Amylopectin molecular structure reflected in macromolecular organization of granular starch

For lintners with negligible amylose retrogradation, crystallinity related inversely to starch amylose content and, irrespective of starch source, incomplete removal of amorphous material was shown. The latter was more pronounced for B-type than for A-type starches. The two predominant lintner populations, with modal degrees of polymerization (DP) of 13-15 and 23-27, were best resolved for amylose-deficient and A-type starches. Results indicate a more specific hydrolysis of amorphous lamellae in such starches. Small-angle X-ray scattering showed a more intense 9-nm scattering peak for native amylose-deficient A-type starches than for their regular or B-type analogues. The experimental evidence indicates a lower contrasting density within the "crystalline" shells of the latter starches. A higher density in the amorphous lamellae, envisaged by the lamellar helical model, explains the relative acid resistance of linear amylopectin chains with DP > 20, observed in lintners of B-type starches. Because amylopectin chain length distributions were similar for regular and amylose-deficient starches of the same crystal type, we deduce that the more dense (and ordered) packing of double helices into lamellar structures in amylose-deficient starches is due to a different amylopectin branching pattern.     

Influence of amylopectin structure and degree of phosphorylation on the molecular composition of potato starch lintners

Morphology, molecular structure, and thermal properties of potato starch granules with low to high phosphate content were studied as an effect of mild acid hydrolysis (lintnerization) to 80% solubilization at two temperatures (25 and 45°C). Light microscopy showed that the lintners contained apparently intact granules, which disintegrated into fragments upon dehydration. Transmission electron microscopy of rehydrated lintners revealed lacy networks of smaller subunits. The molecular composition of the lintners suggested that they largely consisted of remnants of crystalline lamellae. When lintnerization was performed at 45°C, the lintners contained more of branched dextrins compared to 25°C in both low and intermediate phosphate‐containing samples. High‐phosphate‐containing starch was, however, unaffected by temperature and this was probably due to an altered amylopectin structure rather than the phosphate content. After lintnerization, the melting endotherms were broad with decreased onset and increased peak melting temperatures. The relative crystallinity was lower in lintners prepared at 45°C. A hypothesis that combines the kinetics of lintnerization with the molecular and thermal characteristics of the lintners is presented. © 2013 Wiley Periodicals, Inc. Biopolymers 101: 257–271, 2014.     

In depth study of a new highly efficient raw starch hydrolyzing α-amylase from Rhizomucor sp

A new α-amylase from Rhizomucor sp. (RA) was studied in detail due to its very efficient hydrolysis of raw starch granules at low temperature (32 °C). RA contains a starch binding domain (SBD) connected to the core amylase catalytic domain by a O-glycosylated linker. The mode of degradation of native maize starch granules and, in particular, the changes in the starch structure during the hydrolysis, was monitored for hydrolysis of raw starch at concentrations varying between 0.1 and 31%. RA was compared to porcine pancreatic α-amylase (PPA), which has been widely studied either on resistant starch or as a model enzyme in solid starch hydrolysis studies. RA is particularly efficient on native maize starch and release glucose only. The hydrolysis rate reaches 75% for a 31% starch solution and is complete at 0.1% starch concentration. The final hydrolysis rate was dependent on both starch concentration and enzyme amount applied. RA is also very efficient in hydrolyzing the crystalline domains in the maize starch granule. The major A-type crystalline structure is more rapidly degraded than amorphous domains in the first stages of hydrolysis. This is in agreement with the observed preferential hydrolysis of amylopectin, the starch constituent that forms the backbone of the crystalline part of the granule. Amylose-lipid complexes present in most cereal starches are degraded in a second stage, yielding amylose fragments that then reassociate into B-type crystalline structures, forming the final resistant fraction.     

