Effects of water-miscible solvents and polyhydroxy compounds on the structure and enzymatic activity of thermolysin

The effect of organic solvents (n-propanol, isopropanol, dimethylformamide and dimethylsulfoxide) on the structure, activity and stability of thermolysin was the focus of this investigation. Results show the ability of the solvents to cause mixed inhibition of thermolysin, which was indicated by kinetic and structural studies (near-UV CD spectra and intrinsic fluorescence). Inhibitory effect of the solvents increased with increments in solvents logP. Thermoinactivation of thermolysin was studied at 80 degrees C in 50% of solvents and showed that with the increase in solvent hydrophobicity, thermal stability of the enzyme decreased. For the stabilization of thermolysin at high temperature, additives such as glycerol, sorbitol and trehalose were employed. In the presence of DMF with a relatively low logP, trehalose was shown to be a good stabilizer, whereas glycerol had a marked stabilization effect in the presence of n-propanol and isopropanol with a relatively high logP. Consequently, it was concluded that the stabilizing effect of additives can be correlated with the logP of solvents.     

溶剂稳定性蛋白酶产生菌的筛选和鉴定

自油污土样等样品中分离获得一株具有产胞外溶剂稳定性蛋白酶的耐有机溶剂极端微生物,经BIOLOG系统鉴定及16S rDNA序列(GenBank,EF105377)分析,该菌株为Bacillus licheniformis YP1。该菌株能耐受中浓度盐、强碱性环境(pH12)及多种不同浓度的有机溶剂,但对多种抗生素敏感。在YP1产蛋白酶发酵过程中添加各种有机溶剂结果表明,丙酮虽抑制了菌体生物量的生长却促进了单位菌体的蛋白酶分泌,而长链烷醇如辛醇、十二醇等能强烈抑制该蛋白酶的分泌。该菌株所产蛋白酶经11种50%(V/V)有机溶剂处理后均能保留高活力。该溶剂稳定性蛋白酶在有机相生物催化等领域具有良好的应用前景。     

Biotransformation in double-phase systems: physiological responses of Pseudomonas putida DOT-T1E to a double phase made of aliphatic alcohols and biosynthesis of substituted catechols

Pseudomonas putida strain DOT-T1E is highly tolerant to organic solvents, with a logP(ow) (the logarithm of the partition coefficient of a solvent in a two-phase water-octanol system of > or =2.5. Solvent tolerant microorganisms can be exploited to develop double-phase (organic solvent and water) biotransformation systems in which toxic substrates or products are kept in the organic phase. We tested P. putida DOT-T1E tolerance to different aliphatic alcohols with a logP(ow) value between 2 and 4, such as decanol, nonanol, and octanol, which are potentially useful in biotransformations in double-phase systems in which compounds with a logP(ow) around 1.5 are produced. P. putida DOT-T1E responds to aliphatic alcohols as the second phase through cis-to-trans isomerization of unsaturated cis fatty acids and through efflux of these aliphatic alcohols via a series of pumps that also extrude aromatic hydrocarbons. These defense mechanisms allow P. putida DOT-T1E to survive well in the presence of high concentrations of the aliphatic alcohols, and growth with nonanol or decanol occurred at a high rate, whereas in the presence of an octanol double-phase growth was compromised. Our results support that the logP(ow) of aliphatic alcohols correlates with their toxic effects, as octanol (logP(ow) = 2.9) has more negative effects in P. putida cells than 1-nonanol (logP(ow) = 3.4) or 1-decanol (logP(ow) = 4). A P. putida DOT-T1E derivative bearing plasmid pWW0-xylE::Km transforms m-xylene (logP(ow) = 3.2) into 3-methylcatechol (logP(ow) = 1.8). The amount of 3-methylcatechol produced in an aliphatic alcohol/water bioreactor was 10- to 20-fold higher than in an aqueous medium, demonstrating the usefulness of double-phase systems for this particular biotransformation.     

Catechol production by O-demethylation of 2-methoxyphenol using the obligate anaerobe, Acetobacterium woodii

Acetobacterium woodii produced catechol (up to 7.84 mM) by demethylating 2-methoxyphenol during growth in the presence or absence of fructose. The highest product concentrations were obtained when 2-methoxyphenol was the sole energy source but the highest substrate conversion (97%) was obtained in fructose-limited chemostat culture. Growing cells were the most suitable form of the biocatalyst since the catalytic activity was 5-fold higher than in harvested cells.     

