Structure-activity relationships of water-soluble cationic methacrylate/methacrylamide polymers for nonviral gene delivery.

A number of water-soluble cationic carriers was evaluated as transfectant. Almost all studied cationic methacrylate/methacrylamide polymers were able to condense the structure of plasmid DNA, yielding polymer/plasmid complexes (polyplexes) with a size of 0.1-0.3 micron and a slightly positive zeta-potential, which can be taken up by cells, e.g., via endocytosis. However, the transfection efficiency and the cytotoxicity of the polymers differed widely: the highest transfection efficiency and cytotoxicity were observed for poly[2-(dimethylamino)ethyl methacrylate], p(DMAEMA). Assuming that polyplexes enter cells via endocytosis, p(DMAEMA) apparently has advantageous properties to escape the endosome. A possible explanation is that, due to its average pK(a) value of 7.5, p(DMAEMA) is partially protonated at physiological pH and might behave as a proton sponge. This might cause a disruption of the endosome, which results in the release of both the polyplexes and cytotoxic endosomal/lysosomal enzymes into the cytosol. On the other hand, the analogues of p(DMAEMA) studied here have a higher average pKa value and have, consequently, a higher degree of protonation and a lower buffering capacity. This might be associated with a lower tendency to destabilize the endosome, resulting in both a lower transfection efficiency and a lower cytotoxicity. Furthermore, molecular modeling showed that, of all studied polymers, p(DMAEMA) has the lowest number of interactions with DNA. We therefore hypothesized that the superior transfection efficiency of p(DMAEMA) containing polyplexes can be ascribed to an intrinsic property of p(DMAEMA) to destabilize endosomes combined with an easy dissociation of the polyplex once present in the cytosol and/or the nucleus.     

Chloride accumulation and swelling in endosomes enhances DNA transfer by polyamine-DNA polyplexes

The "proton sponge hypothesis" postulates enhanced transgene delivery by cationic polymer-DNA complexes (polyplexes) containing H+ buffering polyamines by enhanced endosomal Cl- accumulation and osmotic swelling/lysis. To test this hypothesis, we measured endosomal Cl- concentration, pH, and volume after internalization of polyplexes composed of plasmid DNA and polylysine (POL), a non-buffering polyamine, or the strongly buffering polyamines polyethylenimine (PEI) or polyamidoamine (PAM). [Cl-] and pH were measured by ratio imaging of fluorescently labeled polyplexes containing Cl- or pH indicators. [Cl-] increased from 41 to 80 mM over 60 min in endosomes-contained POL-polyplexes, whereas pH decreased from 6.8 to 5.3. Endosomal Cl- accumulation was enhanced (115 mM at 60 min) and acidification was slowed (pH 5.9 at 60 min) for PEI and PAM-polyplexes. Relative endosome volume increased 20% over 75 min for POL-polyplexes versus 140% for PEI-polyplexes. Endosome lysis was seen at >45 min for PEI but not POL-containing endosomes, and PEI-containing endosomes showed increased osmotic fragility in vitro. The slowed endosomal acidification and enhanced Cl- accumulation and swelling/lysis were accounted for by the greater H+ buffering capacity of endosomes containing PEI or PAM versus POL (>90 mM versus 46 H+/pH unit). Our results provide direct support for the proton sponge hypothesis and thus a rational basis for the design of improved non-viral vectors for gene delivery.     

Physicochemical properties of polymers: An important system to overcome the cell barriers in gene transfection

Delivery of the macromolecules including DNA, miRNA, and antisense oligonucleotides is typically mediated by carriers due to the large size and negative charge. Different physical (e.g., gene gun or electroporation), and chemical (e.g., cationic polymer or lipid) vectors have been already used to improve the efficiency of gene transfer. Polymer‐based DNA delivery systems have attracted special interest, in particular via intravenous injection with many intra‐ and extracellular barriers. The recent progress has shown that stimuli‐responsive polymers entitled as multifunctional nucleic acid vehicles can act to target specific cells. These nonviral carriers are classified by the type of stimulus including reduction potential, pH, and temperature. Generally, the physicochemical characterization of DNA‐polymer complexes is critical to enhance the transfection potency via protection of DNA from nuclease digestion, endosomal escape, and nuclear localization. The successful clinical applications will depend on an exact insight of barriers in gene delivery and development of carriers overcoming these barriers. Consequently, improvement of novel cationic polymers with low toxicity and effective for biomedical use has attracted a great attention in gene therapy. This article summarizes the main physicochemical and biological properties of polyplexes describing their gene transfection behavior, in vitro and in vivo. In this line, the relative efficiencies of various cationic polymers are compared. © 2015 Wiley Periodicals, Inc. Biopolymers 103: 363–375, 2015.     

