Oxidative folding of human lysozyme: effects of the loss of two disulfide bonds and the introduction of a calcium-binding site

Mutant human lysozymes (HLZ) lacking two disulfide bonds were constructed to study the importance of each disulfide bond on oxidative refolding. To avoid destabilization, a calcium-binding site was introduced. Five of the six species of two-disulfide mutants could be obtained with enzymatic activity. Based on the information obtained from refolding and unfolding experiments, the order of importance in oxidative refolding was found to be as follows: SS2(Cys30-Cys116) > SS1(Cys6-Cys128) SS3(Cys65-Cys81) > SS4(Cys77-Cys95). Without SS2, these mutants refolded with low efficiency or did not refold at all. The bond SS2 is located in the interface of B-and D-helices, and a small hydrophobic cluster is formed near SS2. This cluster may play an important role in the folding process and stabilization, and SS2 may act as a stabilizer through its polypeptide linkage. The bond SS2 is the most important disulfide bond for oxidative folding of lysozymes.     

Direct identification of disulfide bond linkages in human insulin-like growth factor I (IGF-I) by chemical synthesis

The primary structure of human IGF-I, except for the disulfide bond system, has been reported by Rinderknecht and Humbel. IGF-I afforded the corresponding characteristic peptide fragment on V8 protease digestion, which contained Cys6, Cys47, Cys48, and Cys52. Two possible fragments, Type I with Cys6-Cys47 and Cys48-Cys52, and Type II with Cys6-Cys48 and Cys47-Cys52, were synthesized. The disulfide bond system of IGF-I was unequivocally determined to be the Type II form along with Cys18-Cys61. Interestingly, the Type I system was included in the disulfide bond isomer produced as the main by-product in the refolding step on IGF-I synthesis by the recombinant DNA method.     

Disulfide isoforms of recombinant glia maturation factor beta

Recombinant human glia maturation factor beta (r-hGMF-beta) is a single-chain polypeptide (141 amino acid residues) containing three cysteines, at positions 7, 86 and 95. Nascent r-hGMF-beta exists in the reduced state and has no biological activity. The protein can be activated through oxidative refolding by incubation with a mixture of reduced and oxidized glutathione. Reverse-phase HPLC analysis of the refolded r-hGMF-beta shows the presence of four peaks, corresponding to the reduced form plus three newly generated intrachain disulfide-containing isoforms predicted from the number of cysteine residues. Only one isoform shows biological activity when tested for growth suppression on C6 glioma cells. We infer from the HPLC elution pattern that the active form contains the disulfide bridge Cys86-Cys95.     

Contribution of the 6-120 disulfide bond of alpha-lactalbumin to the stabilities of its native and molten globule states.

The unfolding and refolding of a derivative of alpha-lactalbumin, in which the disulfide bond between Cys6 and Cys120 is selectively reduced and S-carboxymethylated, are investigated by equilibrium and kinetic circular dichroism measurements. The native conformation of this derivative is known to be essentially identical to that of intact alpha-lactalbumin. The equilibrium unfolding of the derivative involves a stable intermediate, which is also similar to the molten globule state of the disulfide intact protein. The results of stopped-flow circular dichroism experiments show that the same intermediate is formed rapidly as a transient intermediate in kinetic refolding. The conformational stabilities for the native and intermediate states have been estimated and compared with the stabilities for the corresponding states of intact alpha-lactalbumin. The stabilization of the native state by the disulfide has been interpreted in terms of a decrease in chain entropy in the unfolded state and elimination of the strain imposed on the disulfide bond in the native state. The molten globule state is also stabilized by the disulfide bond, although the degree of stabilization of the molten globule state is smaller than of the native state. The results suggest that, in the molten globule state, some ordered structures are present within the loop moiety formed by the 6-120 disulfide.     

Contribution of disulfide bonds to the conformational stability and catalytic activity of ribonuclease A.

