Thermodynamics of unfolding of the alpha-amylase inhibitor tendamistat. Correlations between accessible surface area and heat capacity.

Unfolding of the small alpha-amylase inhibitor tendamistat (74 residues, 2 disulfide bridges) has been characterized thermodynamically by high sensitivity scanning microcalorimetry. To link the stability parameters with structural information we use heat capacity group parameters and water accessible surface areas to calculate the change in heat capacity on unfolding of tendamistat. Our results show that both the group parameter and surface area approaches provide a reasonable, though not perfect, basis for delta Cp calculations. When using the experimentally determined temperature-independent heat capacity increase of 2.89 kJ mol-1 K-1 tendamistat exhibits convergence of thermodynamic parameters at about 140 degrees C, in agreement with recent predictions of the temperature at which the hydrophobic hydration is supposed to disappear. Despite the apparent support of this new view of the hydrophobic effect, there are inconsistencies in the interpretation of the thermodynamic parameters and these are addressed in the Discussion. The specific stability of tendamistat is similar to that of modified bovine pancreatic trypsin inhibitor, with only two of the native three disulfide bridges intact. This observation confirms our previous conclusion that disulfide bridges affect significantly the enthalpy and entropy of unfolding. The recent study by Doig & Williams provides additional convincing support for this conclusion. The predictive scheme proposed by these authors permits a fair estimate of the Gibbs free energy and enthalpy changes of these two proteins.     

Heterologous expression of the alpha-amylase inhibitor gene cloned from an amplified genomic sequence of Streptomyces tendae.

The coding region for a secreted proteinaceous inhibitor of the human alpha-amylase (tendamistat; HOE 467) was identified by using a synthetic oligonucleotide probe. The gene is part of a 37-kilobase amplified genomic sequence found in an overproducing mutant of Streptomyces tendae. After subcloning, sequence analysis revealed an open reading frame of 312 base pairs preceded by a putative ribosome-binding site. The reading frame is 30 codons longer than necessary for the mature protein. This sequence coded for an amino-terminal extension of tendamistat and shows typical features of a signal peptide. After being cloned into Streptomyces vector plasmids and transformed to the heterologous host, Streptomyces lividans TK24, the gene was expressed, and the alpha-amylase inhibitor was correctly processed and secreted into the culture medium. The amount of secreted protein was dependent on the gene dosage and on the promoter arrangement.     

Use of phage display to probe the evolution of binding specificity and affinity in integrins

The specific binding of RGD-containing proteins to integrin is a function of both the conformation of and the local sequence surrounding the RGD motif. To study the effect of these factors on integrin binding affinity and specificity, we obtained RGD-containing ligands specific for different integrins presented on the same protein scaffold. The beta-turn region between two anti-parallel beta-strands on the loop I of tendamistat, an inhibitor of alpha-amylase, was extended by two residues and randomized in a phagemid library. This library and two subsequently constructed RGD-containing loop I libraries were biopanned with purified integrins alphaIIbbeta3, alphaVbeta3 and alphaVbeta5 individually. The sequence analysis of selected tendamistat variants and characterization by phage ELISA revealed that phage adhesion is mediated exclusively by an RGD motif located at only two out of four possible positions on loop I. Further, sequences flanking the RGD motif were specific for different integrin targets. Interestingly, selected tendamistat variants mimic natural integrin ligands, both in sequence similarity and in integrin binding specificity, indicating that various ligand specificity patterns can be generated by driving towards maximum affinity in the integrin-ligand complexes.     

Isolation and structure elucidation of an alpha-amylase inhibitor, AI-3688, from Streptomyces aureofaciens

A novel polypeptide inhibitor, AI-3688, which acts upon human pancreatic alpha-amylase, was isolated from fermentation broth of Streptomyces aureofaciens. The purified peptide contains no unusual amino acids. Its Mr is 3936. The primary structure of AI-3688 was elucidated by automatic Edman degradation of the native or modified inhibitor. Two intramolecular cysteines form a disulphide bridge, thus creating a ring structure consisting of 17 amino acids. Strong sequence homology also exists to another microbial alpha-amylase inhibitor, tendamistat (HOE 467). This paper discusses the role of a common partial sequence, -Gln-Ser-Trp-Arg-Tyr-, present in the loop of both inhibitors as the active site of microbial peptide alpha-amylase inhibitors.     