Reduction-degradable linear cationic polymers as gene carriers prepared by Cu(I)-catalyzed azide-alkyne cycloaddition

Linear reduction-degradable cationic polymers with different secondary amine densities (S2 and S3) and their nonreducible counterparts (C2 and C3) were synthesized by Cu(I)-catalyzed azide-alkyne cycloaddition (CuAAC) step-growth polymerization of the dialkyne-oligoamine monomers and the diazide monomers. These polymers were studied with a goal of developing a set of new gene carriers. The buffering capacity and DNA binding ability of these polymers were evaluated by acid-base titration, gel retardation, and ethidium bromide (EB) exclusion assay. The polymers with lower amine density exhibit a weaker DNA-binding ability but a stronger buffering capacity in the range of pH 5.1 and 7.4. Particle size and zeta-potential measurements demonstrate that the polymers with higher amine density condense pDNA to form polyplexes with smaller sizes, while the disulfide bond in the backbone shows a negative effect on the condensing capability of the polymers, resulting in the formation of polyplexes with large size and nearly neutral surface. The reduction-sensitive polyplexes formed by polymer S2 or S3 can be disrupted by dithiothreitol (DTT) to release free DNA, which has been proven by the combination of gel retardation, EB exclusion assay, particles sizing, and zeta potential measurements. Cell viability measurements by MTT assay demonstrate that the reduction-degradable polymers (S2 and S3) have little cytotoxicity while the nonreducible polymers (C2 and C3) show obvious cytotoxicity, in particular, at high N/P ratios. In vitro transfection efficiencies of these polymers were evaluated using EGFP and luciferase plasmids as the reporter genes. Polymers S3 and S2 show much higher efficiencies than the nonreducible polymers C3 and C2 in the absence of 10% serum; unexpectedly, the lowest transfection efficiency has been observed for polymer S3 in the presence of serum.     

Biophysical and transfection studies of an amine-modified poly(vinyl alcohol) for gene delivery

Novel, multifunctional polymers remain an attractive objective for drug delivery, especially for hydrophilic macromolecular drugs candidates such as peptides, proteins, RNA, and DNA. To facilitate intracellular delivery of DNA, new amine-modified poly(vinyl alcohol)s (PVAs) were synthesized by a two-step process using carbonyl diimidazole activated diamines to produce PVAs with different degrees of amine substitution. The resulting polymers were characterized using NMR, thermogravimetric analysis (TGA), and gelpermation chromatography (GPC). Atomic force microscopy (AFM), dynamic light scattering photon correlation spectroscopy (PCS), and zeta-potential were used to investigate polyplexes of DNA with PVA copolymers. These studies suggest an influence of the polycation structure on the morphology of condensed DNA in polyplexes. Significant differences were observed by changing both the degrees of amine substitution and the structure of the PVA backbone, demonstrating that both electrostatic and hydrophobic interactions affect DNA condensation. DNA condensation measured by an ethidium bromide intercalation assay showed a higher degree of condensation with pDNA with increasing degrees of amine substitution and more hydrophobic functional groups. These findings are in line with transfection experiments, in which a good uptake of these polymer DNA complexes was noted, unfortunately, with little endosomal escape. Co-administration of chloroquine resulted in increased endosomal escape and higher transfection efficiencies, due to disruption of the endosomal membrane. In this study, the structural requirements for DNA complexation and condensation were characterized to provide a basis for rational design of nonviral gene delivery systems.     

