Characterization and optimization of extracellular alkaline lipase production by Alcaligenes sp. Using stearic acid as carbon source

The aim of this study was to improve the production of an extracellular alkaline lipase from Alcaligenes sp. (ATCC 31371) by optimization of the culture medium, for economic production of biodiesel from waste vegetable oil. A number of carbon sources including different types of starch, sugar, sugar alcohol, organic acids, and surfactants were investigated. Polyoxyethylene (20) sorbitan tristearate, whose side chain is stearic acid, was the most effective carbon source for lipase production. Box-Behnken experimental design was used for three factors (soy protein, sodium nitrate, and stearic acid) and the optimal composition for maximum lipase production (1.7-fold enhancement) was established as soy protein 4.07%, sodium nitrate 0.17%, and stearic acid 0.28% at 28°C with an agitation rate of 220 rpm for 24 h. The enzyme was purified to homogeneity and the recovery of the lipase activity was 7.8% with a 30-fold purification. The estimated molecular size of the protein determined by SDS-PAGE was 33 kDa. The optimum pH and temperature of the purified lipase was 8.5 and 40°C, respectively. The purified enzyme was stable in the pH range of 6.0 and 9.5 and in the temperature range of 20 and 50°C.     

Inhibition of hepatic lipase by m-aminophenylboronate application of phenylboronate affinity chromatography for purification of human postheparin plasma lipases

Phenylboronates are competitive inhibitors of serine hydrolases including lipases. We studied the effect of m-aminophenylboronate on triglyceride-hydrolyzing activity of hepatic lipase (EC 3.1.1.3). m-Aminophenylbo ronate inhibited hepatic lipase activity with a K₁ value of 55 μM. Furthermore, m-aminophenylboronate protected hepatic lipase activity from inhibition by di-isopropyl fluorophosphate, an irreversible active site inhibitor of serine hydrolases. Inhibition of hepatic lipase activity by m-aminophenylboronate was pH-dependent. The inhibition was maximal at pH 7.5, while at pH 10 it was almost non-existent. These data were used to develop a purification procedure for postheparin plasma hepatic lipase and lipoprotein lipase. The method is a combination of m-aminophenylboronate and heparin-Sepharose affinity chromatographies. Hepatic lipase was purified to homogeneity as analyzed on sodium dodecyl sulfate polyacrylamide gel electrophoresis. The specific activity of purified hepatic lipase was 5.46 mmol free fatty acids h⁻¹ mg⁻¹ protein with a total purification factor of 14 400 and a final recovery of approximately 20%. The recovery of hepatic lipase activity in m-aminophenylboronate affinity chromatography step was 95%. The purified lipoprotein lipase was a homogeneous protein with a specific activity of 8.27 mmol free fatty acids h⁻¹ mg⁻¹ The purification factor was 23 400 and the final recovery approximately 20%. The recovery of lipoprotein lipase activity in the m-aminophenylboronate affinity chromatography step was 87%. The phenylboronate affinity chromatography step can be used for purification of serine hydrolases which interact with boronates.     

Physicochemical Properties of Niigata Waxy Rices

The crude lipase powder has been purified 216-fold in specific activity by means of pH adjustment, DEAE-Cellu1ose, DEAE-Sephadex A-50, CM-Sephadex C-50 and Sephadex G-200 column chromatography and the recovery of the activity was 30%. The purified lipase was confirmed to be homogeneous with disc electrophoresis and ultracentrifugal analyses. The purified lipase was stable in the pH range from 7.0 to 10.0. Optimal pH for the lipolysis of polyvinyl alcohol-emulsified olive oil at 45°C was 8.0 and optimal temperature was 60°C. The purified lipase was stable up to 60°C and retained 55% of full activity after heating at 70°C for 20 min.     

