极耐热性乳酸脱氢酶高效表达、纯化及酶学性质

从海栖热袍菌扩增出编码乳酸脱氢酶的基因并将其插入热激载体pHsh构建表达质粒,在大肠杆菌Escherichia coli中进行表达产生极耐热性乳酸脱氢酶Tm-LDH。基因表达产物通过热处理,可以一步获得接近电泳纯的重组酶。酶学性质研究表明,Tm-LDH的最适反应温度为95℃,最适pH 7.0;纯酶在90℃的半衰期为2 h,在pH 5.5–8.0之间最稳定;SDS-PAGE结果显示分子量为33 kDa,与理论推算值相吻合。以丙酮酸和NADH为底物时,相对于丙酮酸的Km值1.7 mmol/L,Vmax为3.8×104 U/mg;相对于NADH的Km值7.2 mmol/L,Vmax值为1.1×105 U/mg。Tm-LDH基因在T7载体中未能实现高效表达,但是在热激载体pHsh中得到了可溶性超量表达,表达水平达到340 mg/L。该酶在65℃反应条件下,活性达到最高活性的50%,并能保持活性不变,这使该酶能够与常温酶匹配,在辅酶NAD再生体系的建立中具有广泛的用途。     

dhaBCE基因与yqhD基因串联表达载体的构建及其生物转化甘油

将来自于肺炎克雷伯氏杆菌的甘油脱水酶基因插入到质粒pET28(a+) -yqhD的上游,并用SD序列隔开,串联构建重组质粒pET28(a+)dhaBCE-yqhD,转化到大肠杆菌E.coli novablue中进行共表达。结果显示：含有pET28(a+) dhaBCE-yqhD的重组菌在28℃条件下,IPTG诱导16h后,甘油脱水酶和yqhD氧化还原酶的酶活力分别达到35 U/ mg和 82 U/ mg ,而对照组检测不到甘油脱水酶酶活;当甘油浓度为55g/L,产物1,3-PD的产量可达39g/L;甘油浓度过量不利于产物合成,且产物1,3-丙二醇对合成反应具有一定的抑制作用。     

Gluconobacter oxydans木糖醇脱氢酶基因的克隆表达及木糖醇的转化分析

从氧化葡萄糖酸杆菌(Gluconobacter oxydans)的基因组DNA上扩增出木糖醇脱氢酶基因xdh,构建了诱导型表达载体pSE-xdh,导入E.coli JM109后获得了高效表达木糖醇脱氢酶基因的重组菌JM109/pSE-xdh。通过HisTrap HP亲和层析和SephacrylS 300分子筛两步纯化从细胞中得到纯酶,并对酶学性质进行研究。XDH最适还原反应的pH值为5.0,最适还原反应的温度为35℃;最适氧化反应的pH值为11.0,最适氧化反应的温度为30℃。重组菌中的XDH依赖NADH,对NADH的米氏常数Km=57.8 mmol/L,最大反应速率Vmax=1209.1 mmol/(ml·min)。重组菌的XDH酶活力为13.9 U/mg。利用重组菌和原始菌混合静止细胞转化D 木酮糖,16 h 28.0 g/L D木酮糖生成16.7 g/L木糖醇,而原始菌单独转化只生成8.3 g/L木糖醇。     

Molecular cloning, gene expression, purification and characterization of fermentative D-lactate dehydrogenase from S.marcescens H3010

通过PCR技术从粘质沙雷氏菌H3010基因组DNA中扩增出该D-乳酸脱氢酶基因,连接至pET-28a(+)表达载体,转入大肠杆菌BL21 (DE3)中进行了重组表达,优化了酶纯化的条件,并对其酶学性质进行初步研究.结果表明,获得的该酶编码基因全长993 bp,编码330个氨基酸,大小为37 kDa.经优化表达及纯化条件后重组酶纯度可达90％.酶学性质研究发现,该重组酶最适反应温度为60℃,最适酶促反应pH为7.5(0.2 mol/L磷酸盐缓冲液),37℃下测得对底物丙酮酸的动力学参数Km =3.39 mmol/L,Vmax =6.87 mmol/( mg · min),对辅酶NADH的动力学参数Km=1.43 mmol/L,Vmax=1.61 mmol/( mg· min).为酶法生产D-乳酸及利用代谢工程构建产D-乳酸的基因工程菌打下基础.     