Cyclic and linear peptides derived from alpha-amylase inhibitory protein tendamistat

Tendamistat is a strong inhibitory protein of porcine pancreatic alpha-amylase (PPA) with a K(i) value of 0.2 nM. To develop potent alpha-amylase inhibitors, we synthesized six odd-length cyclic peptides (5-15 residues) and four even-length cyclic peptides (10 and 12 residues) having the inhibitory sequence of tendamistat. Their PPA inhibitory activities were evaluated, and, among them, the 11-residue cyclic peptide Ten(15-23) (K(i) = 0.27 microM) exhibited the strongest inhibitory activity (K(i) = 0.27-1.41 microM). To examine the effect of cyclic structure on PPA inhibition, ten linear peptides corresponding to the cyclic peptides were also synthesized, and their PPA inhibitory activities were evaluated (K(i) = 0.28-1.00 microM). Interestingly, the 11-residue linear peptide Ten(15-23) exhibited almost the same inhibitory activity (K(i) = 0.28 microM) as that of cyclic Ten(15-23). The results of a circular dichroism study indicated that stabilization of the beta-hairpin structure occurred only for cyclic Ten(15-23). Also, the results of proteolytic digestion experiments of the cyclic and linear Ten(15-23) peptides by trypsin and chymotrypsin suggested no differences in protease resistance between the cyclic and linear structures. Therefore, we demonstrated that both cyclic and linear peptides containing the inhibitory sequence of tendamistat exhibit potent PPA inhibitory activity.     

Variation of pKa in the N-terminal tyrosine side chain in octapeptide analogs of tendamistat influences alpha-amylase inhibition

Peptide analogs of tendamistat were synthesized and analyzed for alpha-amylase inhibitory activity. The pK(a) of the N-terminal tyrosine was modified by incorporation of ring-substituted analogs, which alters hydrogen bonding capacity. K(i) values ranging from 70 to 524 microM generally increased with increasing pK(a), indicating a necessity for H-bond donor ability.     

Tendamistat surface accessibility to the TEMPOL paramagnetic probe

TEMPOL, the soluble spin-label 4-hydroxy-2,2,6,6-tetramethyl-piperidine-1-oxyl, has been used to determine the surface characteristics of tendamistat, a small protein with a well-characterised structure both in solution and in the crystal. A good correlation has been found between predicted regions of exposed protein surface and the intensity attenuations induced by the probe on 2D NMR TOCSY cross peaks of tendamistat in the paramagnetic water solution. All the high paramagnetic effects have been interpreted in terms of more efficient competition of TEMPOL with water molecules at some surface positions. The active site of tendamistat coincides with the largest surface patch accessible to the probe. A strong hydration of protein N and C termini can also be suggested by this structural approach, as these locations exhibit reduced paramagnetic perturbations. Provided that the solution structure is known, the use of this paramagnetic probe seems to be well suited to delineate the dynamic behaviour of the protein surface and, more generally, to gain relevant information about the molecular presentation processes.     

Disulphide bridge formation of proinsulin fusion proteins during secretion in Streptomyces

To study disulphide bridge formation by Streptomyces lividans TK 24 in secreted single chain precursors of insulin a fusion protein (PTF 1) was investigated consisting of monkey proinsulin and the aminoterminal sequence Asp1 to Gly43 of the alpha-amylase inhibitor tendamistat from Streptomyces tendae. The purified soluble protein PTF 1 has a molecular mass of 14.4 kDa. The primary structure was elucidated after digestion with lysyl endopeptidase and fragment analysis. In this system, disulphide bond formation occurs in a way that the first cysteine in proinsulin is linked to the next following cysteine in the amino-acid chain resulting in a non-natural folding of the insulin part of the fusion protein. Re-folding of PTF 1 by reduction and re-oxidation followed by proteolytic digestions led to insulins which are identical to authentic material. The ease of correct disulphide bond formation in solution and incorrect processing during secretion suggests involvement of yet unknown factors leading to an unfavourable folding of proinsulin.     

