Spectrophotometric assay of immobilized tannase

A procedure for the assay of immobilized tannase with Polyacrylamide gel, collagen and Duolite-S-762 as matrices is described. It is based on the spectrophotometric determination of gallic acid formed by the enzymatic hydrolysis of tannic acid. The kinetic parameters of the enzymatic reaction have been studied and an assay procedure has been formulated. This method appears to be much more accurate than those reported earlier.     

Immobilization of cross-linked tannase enzyme on multiwalled carbon nanotubes and its catalytic behavior

Immobilization of cross-linked tannase on pristine multiwalled carbon nanotubes (MWCNT) was successfully performed. Cross-linking of tannase molecules was made through glutaraldehyde. The immobilized tannase exhibited significantly improved pH, thermal, and recycling stability. The optimal pH for both free and immobilized tannase was observed at pH 5.0 with optimal operating temperature at 30°C. Moreover, immobilized enzyme retained greater biocatalytic activities upon 10 repeated uses compared to free enzyme in solution. Immobilization of tannase was accomplished by strong hydrophobic interaction most likely between hydrophobic amino acid moieties of the glutaraldehyde-cross-linked tannase to the MWCNT.     

反胶束中单宁酶的光学行为和稳定性

为了测定反胶束系统中单宁酶的光学行为和增溶方式,采用紫外分光光度法和荧光扫描技术对AOT水／异辛烷组成的反胶束体系中单宁酶和水相中单宁酶的光学行为进行研究,同时研究了不同反应体系中单宁酶的稳定性,并对单宁酶在反胶束体系中的增溶方式进行探讨。结果表明：反胶束体系与水相中的单宁酶,其光学行为存在很大差别。反胶束体系有利于单宁酶的稳定,脂肪醇作为反应底物,其碳链的增长有利于单宁酶在反胶束中的稳定性。单宁酶是以嵌入反胶束膜或与反胶束内膜接触的方式增溶的。     

Crystallographic and mutational analyses of tannase from Lactobacillus plantarum

Tannin acylhydrolase (EC 3.1.1.20) referred commonly as tannase catalyzes the hydrolysis of the galloyl ester bond of tannins to release gallic acid. Although the enzyme is useful for various industries, the tertiary structure is not yet determined. In this study, we determined the crystal structure of tannase produced by Lactobacillus plantarum. The tannase structure belongs to a member of α/β‐hydrolase superfamily with an additional “lid” domain. A glycerol molecule derived from cryoprotectant solution was accommodated into the tannase active site. The binding manner of glycerol to tannase seems to be similar to that of the galloyl moiety in the substrate. Proteins 2013; 81:2052–2058. © 2013 Wiley Periodicals, Inc.     

反胶束中单宁酶催化没食子酸烷基酯的生物合成

为了研究单宁酶在有机相中的催化性能,建立了AOT/异辛烷／水反胶束单宁酶催化没食子酸与脂肪醇酯合成反应体系。结果显示：反胶束单宁酶催化体系可成功催化合成C3-C5脂肪醇与没食子酸的酯合成反应。不同反应体系中由于不同脂肪醇的存在,单宁酶的动力学参数和紫外光谱存在差别。结果表明单宁酶对脂肪醇的专一性不强,根据Vmax/Km比值,丁醇与异丁醇是其最适底物,单宁酶催化没食子酸烷基酯合成的动力学符合米氏方程。反应体系中不同的脂肪醇导致了单宁酶构象的差别。     

Enhancement of transesterification-catalyzing capability of bio-imprinted tannase in organic solvents by cryogenic protection and immobilization

Improvement of transesterification-catalyzing capability of bio-imprinted tannase is a crucial question of whether to be efficiently utilized in organic media. As for biotransformation of tannic acid to propyl gallate, bio-imprinting technique can dramatically enhance the transesterification-catalyzing capability of tannase. In this work, both cryogenic protection and immobilization were utilized to further improve its apparent catalytic capability in organic media. The results show that Triton-X-100, mannose, and magnesium ion all have a positive effect on cryogenic protection of the tannase. Particularly, combinational application of the three cryoprotectants increases its catalytic performance by 2.7-fold factor. Also, immobilization further elevates its catalytic capability by 2.1 folds. Noteworthily, the coupling application of immobilization and cryo-protection can cause the conversion rate of substrate of the bio-imprinted tannase to increase to a promising 70%. Consequently, it will be helpful to fully utilize tannase in organic phase.     

