Synthesis of hyaluronan haloacetates and biology of novel cross-linker-free synthetic extracellular matrix hydrogels

Hyaluronan (HA) derivatives containing thiol-reactive electrophilic esters were prepared to react with thiol-modified macromolecules to give cross-linker-free hydrogels. Specifically, HA was converted to two haloacetate derivatives, HA bromoacetate (HABA) and HA iodoacetate (HAIA). In cytotoxicity assays, these reactive macromolecules predictably induced cell death in a dose-dependent manner. Cross-linker-free synthetic extracellular matrix (sECM) hydrogels were prepared by thiol alkylation using HAIA and HABA as polyvalent electrophiles and thiol-modified HA (CMHA-S) with or without thiol-modified gelatin (Gtn-DTPH) as polyvalent nucleophiles. When primary human fibroblasts were seeded on the surface of the sECMs containing only the electrophilic HA haloacetate and nucleophilic CMHA-S components, no significant cytoadherence was observed. Cell attachment and viability was 17% (HABA) to 30% (HAIA) lower on HA haloacetate cross-linked hydrogels than on CMHA-S that had been oxidatively cross-linked via disulfide-bonds. In contrast, sECMs that included Gtn-DTPH allowed fibroblasts to attach, spread, and proliferate. Taken together, the HA haloacetates are attractive candidates for producing cross-linker-free sECM biomaterials that can function either as anti-adhesive barriers or as cytoadhesive sECMs for cell culture in pseudo-3-D.     

Solubilization and deaggregation of cobalt bis(dicarbollide) derivatives in water by biocompatible excipients

In the field of medicinal chemistry, cobalt bis(dicarbollide) derivatives are promising therapeutic agents. The potential pharmaceutical utilization of metallacarboranes is complicated due to spontaneous self-assembling in water. This problem can be solved by using suitable deaggregating agent. We present here the comprehensive screen of substituted cobalt bis(dicarbollide) derivatives with cyclodextrin derivatives, classical surfactants and amphiphilic copolymers to find general biocompatible excipients. Preliminary results are obtained by using UV/Vis spectroscopy as the technique with the best ratio of applicable information to time and source dependence.     

Relationship between the structure of amphiphilic copolymers and their ability to disturb lipid bilayers

Nonionic amphiphiles and particularly block copolymers of ethylene oxide and propylene oxide (Pluronics) cause pronounced chemosensitization of tumor cells that exhibit multiple resistance to antineoplastic drugs. This effect is due to inhibition of P-glycoprotein (P-gp) responsible for drug efflux. It was suggested that the inhibition of P-gp might be due to changes in its lipid surrounding. Indeed, high dependence of P-gp activity on the membrane microviscosity was demonstrated [Regev et al. (1999) Eur. J. Biochem. 259, 18-24], suggesting that the ability of Pluronics to affect the P-gp activity is mediated by their effect on the membrane structure. We have found recently that adsorption of Pluronics on lipid bilayers induced considerable disturbance of the lipid packing [Krylova et al. (2003) Chemistry 9, 3930-3936]. In the present paper, we studied 19 amphiphilic copolymers, including newly synthesized hyperbranched polyglycerols, Pluronic and Brij surfactants, for their ability to accelerate flip-flop and permeation of antitumor drug doxorubicin (DOX) in liposomes. It was found that not only bulk hydrophobicity but also the chemical microstructure of the copolymer determines its membrane disturbing ability. Copolymers containing polypropylene oxide caused higher acceleration of flip-flop and DOX permeation than polysurfactants containing aliphatic chains. The effects of copolymers containing hyperbranched polyglycerol "corona" were more pronounced, as compared to the copolymers with linear poly(ethylene oxide) chains, indicating that a bulky hydrophilic block induces additional disturbances in the lipid bilayer. A good correlation between the copolymer flippase activity and a linear combination of copolymer bulk hydrophobicity and the van der Waals volume of its hydrophobic block was found. The relationship between the structure of a copolymer and its ability to disturb lipid membranes presented in this paper may be useful for the design of novel amphiphilic copolymers capable of affecting the activity of membrane transporters in living cells.     