Selective separation and purification of two lipases from chromobacterium viscosum using AOT reversed micelles

Selective separation and purification of two lipases form Chromobacterium viscosum were carried out by liquid-liquid extraction using a reversed micellar system. Optimum parameters for extraction were determined using a 250 mM AOT micellar solution in isooctane. Complete separation of the two lipases was achieved at pH 6.0 with a 50mM potassium phosphate buffer solution containing 50 mM KCI. By adding 2.5% by volume of ethanol to the lipase-loaded micellar solution, 85% of the extracted lipase could be recovered in a new aqueous phase, 50 mM K(2)HPO(4) with 50 mM KCl, at pH 9.0. Lipase A was purified 2.6-fold with a recovery of 86%, and lipase B by 1.5-fold with a recovery of 76%.     

Purification and characterization of two distinct lipases from Geotrichum candidum

Lipase, an enzyme that hydrolyzes triacylglycerol, has been purified and characterized. The purification procedure includes ethanol precipitation and chromatographies on Sephacryl-200 HR, high resolution anion-exchange (mono Q) and Polybuffer exchanger 94. With this procedure, two forms of lipases from Geotrichum candidum were obtained. Lipase I (main enzyme) and lipase II (minor enzyme) were purified 35-fold with a 62% recovery in activity and 94-fold with a 18% recovery in activity, respectively. Their molecular weights have been estimated by polyacrylamide gel electrophoresis under denaturing conditions and by molecular sieving under native conditions at 56,000. Lipase I and II had optimum pH values of 6.0 and 6.8 and isoelectric points of 4.56 and 4.46, respectively. The enzymes are stable at a pH range of 6.0 to 8.0. Monovalent ions had little effect on both enzyme activities, while divalent ions at concentrations above 50 mM inhibited the lipase activities in a concentration-dependent manner. Sodium dodecyl sulfate at a concentration lower than 10 mM completely inhibited the lipase activity.     

A novel organic solvent tolerant lipase from Bacillus sphaericus 205y: extracellular expression of a novel OST-lipase gene

An organic solvent tolerant (OST) lipase gene from Bacillus sphaericus 205y was successfully expressed extracellularly. The expressed lipase was purified using two steps purification; ultrafiltration and hydrophobic interaction chromatography (HIC) to 8-fold purity and 32% recovery. The purified 205y lipase revealed homogeneity on denaturing gel electrophoresis and the molecular mass was at approximately 30 kDa. The optimum pH for the purified 205y lipase was 7.0-8.0 and its stability showed a broad range of pH value between pH 5.0 to 13.0 at 37 degrees C. The purified 205y lipase exhibited an optimum temperature of 55 degrees C. The activity of the purified lipase was stimulated in the presence of Ca2+ and Mg2+. Ethylenediaminetetraacetic acid (EDTA) has no effect on its activity; however inhibition was observed with phenylmethane sulfonoyl fluoride (PMSF) a serine hydrolase inhibitor. Organic solvents such as dimethylsulfoxide (DMSO), methanol, p-xylene and n-decane enhanced the activity. Studies on the effect of oil showed that the lipase was most active in the presence of tricaprin (C10). The lipase exhibited 1,3 positional specificity. Keywords: Bacter     

Purification of lipase from Cunninghamella verticillata by stepwise precipitation and optimized conditions for crystallization

Lipase from the oil-mill waste isolate Cunninghamella verticillata was purified by stepwise precipitation using acetone, as a sequel to our earlier conventional column chromatographic method [Gopinath et al. (2002)World Journal of Microbiology and Biotechnology 18, 449–458]. The yield of purified lipase was approx. 4-fold higher than by the previous method and the purified lipase was obtained with 70–80% acetone saturations. The enzyme was resolved as a single band with homogeneity both by native and by SDS–PAGE. The optimum condition for the lipase to crystallize was 5 g of enzyme in 0.05 M sodium phosphate buffer (pH 6.5) with 5 mM FeCl₂ and 10% 2-methyl 2,4-pentanediol (MPD).These authors equally contributed to this work     