Apparent two-state tendamistat folding is a sequential process along a defined route

The small all-beta-sheet protein tendamistat folds and unfolds rapidly in apparent two-state reactions. Kinetic measurements of two tendamistat variants under various solvent conditions reveal, however, that folding occurs in at least two sequential steps through a metastable obligatory intermediate. Depending on the solvent conditions either step can become rate limiting. The activation parameters indicate that the first step represents an enthalpic barrier whereas the second step is an entropic barrier at 25 degrees C. Our results suggest that initial non-specific collapse precedes formation of native secondary and tertiary structure in tendamistat folding. This points at a distinct route in tendamistat folding and indicates that partially folded metastable intermediates might play an important role in the mechanism of apparent two-state folding.     

Effects of disulfide bonds on folding behavior and mechanism of the beta-sheet protein tendamistat

Tendamistat, a small disulfide-bonded beta-sheet protein, and its three single/double-disulfide mutants are investigated by using a modified Gō-like model, aiming to understand the folding mechanism of disulfide-bonded protein as well as the effects of removal of disulfide bond on the folding process. Our simulations show that tendamistat and its two single-disulfide mutants are all two-state folders, consistent with the experimental observations. It is found that the disulfide bonds as well as three hydrogen bonds between the N-terminal loop-0 and strand-6 are of significant importance for the folding of tendamistat. Without these interactions, their two-state behaviors become unstable and the predictions of the model are inconsistent with experiments. In addition, the effect of disulfide bonds on the folding process are studied by comparing the wild-type tendamistat and its two mutants; it is found that the removal of either of the C11-C27 or C45-C73 disulfide bond leads to a large decrease in the thermodynamical stability and loss of structure in the unfolded state, and the effect of the former is stronger than that of the later. These simulation results are in good agreement with experiments and, thus, validate our model. Based on the same model, the detailed folding pathways of the wild-type tendamistat and two mutants are studied, and the effect of disulfide bonds on the folding kinetics are discussed. The obtained results provide a detailed folding picture of these proteins and complement experimental findings. Finally, the folding nuclei predicted to be existent in this protein tendamistat as well as its mutants are firstly identified in this work. The positions of the nucleus are consistent with those argued in experimental studies. Therefore, a nucleation/growth folding mechanism that can explain the two-state folding manner is clearly characterized. Moreover, the effect by the removal of each disulfide bond on the folding thermodynamics and dynamics can also be well interpreted from their influence on the folding nucleus. The implementation of this work indicates that the modified Gō-like model really describes the folding behavior of protein tendamistat and could be used to study the folding of other disulfide-bonded proteins.     

Structure and dynamic properties of the single disulfide-deficient α-amylase inhibitor [C45A/C73A]tendamistat: An NMR study

Covalent linkages such as disulfide bonds are important for the stabilization of proteins. In the present NMR study we compare the structure and the dynamics of the single disulfide-deficient variant C45A/C73A of the α-amylase inhibitor tendamistat and the wild-type protein, which contains two disulfide bonds (C11-C27 and C45-C73). Complete proton assignment was achieved by standard homonuclear 2D techniques for the variant. Chemical shift differences, intra-strand NOE effects and protected amide proton were used to compare the connectivity of the secondary structure elements of variant and wild-type. Dynamic properties of the wild-type protein were studied by ¹³C_α heteronuclear NOE experiments with carbon in natural abundance. ¹⁵N isotope labeling was necessary to obtain the relaxation parameters of the variant, because of sample degradation. The ¹⁵N resonance assignment was achieved by a ¹⁵N 3D-NOESY-HMQC. Removal of the C45-C73 bond by the C45A/C73A mutation has no influence upon the β-barrel structure of tendamistat beside very local changes at the mutation site. The relaxation data revealed only subtle differences between variant and wild-type on a subnanosecond time scale. Only the N-terminus and G62 in the connecting loop between the anti-parallel β-sheets showed an increased mobility. The results are discussed in respect to thermodynamic stability and the secretion efficiency of tendamistat. Proteins 33:285–294, 1998. © 1998 Wiley-Liss, Inc.     

