Characteristics of thermostable pullulanase from Bacillus stearothermophilus and the nucleotide sequence of the gene

Thermostable pullulanase was purified to homogeneity on sodium dodecyl sulfate-polyacrylamide gel from the culture supernatant of Bacillus stearothermophilus TRS128. However, multiformity of the pullulanase was suggested by activity staining on a pullulan-reactive red plate. The thermostability of the enzyme was tested. In the presence of Ca²⁺, the optimum temperature of the pullulanase was 75°C, and nearly 100% of the enzyme activity was retained even after treatment at 68°C for 60 min. Since the thermostable pullulanase gene (pulT) has been cloned, the nucleotide sequence was determined. Although the DNA sequence revealed only one large open reading frame, two possible pairs of SD sequence and initiation codon were found in the frame. To analyze the regulatory region, several mutations (deletion, insertion and substitution of nucleotides) were introduced in the flanking region of pulT, using site-directed mutagenesis. A putative promoter, SD sequence and initiation codon were inferred. The pulT gene was composed of 1974 bases and 658 amino acid residues (molecular weight 75,375). The deduced amino acid sequence of the thermostable pullulanase exhibited a fairly low homology with that of the thermolabile pullulanase from Klebsiella aerogenes. However, four consensus sequences containing catalytic and/or substrate binding sites for amylolytic enzymes were also found in the thermostable pullulanase and the thermolabile enzyme.     

Covalent immobilization of pullulanase on alginate and study of its hydrolysis of pullulan

The immobilization of pullulanase from Klebsiella pneumoniae by grafting was investigated. Pullulanase was linked after activation of alginate via a covalent bond between the amine groups of the enzyme and the carboxylic acid groups of alginate. The immobilization yield was 60%. The activity of free pullulanase and immobilized pullulanase was followed by the quantification of reducing ends by colorimetric assay and the determination of the molar masses of the hydrolyzed pullulan by SEC/MALS/DRI. Compared to free pullulanase, the kinetics is largely slowed. The evolution of the weight average molar mass of pullulan leading to high production of shorter oligosaccharides during hydrolysis is not the same as that obtained with free enzyme. Immobilized pullulanase retained 75% and 30% of its initial activity after 24 h and 14 days of incubation at 60°C, respectively while free pullulanase lost its activity after 5 h of hydrolysis at the same temperature. The kinetic parameters of immobilized pullulanase were also investigated by isothermal titration calorimetry (ITC). The affinity of immobilized enzyme to its substrate was reduced compared to the free pullulanase due to steric hindrance and chemical links. © 2015 American Institute of Chemical Engineers Biotechnol. Prog., 31:883–889, 2015     

Co-immobilization of amyloglucosidase and pullulanase for enhanced starch hydrolysis

Summary Amyloglucosidase and pullulanase were co-immobilized using a hydrophilic polyurethane foam (Hypol^® 2002). The combined amyloglucosidase and pullulanase activity of the immobilized enzyme was 32.2% ± 1.7% relative to the non-immobilized enzyme. The co-immobilized enzymes were capable of using a variety of glycogen and starch substrates. Co-immobilization of amyloglucosidase and pullulanase increased the glucose yield 1.6-fold over immobilized amyloglucosidase alone. No decrease in activity was observed after 4 months storage for the co-immobilized enzymes. The results suggest that co-immobilization of amyloglucosidase and pullulanase in polyurethane foams is a potentially useful approach for commercial starch hydrolysis. Offprint requests to: K. B. Storey     