Characterization of degradable polyelectrolyte multilayers fabricated using DNA and a fluorescently-labeled poly(β-amino ester): shedding light on the role of the cationic polymer in promoting surface-mediated gene delivery

Polyelectrolyte multilayers (PEMs) fabricated from cationic polymers and DNA have been investigated broadly as materials for surface-mediated DNA delivery. One attractive aspect of this "multilayered" approach is the potential to exploit the presence of cationic polymer "layers" in these films to deliver DNA to cells more effectively. Past studies demonstrate that these films can promote transgene expression in vitro and in vivo, but significant questions remain regarding roles that the cationic polymers could play in promoting the internalization and processing of DNA. Here, we report physicochemical and in vitro cell-based characterization of DNA-containing PEMs fabricated using fluorescently end-labeled derivatives of a degradable polycation (polymer 1) used in past studies of surface-mediated transfection. This approach permitted simultaneous characterization of polymer and DNA in solution and in cells using fluorescence-based techniques, and provided information about the locations and behaviors of polymer 1 that could not be obtained using other methods. LSCM and flow cytometry experiments revealed that polymer 1 and DNA released from film-coated objects were both internalized extensively by cells and that they were colocalized to a significant extent inside cells (e.g., ~58% of DNA was colocalized with polymer). Fluorescence anisotropy measurements of solutions containing partially eroded films were also consistent with the presence of aggregates of polymer 1 and DNA in solution (e.g., after release from surfaces, but prior to internalization by cells). Our results support the view that polymer 1, which is incorporated into these materials as "layers" rather than as part of optimized, preformed "polyplexes", can act to promote or enhance surface-mediated DNA delivery. More broadly, our results suggest opportunities to improve the delivery properties of DNA-containing PEMs by incorporation of additional "layers" of other conventional cationic polymers designed to address specific intracellular barriers to transfection, such as endosomal escape, more effectively.     

Effect of thiol pendant conjugates on plasmid DNA binding, release, and stability of polymeric delivery vectors

Polymers have attracted much attention as potential gene delivery vectors due to their chemical and structural versatility. However, several challenges associated with polymeric carriers, including low transfection efficiencies, insufficient cargo release, and high cytotoxicity levels have prevented clinical implementation. Strong electrostatic interactions between polymeric carriers and DNA cargo can prohibit complete cargo release within the cell. As a result, cargo DNA never reaches the cell's nucleus where gene expression takes place. In addition, highly charged cationic polymers have been correlated with high cytotoxicity levels, making them unsuitable carriers in vivo. Using poly(allylamine) (PAA) as a model, we investigated how pH-sensitive disulfide cross-linked polymer networks can improve the delivery potential of cationic polymer carriers. To accomplish this, we conjugated thiol-terminated pendant chains onto the primary amines of PAA using 2-iminothiolane, developing three new polymer vectors with 5, 13, or 20% thiol modification. Unmodified PAA and thiol-conjugated polymers were tested for their ability to bind and release plasmid DNA, their capacity to protect genetic cargo from enzymatic degradation, and their potential for endolysosomal escape. Our results demonstrate that polymer-plasmid complexes (polyplexes) formed by the 13% thiolated polymer demonstrate the greatest delivery potential. At high N/P ratios, all thiolated polymers (but not unmodified counterparts) were able to resist decomplexation in the presence of heparin, a negatively charged polysaccharide used to mimic in vivo polyplex-protein interactions. Further, all thiolated polymers exhibited higher buffering capacities than unmodified PAA and, therefore, have a greater potential for endolysosomal escape. However, 5 and 20% thiolated polymers exhibited poor DNA binding-release kinetics, making them unsuitable carriers for gene delivery. The 13% thiolated polymers, on the other hand, displayed high DNA binding efficiency and pH-sensitive release.     

Exploring polyethylenimine-mediated DNA transfection and the proton sponge hypothesis