Disulfide bonds between the side chains of cysteine residues are the only common crosslinks in proteins. Bovine pancreatic ribonuclease A (RNase A) is a 124-residue enzyme that contains four interweaving disulfide bonds (Cys26-Cys84, Cys40-Cys95, Cys58-Cys110, and Cys65-Cys72) and catalyzes the cleavage of RNA. The contribution of each disulfide bond to the conformational stability and catalytic activity of RNase A has been determined by using variants in which each cystine is replaced independently with a pair of alanine residues. Thermal unfolding experiments monitored by ultraviolet spectroscopy and differential scanning calorimetry reveal that wild-type RNase A and each disulfide variant unfold in a two-state process and that each disulfide bond contributes substantially to conformational stability. The two terminal disulfide bonds in the amino-acid sequence (Cys26-Cys84 and Cys58-Cys110) enhance stability more than do the two embedded ones (Cys40-Cys95 and Cys65-Cys72). Removing either one of the terminal disulfide bonds liberates a similar number of residues and has a similar effect on conformational stability, decreasing the midpoint of the thermal transition by almost 40 degrees C. The disulfide variants catalyze the cleavage of poly(cytidylic acid) with values of kcat/Km that are 2- to 40-fold less than that of wild-type RNase A. The two embedded disulfide bonds, which are least important to conformational stability, are most important to catalytic activity. These embedded disulfide bonds likely contribute to the proper alignment of residues (such as Lys41 and Lys66) that are necessary for efficient catalysis of RNA cleavage.     

Mechanism of the electron transfer catalyst DsbB from Escherichia coli

The membrane protein DsbB from Escherichia coli is essential for disulfide bond formation and catalyses the oxidation of the periplasmic dithiol oxidase DsbA by ubiquinone. DsbB contains two catalytic disulfide bonds, Cys41-Cys44 and Cys104-Cys130. We show that DsbB directly oxidizes one molar equivalent of DsbA in the absence of ubiquinone via disulfide exchange with the 104-130 disulfide bond, with a rate constant of 2.7 x 10 M(-1) x s(-1). This reaction occurs although the 104-130 disulfide is less oxidizing than the catalytic disulfide bond of DsbA (E(o)' = -186 and -122 mV, respectively). This is because the 41-44 disulfide, which is only accessible to ubiquinone but not to DsbA, is the most oxidizing disulfide bond in a protein described so far, with a redox potential of -69 mV. Rapid intramolecular disulfide exchange in partially reduced DsbB converts the enzyme into a state in which Cys41 and Cys44 are reduced and thus accessible for reoxidation by ubiquinone. This demonstrates that the high catalytic efficiency of DsbB results from the extreme intrinsic oxidative force of the enzyme.     

Structural stability of human alpha-thrombin studied by disulfide reduction and scrambling

Human alpha-thrombin is a very important plasma serine protease, which is involved in physiologically vital processes like hemostasis, thrombosis, and activation of platelets. Knowledge regarding the structural stability of alpha-thrombin is essential for understanding its biological regulation. Here, we investigated the structural and conformational stability of alpha-thrombin using the techniques of disulfide reduction and disulfide scrambling. alpha-Thrombin is composed of a light A-chain (36 residues) and a heavy B-chain (259 residues) linked covalently by an inter-chain disulfide bond (Cys(1)-Cys(122)). The B-chain is stabilized by three intra-chain disulfide bonds (Cys(42)-Cys(58), Cys(168)-Cys(182), and Cys(191)-Cys(220)) (Chymotrypsinogen nomenclature). Upon reduction with dithiothreitol (DTT), alpha-thrombin unfolded in a 'sequential' manner with sequential reduction of Cys(168)-Cys(182) within the B-chain followed by the inter-chain disulfide, generating two distinct partially reduced intermediates, I-1 and I-2, respectively. Conformational stability of alpha-thrombin was investigated by the technique of disulfide scrambling. alpha-Thrombin denatures by scrambling its native disulfide bonds in the presence of denaturant [urea, guanidine hydrochloride (GdmCl) or guanidine thiocyanate (GdmSCN)] and a thiol initiator. During the process, cleavage of the inter-chain disulfide bond and release of the A-chain from B-chain was the foremost event. The three disulfides in the B-chain subsequently scrambled to form three major isomers (designated as X-Ba, X-Bb, and X-Bc). Complete denaturation of alpha-thrombin was observed at low concentrations of denaturants (0.5 M GdmSCN, 1.5 M GdmCl, or 3 M urea) indicating low conformational stability of the protease.     