Nonprolyl cis peptide bonds in unfolded proteins cause complex folding kinetics

Folding of tendamistat, an inhibitor of alpha-amylase, is a fast two-state process accompanied by two minor slow reactions, which were assigned to prolyl isomerization. In a proline-free variant, 5% of the molecules still fold slowly with a rate constant of 2.5 s(-1). This reaction is caused by a slow equilibrium between two populations of unfolded molecules. The time constant for this equilibration process, its sensitivity to LiCl and its temperature dependence identify it as a cis-trans isomerization of nonprolyl peptide bonds. Although nonprolyl peptide bonds have the cis conformation populating only approximately 0.15% in unfolded proteins, their large number generates a significant fraction of slow-folding molecules. This emphasizes that heterogeneous populations in an unfolded protein can induce complex folding kinetics on various time scales.     

Effect of proline to alanine mutation on the thermal stability of the all-beta-sheet protein tendamistat

The temperature dependent denaturation of wild-type tendamistat and of the proline-free triple mutant P7A/P9A/P50A was investigated using Fourier-transform infrared (FTIR) spectroscopy. Whereas the temperature-induced unfolding is reversible in the wild type, aggregation was observed for the proline-free tendamistat when studied under the same conditions. The midpoint unfolding temperature T(m) was found as 82.3+/-0.5 degrees C in (2)H2O. The thermal stability of the proline-free mutant is reduced by 15 degrees C as compared to the wild type. Changes in the strength of hydrogen bonding of tyrosine O-H groups upon unfolding and aggregation are reflected in small shifts of the C-C stretching mode of the aromatic ring near 1515 cm(-1). Evaluation of data from different infrared (IR) bands sensitive to changes in secondary structure as well as to changes in tertiary structure strongly supports a two-state model for the unfolding process of wild-type tendamistat.     

Purification, characterization, and nucleotide sequence of the thermolabile alpha-amylase from the antarctic psychrotroph Alteromonas haloplanctis A23.

The alpha-amylase excreted by the antarctic bacterium Alteromonas haloplanctis was purified and the corresponding amy gene was cloned and sequenced. N- and C-terminal amino acid sequencing were used to establish the primary structure of the mature A. haloplanctis alpha-amylase which is composed of 453 amino acids with a predicted Mr of 49,340 and a pI of 5.5. Three Ca2+ ions are bound per molecule and its activity is modulated by chloride ions. Within the four consensus sequences, Asp-174, Glu-200, and Asp-264 are the proposed catalytic residues. The psychrotrophic A. haloplanctis alpha-amylase is characterized by a high amylolytic activity at low temperatures, a reduced apparent optimal temperature, and typical thermodynamic activation parameters A. haloplanctis alpha-amylase has also a low thermal stability as demonstrated by the temperature effect on both activity and secondary structure. It is suggested that structure flexibility and lower sensitivity of secondary structure to temperature variations in the low temperature range are the main structural adaptations of the psychrotrophic enzyme. The unusual stacking of small amino acids around the catalytic residues is proposed as a factor inducing active site flexibility and concomitant high activity of the enzyme at low temperatures.     

beta-hairpin stability and folding: molecular dynamics studies of the first beta-hairpin of tendamistat

The stability and (un)folding of the 19-residue peptide, SCVTLYQSWRYSQADNGCA, corresponding to the first beta-hairpin (residues 10 to 28) of the alpha-amylase inhibitor tendamistat (PDB entry 3AIT) has been studied by molecular dynamics simulations in explicit water under periodic boundary conditions at several temperatures (300 K, 360 K and 400 K), starting from various conformations for simulation lengths, ranging from 10 to 30 ns. Comparison of trajectories of the reduced and oxidized native peptides reveals the importance of the disulphide bridge closing the beta-hairpin in maintaining a proper turn conformation, thereby insuring a proper side-chain arrangement of the conserved turn residues. This allows rationalization of the conservation of those cysteine residues among the family of alpha-amylase inhibitors. High temperature simulations starting from widely different initial configurations (native beta-hairpin, alpha and left-handed helical and extended conformations) begin sampling similar regions of the conformational space within tens of nanoseconds, and both native and non-native beta-hairpin conformations are recovered. Transitions between conformational clusters are accompanied by an increase in energy fluctuations, which is consistent with the increase in heat capacity measured experimentally upon protein folding. The folding events observed in the various simulations support a model for beta-hairpin formation in which the turn is formed first, followed by hydrogen bond formation closing the hairpin, and subsequent stabilization by side-chain hydrophobic interactions.     