BACKGROUND: The relatively high transfection efficiency of polyethylenimine (PEI) vectors has been hypothesized to be due to their ability to avoid trafficking to degradative lysosomes. According to the proton sponge hypothesis, the buffering capacity of PEI leads to osmotic swelling and rupture of endosomes, resulting in the release of the vector into the cytoplasm. METHODS: The mechanism of PEI-mediated DNA transfer was investigated using quantitative methods to study individual steps in the overall transfection process. In addition to transfection efficiency, the cellular uptake, local pH environment, and stability of vectors were analyzed. N-Quaternized (and therefore non-proton sponge) versions of PEI and specific cell function inhibitors were used to further probe the proton sponge hypothesis. RESULTS: Both N-quaternization and the use of bafilomycin A1 (a vacuolar proton pump inhibitor) reduced the transfection efficiency of PEI by approximately two orders of magnitude. Chloroquine, which buffers lysosomes, enhanced the transfection efficiency of N-quaternized PEIs and polylysine by 2-3-fold. In contrast, chloroquine did not improve the transfection efficiency of PEI. The measured average pH environment of PEI vectors was 6.1, indicating that they successfully avoid trafficking to acidic lysosomes. Significantly lower average pH environments were observed for permethyl-PEI (pH 5.4), perethyl-PEI (pH 5.1), and polylysine (pH 4.6) vectors. Cellular uptake levels of permethyl-PEI and perethyl-PEI vectors were found to be 20 and 90% higher, respectively, than that of parent PEI vectors, indicating that the reduction in transfection activity of the N-quaternized PEIs is due to a barrier downstream of cellular uptake. A polycation/DNA-binding affinity assessment showed that the more charge dense N-quaternized PEIs bind DNA less tightly than PEI, demonstrating that poor vector unpackaging was not responsible for the reduced transfection activity of the N-quaternized PEIs. CONCLUSIONS: The results obtained are consistent with the proton sponge hypothesis and strongly suggest that the transfection activity of PEI vectors is due to their unique ability to avoid acidic lysosomes.     

Arginine-rich cross-linking peptides with different SV40 nuclear localization signal content as vectors for intranuclear DNA delivery

The major barriers for intracellular DNA transportation by cationic polymers are their toxicity, poor endosomal escape and inefficient nuclear uptake. Therefore, we designed novel modular peptide-based carriers modified with SV40 nuclear localization signal (NLS). Core peptide consists of arginine, histidine and cysteine residues for DNA condensation, endosomal escape promotion and interpeptide cross-linking, respectively. We investigated three polyplexes with different NLS content (10?mol%, 50?mol% and 90?mol% of SV40 NLS) as vectors for intranuclear DNA delivery. All carriers tested were able to condense DNA, to protect it from DNAase I and were not toxic to the cells. We observed that cell cycle arrest by hydroxyurea did not affect transfection efficacy of NLS-modified carriers which we confirmed using quantitative confocal microscopy analysis. Overall, peptide carrier modified with 90?mol% of SV40 NLS provided efficient transfection and nuclear uptake in non-dividing cells. Thus, incorporation of NLS into arginine-rich cross-linking peptides is an adequate approach to the development of efficient intranuclear gene delivery vehicles.     

Synthesis and characterization of poly (amino ester) for slow biodegradable gene delivery vector

Many therapeutic carrier materials were exploited for human gene therapy from viral to polymeric vectors. This research describes the evaluation of two biodegradable ester-bonded polymers synthesized by double-monomer polycondensation for a non-viral cationic polymer-based gene delivery system. The backbone was constructed to include inner tertiary amines and outer primary amines. Self-assembly with DNA resulted in the production of regularly nano-sized spherical polyplexes with good transfection efficiency, especially in the presence of serum. The polymers showed a relatively slow degradability for an amine-containing ester polymer, as they maintained DNA/polymer complex for 7 days in physiological buffer conditions. Finally, the low toxicity and slow degradation concluded these polymers reliable for long-term therapeutic applications.     

Novel biodegradable poly(disulfide amine)s for gene delivery with high efficiency and low cytotoxicity

Novel biodegradable poly(disulfide amine)s with defined structure, high transfection efficiency, and low cytotoxicity were designed and synthesized as nonviral gene delivery carriers. Michael addition between N, N'-cystaminebisacrylamide (CBA) and three N-Boc protected diamines ( N-Boc-1,2-diaminoethane, N-Boc-1,4-diaminobutane, and N-Boc-1,6-diaminohexane) followed by N-Boc deprotection under acidic condition resulted in final cationic polymers with disulfide bonds, tertiary amine groups in main chains, and pendant primary amine groups in side chains. Polymer structures were confirmed by 1H NMR, and their molecular weights were in the range 3.3-4.7 kDa with narrow polydispersity (1.12-1.17) as determined by size exclusion chromatography (SEC). Acid-base titration assay showed that the poly(disulfide amine)s possessed superior buffering capacity to branched PEI 25 kDa in the pH range 7.4-5.1, which may facilitate the escape of DNA from the endosomal compartment. Gel retardation assay demonstrated that significant polyplex dissociation was observed in the presence of 5.0 mM DTT within 1 h, suggesting rapid DNA release in the reduction condition such as cytoplasm due to the cleavage of disulfide bonds. Genetic transfections mediated by these poly(disulfide amine)s were side-chain spacer length dependent. The poly(disulfide amine) with a hexaethylene spacer, poly(CBA-DAH), had comparable transfection efficiency to bPEI 25 kDa in the tested cell lines, i.e., 293T cells, Hela cells, and NIH3T3 cells. This same poly(disulfide amine) mediated 7-fold higher luciferase expression than bPEI 25 kDa in C2C12 cells (mouse myoblast cell line), a cell line difficult to transfect with many cationic polymers. Furthermore, MTT assay indicated that all three poly(disulfide amine)s/pDNA polyplexes were significantly less toxic than bPEI/pDNA complexes.     