Mass spectrometric identification of N- and O-glycosylation sites of full-length rat selenoprotein P and determination of selenide-sulfide and disulfide linkages in the shortest isoform

Rat selenoprotein P is an extracellular glycoprotein of 366 amino acid residues that is rich in cysteine and selenocysteine. Plasma contains four isoforms that differ principally by length at the C-terminal end. Mass spectrometry was used to identify sites of glycosylation on the full-length protein. Of the potential N-glycosylation sites, three located at residues 64, 155, and 169 were occupied, while the two at residues 351 and 356 were not occupied. Threonine 346 was variably O-glycosylated. Thus, full-length selenoprotein P is both N- and O-glycosylated. The shortest isoform of selenoprotein P, which terminates at residue 244, was analyzed for selenide-sulfide and disulfide linkages. In this isoform, a single selenocysteine and seven cysteines are present. Mass spectrometric analysis indicated that a selenide-sulfide bond exists between Sec40 and Cys43. Two disulfides were also detected as Cys149-Cys167 and Cys153-Cys156. The finding of a selenide-sulfide bond in the shortest isoform is compatible with a redox function of this pair that might be analogous to the selenol-thiol pair near the C terminus of animal thioredoxin reductase. The disulfide formed by Cys153-Cys156 also has some characteristics of a redox active pair.     

Early intermediates in the PDI-assisted folding of ribonuclease A

The oxidative refolding of ribonuclease A has been investigated in several experimental conditions using a variety of redox systems. All these studies agree that the formation of disulfide bonds during the process occurs through a nonrandom mechanism with a preferential coupling of certain cysteine residues. We have previously demonstrated that in the presence of glutathione the refolding process occurs through the reiteration of two sequential reactions: a mixed disulfide with glutathione is produced first which evolves to form an intramolecular S-S bond. In the same experimental conditions, protein disulfide isomerase (PDI) was shown to catalyze formation and reduction of mixed disulfides with glutathione as well as formation of intramolecular S-S bonds. This paper reports the structural characterization of the one-disulfide intermediate population during the oxidative refolding of Ribonuclease A under the presence of PDI and glutathione with the aim of defining the role of the enzyme at the early stages of the reaction. The one-disulfide intermediate population occurring at the early stages of both the uncatalyzed and the PDI-catalyzed refolding was purified and structurally characterized by proteolytic digestion followed by MALDI-MS and LC/ESIMS analyses. In the uncatalyzed refolding, a total of 12 disulfide bonds out of the 28 theoretical possible cysteine couplings was observed, confirming a nonrandom distribution of native and nonnative disulfide bonds. Under the presence of PDI, only two additional nonnative disulfides were detected. Semiquantitative LC/ESIMS analysis of the distribution of the S-S bridged peptides showed that the most abundant species were equally populated in both the uncatalyzed and the catalyzed process. This paper shows the first structural characterization of the one-disulfide intermediate population formed transiently during the refolding of ribonuclease A in quasi-physiological conditions that mimic those present in the ER lumen. At the early stages of the process, three of the four native disulfides are detected, whereas the Cys26-Cys84 pairing is absent. Most of the nonnative disulfide bonds identified are formed by nearest-neighboring cysteines. The presence of PDI does not significantly alter the distribution of S-S bonds, suggesting that the ensemble of single-disulfide species is formed under thermodynamic control.     

Refolding mechanism of ovalbumin: investigation by using a starting urea-denatured disulfide isomer with mispaired CYS367-CYS382

Ovalbumin, a member of the serpin superfamily, contains one cystine disulfide (Cys73-Cys120) and four cysteine sulfhydryls (Cys11, Cys30, Cys367, and Cys382) in the native state. To investigate the folding mechanism of ovalbumin, a urea-denatured disulfide isomer with a mispaired disulfide Cys367-Cys382 (D[367-382]) and its derivative (D[367-382/CM-73]) in which a native cystine counterpart of Cys73 is blocked by carboxymethylation were produced. Both the denatured isomers refolded within an instrumental dead time of 4 ms into an initial burst intermediate IN with partially folded conformation. After the initial burst phase, most of the D[367-382] molecules further refolded into the native form. In contrast, upon dilution of D[367-382/CM-73] with the refolding buffer, the protein stayed in the IN state as a stable form, which displayed a partial regain of the native secondary structure and a compact conformation with a similar Stokes radius to the native form. The structural characteristics of IN were clearly differentiated from those of an equilibrium intermediate IA that was produced by dilution with an acidic buffer of urea-denatured ovalbumin; IA showed much more hydrophobic dye binding and a larger Stokes radius than the IN state, despite their indistinguishable far-UV circular dichroic spectra. The non-productive nature of IA highlighted the importance of a compact conformation of the IN state for subsequent native refolding. These observations were consistent with a refolding model of ovalbumin that includes the regain of the partial secondary structure and of the compactness of overall conformation in an initial burst phase before the subsequent native refolding.     

