Alkaline transition of pseudoazurin Met16X mutant proteins: protein stability influenced by the substitution of Met16 in the second sphere coordination

Several blue copper proteins are known to change the active site structure at alkaline pH (alkaline transition). Spectroscopic studies of Met16Phe, Met16Tyr, Met16Trp, and Met16Val pseudoazurin variants were performed to investigate the second sphere role through alkaline transition. The visible electronic absorption and resonance Raman spectra of Met16Phe, Met16Tyr, and Met16Trp variants showed the increasing of axial component at pH 11 like wild-type PAz. The visible electronic absorption and far-UV CD spectra of Met16Val demonstrated that the destabilization of the protein structure was triggered at pH > 11. Resonance Raman (RR) spectra of PAz showed that the intensity-weighted averaged Cu–S(Cys) stretching frequency was shifted to higher frequency region at pH 11. The higher frequency shift of Cu–S(Cys) bond is implied the stronger Cu–S(Cys) bond at alkaline transition pH 11. The visible electronic absorption and far-UV CD spectra of Met16X PAz revealed that the Met16Val variant is denatured at pH > 11, but Met16Phe, Met16Tyr, and Met16Trp mutant proteins are not denatured even at pH > 11. These observations suggest that Met16 is important to maintain the protein structure through the possible weak interaction between methionine –SCH₃ part and coordinated histidine imidazole moiety. The introduction of π–π interaction in the second coordination sphere may be contributed to the enhancement of protein structure stability.     

Non-covalent interactions in blue copper protein probed by Met16 mutation and electronic and resonance Raman spectroscopy of Achromobacter cycloclastes pseudoazurin

We have used low-temperature (77 K) resonance Raman (RR) spectroscopy as a probe of the electronic and molecular structure to investigate weak π-π interactions between the metal ion-coordinated His imidazoles and aromatic side chains in the second coordination sphere of blue copper proteins. For this purpose, the RR spectra of Met16 mutants of Achromobacter cycloclastes pseudoazurin (AcPAz) with aromatic (Met16Tyr, Met16Trp, and Met16Phe) and aliphatic (Met16Ala, Met16Val, Met16Leu, and Met16Ile) amino acid side chains have been obtained and analyzed over the 100-500 cm⁻¹ spectral region. Subtle strengthening of the Cu(II)-S(Cys) interaction on replacing Met16 with Tyr, Trp, and Phe is indicated by the upshifted (0.3-0.8 cm⁻¹) RR bands involving ν(Cu-S)_Cys stretching modes. In contrast, the RR spectra of Met16 mutants with aliphatic amino acids revealed larger (0.2-1.8 cm⁻¹) shifts of the ν(Cu-S)_Cys stretching modes to a lower frequency region, which indicate a weakening of the Cu(II)-S(Cys) bond. Comparisons of the predominantly ν(Cu-S)_Cys stretching RR peaks of the Met16X = Tyr, Trp, and Phe variants, with the molar absorptivity ratio ε₁/ε₂ of σ(∼455 nm)/π(∼595 nm) (Cys)S → Cu(II) charge-transfer bands in the optical spectrum and the axial/rhombic EPR signals, revealed a slightly more trigonal disposition of ligands about the copper(II) ion. In contrast, the RR spectra of Met16Z = Ala, Val, Leu, and Ile variants with aliphatic amino acid side chains show a more tetrahedral perturbation of the copper active site, as judged by the lower frequencies of the ν(Cu-S)_Cys stretching modes, much larger values of the ε₁/ε₂ ratio, and the increased rhombicity of the EPR spectra.     