Prediction of penicillin V acylase stability in water-organic co-solvent monophasic systems as a function of solvent composition

Hydrolytic activity of penicillin V acylase (EC 3.5.1.11) can be improved by using organic cosolvents in monophasic systems. However, the addition of these solvents may result in loss of stability of the enzyme. The thermal stability of penicillin V acylase from Streptomyces lavendulae in water-organic cosolvent monophasic systems depends on the nature of the organic solvent and its concentration in the media. The threshold solvent concentration (at which half enzymatic activity is displayed) is related to the denaturing capacity of the solvent. We found out linear correlations between the free energy of denaturation at 40 degrees C and the concentration of the solvent in the media. On one hand, those solvents with logP values lower than -1.8 have a protective effect that is enhanced when its concentration is increased in the medium. On the other hand, those solvents with logP values higher than -1.8 have a denaturing effect: the higher this value and concentration, the more deleterious. Deactivation constants of PVA at 40 degrees C can be predicted in any monophasic system containing a water-miscible solvent.     

Enhanced biotransformation of carbon tetrachloride by Acetobacterium woodii upon addition of hydroxocobalamin and fructose.

The objective of this study was to evaluate the effect of hydroxocobalamin (OH-Cbl) on transformation of high concentrations of carbon tetrachloride (CT) by Acetobacterium woodii (ATCC 29683). Complete transformation of 470 microM (72 mg/liter [aqueous]) CT was achieved by A. woodii within 2.5 days, when 10 microM OH-Cbl was added along with 25.2 mM fructose. This was approximately 30 times faster than A. woodii cultures (live or autoclaved) and medium that did not receive OH-Cbl and 5 times faster than those controls that did receive OH-Cbl, but either live A. woodii or fructose was missing. CT transformation in treatments with only OH-Cbl was indicative of the important contribution of nonenzymatic reactions. Besides increasing the rate of CT transformation, addition of fructose and OH-Cbl to live cultures increased the percentage of [(14)C]CT transformed to (14)CO(2) (up to 31%) and (14)C-labeled soluble materials (principally L-lactate and acetate), while decreasing the percentage of CT reduced to chloroform and abiotically transformed to carbon disulfide. (14)CS(2) represented more than 35% of the [(14)C]CT in the presence of reduced medium and OH-Cbl. Conversion of CT to CO was a predominant pathway in formation of CO(2) in the presence of live cells and added fructose and OH-Cbl. These results indicate that the rate and distribution of products during cometabolic transformation of CT by A. woodii can be improved by the addition of fructose and OH-Cbl.     

Toxicity of homologous series of organic solvents for the gram-positive bacteria Arthrobacter and Nocardia Sp. and the gram-negative bacteria Acinetobacter and Pseudomonas Sp

The toxicity of homologous series of organic solvents has been investigated for the gram-positive bacteria, Arthrobacter sp. and Nocardia sp., and the gram-negative bacteria, Acinetobacter sp. and Pseudomonas sp. The hydrophobicity of the solvent, expressed by its logP(octanol), proves to be a good measure for the toxicity of solvents in a two-phase system. The transition from toxic to nontoxic solvents occurs between logP(octanol) 3 and 5 and depends on the homologous series. No correlation has been found between the hydrophobicity of the substituent on the alkyl backbone of the solvent and the location of the transition point in toxicity. The logP(octanol), above which all solvents are nontoxic, is used to express the solvent tolerance of the bacteria. In general, the solvent tolerance of gram-negative bacteria is found to be slightly higher than that of gram-positive bacteria, but this does not hold for all homologous series of organic solvents investigated.Because the toxicity effects of organic solvents in a two-phase system can be ascribed to molecular as well as phase toxicity effects, molecular toxicity effects were investigated separately in a one-phase system with subsaturating amounts of organic solvent. The solvent concentration in the aqueous phase, at which 50% of the metabolic activity of the bacteria is lost, is used to express solvent toxicity. This concentration is found to be similar for the gram-positive Arthrobacter and the gram-negative Acinetobacter. Assuming the critical membrane concentration theory (G. J. Osborne et al. Enzyme Microb. Technol. 1990, 12: 281-291) to be valid, it can be concluded that differences in solvent tolerance between these two bacteria, cannot be ascribed to differences in response to molecular toxicity. Prediction of the toxicity of any solvent, using the critical membrane theory, appears to be possible in the case of alkanols or alkyl acetates. However, prediction of the toxicity of ethers appears to be impossible. (c) 1993 John Wiley & Sons, Inc.     