Effect of annealing and pressure on microstructure of cornstarches with different amylose/amylopectin ratios

This work focuses on the effect of annealing and pressure on microstructures of starch, in particular the crystal structure and crystallinity to further explore the mechanisms of annealing and pressure treatment. Cornstarches with different amylose/amylopectin ratios were used as model materials. Since the samples covered both A-type (high amylopectin starch: waxy and maize) and B-type (high amylose starch: G50 and G80) crystals, the results can be used to clarify some previous confusion. The effect of annealing and pressure on the crystallinity and double helices were investigated by X-ray diffraction (XRD) and ¹³C CP/MAS NMR spectroscopy. The crystal form of various starches remained unchanged after annealing and pressure treatment. XRD detection showed that the relative crystallinity (RC) of high amylopectin starches was increased slightly after annealing, while the RC of high amylose-rich starches remained unchanged. NMR measurement supported the XRD results. The increase can be explained by the chain relaxation. XRD results also indicated that some of the fixed region in crystallinity was susceptible to outside forces. The effect of annealing and pressure on starch gelatinization temperature and enthalpy are used to explore the mechanisms.     

Platelet nanocrystals resulting from the disruption of waxy maize starch granules by acid hydrolysis

Colloidal aqueous suspensions of starch nanocrystals were prepared by submitting native granules from A-type amylopectin-rich waxy maize to a hydrochloric acid hydrolysis. The insoluble residue contains polydisperse and more or less individualized platelet nanocrystals corresponding to the lamellae formed by the association of amylopectin side branches into parallel arrays of double helices. After 2 weeks of hydrolysis, 5-7 nm thick lamellae still connected by alpha(1-->6) linkages were seen edge-on using transmission electron microscopy. As the hydrolysis progressed up to 6 weeks, more alpha(1-->6) branching points located in the inter-lamellar areas were severed and the platelets were thus observed in planar view. Despite a variety of shapes, characteristic geometrical features of the nanocrystalsa were recognized, such as marked 60-65 degrees acute angles and constituting parallelepipedal blocks with a length of 20-40 nm and a width of 15-30 nm. X-ray and electron diffraction showed that these nanoplatelets retain the crystalline A-type of the parent granules.     

Effects of acid hydrolysis and defatting on crystallinity and pasting properties of freeze-thawed high amylose corn starch

Paste of defatted and/or mildly acid-hydrolyzed high amylose corn starch was freeze-thawed, and then the starch was isolated by vacuum drying for the analysis in crystallization and pasting properties. X-ray diffraction pattern and differential scanning calorimetric analysis showed that the crystallinity of the freeze-thawed starch was increased as the degree of hydrolysis increased. The diffraction pattern revealed B- and V-crystals with patterns with diffraction peaks at 17, 20, and 23–25° (2θ), which were developed by amylose recrystallization during the freeze-thawing. The crystal melting enthalpies, for dual endothermic transitions above 100 °C, which resulted from the melting of amylose–lipids complex and amylose double helices were raised by the treatment. The isolated and dried starch formed a paste by aqueous heating under the ambient pressure, and its paste viscogram exhibited substantially higher resistance to shear-thinning, and rapid setback upon cooling. Acid hydrolysis, however, reduced overall paste viscosity, possibly due to the increased crystallinity. Enzyme-resistant starch content in the acid hydrolyzed starch was increased by the freeze-thawing, but not by acid hydrolysis. It was slightly increased by defatting.     

Single crystals of V-amylose complexed with alpha-naphthol

Lamellar square single crystals of V-amylose were obtained by adding alpha-naphthol to metastable dilute aqueous solutions of synthetic amylose chains with an average degree of polymerization of 100. The morphology and structure of the crystals were studied using low-dose transmission electron microscopy including high-resolution imaging, as well as electron and X-ray diffraction. The crystals are crystallized in a tetragonal P4(1)2(1)2 or P4(3)2(1)2 space group with unit cell parameters, calculated from X-ray diffraction data, a = b = 2.2844 nm (+/-0.0005) and c = 0.7806 nm (+/-0.001), implying the presence of two amylose chains per unit cell. High-resolution lattice images of the crystals confirmed that the amylose chains were crystallized as 8-fold helices corresponding to the repeat of four maltosyl units.     