Improvement in the alkaline stability of subtilisin using an efficient random mutagenesis and screening procedure

An efficient random mutagenesis procedure coupled to a replica plate screen facilitated the isolation of mutant subtilisins from Bacillus amyloliquefaciens that had altered autolytic stability under alkaline conditions. Out of about 4000 clones screened, approximately 70 produced subtilisins with reduced stability (negatives). Two clones produced a more stable subtilisin (positives) and were identified as having a single mutation, either Ile107Val or Lys213Arg (the wild-type amino acid is followed by the codon position and the mutant amino acid). One of the negative mutants, Met50Val, was at a site where other homologous subtilisins contained a Phe. When the Met50Phe mutation was introduced into the B. amyloliquefaciens gene, the mutant subtilisin was more alkaline stable. The double mutant (Ile107Val/Lys213Arg) was more stable than the isolated single mutant parents. The triple mutant (Met50Phe/Ile107Val/Lys213Arg) was even more stable than Ile107Val/Lys213Arg (up to two times the autolytic half-time of wild-type at pH 12). These studies demonstrate the feasibility for improving the alkaline stability of proteins by random mutagenesis and identifying potential sites where substitutions from homologous proteins can improve alkaline stability.     

Contribution of the 30/36 hydrophobic contact at the C-terminus of the alpha-helix to the stability of the ubiquitin molecule

The contribution of the hydrophobic contact in the C-capping motif of the alpha-helix to the thermodynamic stability of the ubiquitin molecule has been analyzed. For this, 16 variants of ubiquitin containing the full combinatorial set of four nonpolar residues Val, Ile, Leu, and Phe at C4 (Ile30) and C' ' (Ile36) positions were generated. The secondary structure content as estimated using far-UV circular dichroism (CD) spectroscopy of all but Phe variants at position 30 did not show notable changes upon substitutions. The thermodynamic stability of these ubiquitin variants was measured using differential scanning calorimetry, and it was shown that all variants have lower stability as measured by decreases in the Gibbs energy. Since in some cases the decrease in stability was so dramatic that it rendered an unfolded protein, it was therefore concluded that, despite apparent preservation of the secondary structure, the 30/36 hydrophobic contact is essential for the stability of the ubiquitin molecule. The decrease in the Gibbs energy in many cases was found to be accompanied by a large (up to 25%) decrease in the enthalpy of unfolding, particularly significant in the variants containing Ile to Leu substitutions. This decrease in enthalpy of unfolding is proposed to be primarily the result of the perturbed packing interactions in the native state of the Ile --> Leu variants. The analysis of these data and comparison with effects of similar amino acid substitutions on the stability of other model systems suggest that Ile --> Leu substitutions cannot be isoenergetic at the buried site.     

Purification,Partial Characterizations,and N‐Terminal Amino Acid Sequence of a Procoagulant Protein FV‐2 from Daboia Russelli Siamensis (Myanmar) Venom

In this study, we purified and characterized the procoagulant protein FV‐2 from Daboia russelli siamensis (Myanmar) venom using ion‐exchange chromatography on CM‐Sephadex C‐50 and gel filtration on Superdex^TM G‐75 column. The activation of factor X and prothrombin was determined, respectively, by specific chromogenic substrates. The fibrinogen‐clotting activity, thermal stability, and pH stability were also determined. The N‐treminal sequence was determined by the National Center of Biomedical Analysis of China. In the end, FV‐2 was achieved with a molecular weight of 13,608.0 Da. It could activate factor X, but did not affect prothrombin or fibrinogen. The suitable pH was 6.5–7.5, and the suitable temperature ranged from 25 to 60°C. The N‐terminal sequence was Asn‐Phe‐Phe‐Gln‐Phe‐Ala‐Glu‐Met‐Ile‐Val‐Lys‐Met‐Thr‐Gly‐Lys. Taken together, our studies suggest that FV‐2 is a factor X–activating enzyme, which can activate factor X to factor Xa, but it has no effect on prothrombin and fibrinogen.     

Thermodynamic characterization of variants of mesophilic cytochrome c and its thermophilic counterpart

Thermal stability was measured for variants of cytochrome c-551 (PA c-551) from a mesophile, Pseudomonas aeruginosa, and a thermophilic counterpart, Hydrogenobacter thermophilus cytochrome c-552 (HT c-552), by differential scanning calorimetry (DSC) at pH 3.6. The mutated residues in PA c-551, selected with reference to the corresponding residues in HT c-552, were located in three spatially separated regions: region I, Phe7 to Ala/Val13 to Met; region II, Glu34 to Tyr/Phe43 to Tyr; and region III, Val78 to Ile. The thermodynamic parameters determined indicated that the mutations in regions I and III caused enhanced stability through not only enthalpic but also entropic contributions, which reflected improved packing of the side chains. Meanwhile, the mutated region II made enthalpic contributions to the stability through electrostatic interactions. The obtained differences in the Gibbs free energy changes of unfolding [Delta(DeltaG)] showed that the three regions contributed to the overall stability in an additive manner. HT c-552 had the smallest heat capacity change (DeltaC(P)), resulting in higher DeltaG values over a wide temperature range (0-100 degrees C), compared to the PA c-551 variants; this contributed to the highest stability of HT c-552. Our DSC measurement results, in conjunction with mutagenesis and structural studies on the homologous mesophilic and thermophilic cytochromes c, provided an extended thermodynamic view of protein stabilization.     