Purification and characterization of a lipase from Staphylococcus aureus

An extracellular lipase from Staphylococcus aureus (strain FN 37) was purified to homogeneity. A cell-free culture broth was subjected to ammonium sulphate precipitation, and the lipase was isolated from the resuspended pellet by adsorption chromatography on octyl-Sepharose. The purification was 957-fold, and the recovery of the octyl-Sepharose chromatography was about 100%. The specific activity of the purified lipase was 546 mU of lipase activity per micrograms protein. The purity of the final product was documented by SDS-polyacrylamide gel electrophoresis in which a homogeneous protein band of 43 kDa was found. In gel chromatography on Sephadex G-200 the lipase eluted as a homogeneous peak with an apparent molecular mass of 110 kDa, suggesting that the lipase may exist as an oligomer in physiological media. Analysis of the amino-acid composition revealed a predominance of polar, non-charged amino acids, with serine accounting for 24 mol% of the amino-acid residues.     

Purification of lipase derived from Burkholderia pseudomallei with alcohol/salt-based aqueous two-phase systems

Alcohol/salt-based aqueous two-phase systems (ATPSs) were used to recover lipase derived from Burkholderia pseudomallei (B. pseudomallei). Nine biphasic systems, comprised of an alcohol-based top phase (ethanol, 2-propanol and 1-propanol) and a salt-based bottom phase (ammonium sulfate, potassium phosphate and sodium citrate), were evaluated for their effectiveness in lipase recovery. The stability of lipase in each of the solutions was tested, and phase diagrams were constructed for each system. The optimum partition efficiency for the purification of lipase was obtained in an ATPS of 16% (w/w) 2-propanol and 16% (w/w) phosphate in the presence of 4.5% (w/v) NaCl. The purified lipase had a purification factor of 13.5 and a yield of 99%.     

Lipase from Candida paralipolytica

The lipase from Candida paralipolytica was purified, as judged by disc electrophoresis. The purification was about 132 fold, based on protein, with a recovery of 32% from the acetone precipitate of the cultivated broth.

After purification, modification of the enzyme was performed by dialyzing its solution against 1 m sodium chloride in acetate buffer at room temperature and by separating the modified enzyme from an unknown substance(s) with a Sephadex G–75 column.

The optimum pH for lipolysis of the purified lipase was 8.0, while that of the modified one was 7.0. Sodium taurocholate was required essentially by the purified enzyme, but not by the modified one. The purified lipase was stable below 37°C and in the pH range from 3.5 to 9.0 at 5°C.     

Purification,characterization and thermostability of lipase from a thermophilic Bacillus sp. J33

A thermostable lipase produced by a thermophilic Bacillus sp. J33 was purified to 175-fold with 15.6% recovery by ammonium sulphate and Phenyl Sepharose column chromatography. The enzyme is a monomeric protein having molecular weight of 45 kDa. It hydrolyzes triolein at all positions. The fatty acid specificity of lipase is broad with little preference for C12 and C4. The K_m and V_max for lipase with pNP-laurate as substrate was calculated to be 2.5 mM and 0.4 M min^-1 ml^-1 respectively. The immobilized enzyme was stable for 12 h at 60°C. Polyhydric alcohols such as ethylene glycol (2.5 M), sorbitol (2.5 M) and glycerol (2.5 M) were used as thermostabilizers. Lipase acquired a remarkable stability, since no deactivation occurred at 70°C for 150 min in the presence of additives.     

Lipase purification by affinity precipitation with a thermo-responsive polymer immobilized Cibacron Blue F3GA ligand

A thermo-responsive polymer (P_NNB) was synthesized with lower critical solution temperature 27.5°C and over 95% recovery. The adsorption of porcine pancreatic lipase on Cibacron Blue F3GA-conjugated P_NNB (P_NNB-CB) closely followed the bi-Langmuir adsorption isotherm. The maximum adsorption capacity was found at pH 5.0, with a ligand density of 18.4 μmol/g polymers. The optimized eluent was a 0.01 M phosphate buffer solution at pH 8.0 containing 20% ethylene glycol. Six adsorptiondesorption recycles indicated excellent reusability of the affinity adsorbent. P_NNB-CB was applied to separate porcine pancreatic lipase from its crude material giving a lipase activity recovery of 81.6% with a 16-fold purification factor. Lipase could be purified to single-band purity, according to gel electrophoresis. The purification strategy is therefore feasible and efficient for purifying proteins of interest.     