Synthesis and in vitro evaluation of novel star-shaped block copolymers (blocked star vectors) for efficient gene delivery

Novel 4-branched diblock copolymers consisting of cationic chains as an inner domain and nonionic chains as an outer domain were prepared by iniferter-based living radial polymerization and evaluated as a polymeric transfectant. The cationic polymerization of 3-(N,N-dimethylamino)propyl acrylamide (DMAPAAm) using 1,2,4,5-tetrakis( N,N-diethyldithiocarbamylmethyl)benzene as a 4-functional iniferter followed by the nonionic block polymerization of N,N-dimethylacrylamide (DMAAm) afforded 4-branched diblock copolymers with controlled compositions. By changing the solution or irradiation conditions, 4-branched PDMAPAAms with molecular weights of 10,000, 20,000, and 50,000 were synthesized. In addition, by graft polymerization, PDMAPAAm-PDMAAm blocked copolymers with copolymer composition (unit ratio of DMAAm/DMAPAAm) ranging from 0.18 to 1.0 for each cationic polymer were synthesized. All polymers were shown to interact with and condense plasmid DNA to yield polymer/DNA complexes (polyplexes). A transfection study on COS-1 cells showed that the polyplexes from block copolymers with cationic chain length of approximately 50,000 and a nonionic chain length of 30,000, which were approximately 200 nm in diameter and very stable in aqueous media, had the most efficient luciferase activity with minimal cellular cytotoxicity under a charge ratio of 20 (vector/pDNA). The PDMAPAAm-PDMAAm-blocked, star-shaped polymers are an attractive novel class of nonviral gene delivery systems.     

Degradable-brushed pHEMA-pDMAEMA synthesized via ATRP and click chemistry for gene delivery

Brushed polymers composed of a backbone of poly(hydroxyethyl methacrylate) (pHEMA) onto which poly(2-(dimethylamino)ethyl methacrylate)s (pDMAEMAs) was grafted via a hydrolyzable linker were synthesized and evaluated as nonviral gene delivery vectors. Both pDMAEMA and pHEMA polymers with controlled molecular weights and narrow distributions were synthesized by controlled atom transfer radical polymerization (ATRP). The azide initiator was used to ensure complete and monoazide functionalization of the pDMAEMA polymer chains. Click reaction between pHEMA with alkyne side groups and the azide end group in the pDMAEMA resulted in a high-molecular-weight polymer composed of low-molecular-weight constituents via an easily degradable carbonate ester linker. The length of the pDMAEMA grafts as well as the number of grafts of the brushed pHEMA-pDMAEMA can be easily varied. At physiological conditions (pH 7.4 and 37 degrees C), the brushed polymer degraded by hydrolysis of the carbonate ester with a half-life of 96 h. The molecular weights of the formed degradation products was very close to that of the starting pDMAEMA, which is likely below the renal excretion limit (<30 kDa). It was shown that the degradable brushed pHEMA-pDMAEMAs were able to condense plasmid DNA into positively charged nanosized particles. The resulting polyplexes were able to transfect cells efficiently in the presence of the endosomal membrane disrupting INF-7 peptide, and all these degradable polymers showed lower cellular toxicity compared to a high-molecular-weight pDMAEMA reference. On the other hand, the low-molecular-weight pDMAEMA used for the grafting to pHEMA was neither able to condense the structure of DNA nor able to transfect cells. This study demonstrates that grafting a low-molecular-weight cationic polymer via a hydrolyzable linker to a neutral hydrophilic polymer is an effective approach to modulate the transfection activity and toxicity profile of gene delivery polymers.     