Pullulanase from rice endosperm

Pullulanase (EC 3.2.1.41) in non-germinating seeds was compared with that in germinating seeds. Moreover, pullulanase from the endosperm of rice (Oryza sativa L., cv. Hinohikari) seeds was isolated and its properties investigated. The pI value of pullulanase from seeds after 8 days of germination was almost equal to that from non-germinating seeds, which shows that these two enzymes are the same protein. Therefore, the same pullulanase may play roles in both starch synthesis during ripening and starch degradation during germination in rice seeds. The enzyme was isolated by a procedure that included ammonium sulfate fractionation, DEAE-cellulofine column chromatography, preparative isoelectric focusing, and preparative disc gel electrophoresis. The enzyme was homogeneous by SDS/PAGE. The molecular weight of the enzyme was estimated to be 100 000 based on its mobility on SDS/PAGE and 105 000 based on gel filtration with TSKgel super SW 3000, which showed that it was composed of a single unit. The isoelectric point of the enzyme was 4.7. The enzyme was strongly inhibited by beta-cyclodextrin. The enzyme was not activated by thiol reagents such as dithiothreitol, 2-mercaptoethanol or glutathione. The enzyme most preferably hydrolyzed pullulan and liberated only maltotriose. The pullulan hydrolysis was strongly inhibited by the substrate at a concentration higher than 0.1%. The degree of inhibition increased with an increase in the concentration of pullulan. However, the enzyme hydrolyzed amylopectin, soluble starch and beta-limit dextrin more rapidly as their concentrations increased. The enzyme exhibited alpha-glucosyltransfer activity and produced an alpha-1,6-linked compound of two maltotriose molecules from pullulan.     

嗜热枯草芽孢杆菌普鲁兰酶基因的表达与重组酶的性质

克隆嗜热枯草芽孢杆菌WY-34普鲁兰酶基因并在大肠杆菌中进行表达,对重组酶进行纯化和酶学性质研究,根据枯草芽孢杆菌的普鲁兰酶蛋白序列,设计PCR引物对WY-34的普鲁兰酶基因进行克隆及异源表达.对表达蛋白的最适pH、pH稳定性及最适温度、温度稳定性等特性进行研究,并测定重组普鲁兰酶的底物特异性.将普鲁兰酶基因pluA克隆及分析序列后,发现基因长度为2.2 kb,编码718个氨基酸,在大肠杆菌中异源表达.通过Ni-IDA亲和层析一步纯化得到比活力为93.2 U/mg的纯酶,SDS-PAGE和凝胶层析测定的分子量分别为76.2 kD和74.3 kD.酶学性质研究表明,该酶的最适温度为40℃,在温度不高于45℃条件下稳定;最适pH为6.0,同一温度下pH 6.0-9.0范围内处理30 min可以保持80％以上的酶活力,此酶对普鲁兰糖有很强的底物特异性.此重组普鲁兰酶的酶学性质表明此酶具有一定的工业化应用价值.     

Physiological and enzymatic characterization of a novel pullulan-degrading thermophilic Bacillus strain 3183

Summary A new thermophilic Bacillus strain 3183 (ATCC 49341) was isolated from hot-spring sediments. The organism grew on pullulan as a carbon source and showed optimum pH and temperature at pH 5.5 and 62° C, respectively, for growth. The strain reduced nitrate to nitrite both aerobically and anaerobically. It produced extracellular thermostable pullulanase and saccharidase activities which degraded pullulan and starch into maltotriose, maltose, and glucose. Medium growth conditions for pullulanase production were optimized. The optimum pH and temperature for pullulanase activity were at pH 6.0 and 75° C, respectively. The enzyme was stable at pH 5.5-7.0 and temperature up to 70° C in the absence of substrate. The K _m for pullulan at pH 6.0 and 75° C was 0.4 mg/ml. The pullulanase activity was stimulated and stabilized by Ca²⁺. It was inhibited by ethylenediaminetetraacetate (EDTA), beta and gamma-cyclodextrins but not by alpha-cyclodextrin and reagents that inhibit essential enzyme SH-groups. Offprint requests to: B. C. Saha     