Development of a Selective Medium for the Isolation of Clostridium sporogenes and Related Organisms

An attempt was made to develop a selective isolation medium for Clostridium sporogenes and related organisms based on the ability of these organisms to obtain their energy for growth by means of coupled oxidation-reduction reactions between appropriate pairs of amino acids (Stickland reaction). Using a semi-defined basal medium containing various combinations of amino acids, it was found that Cl. sporogenes utilized a wider range of amino acid pairs than strains of five other species of clostridia known to carry out a Stickland-type fermentation.
With alanine and proline as the principal energy sources and the medium solidified with agar. it was shown that reference strains of Cl. sporogenes and proteolytic Cl. botulinum types A, B and F could be recovered almost quantitatively, with or without prior heating at 80 °C for 10 min. By contrast, growth of test strains of Streptococcus faecalis, Strep. faecium , 'saccharolytic' Cl. botulinum types B, C, D, E and F and 'proteolytic' strains of types C and D was suppressed on this medium, as were strains of 26 other species of clostridia.
Addition of 50 μg/ml of polymyxin to the agar medium had no detectable effect on the recovery of Cl. sporogenes or Cl. botulinum. When samples of soil and mud were plated on the antibiotic-containing medium, 63.1% of 225 isolates thus obtained were identified as Cl. sporogenes/botulinum.     

Relevance of Frank's solvent classification as typically aqueous and typically non-aqueous to activities of firefly luciferase, alcohol dehydrogenase, and alpha-chymotrypsin in aqueous binaries

Effects of cosolvent concentration on activity of fire fly luciferase, alpha-chymotrypsin, and alcohol dehydrogenase from baker's yeast (Saccharomyces cerevisiae) have been studied for several solvents with varying hydrophobicities (logP from +1.0 to -1.65) and polarities (dielectric constant from 7.4 to 109). The inhibitory effect of the cosolvent is examined in light of Frank's classification of solvents into 'typically aqueous (TA)' and 'typically non-aqueous (TNA).' The solvent concentration at which the enzyme activity decreases to half, the C(50) values, for TA solvents such as 1-cyclohexyl-2-pyrrolidinone, 2-butoxyethanol, 1-methyl-2-pyrrolidinone, tetrahydrofuran, t-butanol, and ethanol correlate quite well with their critical hydrophobic interaction concentration, rather than logP, while those for TNA solvents such as acetonitrile, dimethyl formamide, formamide, and dimethyl sulfoxide correlate well with logP. The interactions of TA solvents with proteins appear to be governed mainly by hydrophobic interactions while both hydrophobic and hydrophilic interactions play important role in case of TNA solvents.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids.

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Evaluation of a monoclonal antibody-based immunoassay for detecting type A Clostridium botulinum toxin produced in pure culture and an inoculated model cured meat system

A monoclonal antibody-based amplified enzyme-linked immunosorbent assay (ELISA) method for detecting Clostridium botulinum type A toxin was evaluated for its ability to detect the toxin in the supernatant fluid of pure cultures and after growth from Cl. botulinum spores inoculated into pork slurries. Slurries containing NaCl (1.5-4.5% w/v) and polyphosphate (0.3% w/v) were either unheated or heated, 80 degrees C/5 min + 70 degrees C/2 h, before storage at 15 degrees, 20 degrees or 27 degrees C. The presence of specific toxin was confirmed by mouse bioassay and results compared with those of the amplified ELISA method. A total of 49 strains, 39 Cl. botulinum and 10 Cl. sporogenes (putrefactive anaerobes), and 95 slurry samples were tested. Fourteen of 15 strains of type A Cl. botulinum and 34 of 36 slurry samples containing type A toxin were positive by ELISA. No false positive reactions occurred with Cl. botulinum types B, C, D, E and F, or with the 10 strains of Cl. sporogenes. However, toxin produced by one strain of Cl. botulinum type A (NCTC 2012) was not detected by the amplified ELISA.     

