Molecular cloning and sequence analysis of cDNA for batroxobin, a thrombin-like snake venom enzyme

Determination of the nucleotide sequence of a cDNA for batroxobin, a thrombin-like enzyme from Bothrops atrox, moojeni venom, allowed elucidation of the complete amino acid sequence of batroxobin for the first time for a thrombin-like snake venom enzyme. The molecular weight of batroxobin is 25,503 (231 amino acids). The amino acid sequence of batroxobin exhibits significant homology with those of mammalian serine proteases (trypsin, pancreatic kallikrein, and thrombin), indicating that batroxobin is a member of the serine protease family. Based on this homology and enzymatic and chemical studies, the catalytic residues and disulfide bridges of batroxobin were deduced to be as follows: catalytic residues, His41, Asp86, and Ser178; and disulfide bridges, Cys7-Cys139, Cys26-Cys42, Cys74-Cys230, Cys118-Cys184, Cys150-Cys163, and Cys174-Cys199. The amino-terminal amino acid residue of batroxobin, valine, is preceded by 24 amino acids. This may indicate that the amino-terminal hydrophobic peptide (18 amino acids) is a prepeptide and that the hydrophilic peptide (6 amino acids), preceded by the putative prepeptide, is a propeptide.     

Determination of the positions of the disulfide bonds in aqualysin I (a thermophilic alkaline serine protease) of Thermus aquaticus YT-1

Aqualysin I is a heat-stable alkaline serine protease produced by Thermus aquaticus YT-1. Aqualysin I comprises 281 amino acid residues and contains four cysteine residues. The cysteine residues seemed to form disulfide bonds in the molecule. Thus, the positions of the disulfide bonds were investigated. Disulfide bond-containing peptides were identified by peptide mapping with HPLC before and after carboxymethylation of chymotryptic peptides of aqualysin I. The disulfide bond-containing peptides were isolated and then carboxymethylated. Carboxymethylcysteine-containing peptides were purified, and their amino acid compositions and sequences were determined. Based on the data obtained and the primary structure of aqualysin I, it was concluded that two disulfide bonds were formed between Cys67 and Cys99, and between Cys163 and Cys194.     

Cloning, nucleotide sequence, and expression of Achromobacter protease I gene

Achromobacter protease I (API) is a lysine-specific serine protease which hydrolyzes specifically the lysyl peptide bond. A gene coding for API was cloned from Achromobacter lyticus M497-1. Nucleotide sequence of the cloned DNA fragment revealed that the gene coded for a single polypeptide chain of 653 amino acids. The N-terminal 205 amino acids, including signal peptide and the threonine/serine-rich C-terminal 180 amino acids are flanking the 268 amino acid-mature protein which was identified by protein sequencing. Escherichia coli carrying a plasmid containing the cloned API gene overproduced and secreted a protein of Mr 50,000 (API') into the periplasm. This protein exhibited a distinct endopeptidase activity specific for lysyl bonds as well. The N-terminal amino acid sequence of API' was the same as mature API, suggesting that the enzyme retained the C-terminal extended peptide chain. The present experiments indicate that API, an extracellular protease produced by gram-negative bacteria, is synthesized in vivo as a precursor protein bearing long extended peptide chains at both N and C termini.     

Characterization of a recombinant murine interleukin-6: assignment of disulfide bonds

Murine interleukin 6 (mIL-6) has been synthesized as a fusion protein using a lac operon inducible plasmid in Escherichia coli. The first 8 amino acids are from the N-terminus of bacterial beta-galactosidase and the last 175 amino acids are from residue number 12 to the end of native mIL-6. This fusion protein is equipotent with the native molecule in the hybridoma growth factor assay and has comparable receptor binding characteristics. The two disulfide bridges in mIL-6 have been identified by Staphylococcus aureus V8 protease peptide mapping and Edman degradation of cystine-containing peptides. It has been shown that there are disulfide bonds between Cys46-Cys52 and Cys75-Cys85.     

Primary structure and disulfide bridge location of arrowhead double-headed proteinase inhibitors.