Synthesis and characterization of PCL-b-PEO-b-PCL-based nanostructured and porous hydrogels

Hydrogels with nanoscale structure were synthesized using amphiphilic poly(epsilon-caprolactone)-poly(ethylene oxide)-poly(epsilon-caprolactone) (PCL-b-PEO-b-PCL) triblock copolymers. Small-angle X-ray scattering (SAXS) studies show that the block copolymers form 30-40 nm structures in aqueous solution and that these patterns are retained, with some increase in length scale, following electron beam cross-linking. Lamellar nanostructures were observed by SAXS and atomic force microscopy (AFM), with SAXS indicating cylindrical structure as the block lengths become more different in length. It is demonstrated through Fourier transform infrared spectroscopy (FTIR), mass loss, and differential scanning calorimetry (DSC) that the PCL can be completely removed by hydrolysis in NaOH(aq) to form porous PEO hydrogels. These hydrogels retain active functional groups following PCL removal that serve as sites for further chemical modification.     

New anionic crosslinked multi-responsive pullulan hydrogels

The paper studies the synthesis and characterization of anionic thermoassociative carboxymethylpullulan hydrogels through crosslinking of carboxymethylpullulan with two difunctional Jeffamines: ED-600 and ED-2003; taking into account that the Jeffamines contain polyoxyalkyleneamines (polyethylene oxide, polypropylene oxide) backbone with thermoassociative properties, is expected that the polysaccharide-Jeffamine derivatives also possess amphiphilic and thermosensitive characteristics. The hydrogels were characterized through FTIR spectra, swelling behavior in various media, at various pH or temperatures, retention of hydrophobic molecules, to appreciate their polyelectrolyte and thermoassociative properties. The interaction with biomolecules as proteins: lysozyme and BSA and as antioxidants: lutein was studied to estimate some potential application domains of these newly synthesized hydrogels.     

Reductive alkylation of hyaluronic acid for the synthesis of biocompatible hydrogels by click chemistry

Hyaluronan (HA) based hydrogels have been synthesized combining chemical modification of the polysaccharide by partial oxidation, reductive amination and 'click chemistry'. HA was oxidized by 4-acetamido-TEMPO-mediated reaction, using sodium hypochlorite as primary oxidant and NaBr in buffered pH, so that the produced aldehyde moieties (hemiacetals) were trapped in situ by adding primary amines containing azide or alkyne-terminal groups. The structure of the reaction products, oxidized-HA and primary amines bonded to HA, was elucidated using 2D NMR spectroscopy. SEC-MALLS analysis of the modified substrates showed a negligible degradation of the polysaccharide using this procedure. Furthermore, azido- and alkynyl derivatives underwent cross-linking by click chemistry into hydrogels, which were characterized by NMR, FT-IR, swelling degree and mechanical properties. Possible application of the material as scaffold for tissue engineering was tested by seeding and proliferation of chondrocytes for up to 15 days.     

Amphiphilic block copolymers enhance cellular uptake and nuclear entry of polyplex-delivered DNA

This work for the first time demonstrates that synthetic polymers enhance uptake and nuclear import of plasmid DNA (pDNA) through the activation of cellular trafficking machinery. Nonionic block copolymers of poly(ethylene oxide) and poly(propylene oxide), Pluronics, are widely used as excipients in pharmaceutics. We previously demonstrated that Pluronics increase the phosphorylation of IkappaB and subsequent NFkappaB nuclear localization as well as upregulate numerous NFkappaB-related genes. In this study, we show that Pluronics enhance gene transfer by pDNA/polycation complexes ("polyplexes") in a promoter-dependent fashion. Addition of Pluronic P123 or P85 to polyethyleneimine-based polyplexes had little effect on polyplex particle size but significantly enhanced pDNA cellular uptake, nuclear translocation, and gene expression in several cell lines. When added to polyplex-transfected cells after transfection, Pluronics enhanced nuclear import of pDNA containing NFkappaB binding sites, but have no effect on import of pDNA without these sites. Altogether, our studies suggest that Pluronics rapidly activate NFkappaB, which binds cytosolic pDNA that possesses promoters containing NFkappaB binding sites and consequently increase nuclear import of pDNA through NFkappaB nuclear translocation.     

Supramolecular hydrogels formed from biodegradable ternary COS-g-PCL-b-MPEG copolymer with α-cyclodextrin and their drug release

On the basis of the synthesis of novel biodegradable amphiphilic MPEG-b-PCL-grafted chitooligosaccharide (COS-g-PCL-b-MPEG) copolymers, supramolecular hydrogels were fabricated rapidly via their inclusion complexation with α-cyclodextrin (α-CD) in aqueous solutions. The graft copolymers were characterized by ¹H NMR spectroscopy, gel permeation chromatography (GPC), and fluorescence measurement, and the supramolecular structure of the resultant hydrogels was confirmed by X-ray diffraction measurements. Rheological studies of as-obtained hydrogels indicate that the physical properties could be modulated by controlling the concentration and the graft content of the graft copolymers as well as the molar feed ratio of the graft to α-CD. The in vitro release kinetics studies of bovine serum albumin (BSA) entrapped in the hydrogels show that the drug release profiles are dependent on the supramolecular hydrogel compositions.     