Functional structure of the somatomedin B domain of vitronectin

The N-terminal somatomedin B domain (SMB) of vitronectin binds PAI-1 and the urokinase receptor with high affinity and regulates tumor cell adhesion and migration. We have shown previously in the crystal structure of the PAI-1/SMB complex that SMB, a peptide of 51 residues, is folded as a compact cysteine knot of four pairs of crossed disulfide bonds. However, the physiological significance of this structure was questioned by other groups, who disputed the disulfide bonding shown in the crystal structure (Cys5-Cys21, Cys9-Cys39, Cys19-Cys32, Cys25-Cys31), notably claiming that the first disulfide is Cys5-Cys9 rather than the Cys5-Cys21 bonding shown in the structure. To test if the claimed Cys5-Cys9 bond does exist in the SMB domain of plasma vitronectin, we purified mouse and rat plasma vitronectin that have a Met (hence cleavable by cyanogen bromide) at residue 14, and also prepared recombinant human SMB variants from insect cells with residues Asn14 or Leu24 mutated to Met. HPLC and mass spectrometry analysis showed that, after cyanogen bromide digestion, all the fragments of the SMB derived from mouse or rat vitronectin or the recombinant SMB mutants are still linked together by disulfides, and the N-terminal peptide (residue 1-14 or 1-24) can only be released when the disulfide bonds are broken. This clearly demonstrates that Cys5 and Cys9 of SMB do not form a disulfide bond in vivo, and together with other structural evidence confirms that the only functional structure of the SMB domain of plasma vitronectin is that seen in its crystallographic complex with PAI-1.     

Respiratory chain strongly oxidizes the CXXC motif of DsbB in the Escherichia coli disulfide bond formation pathway

Escherichia coli DsbB has four essential cysteine residues, among which Cys41 and Cys44 form a CXXC redox active site motif and the Cys104-Cys130 disulfide bond oxidizes the active site cysteines of DsbA, the disulfide bond formation factor in the periplasm. Functional respiratory chain is required for the cell to keep DsbA oxidized. In this study, we characterized the roles of essential cysteines of DsbB in the coupling with the respiratory chain. Cys104 was found to form the inactive complex with DsbA under respiration-defective conditions. While DsbB, under normal aerobic conditions, is in the oxidized state, having two intramolecular disulfide bonds, oxidation of Cys104 and Cys130 requires the presence of Cys41-Cys44. Remarkably, the Cys41-Cys44 disulfide bond is refractory to reduction by a high concentration of dithiothreitol, unless the membrane is solubilized with a detergent. This reductant resistance requires both the respiratory function and oxygen, since Cys41-Cys44 became sensitive to the reducing agent when membrane was prepared from quinone- or heme-depleted cells or when a membrane sample was deaerated. Thus, the Cys41-Val-Leu-Cys44 motif of DsbB is kept both strongly oxidized and strongly oxidizing when DsbB is integrated into the membrane with the normal set of respiratory components.     

Identification of the disulfide bonds in human plasma protein SP-40,40 (apolipoprotein-J).

SP-40,40, a human plasma protein, is a modulator of the membrane attack complex formation of the complement system as well as a subcomponent of high-density lipoproteins. In the present study, the positions of the disulfide bonds in SP-40,40 were determined. SP-40,40 was purified from human seminal plasma by affinity chromatography using an anti-SP-40,40 monoclonal antibody and reversed-phase, high-performance liquid chromatography (HPLC). The protein was digested with trypsin and the fragments were separated by reversed-phase HPLC. The peptides containing disulfide bonds were fluorophotometrically detected with 4-(aminosulfonyl)-7-fluoro-2,1,3-benzoxadiazole (ABD-F). The peptides containing more than two disulfide bonds were further digested with Staphylococcus aureus V8 protease and lysylendopeptidase, and the fragments were isolated by HPLC. The amino acid compositions and the amino acid sequences of the peptides containing only a disulfide bond were determined. Disulfide bonds thus determined were between Cys58(alpha)-Cys107(beta), Cys68(alpha)-Cys99(beta), Cys75(alpha)-Cys94(beta), and Cys86(alpha)-Cys80(beta). Since there was no free sulfhydryl groups in the SP-40,40 molecule, Cys78(alpha) and Cys91(beta) should also be linked by a disulfide bond. It is notable that all of the disulfide bonds in SP-40,40 are not only formed by inter-chain pairing, but also appear to form an antiparallel ladder-like structure between the two chains. The unique structure could be related to the functions of SP-40,40.     