Novel bioreducible poly(amido amine)s for highly efficient gene delivery

A series of novel bioreducible poly(amido amine)s containing multiple disulfide linkages (SS-PAAs) were synthesized and evaluated as nonviral gene vectors. These linear SS-PAAs could be easily obtained by Michael-type polyaddition of various primary amines to the disulfide-containing cystamine bisacrylamide. The SS-PAA polymers are relatively stable in medium mimicking physiological conditions (pH 7.4, 150 mM PBS, 37 degrees C), but are rapidly degraded in the presence of 2.5 mM DTT, mimicking the intracellular reductive environment (pH 7.4, [R-SH] = 5 mM, 37 degrees C). The polymers efficiently condense DNA into nanoscaled (<200 nm) and positively charged (>+20 mV) polyplexes that are stable under neutral conditions but are rapidly destabilized in a reductive environment, as was revealed by both dynamic light scatting measurement and agarose gel assays. Moreover, most of the poly(amido amine)s possess buffer capacities in the pH range pH 7.4-5.1 that are even higher than polyethylenimine (pEI), a property that may favorably contribute to the endosomal escape of the polyplexes. Polyplexes of four of the seven SS-PAAs studied were able to transfect COS-7 cells in vitro with transfection efficiencies significantly higher than those of branched pEI, being one of the most effective polymeric gene carriers reported to date. Importantly, also in the presence of serum, a high level of gene expression could be observed when the incubation time was elongated from 1 h to 4 h. XTT assays showed that SS-PAAs and their polyplexes possess essentially no or only very low cytotoxicity at concentrations where the highest transfection activity is observed. The results indicate that bioreducible poly(amido amine)s have excellent properties for the development of highly potent and nontoxic polymeric gene carriers.     

Methacrylamide polymers with hydrolysis-sensitive cationic side groups as degradable gene carriers

Water-soluble polymers with hydrolyzable cationic side groups (structure of the monomers are shown in Figure 1) were synthesized and evaluated as DNA delivery systems. The polymers, except for pHPMA-NHEM, were able to condense plasmid DNA into positively charged nanosized particles. The rate of hydrolysis at 37 degrees C and pH 7.4 of the side groups differed widely; the fastest rate of hydrolysis was observed for HPMA-DEAE (half-life of 2 h), while HPMA-DMAPr had the lowest rate of hydrolysis (half-life of 70 h). In line with this, pHPMA-DEAE-based polyplexes showed the fastest destabilization of the polyplexes at 37 degrees C and pH 7.4. Polyplexes based on pHPMA-DEAE, pHPMA-DMAE, and pHPMA-MPPM showed release of intact DNA within 24, 48, and 48 h, respectively, after incubation at 37 degrees C and pH 7.4. PHPMA-DEAE and pHPMA-MPPM based polyplexes showed the highest transfection activity (almost twice as active as pEI). Importantly, the pHPMA-DEAE, pHPMA-MPPM, and pHPMA-BDMPAP polyplexes preserved their transfection activity in the presence of serum proteins. All polymers investigated showed a substantial lower in vitro cytotoxicity than pEI. In conclusion, pHPMA-based polyplexes are an attractive class of biodegradable vectors for nonviral gene delivery.     

Optimal transfection with the HK polymer depends on its degree of branching and the pH of endocytic vesicles

We have recently reported that liposomes in combination with histidine (HK)-containing polymers enhanced the expression of luciferase in transfected cells. In transformed or malignant cell lines, branched HK polymers (combined with liposome carriers) were significantly more effective than the linear HK polymer in stimulating gene expression. In the current study, we found that the linear HK polymer enhanced gene expression in primary cell lines more effectively than the branched polymers. The differences in the optimal carrier (linear versus branched) were not due to initial cellular uptake, size of the complexes or level of gene expression. There was, however, a strong association between the optimal type of HK polymer and the pH of endocytic vesicles (P = 0.0058). By altering the percentage of histidines carrying a positive charge, the endosomal pH of a cell may determine the amount of DNA released from the linear or branched HK polymer. In the two cell lines in which the linear HK was the optimal polymer, the endocytic vesicles were strongly acidic with a pH of <5.0. Conversely, in the four cell lines in which the branched polymers were optimal transfection agents, the pH of endocytic vesicles was >6.0. Furthermore, binding data support the relationship between DNA release from the optimal HK polymer and endosomal pH. The interplay between optimal HK polymers and the endosomal pH may lead to improved gene-delivery polymers tailored to a particular cell.     