Physicochemical characteristics and fine structure of high-amylose wheat starches isolated from Australian wheat cultivars

High-amylose starch is a source of resistant starch (RS) which have great impact on human health like dietary fiber. Nowadays, high-amylose wheat has been produced by genetic backcrossing, which enhances apparent amylose content and generates altered amylopectin. In this study, the high-amylose wheat starches isolated from various high-amylose wheat cultivars grown in Australia were characterized for understanding their physicochemical properties and fine structure of starch. The physicochemical characteristics of the high-amylose wheat starches are significantly different among the cultivars. Amylose contents of these cultivars were in a range of 28.0–36.9%, which is significantly higher than that of the normal wheat starch (25.6%). The high-amylose wheat starches also had higher blue value but lower λ_max than the normal wheat starch. Gelatinization temperature of the high-amylose wheat starches is higher than that of the normal wheat starch but transition enthalpy is lower. X-ray diffraction showed that the high-amylose wheat starch had C-type crystals close to A-type crystal. Pasting properties of the high-amylose wheat starches were varying depending on the cultivars. However, almost high-amylose wheat starches had lower peak and final viscosities and higher setback viscosity than did the normal wheat starch. Fine structure of amylose and amylopectin was different among the high-amylose wheat cultivars and related to the physicochemical properties of starch. These results help to understand well the characteristics of the high-amylose wheat starches before application for food processing.     

Chemical and physical properties of ginkgo (Ginkgo biloba) starch

Starch isolated from mature Ginkgo biloba seeds and commercial normal maize starches were subjected to α-amylolysis and acid hydrolysis. Ginkgo starch was more resistant to pancreatic α-amylase hydrolysis than the normal maize starch. The chain length distribution of debranched amylopectin of the starches was analyzed by using high performance anion-exchange chromatography equipped with an amyloglucosidase reactor and a pulsed amperometric detector. The chain length distribution of ginkgo amylopectin showed higher amounts of both short and long chains compared to maize starch. Naegeli dextrins of the starches prepared by extensive acid hydrolysis over 12 days demonstrated that ginkgo starch was more susceptible than normal maize to acid hydrolysis. Ginkgo dextrins also demonstrate a lower concentration of singly branched chains than maize dextrins, and unlike maize dextrin, debranched ginkgo shows no multiple branched chains. The ginkgo starch displayed a C-type X-ray diffraction pattern, compared to an A-type pattern for maize. Ginkgo starch and maize starch contained 24.0 and 17.6% absolute amylose contents, respectively.     

Hydrolysis of concentrated raw starch: A new very efficient α-amylase from Anoxybacillus flavothermus

A new α-amylase from Anoxybacillus flavothermus (AFA) was found to be effective in hydrolyzing raw starch in production of glucose syrup at temperatures below the starch gelatinization temperature. AFA is very efficient, leading to 77% hydrolysis of a 31% raw starch suspension. The final hydrolysis degree is reached in 2-3 h at starch concentrations lower than 15% and 8-24 h at higher concentrations. AFA is also very efficient in hydrolyzing the crystalline domains in the starch granule. The major A-type crystalline structure is more rapidly degraded than amorphous domains in agreement with the observed preferential hydrolysis of amylopectin. Amylose-lipid complexes are degraded in a second step, yielding amylose fragments which then re-associate into B-type crystalline structures forming the final α-amylase resistant fraction. The mode of action of AFA and the factors limiting complete hydrolysis are discussed in details.     

Split crystallization during debranching of maltodextrins at high concentration by isoamylase

Debranching and crystallization occurring during the enzymatic treatment of 25% (w/v) aqueous solutions of maltodextrins by isoamylase at 52 degrees C were studied. The morphology as well as the crystal and molecular structures of the precipitates formed at different stages of the reaction were characterized. Two types of resulting products, differing in terms of structure and morphology, were evidenced. A loose B-type network, containing linear and branched chains of highest molecular weight, was mainly formed during the first 12 h of reaction, whereas aggregates of A-type lamellar crystals, made of short linear chains, were predominantly obtained between 12 and 48 h. The aggregation behavior as a function of temperature and molecular weight distribution of such substrates was discussed and compared to that of related starch products.     