Reversible hydrogels from self-assembling genetically engineered protein block copolymers

A series of triblock protein copolymers composed of a central water-soluble polyelectrolyte segment flanked by two coiled-coil domains was synthesized by genetic engineering methods. The copolymers self-assembled into reversible hydrogels in response to changes in temperature, pH, and the presence or absence of denaturating agent (guanidine hydrochloride, GdnHCl). Hydrogel formation was concentration-dependent, and the concentration needed for hydrogel formation correlated with the oligomerization state of the coiled-coil domains in the protein copolymers. The morphology of the hydrogels, as determined by scanning electron microscopy (SEM), indicated the presence of porous interconnected networks. The thermal stabilities and self-assembling properties of the protein copolymers were successfully controlled by manipulating the amino acid sequences of the coiled-coil domains. The stimuli responsiveness and reversibility of the hydrogel self-assembly suggest that these protein copolymers may have potential in biomedical applications.     

Synthesis of amphiphilic tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization directly initiating from cyclic precursors and their application as drug nanocarriers

We report on the facile synthesis of well-defined amphiphilic and thermoresponsive tadpole-shaped linear-cyclic diblock copolymers via ring-opening polymerization (ROP) directly initiating from cyclic precursors, their self-assembling behavior in aqueous solution, and the application of micellar assemblies as controlled release drug nanocarriers. Starting from a trifunctional core molecule containing alkynyl, hydroxyl, and bromine moieties, alkynyl-(OH)-Br, macrocyclic poly(N-isopropylacrylamide) (c-PNIPAM) bearing a single hydroxyl functionality was prepared by atom transfer radical polymerization (ATRP), the subsequent end group transformation into azide functionality, and finally the intramacromolecular ring closure reaction via click chemistry. The target amphiphilic tadpole-shaped linear-cyclic diblock copolymer, (c-PNIPAM)-b-PCL, was then synthesized via the ROP of ε-caprolactone (CL) by directly initiating from the cyclic precursor. In aqueous solution at 20 °C, (c-PNIPAM)-b-PCL self-assembles into spherical micelles consisting of hydrophobic PCL cores and well-solvated coronas of cyclic PNIPAM segments. For comparison, linear diblock copolymer with comparable molecular weight and composition, (l-PNIPAM)-b-PCL, was also synthesized. It was found that the thermoresponsive coronas of micelles self-assembled from (c-PNIPAM)-b-PCL exhibit thermoinduced collapse and aggregation at a lower critical thermal phase transition temperature (T(c)) compared with those of (l-PNIPAM)-b-PCL. Temperature-dependent drug release profiles from the two types of micelles of (c-PNIPAM)-b-PCL and (l-PNIPAM)-b-PCL loaded with doxorubicin (Dox) were measured, and the underlying mechanism for the observed difference in releasing properties was proposed. Moreover, MTT assays revealed that micelles of (c-PNIPAM)-b-PCL are almost noncytotoxic up to a concentration of 1.0 g/L, whereas at the same polymer concentration, micelles loaded with Dox lead to ～60% cell death. Overall, chain topologies of thermoresponsive block copolymers, that is, (c-PNIPAM)-b-PCL versus (l-PNIPAM)-b-PCL, play considerable effects on the self-assembling and thermal phase transition properties and their functions as controlled release drug nanocarriers.     

Diels-Alder Click cross-linked hyaluronic acid hydrogels for tissue engineering

Hyaluronic acid (HA) is a naturally occurring polymer that holds considerable promise for tissue engineering applications. Current cross-linking chemistries often require a coupling agent, catalyst, or photoinitiator, which may be cytotoxic, or involve a multistep synthesis of functionalized-HA, increasing the complexity of the system. With the goal of designing a simpler one-step, aqueous-based cross-linking system, we synthesized HA hydrogels via Diels-Alder "click" chemistry. Furan-modified HA derivatives were synthesized and cross-linked via dimaleimide poly(ethylene glycol). By controlling the furan to maleimide molar ratio, both the mechanical and degradation properties of the resulting Diels-Alder cross-linked hydrogels can be tuned. Rheological and degradation studies demonstrate that the Diels-Alder click reaction is a suitable cross-linking method for HA. These HA cross-linked hydrogels were shown to be cytocompatible and may represent a promising material for soft tissue engineering.     