β-脱卤酶的基因克隆表达及其酶学性质

根据GenBank中的序列设计引物,克隆芽孢杆菌中的β-脱卤酶基因(命名为bhd)。以pET30a(+)为载体、Escherichia coli BL21(DE3)-CondonPlus为宿主菌,实现了bhd的高效表达。使用HisTrapTMFF亲和层析柱纯化重组β-脱卤酶,分子量约为23.1 kD。酶学性质研究表明,纯化的重组β-脱卤酶水解3-氯丙酸制备3-羟基丙酸的最适反应体系为30°C,100 mmol/L,pH 7.0的磷酸钠缓冲液。在最适反应条件下,重组β-脱卤酶的比活为16.2 U/mg,Km和Vmax分别为3.26μmol/L和17.86 mmol/(min.g protein)。在最适反应条件下,以10 mmol/L 3-氯丙酸为底物,反应36 h的转化率在93%以上。     

荧光假单胞菌短链脱氢酶的克隆、表达及酶学性质分析

为了研究荧光假单胞菌中短链脱氢酶的生理角色和催化特性,从荧光假单胞菌Pseudomonas fluorescens GIM1.49基因组DNA克隆表达了一个短链脱氢酶的编码基因pfd,并分析了该基因产物的酶学性质。基因pfd全长684 bp,编码227个氨基酸,推算分子量为24.2 kDa。将携带短链脱氢酶基因的重组质粒pET28b-pfd转入大肠杆菌BL21(DE3) 进行表达,得到了28 kDa的表达产物。重组荧光假单胞菌短链脱氢酶 (PFD) 能氧化4-氯-3-羟基丁酸乙酯、1-苯乙醇、苯甲醇、仲丁醇和还原4-氯-乙酰乙酸乙酯、2-溴-苯乙酮、4-溴-苯乙酮等底物。以4-氯-3-羟基丁酸乙酯为底物时活力最高,Km值为186.90 mmol/L,Vmax为89.56 U/mg。氧化4-氯-3-羟基丁酸乙酯时,最适反应温度和pH分别为12 ℃和10.5,倾向于利用NAD+作辅酶;而还原4-氯-乙酰乙酸乙酯时,最适温度和pH为24 ℃和8.8,倾向于利用NADPH作辅酶。重组PFD能耐受50％ (V/V) 的甲醇等有机助溶剂,Ca2+ (1 mmol/L) 和EDTA (5 mmol/L) 对其酶活有一定的促进作用。上述结果表明,重组PFD是一个新型的短链脱氢酶,其代谢角色推测与卤代次级醇的氧化降解有关。     

粘质沙雷氏菌H3010发酵型D-乳酸脱氢酶基因的克隆表达、纯化及酶学性质研究

通过PCR技术从粘质沙雷氏菌H3010基因组DNA中扩增出该D-乳酸脱氢酶基因,连接至pET-28a（＋）表达载体,转入大肠杆菌BL21（DE3）中进行了重组表达,优化了酶纯化的条件,并对其酶学性质进行初步研究。结果表明,获得的该酶编码基因全长993bp,编码330个氨基酸,大小为37kDa。经优化表达及纯化条件后重组酶纯度可达90％。酶学性质研究发现,该重组酶最适反应温度为60℃,最适酶促反应pH为7．5（O．2mol／L磷酸盐缓冲液）,37℃下测得对底物丙酮酸的动力学参数Km=3．39mmol／L,Vmax=6．87mmol／（mg·min）,对辅酶NADH的动力学参数Km=1．43mmol／L,Vmax=1．61mmo]／（mg·min）。为酶法生产D-乳酸及利用代谢工程构建产D-乳酸的基因工程菌打下基础。     