Predicting the side‐chain dihedral angle distributions of nonpolar,aromatic, and polar amino acids using hard sphere models

The side‐chain dihedral angle distributions of all amino acids have been measured from myriad high‐resolution protein crystal structures. However, we do not yet know the dominant interactions that determine these distributions. Here, we explore to what extent the defining features of the side‐chain dihedral angle distributions of different amino acids can be captured by a simple physical model. We find that a hard‐sphere model for a dipeptide mimetic that includes only steric interactions plus stereochemical constraints is able to recapitulate the key features of the back‐bone dependent observed amino acid side‐chain dihedral angle distributions of Ser, Cys, Thr, Val, Ile, Leu, Phe, Tyr, and Trp. We find that for certain amino acids, performing the calculations with the amino acid of interest in the central position of a short α‐helical segment improves the match between the predicted and observed distributions. We also identify the atomic interactions that give rise to the differences between the predicted distributions for the hard‐sphere model of the dipeptide and that of the α‐helical segment. Finally, we point out a case where the hard‐sphere plus stereochemical constraint model is insufficient to recapitulate the observed side‐chain dihedral angle distribution, namely the distribution P(χ₃) for Met. Proteins 2014; 82:2574–2584. © 2014 Wiley Periodicals, Inc.     

Direct and indirect roles of His‐418 in metal binding and in the activity of β‐galactosidase (E. coli)

The active site of ß‐galactosidase (E. coli) contains a Mg²⁺ ion ligated by Glu‐416, His‐418 and Glu‐461 plus three water molecules. A Na⁺ ion binds nearby. To better understand the role of the active site Mg²⁺ and its ligands, His‐418 was substituted with Asn, Glu and Phe. The Asn‐418 and Glu‐418 variants could be crystallized and the structures were shown to be very similar to native enzyme. The Glu‐418 variant showed increased mobility of some residues in the active site, which explains why the substitutions at the Mg²⁺ site also reduce Na⁺ binding affinity. The Phe variant had reduced stability, bound Mg²⁺ weakly and could not be crystallized. All three variants have low catalytic activity due to large decreases in the degalactosylation rate. Large decreases in substrate binding affinity were also observed but transition state analogs bound as well or better than to native. The results indicate that His‐418, together with the Mg²⁺, modulate the central role of Glu‐461 in binding and as a general acid/base catalyst in the overall catalytic mechanism. Glucose binding as an acceptor was also dramatically decreased, indicating that His‐418 is very important for the formation of allolactose (the natural inducer of the lac operon).     

A general method for preparation of N‐Boc‐protected or N‐Fmoc‐protected α,β‐didehydropeptide building blocks and their use in the solid‐phase peptide synthesis