Structure-based protein engineering for alpha-amylase inhibitory activity of plant defensin

The structure of a novel plant defensin isolated from the seeds of the mung bean, Vigna radiate, has been determined by (1)H nuclear magnetic resonance spectroscopy. The three-dimensional structure of VrD2, the V. radiate plant defensin 2 protein, comprises an alpha-helix and one triple-stranded anti-parallel beta-sheet stabilized by four disulfide bonds. This protein exhibits neither insecticidal activity nor alpha-amylase inhibitory activity in spite of showing a similar global fold to that of VrD1, an insecticidal plant defensin that has been suggested to function by inhibiting insect alpha-amylase. Our previous study proposed that loop L3 of plant defensins is important for this inhibition. Structural analyses and surface charge comparisons of VrD1 and VrD2 revealed that the charged residues of L3 correlate with the observed difference in inhibitory activities of these proteins. A VrD2 chimera that was produced by transferring the proposed functional loop of VrD1 onto the structurally equivalent loop of VrD2 supported this hypothesis. The VrD2 chimera, which differs by only five residues compared with VrD2, showed obvious activity against Tenebrio molitor alpha-amylase. These results clarify the mode of alpha-amylase inhibition of plant defensins and also represent a possible approach for engineering novel alpha-amylase inhibitors. Plant defensins are important constituents of the innate immune system of plants, and thus the application of protein engineering to this protein family may provide an efficient method for protecting against crop losses.     

Knowledge-based model of a glucosyltransferase from the oral bacterial group of mutans streptococci.

Mutans streptococci glucosyltransferases catalyze glucosyl transfer from sucrose to a glucan chain. We previously identified an aspartyl residue that participates in stabilizing the glucosyl transition state. The sequence surrounding the aspartate was found to have substantial sequence similarity with members of alpha-amylase family. Because little is known of the protein structure beyond the amino acid sequence, we used a knowledge-based interactive algorithm, MACAW, which provided significant level of homology with alpha-amylases and glucosyltransferase from Streptococcus downei gtfI (GTF). The significance of GTF similarity is underlined by GTF/alpha-amylase residues conserved in all but one alpha-amylase invariant residues. Site-directed mutagenesis of the three GTF catalytic residues are homologous with the alpha-amylase catalytic triad. The glucosyltransferases are members of the 4/7-superfamily that have a (beta/alpha)8-barrel structure and belong to family 13 of the glycohydralases.     

Structure of yeast pGKL 128-kDa killer-toxin secretion signal sequence. Processing of the 128-kDa killer-toxin-secretion-signal-alpha-amylase fusion protein.

The linear double-stranded DNA plasmid pGKL1 in yeast encodes a killer toxin consisting of 97-kDa, 31-kDa and 28-kDa subunits. A 128-kDa protein precursor of the 97-kDa and 31-kDa subunits, was first synthesized with a 29-amino-acid extension at its NH2-terminus as a secretion signal sequence. In the present study, the property of this signal sequence was studied by the analysis of a fusion protein with mouse alpha-amylase. Using the secretion signal sequence of the killer protein, the mouse alpha-amylase was successfully secreted into the culture medium. An intracellular precursor form of alpha-amylase was identified and purified. Analysis of the NH2-terminal sequence of this precursor molecule indicated that it corresponded to the secretory intermediate (pro form) of alpha-amylase with the removal of the hydrophobic segment (Met1-Gly16) of the secretion signal. Both the secretion of alpha-amylase into the culture medium and the detection of the pro-alpha-amylase species in the cells were prohibited by a sec 11 mutation, or by the conversion of Gly to Val at the 16th position of the secretion signal. These results strongly suggest that the cleavage occurs between Gly16 and Leu17 by a signal peptidase, and that this cleavage is required for the secretion of alpha-amylase into the medium. Based on the data from the NH2-terminal amino acid sequences of secreted alpha-amylases, we conclude that the 29-amino-acid secretion signal present in the 128-kDa killer toxin precursor protein is a prepro structure.