海栖热袍杆菌来源的极耐热碱性果胶裂解酶的表达、纯化及定性

将来源于极端嗜热菌属海栖热袍杆菌Thermotoga maritima MSB8的编码碱性果胶裂解酶的结构基因pelA与新型热激质粒pHsh连接, 得到重组质粒pHsh-pelA, 运用mRNA二级结构预测软件对pHsh-pelA的翻译起始区的二级结构进行优化, 得到了具有最佳mRNA二级结构及自由能的质粒pHsh-pelC。将重组质粒pHsh-pelC转入大肠杆菌JM109(DE3)进行表达, 得到了一种极耐热性碱性果胶裂解酶(PelC)。对重组酶的酶学性质研究发现, 该酶的最适反应温度为90oC, 最适反应pH为8.5, 在pH 8.2~9.8之间酶活力稳定, 95oC酶活半衰期为2 h, 并且该酶依赖Ca2+作为活性离子。在工业生产常用温度60oC下, 该酶能够长时间保持稳定, 并具有较高的酶活力。以多聚半乳糖醛酸(PGA)为底物时, 其动力学参数Km值为0.11 mmol/L, Vmax值为327 U/mg。SDS-PAGE结果显示该重组酶的分子量为43 kD, 与理论值相符。基于热激载体pHsh的重组表达系统具有诱导表达简便、诱导方式廉价的优点, 且重组酶热稳定性非常好, 这对该酶的大规模发酵应用具有重要意义。     

谷氨酸棒杆菌YILW苏氨酸脱水酶基因的克隆表达及酶学性质

将L-异亮氨酸生产菌谷氨酸棒杆菌(Corynebacterium glutamicum YILW)苏氨酸脱水酶(threonine de-hydratase,TD)的编码基因ilvA在大肠杆菌中进行异源表达及进行初步的酶学性质研究。分别以C.glutamicum ATCC13032、YILW的基因组DNA为模板,利用PCR技术扩增出苏氨酸脱水酶的编码基因ilvA,测序获得编码序列。利用质粒PET-His将该基因在大肠杆菌BL21(DE3)中进行重组表达、金属螯合纯化,对其酶学性质进行初步研究。结果显示C.glutamicum YILW编码基因序列与已报道的ilvA序列相差5个碱基,相似度为99.6%,第383位氨基酸由苯丙氨酸突变为缬氨酸。酶学性质研究表明:重组酶YilwTD最适反应温度为32℃,在20~55℃范围内该酶较稳定,最适pH为6.7,该酶底物专一性强,对最适底物苏氨酸的米氏常数Km=8.32 mmol/L,最大反应速度Vmax=3.18×104U/mg,与野生型酶相比,突变(F383V)后可显著降低终产物对酶的反馈抑制作用。为揭示突变对苏氨酸脱水酶活性的影响及进一步利用基因工程技术改造L-异亮氨酸生产菌,提高L-异亮氨酸产量奠定了基础。     

极耐热性b-葡萄糖醛酸酶的高效表达和酶学性质及其 应用

从海栖热袍菌克隆出编码热稳定性b-葡萄糖醛酸酶基因, 以热激载体pHsh为表达质粒, 在大肠杆菌中得到高效表达。基因表达产物通过一步热处理后, 酶纯度达电泳均一。纯化重组酶酶学性质研究表明, b-葡萄糖醛酸酶的最适反应温度为80oC, 最适反应pH为5.0, pH 5.8~ 8.2之间酶的稳定性较好, 80oC的半衰期为2 h, SDS-PAGE结果显示分子量为65.9 kD, 与理论推算值相吻合。以对硝基苯-b-葡萄糖醛酸苷(pNPG)为底物时, 其动力学参数Km值0.18 mmol/L, Vmax值为312 u/mg。初步的应用分析表明, 该重组酶能催化甘草酸转化为甘草次酸。     