Synthesis and degradation test of hyaluronic acid hydrogels

Hyaluronic acid (HA) hydrogels prepared with three different crosslinking reagents were assessed by in vitro and in vivo degradation tests for various tissue engineering applications. Adipic acid dihydrazide grafted HA (HA-ADH) was synthesized and used for the preparation of methacrylated HA (HA-MA) with methacrylic anhydride and thiolated HA (HA-SH) with Traut's reagent (imminothiolane). (1)H NMR analysis showed that the degrees of HA-ADH, HA-MA, and HA-SH modification were 69, 29, and 56 mol%, respectively. HA-ADH hydrogel was prepared by the crosslinking with bis(sulfosuccinimidyl) suberate (BS(3)), HA-MA hydrogel with dithiothreitol (DTT) by Michael addition, and HA-SH hydrogel with sodium tetrathionate by disulfide bond formation. According to in vitro degradation tests, HA-SH hydrogel was degraded very fast, compared to HA-ADH and HA-MA hydrogels. HA-ADH hydrogel was degraded slightly faster than HA-MA hydrogel. Based on these results, HA-MA hydrogels and HA-SH hydrogels were implanted in the back of SD rats and their degradation was assessed according to the pre-determined time schedule. As expected from the in vitro degradation test results, HA-SH hydrogel was in vivo degraded completely only in 2 weeks, whereas HA-MA hydrogels were degraded only partially even in 29 days. The degradation rate of HA hydrogels were thought to be controlled by changing the crosslinking reagents and the functional group of HA derivatives. In addition, the state of HA hydrogel was another factor in controlling the degradation rate. Dried HA hydrogel at 37 degrees C for a day resulted in relatively slow degradation compared to the bulk HA hydrogel. There was no adverse effect during the in vivo tests.     

Anti-calcification of bovine pericardium for bioprosthetic heart valves after surface modification with hyaluronic acid derivatives

Surface modification of glutaraldehyde fixed bovine pericardium (GFBP) was successfully carried out with hyaluronic acid (HA) derivatives. At first, HA was chemically modified with adipic dihydrazide (ADH) to introduce hydrazide functional group into the carboxyl group of HA backbone. Then, GFBP was surface modified by grafting HA-ADH to the free aldehyde groups on the tissue and the subsequent HA-ADH hydrogel coating. HA-ADH hydrogels could be prepared through selective crosslinking at low pH between hydrazide groups of HA-ADH and crosslinkers containing succinimmidyl moieties with minimized protein denaturation. When HA-ADH hydrogels were prepared at low pH of 4.8 in the presence of erythropoietin (EPO) as a model protein, EPO release was continued up to 85% of total amount of loaded EPO for 4 days. To the contrary, only 30% of EPO was released from HA-ADH hydrogels prepared at pH=7.4, which might be due to the denaturation of EPO during the crosslinking reaction. Because the carboxyl groups on the glucuronic acid residues are recognition sites for HA degradation by hyaluronidase, the HA-ADH hydrogels degraded more slowly than HA hydrogels prepared by the crosslinking reaction of divinyl sulfone with hydroxyl groups of HA. Following a two-week subcutaneous implantation in osteopontin-null mice, clinically significant levels of calcification were observed for the positive controls without any surface modification. However, the calcification of surface modified GFBP with HA-ADH and HA-ADH hydrogels was drastically reduced by more than 85% of the positive controls. The anti-calcification effect of HA surface modification was also confirmed by microscopic analysis of explan ted tissue after staining with Alizarin Red S for calcium, which followed the trend as observed with calcium quantification.     

Synthesis and NMR characterization of new hyaluronan-based NO donors

Nitric oxide (NO) and hyaluronic acid (HA), two species widely different in terms of molecular complexity and biological competence, are both known to play an important role in the wound healing process. To combine the properties of HA and NO, we synthesized new NO-donors based on hyaluronic acid derivatives exhibiting a controlled NO-release under physiological conditions (in vitro tests). Since two molecules of NO can form a covalent bond with secondary amines to yield structures, named NONO-ates, able to release NO in solution, we used spermidine bound to HA as the NO-linker. The HA-spermidine derivative was obtained by controlled HA amidation in aqueous media, activating the biopolymer carboxylate groups with a water soluble carbodiimide. The resulting derivative, soluble in water, was fully characterized by high field 1H and 13C NMR spectroscopy. The amount of grafting of spermidine on HA was determined by integration of suitable 1H NMR signals. In addition, cross-linked derivatives of HA were synthesized by the Ugi's four-component reaction using formaldehyde, cyclohexylisocyanide, and spermidine. The HA-spermidine networks were characterized by 13C CP-MAS NMR spectroscopy. The degree of cross-linking of the networks was also determined. Finally, the release of NO from the swollen hydrogels freshly saturated with NO, in contact with aqueous media, was monitored by means of UV spectrophotometric measurements.     