Two arrowhead proteinase inhibitors (inhibitors A and B) were characterized and their primary structures were determined. Both inhibitors A and B are double-headed and multifunctional protease inhibitors. Inhibitor A inhibits an equimolar amount of trypsin and chymotrypsin simultaneously and weakly inhibits kallikrein. Inhibitor B inhibits two molecules of trypsin simultaneously and inhibits kallikrein more strongly than does inhibitor A. The amino acid sequences of inhibitors A and B were determined by sequencing the reduced and S-carboxamidomethylated proteins and their peptides produced by cyanogen bromide or proteolytic lysylendopeptidase or Staphylococcus aureus V8 protease cleavage. Inhibitors A and B consist of 150 amino acid residues with three disulfide bonds (Cys 43-Cys 89, Cys 110-Cys 119, and Cys 112-Cys 115) and share 90% sequence identity, with 13 different residues. Since the primary structures are totally different from those of all other serine protease inhibitors so far known, these inhibitors might be classified into a new protease inhibitor family.     

Direct identification of disulfide bond linkages in human insulin-like growth factor I (IGF-I) by chemical synthesis

The primary structure of human IGF-I, except for the disulfide bond system, has been reported by Rinderknecht and Humbel. IGF-I afforded the corresponding characteristic peptide fragment on V8 protease digestion, which contained Cys6, Cys47, Cys48, and Cys52. Two possible fragments, Type I with Cys6-Cys47 and Cys48-Cys52, and Type II with Cys6-Cys48 and Cys47-Cys52, were synthesized. The disulfide bond system of IGF-I was unequivocally determined to be the Type II form along with Cys18-Cys61. Interestingly, the Type I system was included in the disulfide bond isomer produced as the main by-product in the refolding step on IGF-I synthesis by the recombinant DNA method.     

Location of disulfide bonds within the sequence of human serum cholinesterase

Human serum cholinesterase was digested with pepsin under conditions which left disulfide bonds intact. Peptides were isolated by high pressure liquid chromatography, and those containing disulfide bonds were identified by a color assay. Peptides were characterized by amino acid sequencing and composition analysis. Human serum cholinesterase contains 8 half-cystines in each subunit of 574 amino acids. Six of these form three internal disulfide bridges: between Cys65-Cys92, Cys252-Cys263, and Cys400-Cys519. A disulfide bond with Cys65 rather than Cys66 was inferred by homology with Torpedo acetylcholinesterase. Cys571 forms a disulfide bridge with Cys571 of an identical subunit. This interchain disulfide bridge is four amino acids from the carboxyl terminus. A peptide containing the interchain disulfide is readily cleaved from cholinesterase by trypsin (Lockridge, O., and La Du, B. N. (1982) J. Biol. Chem. 257, 12012-12018), suggesting that the carboxyl terminus is near the surface of the globular tetrameric protein. The disulfide bridges in human cholinesterase have exactly the same location as in Torpedo californica acetylcholinesterase. There is one potential free sulfhydryl in human cholinesterase at Cys66, but this sulfhydryl could not be alkylated. Comparison of human cholinesterase, and Torpedo and Drosophila acetylcholinesterases to the serine proteases suggests that the cholinesterases constitute a separate family of serine esterases, distinct from the trypsin family and from subtilisin.     

cDNA cloning and expression of acutin

Acutin, a thrombin-like enzyme was purified from Agkistrodon acutus venom in three steps by DEAE-Sepharose CL-6B, Superose 12 column on FPLC and Mono-Q column chromatographies. Its first 15 N-terminal amino acid residues sequence was then determined and the acutin cDNA was isolated from venom gland total RNA using RT-PCR. Determination of its nucleotide sequence allowed elucidation of the amino acid sequence of mature peptide for the first time. The mature acutin has 233 amino acids and its amino acid sequence exhibits significant homology with those of thrombin-like enzymes from crotaline snakes venoms. Based on the homology, the catalytic residues and disulfide bridges of acutin were deduced to be as follows: catalytic residues, His41, Asp84 and Ser179; and disulfide bridges, Cys7-Cys139, Cys26-Cys42, Cys74-Cys231, Cys118-Cys185, Cys150-Cys164, Cys175-Cys200. The recombinant acutin has been expressed in E. coli and purified by affinity column. The renatured recombinant acutin is reported for the first time to have the activity of clotting fibrinogen and arginine-esterase.     