Molecular Cloning, Co-expression, and Characterization of Glycerol Dehydratase and 1,3-Propanediol Dehydrogenase from Citrobacter freundii

1,3-Propanediol (1,3-PD), an important material for chemical industry, is biologically synthesized by glycerol dehydratase (GDHt) and 1,3-propanediol dehydrogenase (PDOR). In present study, the dhaBCE and dhaT genes encoding glycerol dehydratase and 1,3-propanediol dehydrogenase respectively were cloned from Citrobacter freundii and co-expressed in E. coli. Sequence analysis revealed that the cloned genes were 85 and 77 % identical to corresponding gene of C. freundii DSM 30040 (GenBank No. U09771), respectively. The over-expressed recombinant enzymes were purified by nickel-chelate chromatography combined with gel filtration, and recombinant GDHt and PDOR were characterized by activity assay, kinetic analysis, pH, and temperature optimization. This research may form a basis for the future work on biological synthesis of 1,3-PD.     

Purification of 1,3-propanediol dehydrogenase from Citrobacter freundii and cloning, sequencing, and overexpression of the corresponding gene in Escherichia coli.

1,3-Propanediol dehydrogenase (EC 1.1.1.202) was purified to homogeneity from Citrobacter freundii grown anaerobically on glycerol in continuous culture. The enzyme is an octamer of a polypeptide of 43,400 Da. When tested as a dehydrogenase, the enzyme was most active with substrates containing two primary alcohol groups separated by one or two carbon atoms. In the physiological direction, 3-hydroxypropionaldehyde was the preferred substrate. The apparent Km values of the enzyme for 3-hydroxypropionaldehyde and NADH were 140 and 33 microM, respectively. The enzyme was inhibited by chelators of divalent cations but could be reactivated by the addition of Fe2+. The dhaT gene, encoding the 1,3-propanediol dehydrogenase, was cloned, and its nucleotide sequence (1,164 bp) was determined. The deduced dhaT gene product (387 amino acids, 41,324 Da) showed a high level of similarity to a novel family (type III) of alcohol dehydrogenases. The dhaT gene was overexpressed in Escherichia coli 274-fold by using the T7 RNA polymerase/promoter system.     

丁酸梭菌1，3-丙二醇氧化还原酶基因dhaT的克隆及在大肠杆菌中的表达

以丁酸梭菌（Clostridium butyricum）基因组DNA为模板,利用PCR技术扩增得到1,3-丙二醇氧化还原酶基因dhaT,将它连接到pMD18一T载体上,得到重组质粒pMD—dhaT,对此重组质粒进行序列测定,对其DNA序列分析表明,dhaT基因全长为1 158bp。将dhaT基因插入表达载体pSE-380中,构建成重组子pSE—dhaT,并在大肠杆菌JMl09中进行诱导表达。研究表明,以1,3-丙二醇为底物时,基因工程菌在37℃下,以1．0mmol／L IPTG诱导14h,酶活力达到16．28U／mL,比原始菌株提高5、6倍。     

克雷伯杆菌甘油脱氢酶和1,3-丙二醇氧化还原酶的动力学机制

本研究主要对克雷伯杆菌甘油转化1,3-丙二醇代谢途径中的2个关键酶甘油脱氢酶(GDH)、1,3-丙二醇氧化还原酶(PDOR)反应机制和动力学进行了研究。首先,通过初速度和产物抑制动力学研究确定了GDH、PDOR双底物酶促反应机制为有序BiBi机制,明确了由反应物消耗到产物生成之间的历程。其次,建立了GDH、PDOR双底物酶促反应动力学模型,由动力学模型可知,在偶合反应中,如果GDH和PDOR酶量相同,GDH氧化反应成为限速反应,而辅酶I将主要以氧化型NAD+形式存在。动力学信息为酶法合成1,3-丙二醇和代谢工程研究提供理论指导。     