Catechine biotransformation by tannase with sequential addition of substrate

This work studied the effect of a sequential addition of substrate on tannase reaction for the increase of epigallocatechin (EGC) and gallic acid. The addition of 0.5–1% GTE increased the production of gallic acid during 2 h in a single tannase reaction, while the addition of more than 2% in GTE rather showed a decrease in gallic acid level with an increase of EGCG level compared with 1% GTE addition group, suggesting that GTE addition of 2% and over inhibits the reaction of tannase. Examination of sequential addition of 1% GTE on tannase reaction showed that second addition of 1% GTE at 2 h promoted tannase reaction by increasing production of gallic acid, but further addition (2 and 3 h) rather inhibited tannase reaction with lowered gallic acid and enhanced EGCG levels. This result showed that one additional treatment of 1% GTE during tannase reaction is effective in an increase of gallic acid production. Moreover, levels of degallated products including EGC, EC, and GC were increased by 7.3, 4.5, and 3.5-fold, respectively in sequential addition of GTE at 2 h. pH change derived from gallic acid production was not shown to related to tannase activity. Therefore, our study suggests that one sequential addition is a suitable process for desirable production of green tea extracts enriched in active components such as gallic acid and EGC.     

Optimization of tannase production by Aureobasidium pullulans DBS66

Tannase production by Aureobasidium pullulans DBS66 was optimized. The organism produced maximum tannase in the presence of 1% tannic acid after 36 h. Maximum gallic acid accumulation was observed within 36 h and tannic acid in the fermented broth was completely degraded after 42 h of growth. Glucose had a stimulatory effect on tannase synthesis at 0.1% (w/v) concentration. The organism showed maximum tannase production with (NH4)2HPO4 as nitrogen source. Shaking speed of 120 rpm and 50-ml broth volume have been found to be suitable for maximum tannase production.     

Secretion, purification, and characterization of a recombinant Aspergillus oryzae tannase in Pichia pastoris

Tannase (tannin acyl hydrolase) is an industrially important enzyme produced by a large number of fungi, which hydrolyzes the ester and depside bonds of gallotannins and gallic acid esters. In the present work, a tannase from Aspergillus oryzae has been cloned and expressed in Pichia pastoris. The catalytic activity of the recombinant enzyme was assayed. A secretory form of enzyme was made with the aid of Saccharomyces cerevisiae alpha-factor, and a simple procedure purification protocol yielded tannase in pure form. The productivity of secreted tannase achieved 7000 IU/L by fed-batch culture. Recombinant tannase had a molecular mass of 90 kDa, which consisted of two kinds of subunits linked by a disulfide bond(s). Our study is the first report on the heterologous expression of tannase suggesting that the P. pastoris system represents an attractive means of generating large quantities of tannase for both research and industrial purpose.     

单宁酶基因在黑曲霉ST31中的克隆与表达

利用PCR扩增得到米曲霉(Aspergillusoryzae)单宁酶(tannase)基因的编码序列,经DNA测序证实单宁酶基因已成功克隆,然后将其连接到黑曲霉的表达载体ANED2-SP2上构建单宁酶基因表达载体。将构建好的单宁酶基因表达载体通过原生质转化法导入黑曲霉菌株ST31中进行表达研究。结果表明重组菌株的单宁酶活力最高为104.02U/ml发酵液,比原始出发菌株米曲霉提高2~3倍。研究构建了黑曲霉的高效转化体系,提高了黑曲霉表达系统的应用水平,为其它新酶的研究提供有价值的参考。     

从黑茶中分离和筛选产单宁酶菌株

茶叶中富含单宁化合物。从分离自黑茶的真菌菌株中,筛选高产单宁酶的菌株;进而分离纯化单宁酶,分析单宁酶对茶汤的转溶效果。从不同产地的3个黑茶样品中,共分离获得44个真菌分离物;经初步鉴定,这些真菌分离物以曲霉属（Aspergillus）、青霉属（Penicillium）和散囊菌属（Eurotium）的真菌居多。以单宁酸为底物的鉴别培养基初筛表明,其中26个真菌分离物在鉴别平板上产生透明圈,显示单宁水解酶活性;通过固体发酵复筛,筛选到1株产单宁酶活性较高的菌株,初步鉴定为青霉属（Penicillium）菌株,命名为青霉MP-24菌株。青霉MP-24可以以茶叶、茶梗和麸皮等农副产品作为原料固体发酵产生单宁酶。以麸皮为原料的发酵产物经过硫酸铵分级沉淀、DEAE阴离子交换层析和葡聚糖G-150凝胶层析等分离纯化步骤,得到分子量为70 kDa的单一蛋白质条带,单宁酶活力达到603.68 U/mg。纯化获得的单宁酶对茶汤有良好的转溶效果。研究结果表明,在黑茶相关微生物中含有丰富的产单宁酶菌株,是工业酶制剂的重要资源。     

Production of tannase by the immobilized cells of Bacillus licheniformis KBR6 in Ca-alginate beads