Acid hydrolysis of native and annealed starches and branch-structure of their Naegeli dextrins

Eight commercial starches, including common corn, waxy corn, wheat, tapioca, potato, Hylon V, Hylon VII, and mung bean starch, were annealed by a multiple-step process, and their gelatinization characteristics were determined. Annealed starches had higher gelatinization temperatures, reduced gelatinization ranges, and increased gelatinization enthalpies than their native starches. The annealed starches with the highest gelatinization enthalpies were subjected to acid hydrolysis with 15.3% H2SO4, and Naegeli dextrins were prepared after 10 days' hydrolysis. Annealing increased the acid susceptibility of native starches in the first (rapid) and the second (slow) phases with potato starch showing the greatest and high amylose starches showing the least changes. Starches with a larger shift in onset gelatinization temperature also displayed a greater percent hydrolysis. The increase in susceptibility to acid hydrolysis was proposed to result from defective and porous structures that resulted after annealing. Although annealing perfected the crystalline structure, it also produced void space, which led to porous structures and possible starch granule defects. The molecular size distribution and chain length distribution of Naegeli dextrins of annealed and native starches were analyzed. The reorganization of the starch molecule during annealing occurred mainly within the crystalline lamellae. Imperfect double helices in the crystalline lamellae improved after annealing, and the branch linkages at the imperfect double helices became protected by the improved crystalline structure. Therefore, more long chains were observed in the Naegeli dextrins of annealed starches than in native starches.     

Determination of the structural changes by FT-IR, Raman, and CP/MAS C NMR spectroscopy on retrograded starch of maize tortillas

The nixtamalization, production and storage of tortillas in refrigeration cause several changes on the starch structure, resulting in an increased crystallinity and therefore a higher content of resistant starch. The IR analysis for resistant starch (RS) showed a band at 1047 cm⁻¹ associated to the retrogradation process; this band was due to the weakening of the intermolecular H-bonds. These associated together to form ordered regions. The Raman analysis shows a characteristic band at 856 cm⁻¹ corresponding to C-C skeletal modes of glucose of α-1,4 glycosidic linkage starches, and a band at 480 cm⁻¹ attributed to skeletal vibrations of the pyranose ring in the glucose unit of starches. These changes may be related to the polymerization degree of the starch molecules, as well as to the retrogradation of amylose and amylopectin. The spectrum of ¹³C CP-MAS/NMR for RS3 supports the results obtained by IR and Raman. Lipidic and proteic groups were observed which may be in the form of complexes with amylose. One can proclaim that the existence of the salt form is induced and stabilized by the interactions dominating the V amylose structure in the solid state.     

Structural studies of starches with different water contents

The proportion of double helices in starches from a series of pea [rb, rug4-b, rug3-a, and lam-c mutants, and the wild type (WT) parental line], potato and maize (normal and low amylose), and wheat (normal) lines, ranged from about 30-50% on a dry weight basis. In relatively dry starch powders, only about half of the double helices were in crystalline order, this proportion being higher for A-type than for B-type starches. Using starch from WT pea as an example, it was found that increasing water content results in an increase in total crystallinity. When the water content was raised to a level similar to that in excess water, the proportion of crystallinity was close to the proportion of double helices (DH). Measuring crystallinity in starches with a high water content is difficult using traditional methods such as x-ray diffraction. A method was developed, therefore, for determining starch structural characteristics in excess water by measuring the enthalpy of gelatinization transition in quasi-equilibrium differential scanning calorimetry (DSC) experiments. It is suggested that DH% = DeltaH(sp)/DeltaH(DH) x 100%, where DeltaH(sp) and DeltaH(DH) represent the specific enthalpies of gelatinisation transition, DeltaH(sp) being measured as J/g dry starch weight and DeltaH(DH) as J/g DH, in starch. Studies on potato and maize starches in excess water and in 0.6M KCl showed, respectively, that DeltaH(DH) was 36.3 and 35.6 J/g for B-type polymorphs and 33.0 and 35.0 J/g for A-type polymorphs. For C-type starches, such as those from pea, intermediate values of DeltaH(DH), related to the proportions A-/B-polymorphs, should be used. The type of crystallinity in starch can be determined by the shift in peak temperature for thermograms in excess water and in excess 0.6M KCl. For B-polymorphs this shift was found to be approximately 2-3 degrees C and for A-polymorphs approximately 7-12 degrees C. The ratio between ordered areas with both A- and B-polymorphs can be determined from the enthalpies of disruption of each area. These enthalpies can be obtained by deconvolution of bimodal thermograms produced by C-type starches in excess 0.6M KCl. This methodical approach can be applied to all starches that give a sharp gelatinisation thermogram in excess water. Using a range of methods, including DSC, it was found that starch granules from the mutant peas are constructed in a similar way to those from the WT, with B-polymorphs in the centre and A-polymorphs at the periphery of all granules. The proportion of A/B-polymorphs, however, differed between the mutants. It was found that in addition to increasing the total crystallinity, increasing the water content within the granules also resulted in an increase in the proportion of B-polymorphs.     