Isolation and characterization of Deinococcus geothermalis T27, a slightly thermophilic and organic solvent-tolerant bacterium able to survive in the presence of high concentrations of ethyl acetate

A solvent-tolerant, slightly thermophilic bacterium was isolated at 45 degrees C in the presence of toluene vapor provided as the sole carbon source. Strain T27 was identified as Deinococcus geothermalis T27. It could tolerate high concentrations of solvent provided as a nonaqueous layer (5% and 20%, v/v) to a cell suspension and had a remarkable ability to tolerate a broad range of solvents having log P(ow) values ranging from 5.6 of n-decane to as low as 0.7 of ethyl acetate. It was also able to utilize some of the solvents tested as a growth substrate at 45 degrees C. The addition of Ca(2+) ion, glucose and fructose partially promoted solvent tolerance. Cells exposed to ethyl acetate appeared to have a smaller size; however, the cell structure was not altered and was apparently well defined even after solvent shock. The tolerance of D. geothermalis T27 in the presence of high levels of toxic solvent stress at a comparatively high temperature indicated its potential use in biotechnological applications as well as bioremediation of xenobiotics.     

Extractive acetonobutylic fermentation by coupling ultrafiltration and distillation

An extractive acetonobutylic fermentation process is developed by integrating bioproduction, Ultrafiltration, and distillation, providing simultaneous retention of biomass, selective removal of inhibitors from the permeate, as well as separation and purification of acetone-butanol-ethanol solvents. Successive batch fermentations were performed with normal pressure distillation (98 degrees C), which permitted prolonging and enhancing (by a factor of 3) solvent production, with very few volume exchanges of medium (average dilution rate ws 0.002 h(-1)), and recovering on-line concentrated solvents. Different operating conditions were also tested in order to study the presence of extracellular autolytic enzymes as inhibition factors: It was shown that, (1) extracellular autolytic activity remains low during the larger part of fermentations, even without enzyme-inactivating thermotreatment in the distillation boiler, and (2) high-temperature distillation causes deleterious effects to the culture medium for long duration treatments. Progressive improvements of the process were achieved, first, by managing continuous runs, providing a minimum renewal of the culture medium and, mainly, by decreasing temperature and pressure of distilation. Solvent productivity then reached 2.6 g/L h for a 0.036 h(-1) average dilution rate, corresponding to a feed concentration of 156 g/L glucose actually consumed.     

Production of toxin by Clostridium botulinum type A strains cured by plasmids

Twelve strains of Clostridium botulinum type A and seven strains of Clostridium sporogenes were screened for plasmids by agarose gel electrophoresis of cleared lysates of cells from 5 ml of mid-log-phase culture. Nine type A strains had one or more plasmids of 4.3, 6.8, or 36 megadaltons (MDa); several strains showed a large plasmid of 61 MDa, but it was not consistently recovered. Four C. sporogenes strains had one or more plasmids of 4.3, 5.6 or 36 MDa. Isolates obtained from cultures of plasmid-containing C. botulinum type A strains grown in ionic detergent broth and from spontaneously arising variants were screened both for toxin production and for plasmid content. Toxigenicity of C. botulinum could not be correlated with the presence of any one plasmid.     

Effect of organic solvents on stability and activity of two related alcohol dehydrogenases: a comparative study.

A comparative study was performed regarding the catalytic activity and stability of two related enzymes (thermophilic alcohol dehydrogenase from Thermoanaerobacter brockii and its mesophilic counterpart from yeast) in the presence of a number of miscible and immiscible organic solvents. The study was performed in view of the practical usefulness of organic solvents for alcohol dehydrogenases which have been shown to catalyse a variety of industrially-important dehydrogenation reactions. A number of organic solvents of different physicochemical characteristics were used and substantial stabilization was achieved. The non-polar solvents utilized showed the ability to enhance thermal stability of both proteins. Protection against thermal denaturation was especially pronounced by n-dodecane, the solvent with the highest logP used in the present study. Dimethylformamide and dioxane, employed as two miscible organic solvents, showed the ability to cause substrate inhibition and changes in protein conformation as indicated by kinetic and fluorescence studies. A higher resistance of the thermophilic protein to the deleterious effect of pyridine and thermostabilization of the mesophilic enzyme by non-polar solvents are especially emphasized. Combined differences in protein structure and nature of organic solvents are suggested to explain the differences in stability and catalytic activity observed in the present investigation.     