AIMS: The present study was aimed at finding the optimal conditions for immobilization of Bacillus licheniformis KBR6 cells in calcium-alginate (Ca-alginate) beads and determining the operational stability during the production of tannin-acyl-hydrolase (tannase) under semicontinous cultivation. METHODS AND RESULTS: The active cells of B. licheniformis KBR6 were immobilized in Ca-alginate and used for the production of tannase. The influence of alginate concentration (5, 10, 20 and 30 g l(-1)) and initial cell loading on enzyme production were studied. The production of tannase increased significantly with increasing alginate concentration and reached a maximum enzyme yield of 0.56 +/- 0.03 U ml(-1) at 20 g l(-1). This was about 1.70-fold higher than that obtained by free cells. The immobilized cells produced tannase consistently over 13 repeated cycles and reached a maximum level at the third cycle. Scanning electron microscope study indicated that the cells in Ca-alginate beads remain in normal shape. CONCLUSIONS: The Ca-alginate entrapment is a promising immobilization method of B. licheniformis KBR6 for repeated tannase production. Tannase production by immobilized cells is superior to that of free cells because it leads to higher volumetric activities within the same period of fermentation. SIGNIFICANCE AND IMPACT OF THE STUDY: This is the first report of tannase production from immobilized bacterial cells. The bacterium under study can produce higher amounts of tannase with respect to other fungal strains within a short cultivation period.     

Distribution of tannic acid degrading microorganisms in the soil and comparative study of tannase from two fungal strains

A quantitative survey on microbial population including tannase producing organisms have been made from different soil samples. Most of the samples harbour negligible number of tannase producers in comparison to total microbial flora. Among the tannase producers, fungal members are more frequent than bacteria. Tannase production and tannic acid degradation have been studied in two newly isolated potent fungal strains. Both the strains produce maximum tannase at their stationary phases of growth. Enzymes produced by both the strains remain active within pH 3.5-6.0 and temperature 30-60 degrees C.     

Tannase production by Paecilomyces variotii

Surface response methodology was applied to the optimization of the laboratory scale production of tannase using a lineage of Paecilomyces variotii. A preliminary study was conducted to evaluate the effects of variables, including temperature ( degrees C), residue (%) (coffee husk:wheat bran), tannic acid (%) and salt solutions (%) on the production of tannase during 3, 5 and 7 days of fermentation. Among these variables, temperature, residues and tannic acid had significant effects on tannase production. The variables were optimized using surface response methodology. The best conditions for tannase production were: temperature (29-34 degrees C); tannic acid (8.5-14%); % residue (coffee husk:wheat bran 50:50) and incubation time of 5 days. The supplementation of external nitrogen and carbon sources at 0.4%, 0.8% and 1.2% concentration on tannase production were studied in the optimized medium. Three different nitrogen sources included yeast extract, ammonia nitrate and sodium nitrate along with carbon source (starch) were studied. Only ammonia nitrate showed a significant effect on tannase production. After the optimization process, the tannase activity increased 8.6-fold.     

Expression of Aspergillus niger N5-5 in E. coli and purification and identification of products

Due to the feature of high hydrolysis, tannase is widely used in food, beverage, brewing and other fields. However, high cost in producing natural tannase makes it difficult to apply tannase to industry in a large-scale. Microbial expression systems can be used for preparing numerous amount of enzyme at low cost, so in this paper Aspergillus niger N5-5 was expressed using E. coli system. Specific primers were designed based on the Aspergillus niger N5-5 sequence N3 (GenBank, No.: KP677552), and tannase gene tan was promoted to carry 6 His tag and enzyme cutting site which contains NdeI/HindIII using PCR amplification. Then, tannase gene tan was connected to expression vector by NdeI/HindIII enzyme cutting. In this way, recombinant expression vector tan-pET43.1a was formed. Then, the expression vector pET43.1a by NdeI/HindIII enzyme cutting was transformed into E. coli BL21 (DE3) to induce expression of Aspergillus niger N5-5. When the induced fungi were disrupted by the ultrasonic wave, the crude enzyme was extracted and purified by using the IMAC, and then the activity of the crude enzyme and pure enzyme was determined. According to the results of determination of the tannase activity, the tannase activity of the crude enzyme was greatly improved after the crude enzyme was purified, and the specific activity of the pure enzyme was about 8 times of that of the crude enzyme. The results of SDS-PAGE of the pure enzyme showed that the molecular mass of the pure enzyme was about 65 kDa/64–65 kDa, which was consistent with the expected result (64.2 kDa), It can be concluded that the crude enzyme solution was purified successfully. The results of pure enzyme’s protein identification by Western Blotting showed that clear protein bands pro-3 were observed. Molecular mass of clear protein bands pro-3 was about 65 kDa, which was in line with the expected results (64.2 kDa). It can be seen that the aforementioned expression protein could be specifically combined with His tag. It proved expression protein to be a recombinant fusion protein with 6 His tag.     