一个新型耐热普鲁兰酶的结构与功能

新型普鲁兰酶的研究对于普鲁兰酶制剂的国产化、打破国外垄断具有非常重要的意义。从我国云南腾冲地区轮马热泉的淤泥中分离获得了一株耐热普鲁兰酶产生菌LM 18-11,经16S rDNA序列系统进化树分析,确定该菌为厌氧芽胞杆菌Anoxybacillus属种,并从中克隆获得了耐热普鲁兰酶的编码基因,该酶在55℃-60℃、pH 5.6-6.4的范围内具有最大的反应活性。此外,该酶具有较好的热稳定性,在60℃下处理48 h,仍可保持50%以上的活力;动力学分析该酶的Vmax和Km分别为750 U/mg和1.47 mg/mL,是目前文献报道中比活力最高的耐热普鲁兰酶。同时还对该酶进行了晶体结构分析,结果显示该酶具有?-淀粉酶家族中典型的结构,在N端具有一个特殊的底物结合域,该结构域的缺失导致比活力和底物结合力都有相应降低,Vmax和Km分别为324 U/mg和1.95 mg/mL。同时,将该普鲁兰酶编码基因导入枯草芽胞杆菌中,在P43启动子的控制下,普鲁兰酶基因获得了高效表达,胞外酶活可达42 U/mL,相比初始菌种,表达活力提高40倍以上。研究表明该普鲁兰酶具有很好的应用前景。     

Purification of pullulanase from <Emphasis Type="Italic">Aureobasidium pullulan</Emphasis>s

Purification and characterization of pullulanase from Aureobasidium pullulans. Pullulanase was purified by using gel—filtration column then on ion exchange using Q-sepharose column yielding a single peak. Purification was further carried out on SP-sepharose column. Molecular weight of pullulanase from A. pullulans was found to be about 73 KDa on the SDS-PAGE 10%. Native-PAGE 10% showed the activity of pullulanase, using polyacrylamide gel containing pullulan. Hydrolysis products from pullulanase activity with soluble starch, glycogen and pullulan on thin layer chromatography appeared as one band which is maltotriose, while α-amylase with soluble starch and glycogen showed two bands which are maltose and maltotriose but α-amylase gave negative result with pullulan on TLC chromatography only. Pullulanase could degrade α-1,6 glycosidic linkage of the previous substrates, while amylase could degrade α-1,4 glycosidic linkage of glycogen, soluble starch and pullulan. MALDI-Ms was employed to deduce protein sequence of pullulanase.     

Cloning, sequencing, and characterization of a heat- and alkali-stable type I pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70 degrees C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg'). The N-terminal sequence of purified rPulAg' was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg' were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, beta-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg' was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Molecular cloning and biochemical characterization of a heat-stable type I pullulanase from Thermotoga neapolitana

The gene encoding a type I pullulanase from the hyperthermophilic anaerobic bacterium Thermotoga neapolitana (pulA) was cloned in Escherichia coli and sequenced. The pulA gene from T. neapolitana showed 91.5% pairwise amino acid identity with pulA from Thermotoga maritima and contained the four regions conserved in all amylolytic enzymes. pulA encodes a protein of 843 amino acids with a 19-residue signal peptide. The pulA gene was subcloned and overexpressed in E. coli under the control of the T7 promoter. The purified recombinant enzyme (rPulA) produced a 93-kDa protein with pullulanase activity. rPulA was optimally active at pH 5-7 and 80°C and had a half-life of 88 min at 80°C. rPulA hydrolyzed pullulan, producing maltotriose, and hydrolytic activities were also detected with amylopectin, starch, and glycogen, but not with amylose. This substrate specificity is typical of a type I pullulanase. Thin layer chromatography of the reaction products in the reaction with pullulan and aesculin showed that the enzyme had transglycosylation activity. Analysis of the transfer product using NMR and isoamylase treatment revealed it to be α-maltotriosyl-(1,6)-aesculin, suggesting that the enzyme transferred the maltotriosyl residue of pullulan to aesculin by forming α-1,6-glucosidic linkages. Our findings suggest that the pullulanase from T. neapolitana is the first thermostable type I pullulanase which has α-1,6-transferring activity.     