Stearic acid solubility and cubic phase volume

Stearic acid (SA) is highly soluble in structurally diverse solvents. SA/solvent packing within a (24.8 A)3 cubic volume explains the stoichiometry of SA solubility at multiple temperatures in multiple solvents. In the absence of solvent, the cubic volume contains 25 molecules at van der Waals distances from each other. At 55 degrees C, SA occupied half the cubic volume in saturated solution of four structurally diverse solvents. Below 4% SA/volume (e.g. in acetonitrile), the head and foot of each SA molecules on average is more than one solvent molecule away from the head and foot of a neighboring SA molecule. At 50% SA/cubic volume, -CH2- groups on SA molecules are separated from neighboring -CH2- groups on SA molecules by a monolayer of solvent molecules. Lowering the temperature from 55 to 25 degrees C, the volume fraction of SA decreased by a factor of 2 (or more) for every 6 degrees C. Lowering temperature increased the relative number of column of solvent molecules in the cubic phase, and correspondingly, the distance between SA molecules within the cubic volume increased. In three of five solvents, molecular mechanics calculations demonstrated the van der Waals stabilization that occurs from SA/SA affinity in the absence of solvent is similar in magnitude to the van der Waals stabilization from SA/solvent affinity. Methyl-t-butyl ether was less stabilized than hexane, acetone or methanol because the more bulky molecules packed less efficiently within the cubic volume. The most efficient/most stable packing however was still as columns of solvent between columns of SA. The efficiency and stability of SA and solvent packing optimal within the (24.8 A)3 cubic volume. Between 100 and 8% SA, multiple SA molecules present within the cubic volume function as SA aggregates. Both inter- and intra-cubic (phase) volume properties of SA aggregates coexist. Although acetonitrile and SA at the molecular level are both rod shaped, acetonitrile disrupted the packing of SA molecules within the cubic phase. The disrupted packing explains the much lower solubility of SA in acetonitrile than in the other solvents. The same molecular structures (e.g. methanol) can either stabilize or disrupt the packing of aggregated SA molecules, depending upon temperature. The mechanisms of aggregation within cubic volumes could also occur with structurally more complicated lipids. Aggregation and dispersion from such cubic phases could also be present in more complex chemical and/or macromolecular environments.     

Entry into and release of solvents by Escherichia coli in an organic-aqueous two-liquid-phase system and substrate specificity of the AcrAB-TolC solvent-extruding pump

Growth of Escherichia coli is inhibited upon exposure to a large volume of a harmful solvent, and there is an inverse correlation between the degree of inhibition and the log P(OW) of the solvent, where P(OW) is the partition coefficient measured for the partition equilibrium established between the n-octanol and water phases. The AcrAB-TolC efflux pump system is involved in maintaining intrinsic solvent resistance. We inspected the solvent resistance of delta acrAB and/or delta tolC mutants in the presence of a large volume of solvent. Both mutants were hypersensitive to weakly harmful solvents, such as nonane (log P(OW) = 5.5). The delta tolC mutant was more sensitive to nonane than the delta acrAB mutant. The solvent entered the E. coli cells rapidly. Entry of solvents with a log P(OW) higher than 4.4 was retarded in the parent cells, and the intracellular levels of these solvents were maintained at low levels. The delta tolC mutant accumulated n-nonane or decane (log P(OW) = 6. 0) more abundantly than the parent or the delta acrAB mutant. The AcrAB-TolC complex likely extrudes solvents with a log P(OW) in the range of 3.4 to 6.0 through a first-order reaction. The most favorable substrates for the efflux system were considered to be octane, heptane, and n-hexane.     