N‐(tert‐butyloxycarbonyl) or N‐(9‐fluorenylmethoxycarbonyl) dipeptides with C‐terminal (Z)‐α,β‐didehydrophenylalanine (?^ZPhe), (Z)‐α,β‐didehydrotyrosine (?^ZTyr), (Z)‐α,β‐didehydrotryptophan (?^ZTrp), (Z)‐α,β‐didehydromethionine (?^ZMet), (Z)‐α,β‐didehydroleucine (?^ZLeu), and (Z/E)‐α,β‐didehydroisoleucine (?^Z/EIle) were synthesised from their saturated analogues via oxidation of intermediate 2,5‐disubstituted‐oxazol‐5‐(4H)‐ones (also known as azlactones) with pyridinium tribromide followed by opening of the produced unsaturated oxazol‐5‐(4H)‐one derivatives in organic‐aqueous solution with a catalytic amount of trifluoroacetic acid or by a basic hydrolysis. In all cases, a very strong preference for Z isomers of α,β‐didehydro‐α‐amino acid residues was observed except of the ΔIle, which was obtained as the equimolar mixture of Z and E isomers. Reasons for the (Z)‐stereoselectivity and the increased stability of the aromatic α,β‐didehydro‐α‐amino acid residue oxazol‐5‐(4H)‐ones over the corresponding aliphatic ones are also discussed. It is the first use of such a procedure to synthesise peptides with the C‐terminal unsaturated residues and a peptide with 2 consecutive ΔPhe residues. This approach is very effective especially in the synthesis of peptides with aliphatic α,β‐didehydro‐α‐amino acid residues that are difficult to obtain by other methods. It allowed the first synthesis of the ?Met residue. It is also more cost‐effective and less laborious than other synthesis protocols. The dipeptide building blocks obtained were used in the solid‐phase synthesis of model peptides on a polystyrene‐based solid support. Peptides containing aromatic α,β‐didehydro‐α‐amino acid residues were obtained with PyBOP or TBTU as a coupling agent with good yields and purities. In the case of aliphatic α,β‐didehydro‐α‐amino acid residues, a good efficiency was achieved only with DPPA as a coupling agent.     

The β‐sheet breakers and π‐stacking

Fibrillation of β‐amyloid is recognized as a key process leading to the development of Alzheimer's disease. Small peptides called β‐sheet breakers were found to inhibit the process of β‐amyloid fibrillation and to dissolve amyloid fibrils in vitro, in vivo, and in cell culture studies [1,2]. The mechanism by which peptide inhibition takes place remains elusive and a detailed model needs to be established. Here, we present new insights into the possible role of consecutive Phe residues, present in the structure of β‐sheet breakers, supported by the results obtained by means of MD simulations. We performed a 30‐ns MD of two β‐sheet breakers: iAβ5 (LPFFD) and iAβ6 (LPFFFD) which have two and three consecutive Phe residues, respectively. We have found that Phe rings in these peptides tend to form stacked conformations. For one of the peptides – iAβ6 – the calculated electrostatic contribution to free energy of one of the conformers with three rings stacked (c2) is significantly lower than that corresponding to the unstacked one (c1), two rings stacked (c0) and second conformer with three rings stacked (c3). This may favor the interaction of the c2 conformer with the target on amyloid fibril. We hypothesize that the mechanism of inhibition of amyloidogenesis by β‐sheet breaker involves competition among π‐stacked Phe residues of the inhibitor and π‐stacking within the β‐amyloid fibril. iAβ6 may be a promising candidate for a lead compound of amyloidogenesis inhibitors. Copyright © 2013 European Peptide Society and John Wiley & Sons, Ltd.     

Protein stability and mutations in the axial methionine loop of a minimal cytochrome<Emphasis Type="Italic"> c</Emphasis>

The minimal mono-heme ferricytochrome c from Bacillus pasteurii, containing 71 amino acids, has been further investigated through mutagenesis of different positions in the loop containing the iron ligand Met71. These mutations have been designed to sample different aspects of the loop structure, in order to obtain insights into the determinants of the stability of the iron(III) environment. In particular, positions 68, 72 and 75 have been essayed. Gln68 has been mutated to Lys to provide a suitable alternate ligand that can displace Met71 under denaturing conditions. Pro72 has been mutated to Gly and Ala to modify the range of allowed backbone conformations. Ile75, which is in van der Waals contact with Met71 and partly shields a long-lived water molecule in a protein cavity, has been substituted by Val and Ala to affect the network of inter-residue interactions around the metal site. The different contributions of the above amino acids to protein parameters such as structure, redox potential and the overall stability against unfolding with guanidinium hydrochloride are analyzed. While the structure remains essentially the same, the stability decreases with mutations. The comparison with mitochondrial c-type cytochromes is instructive.Abbreviations Bpcytc soluble fragment of cytochrome c₅₅₃ from Bacillus pasteurii - GdmCl guanidinium chloride - I75A Ile75 to Ala mutant - I75V Ile75 to Val mutant - P72A Pro72 to Ala mutant - P72G Pro72 to Gly mutant - Q68K Gln75 to Lys mutant - WT wild type     