Role of disulphide bonds in a thermophilic serine protease aqualysin I from Thermus aquaticus YT-1

A thermophilic serine protease, Aqualysin I, from Thermus aquaticus YT-1 has two disulphide bonds, which are also found in a psychrophilic serine protease from Vibrio sp. PA-44 and a proteinase K-like enzyme from Serratia sp. at corresponding positions. To understand the significance of these disulphide bonds in aqualysin I, we prepared mutants C99S, C194S and C99S/C194S (WSS), in which Cys69-Cys99, Cys163-Cys194 and both of these disulphide bonds, respectively, were disrupted by replacing Cys residues with Ser residues. All mutants were expressed stably in Escherichia coli. The C99S mutant was 68% as active as the wild-type enzyme at 40 degrees C in terms of k(cat) value, while C194S and WSS were only 6 and 3%, respectively, as active, indicating that disulphide bond Cys163-Cys194 is critically important for maintaining proper catalytic site conformation. Mutants C194S and WSS were less thermostable than wild-type enzyme, with a half-life at 90 degrees C of 10 min as compared to 45 min of the latter and with transition temperatures on differential scanning calorimetry of 86.7 degrees C and 86.9 degrees C, respectively. Mutant C99S was almost as stable as the wild-type aqualysin I. These results indicate that the disulphide bond Cys163-Cys194 is more important for catalytic activity and conformational stability of aqualysin I than Cys67-Cys99.     

Primary structure of the major pepsin inhibitor from the intestinal parasitic nematode Ascaris suum

The major pepsin inhibitor from Ascaris suum was isolated by affinity chromatography and chromatofocusing. Its amino acid sequence was determined by automated Edman degradation of peptide fragments. Peptides were produced by chemical and enzymatic cleavage of pyridylethylated protein and were purified by reverse-phase high-performance liquid chromatography. The inhibitor consists of 149 residues with the following sequence: QFLFSMSTGP10FICTVKDNQV20FVANLPWTML30EGDDIQVGKE40 FAARVEDCTN50VKHDMAPTCT60KPPPFCGPQD70MKMFNFVGCS80VLGNKLFIDQ90KYVRDLTAK D100 HAEVQTFREK110IAAFEEQQEN120QPPSSGMPHG130AVPAGGLSPP140PPPSFCTVQ149. It has a molecular weight of 16,396. All cysteines are engaged as disulfide bonds: Cys(13)-Cys(59), Cys(48)-Cys(66), and Cys(79)-Cys(146). The protein is probably composed of two domains connected by a short hydrophobic region. This is the first aspartyl protease inhibitor of animal origin that has been sequenced. The sequence has no significant homology with any other known protein.     

Disulfide arrangement of human insulin-like growth factor I derived from yeast and plasma.

The disulfide arrangement of yeast derived human insulin-like growth factor I (yIGF-I) was determined using a combination of Staphylococcus aureus V8 protease mapping, fast-atom-bombardment mass spectrometry as well as amino acid sequence and composition analysis. Three disulfide bridges were found between the following cysteine residues: Cys6-Cys48, Cys47-Cys52 and Cys18-Cys61. IGF-I isolated from human plasma (pIGF-I) was found to have an identical disulfide configuration. A yeast-derived isomeric form of IGF-I (yisoIGF-I) exhibited an altered disulfide arrangement: Cys6-Cys47, Cys48-Cys52 and Cys18-Cys61. Radioreceptor analysis of pIGF-I and yIGF-I showed high specific activity, 20,000 U/mg. However, yisoIGF-I demonstrated a severely reduced ability to bind to the IGF-I receptor (19%) and was less potent in provoking a mitogenic response in Balb/C 3T3 fibroblasts (50% at doses 10-100 ng/ml). The data demonstrate the importance of correct disulfide arrangement in IGF-I for full biological activity.     