Metabolic response of Pseudomonas putida during redox biocatalysis in the presence of a second octanol phase

A key limitation of whole-cell redox biocatalysis for the production of valuable, specifically functionalized products is substrate/product toxicity, which can potentially be overcome by using solvent-tolerant micro-organisms. To investigate the inter-relationship of solvent tolerance and energy-dependent biocatalysis, we established a model system for biocatalysis in the presence of toxic low logP(ow) solvents: recombinant solvent-tolerant Pseudomonas putida DOT-T1E catalyzing the stereospecific epoxidation of styrene in an aqueous/octanol two-liquid phase reaction medium. Using (13)C tracer based metabolic flux analysis, we investigated the central carbon and energy metabolism and quantified the NAD(P)H regeneration rate in the presence of toxic solvents and during redox biocatalysis, which both drastically increased the energy demands of solvent-tolerant P. putida. According to the driven by demand concept, the NAD(P)H regeneration rate was increased up to eightfold by two mechanisms: (a) an increase in glucose uptake rate without secretion of metabolic side products, and (b) reduced biomass formation. However, in the presence of octanol, only approximately 1% of the maximally observed NAD(P)H regeneration rate could be exploited for styrene epoxidation, of which the rate was more than threefold lower compared with operation with a non-toxic solvent. This points to a high energy and redox cofactor demand for cell maintenance, which limits redox biocatalysis in the presence of octanol. An estimated upper bound for the NAD(P)H regeneration rate available for biocatalysis suggests that cofactor availability does not limit redox biocatalysis under optimized conditions, for example, in the absence of toxic solvent, and illustrates the high metabolic capacity of solvent-tolerant P. putida. This study shows that solvent-tolerant P. putida have the remarkable ability to compensate for high energy demands by boosting their energy metabolism to levels up to an order of magnitude higher than those observed during unlimited growth.     

Evaluation of a monoclonal antibody-based immunoassay for detecting type A Clostridium botulinum toxin produced in pure culture and an inoculated model cured meat system

A monoclonal antibody-based amplified enzyme-linked immunosorbent assay (ELISA) method for detecting Clostridium botulinum type A toxin was evaluated for its ability to detect the toxin in the supernatant fluid of pure cultures and after growth from Cl. botulinum spores inoculated into pork slurries. Slurries containing NaCl (1.5–4.5% w/v) and polyphosphate (0.3% w/v) were either unheated or heated, 80°C/5 min + 70°C/2 h, before storage at 15°, 20° or 27°C. The presence of specific toxin was confirmed by mouse bioassay and results compared with those of the amplified ELISA method. A total of 49 strains, 39 Cl. botulinum and 10 Cl. sporogenes (putrefactive anaerobes), aiid 95 slurry samples were tested. Fourteen of 15 strains of type A Cl. botulinum and 34 of 36 slurry samples containing type A toxin were positive by ELISA. No false positive reactions occurred with Cl. botulinum types B, C, D, E and F, or with the 10 strains of Cl. sporogenes. However, toxin produced by one strain of Cl. botulinum type A (NCTC 2012) was not detected by the amplified ELISA.     

Effect of organic solvents on enantioselectivity of protease catalysis

The protease-catalyzed transesterifications between N-trifluoroacetyl-DL-phenylalanine 2,2,2-trifluoroethyl ester and 1-propanol were studied in a variety of anhydrous organic solvents at 30 degrees C. The protease preparations lyophilized from phosphate buffer solutions (pH 8.0) were used as catalysts. The organic solvent affected both rate of reaction and enantioselectivity differently. Proteases such as Aspergillus oryzae protease, subtilisin Carlsberg, and subtilisin BPN' always preferred the L-enantiomer in both hydrophilic and hydrophobic solvents, indicating no inversion of the L-specificity in hydrophobic solvents such as toluene. However, enantioselectivity was rather poor, with E (enantiomeric ratio) values not exceeding even one order of magnitude except for acetonitrile. There was a weak inverse correlation between E values of subtilisin Carlsberg and solvent hydrophobicity (logP). Acetonitrile was a preferable solvent in terms of both rate of reaction and enantioselectivity (E= 15 to 25) for processing L-amino acid derivatives in organic media. Organic solvents generally have potential advantages of processing D-amino acid derivatives. (c) 1997 John Wiley & Sons, Inc.