Antiamylase-pullulanase enzyme monoclonals which specifically inhibit amylase or pullulanase activity

Monoclonal antibodies against amylase-pullulanase enzyme from Bacillus circulans F-2 have been produced to locate and characterize the catalytic sites of the enzyme. The antibodies have been examined for inhibition of both enzyme activities of amylase and pullulanase and then classified into four types: Type I which inhibited amylase activity, Type II which inhibited pullulanase activity, Type III which inhibited both enzyme activities, and Type IV which had no effect on either enzyme activity. Only two monoclonal antibodies (MAP-12 and MAP-17) as Type I and two antibodies (MAP-3 and MAP-5) as Type II were isolated. The inhibitory activities of the antibodies were characterized and compared. In Type II antibodies, the maximal demonstrated inhibition on the pullulanase activity was 88% for MAP-3 with 1 microg of antibody and 90% for MAP-5 with 2 microg of antibody, but did not inhibit the amylase activity. In Type I antibodies, in contrast, the maximal demonstrated inhibition on the amylase activity was 94% for MAP-12 and 97% for MAP-17 with 1 microg of antibody, respectively, but no inhibition of the pullulanase was noted. MAP-12 recognized sequential epitope, while MAP-17 recognized conformation-dependent epitope of amylase activity-related regions. However, both MAP-3 and MAP-5 recognized the conformation-dependent epitope of the pullulanase activity-related region. Furthermore, the antibodies of MAP-3, MAP-5, MAP-12, and MAP-17 did not compete with one another for binding to the enzyme, indicating that they have different target epitopes on the enzyme. Antibody binding of MAP-12 and MAP-17 to the enzyme was not specifically affected by any of the antiamylase compounds tested: (a) nojirimycin; and (b) 1-deoxynojirimycin. Kinetic analysis of their effects provides evidence that both antibodies of MAP-12 and MAP-17 decrease the catalytic rate of enzyme activity and have little or no effect on substrate binding.     

Purification,Crystallization and Some Properties of Intracellular Pullulanase from Aerobacter aerogenes

Intracellular pullulanase was entirely extracted with sodium dodecylsulfate from the cells and was purified by means of ammonium sulfate fractionation and DEAE-cellulose and Sephadex chromatography. Crystalline pullulanase was precipitated with saturated ammonium sulfate solution. Intracellular pullulanase was purified over 150 fold in 17% yield to a final specific activity of 7000 per mg protein from the enzyme solution obtained by SDS-extraction. On ultracentrifugation analysis, the enzyme showed a symmetrical peak. The sedimentation coefficient, s_{20, w} was 6.29 S. Polyacrylamide disc electrophoresis gave a main band and a sub-band, and both showed activity. Molecular weight of intracellular pullulanase was estimated to be (8±1) × 10,000 from gel filtration with Sephadex G-200 and to be (9±1) × 10,000 from sedimentation equilibrium. These values were higher than that (6~7 × 10,000) of extracellular pullulanase. Both enzymes differed slightly in thermal- and pH-stabilities.     

Cloning, Sequencing, and Characterization of a Heat- and Alkali-Stable Type I Pullulanase from Anaerobranca gottschalkii

The gene encoding a type I pullulanase was identified from the genome sequence of the anaerobic thermoalkaliphilic bacterium Anaerobranca gottschalkii. In addition, the homologous gene was isolated from a gene library of Anaerobranca horikoshii and sequenced. The proteins encoded by these two genes showed 39% amino acid sequence identity to the pullulanases from the thermophilic anaerobic bacteria Fervidobacterium pennivorans and Thermotoga maritima. The pullulanase gene from A. gottschalkii (encoding 865 amino acids with a predicted molecular mass of 98 kDa) was cloned and expressed in Escherichia coli strain BL21(DE3) so that the protein did not have the signal peptide. Accordingly, the molecular mass of the purified recombinant pullulanase (rPulAg) was 96 kDa. Pullulan hydrolysis activity was optimal at pH 8.0 and 70°C, and under these physicochemical conditions the half-life of rPulAg was 22 h. By using an alternative expression strategy in E. coli Tuner(DE3)(pLysS), the pullulanase gene from A. gottschalkii, including its signal peptide-encoding sequence, was cloned. In this case, the purified recombinant enzyme was a truncated 70-kDa form (rPulAg′). The N-terminal sequence of purified rPulAg′ was found 252 amino acids downstream from the start site, presumably indicating that there was alternative translation initiation or N-terminal protease cleavage by E. coli. Interestingly, most of the physicochemical properties of rPulAg′ were identical to those of rPulAg. Both enzymes degraded pullulan via an endo-type mechanism, yielding maltotriose as the final product, and hydrolytic activity was also detected with amylopectin, starch, β-limited dextrins, and glycogen but not with amylose. This substrate specificity is typical of type I pullulanases. rPulAg was inhibited by cyclodextrins, whereas addition of mono- or bivalent cations did not have a stimulating effect. In addition, rPulAg′ was stable in the presence of 0.5% sodium dodecyl sulfate, 20% Tween, and 50% Triton X-100. The pullulanase from A. gottschalkii is the first thermoalkalistable type I pullulanase that has been described.     