Evaluation of essential and variable residues of nukacin ISK-1 by NNK scanning

Nukacin ISK-1, a type-A(II) lantibiotic, comprises 27 amino acids with a distinct linear N-terminal and a globular C-terminal region. To identify the positional importance or redundancy of individual residues responsible for nukacin ISK-1 antimicrobial activity, we replaced the native codons of the parent peptide with NNK triplet oligonucleotides in order to generate a bank of nukacin ISK-1 variants. The bioactivity of each peptide variant was evaluated by colony overlay assay, and hence we identified three Lys residues (Lys1, Lys2 and Lys3) that provided electrostatic interactions with the target membrane and were significantly variable. The ring structure of nukacin ISK-1 was found to be crucially important as replacing the ring-forming residues caused a complete loss of bioactivity. In addition to the ring-forming residues, Gly5, His12, Asp13, Met16, Asn17 and Gln20 residues were found to be essential for antimicrobial activity; Val6, Ile7, Val10, Phe19, Phe21, Val22, Phe23 and Thr24 were relatively variable; and Ser4, Pro8, His15 and Ser27 were extensively variable relative to their positions. We obtained two variants, Asp13Glu and Val22Ile, which exhibited a twofold higher specific activity compared with the wild-type and are the first reported type-A(II) lantibiotic mutant peptides with increased potency.     

Epitope analysis of the multiphosphorylated peptide αs1‐casein(59–79)

The multiphosphorylated tryptic peptide α_s1‐casein(59–79) has been shown to be antigenic with anti‐casein antibodies. In an approach to determine the amino acyl residues critical for antibody binding we undertook an epitope analysis of the peptide using overlapping synthetic peptides. With α_s1‐casein(59–79) as the adsorbed antigen in a competitive ELISA only two of five overlapping synthetic peptides at 1 mM significantly inhibited binding of the anti‐casein antibodies. Peptides Glu‐Ser(P)‐Ile‐Ser(P)‐Ser(P)‐Ser(P)‐Glu‐Glu and Ile‐Val‐Pro‐Asn‐Ser(P)‐Val‐Glu‐Glu inhibited antibody binding by 20.0±3.6% and 60.3±7.9%, respectively. The epitope of Glu⁶³‐Ser(P)‐Ile‐Ser(P)‐Ser(P)‐Ser(P)‐Glu‐Glu⁷⁰ was further localised to the phosphoseryl cluster as the peptide Ser(P)‐Ser(P)‐Ser(P) significantly inhibited binding of the anti‐casein antibodies to α_s1‐casein(59–79) by 29.5±7.4%. Substitution of Ser(P)⁷⁵ with Ser⁷⁵ in the second inhibitory peptide Ile‐Val‐Pro‐Asn‐Ser(P)⁷⁵‐Val‐Glu‐Glu also abolished inhibition of antibody binding to α_s1‐casein (59–79) demonstrating that Ser(P)⁷⁵ is also a critical residue for recognition by the antibodies. These data show that the phosphorylated residues in the cluster sequence ‐Ser(P)⁶⁶‐Ser(P)‐Ser(P)⁶⁸ and in the sequence ‐Pro⁷³‐Asn‐Ser(P)‐Val‐Glu⁷⁷‐ are critical for antibody binding to α_s1‐casein(59–79) and further demonstrate that a highly phosphorylated segment of a protein can be antigenic. Copyright © 1999 European Peptide Society and John Wiley & Sons, Ltd.     