Influence of chitosan structure on the formation and stability of DNA-chitosan polyelectrolyte complexes

The interactions between DNA and chitosans varying in fractional content of acetylated units (FA), degree of polymerization (DP), and degree of ionization were investigated by several techniques, including an ethidium bromide (EtBr) fluorescence assay, gel retardation, atomic force microscopy, and dynamic and electrophoretic light scattering. The charge density of the chitosan and the number of charges per chain were found to be the dominating factors for the structure and stability of DNA-chitosan complexes. All high molecular weight chitosans condensed DNA into physically stable polyplexes; however, the properties of the complexes were strongly dependent on FA, and thereby the charge density of chitosan. By employing fully charged oligomers of constant charge density, it was shown that the complexation of DNA and stability of the polyplexes is governed by the number of cationic residues per chain. A minimum of 6-9 positive charges appeared necessary to provide interaction strength comparable to that of polycations. In contrast, further increase in the number of charges above 9 did not increase the apparent binding affinity as judged from the EtBr displacement assay. The chitosan oligomers exhibited a pH-dependent interaction with DNA, reflecting the number of ionized amino groups. The complexation of DNA and the stability of oligomer-based polyplexes became reduced above pH 7.4. Such pH-dependent dissociation of polyplexes around the physiological pH is highly relevant in gene delivery applications and might be one of the reasons for the high transfection activity of oligomer-based polyplexes observed.     

Exogenous chondroitin sulfate glycosaminoglycan associate with arginine-rich peptide–DNA complexes to alter their intracellular processing and gene delivery efficiency

Arginine-rich peptides have been used extensively as efficient cellular transporters. However, gene delivery with such peptides requires development of strategies to improve their efficiency. We had earlier demonstrated that addition of small amounts of exogenous glycosaminoglycans (GAGs) like heparan sulfate or chondroitin sulfate to different arginine-rich peptide–DNA complexes (polyplexes) led to an increase in their gene delivery efficiency. This was possibly due to the formation of a ‘GAG coat’ on the polyplex surface through electrostatic interactions which improved their extracellular stability and subsequent cellular entry. In this report, we have attempted to elucidate the differences in intracellular processing of the chondroitin sulfate (CS)-coated polyplexes in comparison to the native polyplexes by using a combination of endocytic inhibitors and co-localization with endosomal markers in various cell lines. We observed that both the native and CS-coated polyplexes are internalized by multiple endocytic pathways although in some cell lines, the coated polyplexes are taken up primarily by caveolae mediated endocytosis. In addition, the CS-coat improves the endosomal escape of the polyplexes as compared to the native polyplexes. Interestingly, during these intracellular events, exogenous CS is retained with the polyplexes until their accumulation near the nucleus. Thus we show for the first time that exogenous GAGs in small amounts improve intracellular routing and nuclear accumulation of arginine-based polyplexes. Therefore, addition of exogenous GAGs is a promising strategy to enhance the transfection efficiency of cationic arginine-rich peptides in multiple cell types.     

Efficient gene transfer by histidylated polylysine/pDNA complexes.

Plasmid/polylysine complexes, which are used to transfect mammalian cells, increase the uptake of DNA, but plasmid molecules are sequestered into vesicles where they cannot escape to reach the nuclear machinery. However, the transfection efficiency increases when membrane-disrupting reagents such as chloroquine or fusogenic peptides, are used to disrupt endosomal membranes and to favor the delivery of plasmid into the cytosol. We designed a cationic polymer that forms complexes with a plasmid DNA (pDNA) and mediates the transfection of various cell lines in the absence of chloroquine or fusogenic peptides. This polymer is a polylysine (average degree of polymerization of 190) partially substituted with histidyl residues which become cationic upon protonation of the imidazole groups at pH below 6.0. The transfection efficiency was optimal with a polylysine having 38 +/- 5% of the epsilon-amino groups substituted with histidyl residues; it was not significantly impaired in the presence of serum in the culture medium. The transfection was drastically inhibited in the presence of bafilomycin A1, indicating that the protonation of the imidazole groups in the endosome lumen might favor the delivery of pDNA into the cytosol.