Improved purification and biochemical characterization of extracellular amylopullulanase from Thermoanaerobacter ethanolicus 39E

A maltose-limited chemostat culture was used to investigate the expression and excretion of amylopullulanase by Thermoanaerobacter ethanolicus 39E (formerly Clostridium thermohydrosulfuricum 39E). In maltose-limited continuous culture, amylopullulanase was produced and secreted at tenfold higher levels than in batch culture. The extracellular amylopullulanase was purified to homonogeneity by using an inhibitor-linked affinity column matrix. The purified amylopullulanase had a specific activity of 480 units (U)/mg protein for pullulanase and 175 U/mg protein for -amylase. -Cyclodextrin inhibited both -amylase and pullulanase activities, with a substrate inhibition constant (K _i) of 0.065 mg/ml.Amylopullulanase had a relative molecular mass (M_r) of 140 000 using sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS-PAGE) analysis and an M_r of 133 000 using gel-filtration chromatography. The N-terminal sequence of the enzyme was Glu-Thr-Asp-Thr-Ala-Pro-Ala. The purified enzyme displayed Michaelis constant (K _m) values of 0.35 mg/ml for pullulan and 1.00 mg/ml for amylose. The enzyme had an isoelectric point (pI) of 4.0, and displayed an optimum pH for stability and activity of 6.2 and 5.5, respectively. The enzyme was stable up to 85° C in the presence of Ca²⁺, and had a half-life of 40 min at 90° C (pH 6.2). Ca²⁺ was required for thermal stability, but not for activity. Amylose, glycogen, and amylopectin were degrade to maltose, maltotriose, and maltotetraose, whereas only maltotriose was formed from pullulan. Correspondence to: J. G. Zeikus     

Preparation of an immobilized two-enzyme system, beta-amylase-pullulanase, to an acrylic copolymer for the conversion of starch to maltose. II. Cocoupling of the enzymes and use in a packed bed column

β-Amylase (EC 3.2.1.2) and pullulanase (EC 3.2.1.9) have been covalently bound in a two-enzyme system to a crosslinked copolymer of acrylarmide-acrylic acid by using a water-soluble carbodiimide. The coupling yields based on the amounts of added β-amylase and pullulanase were 40% and 38%, respectively, with residual enzymic activities of 22% and 32% of those of free enzymes. A markedly increased operational stability was observed for the immobilized two-enzyme system compared to the free enzymes in solution. In order to find optimal operational conditions the influence of different pH values and temperatures on the conversion process was investigated. The action of the immobilized β-amylase-pullulanase derivative on partially hydrolyzed starch (DE 3.4–10.7) in a packed bed column was studied. Analysis of the product was performed using gas-liquid chromatography.     

Cloning and expression of the gene for thermostable pullulanase from Clostridium thermohydrosulfuricum in Escherichia coli

Using a pUC19-based genomic library of the anaerobic thermophilic bacterium C. thermohydrosulfuricum a DNA fragment that confers pullulanase activity to E. coli cells has been identified. Subcloning and restriction mapping procedures was carried out and the primary structure of the 5'-region of the pullulanase gene (pul) was determined. The pul enzyme was shown to be a protein with molecular weight of approximately 60,000. It was found that both pullulanase and glucoamylase activities resides in pullulanase. The intracellular distribution of pullulanase was studied. An E. coli strain that produces large amounts of thermostable pullulanase has been constructed.     