Decrease of 3-hydroxypropionaldehyde accumulation in 1,3-propanediol production by over-expressing <Emphasis Type="Italic">dha</Emphasis>T gene in <Emphasis Type="Italic">Klebsiella pneumoniae</Emphasis> TUAC01

Glycerol can be biologically converted to 1,3-propanediol, a key raw material required for the synthesis of polytrimethylene terephthalate and other polyester fibers. In 1,3-propanediol synthesis pathway, 3-hydroxypropionaldehyde (3-HPA) was an inhibitory intermediary metabolite. The accumulation of 3-HPA in broth would cause an irreversible cessation of the fermentation process. With the object of reducing 3-HPA level in the fermentation broth, dhaT gene which encodes 1,3-propanediol oxidoreductase (PDOR) was cloned and over expressed in 1,3-propanediol producing bacterium Klebsiella pneumoniae TUAC01. dhaT gene was linked downstream of the ptac promoter in an expressing vector pDK6 to form plasmid pDK-dhaT. The newly formed pDK-dhaT was transformed to K. pneumoniae TUAC01. Under the inducement of IPTG, PDOR was over-expressed when the constructed strain was cultured on an LB medium or a fermentation medium. A 5 L scale-up fermentation experiment was done to test the 3-HPA accumulation in broth, with the initial substrate glycerol 30 g/L; the peak levels of 3-HPA in broth were 7.55 and 1.49 mmol/L for control host strain and the constructed strain, respectively. In 50 g/L initial glycerol experiment, the peak level of 3-HPA in broth was 12.57 and 2.02 mmol/l for the control host strain and the constructed strain, respectively. Thus the fermentation cessation caused by the toxicity of 3-HPA was alleviated in the constructed strain.     

产1,3-丙二醇新型重组大肠杆菌的构建

利用PCR技术从大肠杆菌(Escherichia coli )中扩增出1.16 kb的编码1,3-丙二醇氧化还原酶同工酶的基因yqhD,将其连接到表达载体pEtac,得到重组载体pEtac-yqhD,重组载体在大肠杆菌JM109中得到高效表达。SDS_PAGE分析显示融合表达产物的分子量均为43 kD,同核酸序列测定所推导的值相符。对含有yqh-D的基因工程菌进行表达研究表明：37 ℃,以1.0 mmol /L IPTG诱导4 h,1,3-丙二醇氧化还原酶同工酶的酶活力达到120 u/mg蛋白,而对照菌株的酶活力为0.5 u/mg蛋白。再将含甘油脱水酶基因dhaB和含1,3-丙二醇氧化还原酶同工酶基因yqhD的重组质粒共转化大肠杆菌JM109得到重组大肠杆菌JM109（pUCtac-dhaB, pEtac-yqhD）,该菌株在好氧条件下,以1.0mmol/L IPTG诱导可将50 g/L甘油转化为38.0 g/L 1,3-丙二醇。首次发现1,3-丙二醇氧化还原酶同工酶在好氧条件下表现出较高的活性。     

1,3-Propanediol production by Escherichia coli expressing genes from the Klebsiella pneumoniae dha regulon.

The dha regulon in Klebsiella pneumoniae enables the organism to grow anaerobically on glycerol and produce 1,3-propanediol (1,3-PD). Escherichia coli, which does not have a dha system, is unable to grow anaerobically on glycerol without an exogenous electron acceptor and does not produce 1,3-PD. A genomic library of K. pneumoniae ATCC 25955 constructed in E. coli AG1 was enriched for the ability to grow anaerobically on glycerol and dihydroxyacetone and was screened for the production of 1,3-PD. The cosmid pTC1 (42.5 kb total with an 18.2-kb major insert) was isolated from a 1,3-PD-producing strain of E. coli and found to possess enzymatic activities associated with four genes of the dha regulon: glycerol dehydratase (dhaB), 1,3-PD oxidoreductase (dhaT), glycerol dehydrogenase (dhaD), and dihydroxyacetone kinase (dhaK). All four activities were inducible by the presence of glycerol. When E. coli AG1/pTC1 was grown on complex medium plus glycerol, the yield of 1,3-PD from glycerol was 0.46 mol/mol. The major fermentation by-products were formate, acetate, and D-lactate. 1,3-PD is an intermediate in organic synthesis and polymer production. The 1,3-PD fermentation provides a useful model system for studying the interaction of a biochemical pathway in a foreign host and for developing strategies for metabolic pathway engineering.     