A study of ordered structure in acid-modified tapioca starch by C CP/MAS solid-state NMR

Acid modification of tapioca starch earlier reported to increase the mechanical strength of tablets. The development of ordered structure (double helices) of these starches was monitored after equilibrating at 0.90 a_w (25 °C) using ¹³C CP/MAS NMR and X-ray diffraction. As the hydrolysis time increased, the intensity of the resonance for C1 and C4 amorphous fractions decreased while that for C1 and C4 double helix fractions increased. Relative crystallinity (%) obtained from ¹³C CP/MAS NMR and X-ray diffraction methods both increased sharply initially and then levelled off with hydrolysis time. The initial increase in relative double helix content and crystallinity was due to a hydrolytic destruction in the amorphous domain, retrogradation of the partially hydrolyzed amylose and crystallization of free amylopectin double helices. After 192 h, these two parameters were not significantly different (=0.05) indicating that the double helices that were not arranged into crystalline regions either had been hydrolyzed or crystallized.     

Structural and thermodynamic properties of rice starches with different genetic background Part 1. Differentiation of amylopectin and amylose defects

A combined DSC - HPAEC-PAD approach, gel permeation chromatography and mild long-term acidic hydrolysis were employed to study the effects of amylopectin chain-length distributional and amylose defects on the assembly structures of amylopectin (crystalline lamellae, amylopectin clusters) in A-type polymorphic starches extracted from 11 Thai cultivars of rice with different amylose level. Joint analysis of the data allowed determining the contributions of different populations of amylopectin chains to the thermodynamic melting parameters of crystalline lamellae. It was shown that amylopectin chains with DP 6-12 and 25or=37 could be related to chains stabilizing these structures. The total effect of amylose and amylopectin defects can be described by means of Thomson-Gibbs' equation. The increase of defects in the assembly structures is accompanied by rise of the rates of acidic hydrolysis of both amorphous and crystalline parts in starches.     

The effect of water content on the ordered/disordered structures in starches

(13)C cross-polarization magic angle spinning NMR has been used to study the ordered and disordered structures of starches with different water contents. The amorphous regions of starch have been shown to produce NMR patterns only if they are in a glassy state, the widths, positions, and areas of the peaks to some extent being dependent on the temperature and the water content of the starch. In the amorphous region, the peaks were all Gaussian in shape, while the peaks in the ordered regions had Lorentz profiles. Water contents in the range 10-50% did not influence the proportion of double helices in the starch. Decreasing the water content to 1-3%, however, resulted in a significant decrease in the proportion of double helices, the effect being greater in B- than in A-type starches. It is suggested that short-range order structures in starches (double helices) are stabilized by becoming part of long-range order structures (crystallites).     

The relationship between internal chain length of amylopectin and crystallinity in starch

Molecular models of amylopectin were created and investigated by computer simulation. First, single and double helices of various lengths were constructed. The 1 → 6 branching in double and single helices of amylopectin was studied. Subunits of single helices, double helices, and branch points were used as building blocks of larger systems. The possible makeup of amylopectin unit clusters was investigated via a series of models, including single–single, double–single, and double–double helix systems. The lengths of the single helix section that linked two branch points (internal chains) was systematically varied between values of 0–10 glucose residues. It was found that certain internal chain lengths lead to parallel double helices. Thus, it was postulated that the length of internal chains may determine the degree of local crystallinity. Furthermore, it was noted that some of the low‐energy arrangement of double helices could be superimposed on either the two adjacent and nonadjacent double helices of crystalline A and B starch polymorphs. In other cases, the distance between the double helices is so large that it may in fact be a model for branching between two amylopectin crystals or unit clusters. Results obtained through this work were corroborated, where possible, with information available from crystallographic, branching, and enzymatic studies. © 1999 John Wiley & Sons, Inc. Biopoly 50: 381–390, 1999