Purification and characterization of the extracellular alpha-amylase from Streptococcus bovis JB1.

The extracellular alpha-amylase (1,4-alpha-D-glucanglucanohydrolase; EC 3.2.1.1) from maltose-grown Streptococcus bovis JB1 was purified to apparent homogeneity by ion-exchange chromatography (Mono Q). The enzyme had an isoelectric point of 4.50 and an apparent molecular mass of 77,000 Da, as estimated by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The enzyme was rich in acidic and hydrophobic amino acids. The 15-amino-acid NH2-terminal sequence was 40% homologous with the Bacillus subtilis saccharifying alpha-amylase and 27% homologous with the Clostridium acetobutylicum alpha-amylase. alpha-Amylase activity on soluble starch was optimal at pH 5.0 to 6.0. The enzyme was relatively stable between pH 5.5 and 8.5 and at temperatures below 50 degrees C. When soluble potato starch was used as the substrate, the enzyme had a Km of 0.88 mg.ml-1 and a kcat of 2,510 mumol of reducing sugar.min-1.mg of protein-1. The enzyme exhibited neither pullulanase nor dextranase activity and was 40 to 70% as active on amylopectin as on amylose. The major end products of amylose hydrolysis were maltose, maltotriose, and maltotetraose.     

Purification and characterization of a cold-adapted pullulanase from a psychrophilic bacterial isolate

There is a considerable potential of cold-active biocatalysts for versatile industrial applications. A psychrophilic bacterial strain, Shewanella arctica 40-3, has been isolated from arctic sea ice and was shown to exhibit pullulan-degrading activity. Purification of a monomeric, 150-kDa pullulanase was achieved using a five-step purification approach. The native enzyme was purified 50.0-fold to a final specific activity of 3.0 U/mg. The enzyme was active at a broad range of temperature (10–50 °C) and pH (5–9). Optimal activity was determined at 45 °C and pH 7. The presence of various metal ions is tolerated by the pullulanase, while detergents resulted in decreased activity. Complete conversion of pullulan to maltotriose as the sole product and N-terminal amino acid sequence indicated that the enzyme is a type-I pullulanase and belongs to rarely characterized pullulan-degrading enzymes from psychrophiles.     

Magnetite-alginate beads for purification of some starch degrading enzymes

Starch degrading enzymes, viz., β-amylase, glucoamylase, and pullulanase, were purified using magnetite-alginate beads. In each case, the enzyme activity was eluted by using 1.0 M maltose. β-Amylase (sweet potato), glucoamylase (Aspergillus niger), and pullulanase (Bacillus acidopullulyticus) from their crude preparations were purified 37-, 31-, and 49-fold with 86, 87, and 95% activity recovery, respectively. Sodium dodecyl sulfate-polyacrylamide gel electrophoresis analysis showed single band in each case.     

Heterologous expression,secretion and characterization of the <Emphasis Type="Italic">Geobacillus thermoleovorans</Emphasis> US105 type I pullulanase

Pullulanase type I of Geobacillus thermoleovorans US105 strain (PUL US105) was produced and secreted efficiently in the E. coli periplasmic or extracellular fraction using two different signal peptides. Hence, the open reading frame was connected downstream of the lipase A signal peptide of Bacillus subtilis strain leading to an efficient secretion of an active form enzyme on the periplasmic fraction. In addition, pul US105 was fused to the α-amylase signal sequence of the Bacillus stearothermophilus US100 strain. The monitoring of the pullulanase activity and Western blot analysis for this last construction showed that the most activity was found in the supernatant culture, proving the efficient secretion of this natively cytoplasmic enzyme as an active form. The PUL US105 was purified to homogeneity from the periplasmic fraction, using heat treatment, size exclusion, and anion-exchange chromatography. The native pullulanase has a molecular mass of 160 kDa and is composed of two identical subunits of 80 kDa each. It was independent for metallic ions for its activity, while its thermostability was obviously improved in presence of only 0.1 mM CaCl₂.