One-Way Allosteric Communication between the Two Disulfide Bonds in Tissue Factor

Tissue factor (TF) is a transmembrane glycoprotein that plays distinct roles in the initiation of extrinsic coagulation cascade and thrombosis. TF contains two disulfide bonds, one each in the N-terminal and C-terminal extracellular domains. The C-domain disulfide, Cys186-Cys209, has a ?RHStaple configuration in crystal structures, suggesting that this disulfide carries high pre-stress. The redox state of this disulfide has been proposed to regulate TF encryption/decryption. Ablating the N-domain Cys49-Cys57 disulfide bond was found to increase the redox potential of the Cys186-Cys209 bond, implying an allosteric communication between the domains. Using molecular dynamics simulations, we observed that the Cys186-Cys209 disulfide bond retained the ?RHStaple configuration, whereas the Cys49-Cys57 disulfide bond fluctuated widely. The Cys186-Cys209 bond featured the typical ?RHStaple disulfide properties, such as a longer S-S bond length, larger C-S-S angles, and higher bonded prestress, in comparison to the Cys49-Cys57 bond. Force distribution analysis was used to sense the subtle structural changes upon ablating the disulfide bonds, and allowed us to identify a one-way allosteric communication mechanism from the N-terminal to the C-terminal domain. We propose a force propagation pathway using a shortest-pathway algorithm, which we suggest is a useful method for searching allosteric signal transduction pathways in proteins. As a possible explanation for the pathway being one-way, we identified a pronounced lower degree of conformational fluctuation, or effectively higher stiffness, in the N-terminal domain. Thus, the changes of the rigid domain (N-terminal domain) can induce mechanical force propagation to the soft domain (C-terminal domain), but not vice versa.     

Crystal structures of subtilisin BPN' variants containing disulfide bonds and cavities: concerted structural rearrangements induced by mutagenesis

The X-ray structures of four genetically engineered disulfide variants of subtilisin have been analyzed to determine the energetic and structural constraints involved in inserting disulfide bonds into proteins. Each of the engineered disulfides exhibited atypical sets of dihedral angles compared with known structures of natural disulfide bridges in proteins and affected its local structural environment to a different extent. The disulfides located in buried regions, Cys26-Cys232 and Cys29-Cys119, induced larger changes than did Cys24-Cys87 and Cys22-Cys87, which are located on the surface of the molecule. An analysis of the concerted changes in secondary structure units such as alpha-helices and beta-sheets indicated systematic long-range effects. The observed changes in the mutants were largely distributed asymmetrically around the inserted disulfides, reflecting different degrees of inherent flexibility of neighboring secondary structure types. The disulfide substitution in each variant molecule created some invaginations or cavities, causing a reorganization of the surrounding water structure. These changes are described, as well as the changes in side chain positions of groups that border the cavities.     

Function of disulflde bond Cys45-Cys50 of prochymosin

The conditions (temperature, time, pH) for solubilizing inclusion bodies of prochymosin mutant, Cys45Asp/Cys50Ser, are identical with those for the wild type. Moreover, they have similar oxidative refolding behavior. Under the same renaturation conditions both of them can undergo correct refolding leading to the formation of activable molecules. This is quite different from the mutant with deletion of Cys250-Cys283, indicating that Cys45-Cys50 contributes less to the correct refolding of prochymosin than Cys250- Cys283. However, deletion of Cys45-Cys50 results in a remarkable decrease of the thermostability of pseudochymosin, suggesting that this disulfide bond plays an important role in stabilizing enzyme conformation. The proteolytic (P) and milk-dotting (C) activities of the mutant of pseudochymosin, Cys45Asp/Cys50Ser, are lower than those of its wild counterpart. The C/P ratio of the former is onefold higher than that of the latter.     

Functional implication of disulfide bond, Cys250 -Cys283, in bovine chymosin.

The reduction, carboxymethylation and mercuration of disulfide bond, Cys250-Cys283, located on the surface of bovine chymosin molecule resulted in the loss of about 25% of enzyme activity, suggesting that Cys250-Cys283 is not intimately involved in catalytic mechanism. Cys250 and Cys283 were substituted with Asp. and Ser. by site- directed mutagenesis of the structural gene coding for bovine prochymosin B. All three mutants (C250D/C283S, C250D, C283S) failed to be activated to chymosin in acid, indicating that Cys250-Cys283 might have some contribution to the correct refolding of the unfolded prochymosin.     