Purification and properties of Amycolatopsis mediterranei DSM 43304 lipase and its potential in flavour ester synthesis

An extracellular thermostable lipase from Amycolatopsis mediterranei DSM 43304 has been purified to homogeneity using ammonium sulphate precipitation followed by anion exchange chromatography and hydrophobic interaction chromatography. This protocol resulted in a 398-fold purification with 36% final recovery. The purified A. mediterranei DSM 43304 lipase (AML) has an apparent molecular mass of 33 kDa. The N-terminal sequence, AANPYERGPDPTTASIEATR, showed highest similarity to a lipase from Streptomyces exfoliatus. The values of K(m)(app) and V(max)(app) for p-nitrophenyl palmitate (p-NPP) at the optimal temperature (60°C) and pH (8.0) were 0.099±0.010 mM and 2.53±0.06 mmol/min mg, respectively. The purified AML displayed significant activity towards a range of short and long chain triglyceride substrates and p-nitrophenyl esters. Hydrolysis of glycerol ester bonds occurred non-specifically. The purified AML displayed significant stability in the presence of organic solvents (40%, v/v) and catalyzed the synthesis of the flavour ester isoamyl acetate in free and immobilized states.     

Extracellular lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NRRL3; production,partial purification and properties

Four strains of Aspergillus niger were screened for lipase production. Each was cultivated on four different media differing in their contents of mineral components and sources of carbon and nitrogen. Aspergillus niger NRRL3 produced maximal activity (325U/ml) when grown in 3% peptone, 0.05% MgSO₄.7H₂O, 0.05% KCl, 0.2% K₂HPO₄ and 1% olive oil:glucose (0.5:0.5). A. niger NRRL3 lipase was partially purified by ammonium sulphate precipitation. The majority of lipase activity (48%) was located in fraction IV precipitated at 50–60% of saturation with a 18-fold enzyme purification. The optimal pH of the partial purified lipase preparation for the hydrolysis of emulsified olive oil was 7.2 and the optimum temperature was 60°C. At 70°C, the enzyme retained more than 90% of its activity. Enzyme activity was inhibited by Hg²⁺ and K⁺, whereas Ca²⁺ and Mn²⁺ greatly stimulated its activity. Additionally, the formed lipase was stored for one month without any loss in the activity.     

Lytic enzyme complex of an antagonistic Bacillus sp. X-b: isolation and purification of components

Bacillus sp. X-b, a biocontrol agent against certain plant pathogenic fungi, secretes a complex of hydrolytic enzymes, composed of chitinase, chitosanase, laminarinase, lipase and protease. Homogenized mycelium of basidiomycete Macrolepiota procera induced activities of these enzymes more effectively than colloidal chitin or partially purified cell walls of another basidiomycete Polyporus squamosus. Subjected to a multi-step purification, the specific activity of chitinase increased 36-fold, chitosanase 69-fold, lipase 44-fold and laminarinase 15-fold. Partially purified chitinase showed two major bands with molecular masses of 46 000 and 35 000 on sodium dodecyl sulfate–polyacrylamide gel electrophoresis while chitosanase and lipase appeared as single bands with molecular masses of 27 000 and 62 000, respectively.     

Observations of sporulation in Fonsecaea and Phialophora by scanning electron microscopy

An extracellular lipase produced by Thermomyces lanuginosus in palm fruit chaff infusion broth at 45 °C after 6 days of incubation was purified by a combination of ultrafiltration, ethanol precipitation and fractionation on DEAE-cellulose and gel-filtration on Sephadex G.200. A single peak of lipase activity with a tenfold increase in the activity of the enzyme was obtained. The partially purified T. lanuginosus lipase had a recovery value of 25%. Attempts to purify this enzyme further led to an almost complete loss of activity. The lipase had a pH optimum of 6.5 and peak activity at 40 °C. It readily hydrolysed both natural and synthetic triglycerides at 40 °C with optimal activities recorded on palm oil and triolein respectively.     