1,3-Propanediol production by Escherichia coli expressing genes from the Klebsiella pneumoniae dha regulon.

The dha regulon in Klebsiella pneumoniae enables the organism to grow anaerobically on glycerol and produce 1,3-propanediol (1,3-PD). Escherichia coli, which does not have a dha system, is unable to grow anaerobically on glycerol without an exogenous electron acceptor and does not produce 1,3-PD. A genomic library of K. pneumoniae ATCC 25955 constructed in E. coli AG1 was enriched for the ability to grow anaerobically on glycerol and dihydroxyacetone and was screened for the production of 1,3-PD. The cosmid pTC1 (42.5 kb total with an 18.2-kb major insert) was isolated from a 1,3-PD-producing strain of E. coli and found to possess enzymatic activities associated with four genes of the dha regulon: glycerol dehydratase (dhaB), 1,3-PD oxidoreductase (dhaT), glycerol dehydrogenase (dhaD), and dihydroxyacetone kinase (dhaK). All four activities were inducible by the presence of glycerol. When E. coli AG1/pTC1 was grown on complex medium plus glycerol, the yield of 1,3-PD from glycerol was 0.46 mol/mol. The major fermentation by-products were formate, acetate, and D-lactate. 1,3-PD is an intermediate in organic synthesis and polymer production. The 1,3-PD fermentation provides a useful model system for studying the interaction of a biochemical pathway in a foreign host and for developing strategies for metabolic pathway engineering.     

产1,3-丙二醇基因工程菌发酵条件的研究

利用途径工程的方法,将来源于克雷伯氏菌(Klebsiella pneumoniae)的甘油脱水酶基因dhaB和1,3-丙二醇氧化还原酶基因dhaT构建成多顺反子重组质粒pSE-dhaB-dhaT并在大肠杆菌JM 109中进行表达,在大肠杆菌中构建一条新的产1,3-丙二醇代谢途径。研究表明,重组菌株JM 109/pSE-dhaB-dhaT在微好氧条件下,尝试用廉价的乳糖为诱导物、维生素B12为辅酶,可以将甘油转化为1,3-丙二醇,产量达15.34 g/L,甘油转化率为35.7%,对低成本生产1,3-丙二醇作了有益的探索。     

甲酸脱氢酶在Klebsiella pneumoniae中的表达和功能分析

在甘油厌氧发酵生产1,3-丙二醇的过程中,需要消耗还原当量NADH,NADH的有效供给决定了1,3-丙二醇的产量和得率。采用PCR方法从Candidaboidinii基因组中克隆编码甲酸脱氢酶基因fdh,将fdh基因片段插入载体pMALTM-p2X中,构建表达载体pMALTM-p2X-fdh,并转入1,3-丙二醇生产菌Klebsiella pneumoniae YMU2,获得重组菌Klebsiella pneumoniae F-1。研究了重组质粒的稳定性和IPTG诱导fdh基因过量表达的条件。结果表明,重组质粒具有良好的稳定性;fdh基因表达的蛋白分子量为40.2kDa;IPTG诱导表达研究表明,在IPTG浓度为0.5mmol/L时,诱导4h后甲酸脱氢酶表达明显;发酵过程中甲酸脱氢酶比酶活达到5.47U/mg;与出发菌株K.pneumoniae YMU2相比,重组菌F-1合成1,3-丙二醇的浓度提高了12.5%。