Primary structure of nuclease P1 from Penicillium citrinum

The primary structure of nuclease P1, which cleaves both RNA and single-stranded DNA, from Penicillium citrinum was elucidated. The complete amino acid sequence consisting of 270 residues was determined by analysis of peptides obtained by digestion with Achromobacter protease I of the reduced and S-aminoethylated protein and by digestion with Staphylococcus aureus V8 protease of the reduced and S-carboxymethylated protein. Four half-cystine residues were assigned to Cys72-Cys217 and Cys80-Cys85. N-Glycosylated asparagine residues were identified at positions 92, 138, 184 and 197. Fast-atom-bombardment and laser-ionization MS were successfully used to confirm the determined amino acid sequences of peptides and to estimate the molecular mass of this glycoprotein having heterogenous sugar moieties, respectively. Comparison of the amino acid sequence of nuclease P1 with other nucleases revealed that the protein has a high degree of sequence identity (50%) with nuclease S1 from Aspergillus oryzae. The His-Phe-Xaa-Asp-Ala sequence (positions 60-64) is similar to the sequence (His-Phe-Asp-Ala) involving the active-site His119 of bovine pancreatic RNase A, and the Pro-Leu-His sequence (positions 124-126) is identical with the sequence involving the active-site His134 of porcine pancreatic DNase I.     

Amino acid sequence of thermostable direct hemolysin produced by Vibrio parahaemolyticus

The complete amino acid sequence of the subunit of thermostable direct hemolysin, a dimeric protein composed of identical subunits isolated from Vibrio parahaemolyticus, was determined by sequencing BrCN-peptides, their tryptic peptides, and overlaps obtained by Achromobacter protease I digestion. The subunit consists of 165 amino acid residues with the sole disulfide bond between Cys 151 and Cys 161. It is deduced that the biologically active hemolysin is formed by noncovalent association of subunits which are not linked together by disulfide bonds. The primary structure of hemolysin elucidated in the present study is essentially the same as that deduced from the nucleotide sequence of a gene encoding the protein but differs in 9 amino acid residues, suggesting the possibility of the presence of multiple genes for the thermostable direct hemolysin in Vibrio parahaemolyticus.     

Disulfide bond structure of the atrial natriuretic peptide receptor extracellular domain: conserved disulfide bonds among guanylate cyclase-coupled receptors

The disulfide bond structure of the extracellular domain of rat atrial natriuretic peptide (ANP) receptor (NPR-ECD) has been determined by mass spectrometry (MS) and Edman sequencing. Recombinant NPR-ECD expressed in COS-1 cells and purified from the culture medium binds ANP with as high affinity as the natural ANP receptor. Reaction with iodoacetic acid yielded no S-carboxymethylcysteine, indicating that all six Cys residues in NPR-ECD are involved in disulfide bonds. Electrospray ionization MS of NPR-ECD deglycosylated by peptide-N-glycosidase F gave a molecular mass of 48377.5+/-1.6 Da, which was consistent with the presence of three disulfide bonds. Liquid chromatography MS analysis of a lysylendopeptidase digest yielded three cystine-containing fragments with disulfide bonds Cys(60)-Cys(86), Cys(164)-Cys(213) and Cys(423)-Cys(432) based on their observed masses. These bonds were confirmed by Edman sequencing of each of the three fragments. No evidence for an inter-molecular disulfide bond was found. The six Cys residues in NPR-ECD, forming a 1-2, 3-4, 5-6 disulfide pairing pattern, are strictly conserved among A-type natriuretic peptide receptors and are similar in B-type receptors. We found that in other families of guanylate cyclase-coupled receptors, the Cys residues involved in 1-2 and 5-6 disulfide pairs are conserved in nearly all, suggesting an important contribution of these disulfide bonds to the receptor's structure and function.     

Assignment of the disulfide bonds of Ole e 1, a major allergen of olive tree pollen involved in fertilization.

The most prevalent allergen from olive tree pollen, Ole e 1, consists of a single polymorphic polypeptide chain of 145 amino acids which includes six cysteine residues at positions 19, 22, 43, 78, 90 and 131. By using an homogeneous form of the allergen expressed in Pichia pastoris, the array of the disulfide bridges has been elucidated. Specific proteolysis with thermolysin and reverse-phase HPLC separation of the peptides allowed the determination of the disulfide bond between Cys43 and Cys78. Another thermolytic product, which contained three peptides linked by the remaining four cysteines, was digested with Glu-specific staphylococcal V8 protease and the products isolated by reverse-phase HPLC. Amino acid compositions and Edman degradation of the peptide products indicated the presence of the disulfide bonds at Cys19-Cys90 and Cys22-Cys131. These data can help in the analysis of the three-dimensional structure of the protein as well as in studies of its allergenic determinants.     

