on a submillisecond time scale. Much of our understanding of the biophysical principles that underlie and regulate conversion of mechanical force into conformational changes in MS channels comes from studies based on MS channel reconstitution into lipid bilayers. The bilayer reconstitution methods have enabled researchers to investigate the structure-function relationship in MS channels and probe their specific interactions with their membrane lipid environment. This brief review focuses on close interactions between MS channels and the lipid bilayer and emphasizes the central role that the transbilayer pressure profile plays in mechanosensitivity and gating of these fascinating membrane proteins.     

Formation and characterization of planar lipid bilayer membranes from synthetic phytanyl-chained glycolipids

The formability, current-voltage characteristics and stability of the planar lipid bilayer membranes from the synthetic phytanyl-chained glycolipids, 1, 3-di-O-phytanyl-2-O-(beta-glycosyl)glycerols (Glc(Phyt)(2), Mal(N)(Phyt)(2)) were studied. The single bilayer membranes were successfully formed from the glycolipid bearing a maltotriosyl group (Mal(3)(Phyt)(2)) by the folding method among the synthetic glycolipids examined. The membrane conductance of Mal(3)(Phyt)(2) bilayers in 100 mM KCl solution was significantly lower than that of natural phospholipid, soybean phospholipids (SBPL) bilayers, and comparable to that of 1,2-diphytanoyl-sn-glycero-3-phosphocholine (DPhPC) bilayers. From the permeation measurements of lipophilic ions through Mal(3)(Phyt)(2) and DPhPC bilayers, it could be presumed that the carbonyl groups in glycerol backbone of the lipid molecule are not necessarily required for the total dipole potential barrier against cations in Mal(3)(Phyt)(2) bilayer. The stability of Mal(3)(Phyt)(2) bilayers against long-term standing and external electric field change was rather high, compared with SBPL bilayers. Furthermore, a preliminary experiment over the functional incorporation of membrane proteins was demonstrated employing the channel proteins derived from octopus retina microvilli vesicles. The channel proteins were functionally incorporated into Mal(3)(Phyt)(2) bilayers in the presence of a negatively charged glycolipid. From these observations, synthetic phytanyl-chained glycolipid bilayers are promising materials for reconstitution and transport studies of membrane proteins.     

Shaped Apertures in Photoresist Films Enhance the Lifetime and Mechanical Stability of Suspended Lipid Bilayers

Planar lipid bilayers suspended in apertures provide a controlled environment for ion channel studies. However, short lifetimes and poor mechanical stability of suspended bilayers limit the experimental throughput of bilayer electrophysiology experiments. Although bilayers are more stable in smaller apertures, ion channel incorporation through vesicle fusion with the suspended bilayer becomes increasingly difficult. In an alternative bilayer stabilization approach, we have developed shaped apertures in SU8 photoresist that have tapered sidewalls and a minimum diameter between 60 and 100 μm. Bilayers formed at the thin tip of these shaped apertures, either with the painting or the folding method, display drastically increased lifetimes, typically >20 h, and mechanical stability, being able to withstand extensive perturbation of the buffer solution. Single-channel electrical recordings of the peptide alamethicin and of the proteoliposome-delivered potassium channel KcsA demonstrate channel conductance with low noise, made possible by the small capacitance of the 50 μm thick SU8 septum, which is only thinned around the aperture, and unimpeded proteoliposome fusion, enabled by the large aperture diameter. We anticipate that these shaped apertures with micrometer edge thickness can substantially enhance the throughput of channel characterization by bilayer lipid membrane electrophysiology, especially in combination with automated parallel bilayer platforms.