The primary structure of the β-subunit of protocatechuate 3,4-dioxygenase from Pseudomonas aeruginosa

The complete amino acid sequence of the β-subunit of protocatechuate 3,4-dioxygenase was determined. The β-subunit contained four methionine residues. Thus, five peptides were obtained after cleavage of the carboxymethylated β-subunit with cyanogen bromide, and were isolated on Sephadex G-75 column chromatography. The amino acid sequences of the cyanogen bromide peptides were established by characterization of the peptides obtained after digestion with trypsin, chymotrypsin, thermolysin, or Staphylococcus aureus protease. The major sequencing techniques used were automated and manual Edman degradations. The five cyanogen bromide peptides were aligned by means of the amino acid sequences of the peptides containing methionine purified from the tryptic hydrolysate of the carboxymethylated β-subunit. The amino acid sequence of all the 238 residues was as follows: ProAlaGlnAspAsnSerArgPheValIleArgAsp ArgAsnTrpHis ProLysAlaLeuThrPro-Asp — TyrLysThrSerIleAlaArg SerProArgGlnAla LeuValSerIleProGlnSer — IleSerGluThrThrGly ProAsnPheSerHisLeu GlyPheGlyAlaHisAsp-His — AspLeuLeuLeuAsnPheAsn AsnGlyGlyLeu ProIleGlyGluArgIle-Ile — ValAlaGlyArgValValAsp GlnTyrGlyLysPro ValProAsnThrLeuValGluMet — TrpGlnAlaAsnAla GlyGlyArgTyrArg HisLysAsnAspArgTyrLeuAlaPro — LeuAspProAsn PheGlyGlyValGly ArgCysLeuThrAspSerAspGlyTyrTyr — SerPheArg ThrIleLysProGlyPro TyrProTrpArgAsnGlyProAsnAsp — TrpArgProAla HisIleHisPheGlyIle SerGlyProSerIleAlaThr-Lys — LeuIleThrGlnLeuTyr PheGluGlyAspPro LeuIleProMetCysProIleVal — LysSerIleAlaAsn ProGluAlaValGlnGln LeuIleAlaLysLeuAspMetAsnAsn — AlaAsnProMet AsnCysLeuAlaTyr ArgPheAspIleValLeuArgGlyGlnArgLysThrHis PheGluAsnCys. The sequence published earlier in summary form (Iwaki et al., 1979, J. Biochem.86, 1159–1162) contained a few errors which are pointed out in this paper.     

Amino acids Glu323, Tyr324, Glu330, and Val331 of factor Va heavy chain are essential for expression of cofactor activity

We have recently demonstrated that amino acid region 323-331 of factor Va heavy chain (9 amino acids, AP4') contains a binding site for factor Xa (Kalafatis, M., and Beck, D. O. (2002) Biochemistry 41, 12715-12728). To ascertain which amino acids within this region are important for the effector and receptor properties of the cofactor with respect to factor Xa, we have synthesized three overlapping peptides (5 amino acids each) spanning the amino acid region 323-331 and tested them for their effect on prothrombinase complex assembly and function. Peptide containing amino acids 323EYFIA327 alone was found to increase the catalytic efficiency of factor Xa but had no effect on the fluorescent anisotropy of active site-labeled factor Xa (human factor Xa labeled in the active site with Oregon Green 488; [OG488]-EGR-hXa). In contrast, peptide containing the sequence 327AAEEV331 was found to interact with [OG488]-EGR-hXa with half-maximal saturation reached at approximately 150 microm, but it was unable to produce a cofactor effect on factor Xa. Peptide 325FIAAE329 inhibited prothrombinase activity and was able to partially decrease the fluorescent anisotropy of [OG488]-EGR-hXa but could not increase the catalytic efficiency of factor Xa with respect to prothrombin. A control peptide with the sequence FFFIA did not increase the catalytic efficiency of factor Xa, whereas a peptide with the sequence AAEMI was impaired in its capability to interact with [OG488]-EGR-hXa. Two mutant recombinant factor Va molecules (Glu323 --> Phe/Tyr324 --> Phe, factor VaFF; Glu330 --> Met/Val331 --> Ile, factor VaMI) showed impaired cofactor activity when used at limiting cofactor concentration, whereas the quadruple mutant (Glu323 --> Phe/Tyr324 --> Phe and Glu330 --> Met/Val331 --> Ile, factor VaFF/MI) had no cofactor activity under similar experimental conditions. Our data demonstrate that amino acid residues Glu323, Tyr324, Glu330, and Val331 of factor Va heavy chain are critical for expression of factor Va cofactor activity.     