Concentrates of DHA from fish oil by selective esterification of cholesterol by immobilized isoforms of lipase from Candida rugosa

Two lipases (Lip A and Lip B), were purified from a commercial lipase preparation produced by Candida rugosa and partially characterized. The purified lipases were immobilized on Duolite A 568 and used in the selective esterification of cholesterol with free fatty acids from sardine fish oil. The results showed that Lip A and Lip B preferentially esterified saturated and monounsaturated fatty acids allowing a 3.4-fold (Lip B, 24 h) and 4-fold (Lip A, 10 h) enrichment of docosahexaenoic acid in the remaining free fatty acid fraction. Selectivity towards eicosapentaenoic acid was less pronounced. By this selective esterification docosahexaenoic acid was concentrated from 7.4 to 32% with a recovery of 95% of its initial content in sardine fish oil.     

Purification and properties of thermostable lipase from a thermophilic Bacillus stearothermophilus MC 7

Extracellular thermostable lipase produced by the thermophilic Bacillus stearothermophilus MC 7 was purified to 19.25-fold with 10.2% recovery. The molecular weight of the purified enzyme determined by sodium dodecyl sulfate-polyacrylamide gel electrophoresis (SDS-PAGE) was shown to be 62 500 Da. The purified enzyme expressed maximum activity at 75–80 °C and its half life was 30 min at 70 °C. The K_m and V_max were calculated to be, respectively, 0.33 mM and 188 μM min⁻¹ mg⁻¹ with p-nitrophenyl palmitate (pNPP) as a substrate. Enzyme activity was inhibited by divalent ions of heavy metals, thiol and serine inhibitors, whereas calcium ion stimulated its activity. The most advantageous method for immobilization was found to be ionic binding to DEAE Cellulose. The enzyme was able to hydrolyze both soluble and insoluble emulsified substrates and was classified as a lipase, expressing some esterase activity as well.     

Production and purification of lipase by a mutant strain ofRhizopus arrhizus

Extracellular lipase production byRhizopus arrhizus was increased by mutant selection from 130 to 670 μmol FFA per mL per min using UV radiation and aziridine treatment. The produced lipase was purified 720-fold by ammonium sulfate fractionation and Sephadex G-100 gel filtration. The molar mass of the produced lipase was determined to be approximately 67 kDa which comigrated with bovine serum albumin in both a Sephadex G-100 column and SDS-PAGE.     

Secretory expression and characterization of a highly Ca-activated thermostable L2 lipase

Thermostable lipases are important biocatalysts, showing many interesting properties with industrial applications. Previously, a thermophilic Bacillus sp. strain L2 that produces a thermostable lipase was isolated. In this study, the gene encoding for mature thermostable L2 lipase was cloned into a Pichia pastoris expression vector. Under the control of the methanol-inducible alcohol oxidase (AOX) promoter, the recombinant L2 lipase was secreted into the culture medium driven by the Saccharomyces cerevisiae α-factor signal sequence. After optimization the maximum recombinant lipase activity achieved in shake flasks was 125 U/ml. The recombinant 44.5 kDa L2 lipase was purified 1.8-fold using affinity chromatography with 63.2% yield and a specific activity of 458.1 U/mg. Its activity was maximal at 70 °C and pH 8.0. Lipase activity increased 5-fold in the presence of Ca²⁺. L2 lipase showed a preference for medium to long chain triacylglycerols (C₁₀–C₁₆), corn oil, olive oil, soybean oil, and palm oil. Stabilization at high temperature and alkaline pH as well as its broad substrate specificity offer great potential for application in various industries that require high temperature operations.