家蝇防御素基因的cDNA克隆及序列分析

Defensin is a kind of cationic.inducible antimicrobial peptide found in a large range of living organisms that contributes to host defense by disrupting the cytoplasmic membrane of microorganisms.with their broad antimicrobial spectrum and strong pharmaceutical effects.antimicrobial peptides,including defensins,represent a source of novel antibiotic agents.A novel full-length 430 base pairs cDNA of an insect defensin was cloned using polymerase chain reaction (PCR) from the cDnA library of houseflies(Musca domestica) that had been challenged by E.coli and staphylococcus taincd an NH2-terminal signal sequence(1-22)followed by a propeptide and the mature peptide(53-92),The sequence identity with other insect defensin is between 51% and 73%.The mature peptide,with a predicted molecular weight of 4.0kDa,and pI of 8.69,has 1 negative charged amino acid and 4 positice ones,the putative housefly defensin is characterized by 6 invariant cysteine residues forming 3 disulfide bonds,Cys1-Cys4,Cys2-Cys5 and Cys3-Cys6,These results suggest that the novel full-length cDNA of the defensin gene.Denominated Mdde,has been successfully cloned from houseflies.     

Convergent solid-phase synthesis of hirudin.

Hirudin variant 1 (HV1), a small protein consisting of 65 amino acids and three disulfide bonds, was synthesized by using Fmoc-based convergent methods on 2-chlorotrityl resin (CLTR). The linear sequence was assembled by the sequential condensation of 7 protected fragments, on the resin-bound 55-65 fragment. The conditions of fragment assembly were carefully studied to determine the most efficient synthetic protocol. Crude reduced [Cys(16, 28)(Acm)]-HV1 thus obtained was easily purified to homogeneity by RP-HPLC. Disulfide bridges were successfully formed by a two-step procedure, involving an oxidative folding step to form Cys(6)-Cys(14) and Cys(22)-Cys(39) linkages, followed by iodine oxidation to form the Cys(16)-Cys(28) bond. The correct disulfide bond alignment was established by peptide mapping using Staphylococcus aureus V8 protease at pH 4.5.     

Amino acid sequence of nuclease S1 from Aspergillus oryzae

The amino acid sequence of nuclease S1, a nuclease which cleaves both single-stranded DNA and RNA, from Aspergillus oryzae was determined. Reduced and S-carboxymethylated or S-aminoethylated nuclease S1 was digested with Achromobacter protease I, Staphylococcus aureus V8 protease, or endoproteinase Asp-N. Peptides thus obtained were purified by reverse-phase high-performance liquid chromatography and sequenced, and the complete primary structure was established. Nuclease S1 consists of a single peptide chain of 267 amino acid residues bearing N-glycosylated Asns 92 and 228. Five half-cystine residues are present at positions 25, 72, 80, 85, and 216, and the latter four residues are implicated in the formation of disulfide bonds by analogy with those in nuclease P1. Two short stretches of sequences involving His 60 and His 125 are shown to be identical with those involving active site His 119 in bovine ribonuclease A and active-site His 134 in porcine deoxyribonuclease I, respectively.     

Assignment of the disulfide bonds in the sweet protein brazzein

The thermostable sweet protein brazzein consists of 54 amino acid residues and has four intramolecular disulfide bonds, the location of which is unknown. We found that brazzein resists enzymatic hydrolysis at enzyme/substrate ratios (w/w) of 1:100-1:10 at 35–40°C for 24–48 h. Brazzein was hydrolyzed using thermolysin at an enzyme/substrate ratio of 1:1 (w/w) in water, pH 5.5. for 6 h and at 50°C. The disulfide bonds were determined, by a combination of mass spectrometric analysis and amino acid sequencing of cystine-containing peptides, to be between Cys4-Cys52, Cys16-Cys37, Cys22-Cys47, and Cys26-Cys49. These disulfide bonds contribute to its thermostability. © 1996 John Wiley & Sons, Inc.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.