Identification,characterization and functional expression of a tyrosine ammonia-lyase and its mutants from the photosynthetic bacterium <Emphasis Type="Italic">Rhodobacter sphaeroides</Emphasis>

A tyrosine ammonia-lyase (TAL) enzyme from the photosynthetic bacterium Rhodobacter sphaeroides (RsTAL) was identified, cloned and functionally expressed in Escherichia coli, where conversion of tyrosine to p-hydroxycinnamic acid (pHCA) was demonstrated. The RsTAL enzyme is implicated in production of pHCA, which serves as the cofactor for synthesis of the photoactive yellow protein (PYP) in photosynthetic bacteria. The wild type RsTAL enzyme, while accepting both tyrosine and phenylalanine as substrate, prefers tyrosine, but a serendipitous RsTAL mutant identified during PCR amplification of the RsTAL gene, demonstrates much higher preference for phenylalanine as substrate and deaminates it to produces cinnamic acid. Sequence analysis showed the presence of three mutations: Met4 → Ile, Ile325 → Val and Val409 → Met in this mutant. Sequence comparison with Rhodobacter capsulatus TAL (RcTAL) shows that Val409 is conserved between RcTAL and RsTAL. Two single mutants of RsTAL, Val409 → Met and Val 409 → Ile, generated by site-directed mutagenesis, demonstrate greater preference for phenylalanine compared to the wild type enzyme. Our studies illustrate that relatively minor changes in the primary structure of an ammonia-lyase enzyme can significantly affect its substrate specificity.     

Investigation of α/γ hybrid peptide self‐assembled structures with antimicrobial and antibiofilm properties

The present work describes the synthesis and characterization of α/γ hybrid peptides, Boc‐Phe‐γ⁴‐Phe‐Val‐OMe, P1 ; Boc‐Ala‐γ⁴‐Phe‐Val‐OMe, P2 ; and Boc‐Leu‐γ⁴‐Phe‐Val‐OMe, P3 together with the formation of self‐assembled structures formed by these hybrid peptides in dimethyl sulfoxide (DMSO)/water (1:1). The self‐assembled structures were characterized by infrared (IR) spectroscopy, circular dichroism (CD), and scanning electron microscopy (SEM). Further, α/γ hybrid peptide self‐assembled structures were evaluated for antibacterial properties. Among all, the self‐assembled peptide P1 exhibited the antimicrobial activity against Escherichia coli and Klebsiella pneumoniae, while self‐assembled peptide P3 inhibited the biofilms of Salmonella typhimurium and Pseudomonas aeruginosa. In this study, we have shown the significance of self‐assembled structures formed from completely hydrophobic α/γ hybrid peptides in exploring the antibacterial properties together with biofilm inhibition.     

Modulating the structure of phenylalanine‐incorporated ascidiacyclamide through fluorination

We designed four fluorinated Phe‐incorporated ascidiacyclamide ([Phe]ASC) analogs, (cyclo(?Xxx1‐oxazoline2‐d ‐Val3‐thiazole4‐Ile5‐oxazoline6‐d ‐Val7‐thiazole8‐)), [(4‐F)Phe]ASC (Xxx1: 4‐fluorophenylalanine), [(3,5‐F₂)Phe]ASC (Xxx1: 3,5‐difluorophenylalanine), [(3,4,5‐F₃)Phe]ASC (Xxx1: 3,4,5‐trifluorophenylalanine) and [(F₅)Phe]ASC (Xxx1: pentafluorophenylalanine), to modulate the π‐electron density of the aromatic ring of the Phe residue. X‐ray diffraction analysis, ¹H NMR and CD spectra all suggested that the interactions between the benzene ring of the Xxx1 residue and the alkyl groups of oxazoline2 contribute to the stability of the folded structure of these analogs. Substituting fluorines for the hydrogens progressively weakened those interactions through reducing the π‐electron density, thereby mediating transformation from the folded to square structure. As a result, [(F₅)Phe]ASC preferred the square form more than the other analogs did. Also contributing to the preference for the square form may be the hindrance of the rotation around the Cα–Cβ bond by the two ortho‐fluoro substituents of [(F₅)Phe]ASC. These findings demonstrate that the structure of ASC can be modulated by using fluorine as an electron‐withdrawing group. Copyright © 2014 European Peptide Society and John Wiley & Sons, Ltd.