The differential impact of disulfide bonds and N-linked glycosylation on the stability and function of CD14

Innate immunity is the first line defense against invading pathogens. During Gram-negative bacterial infection, the Toll-like receptor 4 and MD-2 complex recognize lipopolysaccharide present in the bacterial cell wall. This recognition can be enhanced 100-1000-fold by CD14. However, the beneficial role provided by CD14 becomes detrimental in the context of sepsis and septic shock. An understanding of how CD14 functions will therefore benefit treatments targeted at both immune suppression and immune enhancement. In the present study, we use site-directed mutagenesis to address the role of disulfide bonds and N-linked glycosylation on CD14. A differential impact is observed for the five disulfide bonds on CD14 folding, with the first two (Cys(6)-Cys(17) and Cys(15)-Cys(32)) being indispensable, the third and fourth (Cys(168)-Cys(198) and Cys(222)-Cys(253)) being important, and the last (Cys(287)-Cys(333)) being dispensable. A functional role is observed for the first disulfide bond because the C6A substitution severely reduces the ability of CD14 to confer lipopolysaccharide responsiveness to U373 cells. Two of the four predicted glycosylation sites, asparagines 132 and 263, are actually involved in N-linked glycosylation, resulting in heterogeneity in CD14 molecular weight. Furthermore, glycosylation at Asn(132) plays a role in CD14 trafficking and upstream and/or downstream ligand interactions. When mapped onto the crystal structure of mouse CD14, the first two disulfide bonds and Asn(132) are in close proximity to the initial beta strands of the leucine rich repeat domain. Thus, disulfide bonds and N-linked glycosylation in the initial beta sheets of the inner concave surface of CD14 are crucial for structure and function.     

Effect of an alternative disulfide bond on the structure, stability, and folding of human lysozyme

Human lysozyme has four disulfide bonds, one of which, Cys65-Cys81, is included in a long loop of the beta-domain. A cysteine-scanning mutagenesis in which the position of Cys65 was shifted within a continuous segment from positions 61 to 67, with fixed Cys81, has previously shown that only the mutant W64CC65A, which has a nonnative Cys64-Cys81 disulfide, can be correctly folded and secreted by yeast. Here, using the W64CC65A mutant, we investigated the effects of an alternative disulfide bond on the structure, stability, and folding of human lysozyme using circular dichroism (CD) and fluorescence spectroscopy combined with a stopped-flow technique. Although the mutant is expected to have a different main-chain structure from that of the wild-type protein around the loop region, far- and near-UV CD spectra show that the native state of the mutant has tightly packed side chains and secondary structure similar to that of the wild-type. Guanidine hydrochloride-induced equilibrium unfolding transition of the mutant is reversible, showing high stability and cooperativity of folding. In the kinetic folding reaction, both proteins accumulate a similar burst-phase intermediate having pronounced secondary structure within the dead time of the measurement and fold into the native structure by means of a similar folding mechanism. Both the kinetic refolding and unfolding reactions of the mutant protein are faster than those of the wild-type, but the increase in the unfolding rate is larger than that of the refolding rate. The Gibbs' free-energy diagrams obtained from the kinetic analysis suggest that the structure around the loop region in the beta-domain of human lysozyme is formed after the transition state of folding, and thus, the effect of the alternative disulfide bond on the structure, stability, and folding of human lysozyme appears mainly in the native state.     

Structural and functional significance of disulfide bonds in saxatilin,a 7.7 kDa disintegrin

Saxatilin is a 7.7 kDa disintegrin that belongs to a family of homologous protein found in several snake venoms. Six disulfide bond locations of the disintegrin were determined by enzymatic cleavage and matrix-assisted-laser-desorption-ionization time-of-flight mass spectrometry (MALDI-TOF). Functional implications of the disulfide bonds related to the biological activity of saxatilin were investigated with recombinant protein species produced by site-directed mutagenesis of saxatilin. Several lines of experimental evidence indicated that three disulfide bonds, Cys21-Cys35, Cys29-Cys59, and Cys47-Cys67, of the disintegrin are closely associated with its biological function such as its ability to block the binding of integrin GPIIb-IIIa and alpha(v)beta(3) with fibrinogen and extracellular matrix. Those disulfide linkages were also revealed to be important for maintaining the functional structure of the protein molecule. On the other hand, the disulfide bridges of Cys6-Cys15 and Cys8-Cys16 do not appear to be critical for the molecular structure and function of saxatilin.