黑曲霉B0201利用五倍子固体发酵产单宁酶的条件研究

通过比较常规灭菌发酵和生料发酵, 研究黑曲霉B0201利用五倍子固体发酵产单宁酶的条件。结果表明, 在生料发酵过程中, 采用20%五倍子并且以(NH4)2SO4为氮源制备单宁酶的最佳条件为: 液固比=1.6:1、温度30°C、初始pH 6.0。在该条件下通过96 h的培养, 单宁酶的活力可达51.2 U/gds, 是常规灭菌发酵的3.6倍。以上结果显示, 生料发酵生产单宁酶是一种高效可行的方法。     

Optimization of cultural conditions for tannase production by Pseudomonas aeruginosa IIIB 8914 under submerged fermentation

A tannase yielding bacterial strain was isolated from soil sample collected from the area situated nearby small-scale tannery. It was identified as Pseudomonas aeruginosa IIIB 8914. The bacterial strain produced extra-cellular tannase under sub-merged fermentation (Smf) using amla (Phyllanthus emblica), keekar (Acacia nilotica), jamoa (Eugenia cuspidate) and jamun (Syzygium cumini) leaves. Among different substrates, amla and keekar leaves resulted in maximal extra-cellular production of tannase. Various process parameters were studied to optimize the extra-cellular yield of tannase under Smf. Maximum yield of tannase i.e., 13.65 and 12.90 U/ml was obtained when Smf was carried out using amla and keekar leaves (2% w/v) respectively in minimal media supplemented with MgSO₄·7H₂O (amla)/HgCl₂ (keekar), NH₄NO₃ and 0.2% Tween 80; inoculated with 2% cell suspension, and incubated at 37°C for 24 h. The bacterial strain produced about 2 times (13.65 U/ml) higher yield of tannase than the highest reported yield of tannase (6 U/ml). Our finding suggests that agro residues in the form of amla and keekar leaves can be one of the best and cost effective alternatives to the costly pure tannic acid for industrial production of microbial tannase.     

Purification,structural characterization and biotechnological potential of tannase enzyme produced by Enterobacter cloacae strain 41

Tannase production by Enterobacter cloacae strain 41 was investigated under submerged fermentation which was optimized at various circumstances such as pH, temperature, substrate, and agitation, carbon, and nitrogen sources. Tannase was purified by a two-step approach comprising of ion exchange and size exclusion chromatography, respectively. The maximum tannase production was achieved at 1.0% tannic acid concentration, incubation temperature of 50 °C, and initial pH 6.0. The molecular weight of purified tannase was 45 kDa on 10% SDS-PAGE, and it was confirmed by matrix-assisted laser desorption ionization-time of flight (MALDI-TOF) mass spectrometry (MS). The enzymatic products of purified tannase were characterized by HPLC, TLC and FT-IR spectroscopy which showed the functional groups such as OH, CO, and CC. The purified tannase retained the activity up to 90% under the condition at 50 °C and pH 6.0 after 1 h incubation. Enzyme kinetics and inhibition studies were also investigated. Cytotoxicity studies showed that the tannase has no cytotoxic effects on Vero cell line. The results indicated the E. cloacae strain 41 would give a potential source for the efficient production of tannase and can be used in tannery effluent degradation, food, and pharmaceutical industrial applications.     

Optimisation of extracellular tannase production from <Emphasis Type="Italic">Paecilomyces variotii</Emphasis>

The tannase production by Paecilomyces variotii was confirmed by high performance thin layer chromatography (HPTLC), and substrate specificity of the tannase was determined by zymogram analysis in sodium dodecyl sulphate-polyacrylamide gel electrophoresis (SDS–PAGE). A clear band of activity observed after electrophoresis of culture filtrate in non-denaturing gels indicated the production of extracellular tannase by P. varoitii. HPTLC analysis revealed that gallic acid was the enzymatic degradation product of tannic acid during the fermentation process. The optimum condition for tannase production was at 72 h of incubation in shaking condition and addition of 1.5% tannic acid, 1% glucose and 0.2% sodium nitrate at temperature of 35°C and pH of 5–7. The production of extracellular tannase from Paecilomyces variotii was investigated under optimized conditions in solid-state fermentation (SSF), submerged fermentation (SmF) and liquid surface fermentation (LSF) processes. The maximum extracellular tannase production was obtained within 60 h of incubation under SSF followed by SmF and LSF.     

The esterase and depsidase activities of tannase

The esterase and depsidase activities of tannase have been examined by kinetic methods. Although the esterase/depsidase ratio of tannase may be varied by cultural methods and isolation procedures, evidence has been obtained to show that tannase, esterase and depsidase are enzymes with low specificities capable of hydrolysing both esters and depsides of gallic acid.