Intermolecular interaction and morphology investigation of drug loaded ABA-triblock copolymers with different hydrophilic/lipophilic ratios

Copolymers with different hydrophilic/lipophilic ratios (HLR) were used to optimize the compatibility between polymer as drug carrier and quercetin as lipophilic drug. Synthesis of amphiphilic triblock copolymers (TC) of poly(butylene adipate)–poly(ethylene glycol)–poly(butylene adipate) (PBA–PEG–PBA) with different PBA molecular weights is the first approach for this purpose. Polymerization and structural features of the polymers were analyzed by different characterization techniques (GPC, ¹H NMR and FT-IR). Formation of hydrophobic and hydrophilic domains with different ratios in the ABA-triblock copolymers was studied by ¹H NMR. The sunflower-like nanoparticles were prepared by self-assembling of the amphiphilic copolymers in the aqueous solution. The hydrophobic PBA segments formed the central solid-like core which stabilized by the hydrophilic PEG rings. The optimum HLR for these copolymers was determined on the basis of drug release time and profile, obtained from freeze-dried nanoparticle powders. The results indicated that optimum HLR for the sustained quercetin release obtained at higher molecular weight of polyesteric domains. Zeta potential measurements showed that the nanoparticle size was close related to the initial concentrations of the nanoparticle dispersions and the compositions of the triblock copolymers. Moreover, TEM pictures showed that the nanocarriers morphologies were changed by changing HLR of triblock copolymers. The PBA–PEG–PBA nanoparticles also showed good drug loading properties, suggesting that they were very suitable as delivery devices for hydrophobic drugs.     

Synthesis and rheological properties of hydrogels based on amphiphilic alginate-amide derivatives

New amphiphilic derivatives of sodium alginate were prepared by covalent attachment of dodecylamine onto the polysaccharide via amide linkages at different substitution ratios, using 2-chloro-1-methylpyridinium iodide (CMPI) as coupling reagent. The aim was to limit the progressive loss of associative behaviour which occurs in the case of previously described dodecyl ester alginate derivatives due to hydrolysis of ester bonds. A series of hydrogels was obtained which differed by the amount of attached dodecyl tails. The stability and viscoelastic properties were evaluated and compared to those of hydrogels obtained with alginate esters. The observed differences were discussed in relation to the synthesis procedures. The advantages of amide links are underlined, especially with regard to long-term stability of hydrogels.     

PSMA Antibody-Conjugated Pentablock Copolymer Nanomicellar Formulation for Targeted Delivery to Prostate Cancer

The main purpose of this study was to develop a prostate-specific membrane antigen (PSMA) antibody-conjugated drug-loaded nanomicelles using MPEG--PLA-PCL-PLA-PEG-NH2 pentablock copolymer for targeted delivery of hydrophobic anticancer drugs to prostate cancer cells. During this experiment, monomers of L-lactide, ε-caprolactone, poly(ethylene glycol)-methyl ether, and poly(ethylene glycol)-NH2 were used to prepare pentablock copolymer using the ring opening technique. The pentablock nanomicellar (PBNM) formulation was prepared by the evaporation-rehydration method. The resultant pentablock nanomicelles were then conjugated with PSMA antibody resulting in PSMA-Ab-PTX-PBNM. Both the block copolymers and the nanomicelles were analyzed by hydrogen nuclear magnetic resonance (H-NMR), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD). The obtained nanomicelles (NM) were then analyzed for size and zeta potential using dynamic light scattering-dynamic laser scattering (DLS) and then further submitted to H-NMR and TEM analyses. The XRD, FTIR, and the H-NMR analyses confirmed the structure of the pentablock copolymers. The average size for conjugated nanomicellar was 45 nm?±?2.5 nm. The average (ζ-potential) was around ??28 mV. H-NMR and FTIR analysis done on PSMA-coupled paclitaxel-loaded PBNM showed peaks characteristic of the drug (paclitaxel) and the polymer, confirming the successful encapsulation. TEM analysis showed well-defined spherical morphology and confirmed the size range obtained by the DLS. In vitro release studies revealed sustained slow of PTX in phosphate buffer solution (PBS). Confocal scanning microscopy (TEM) of coumarin6-loaded in PBNM indicated that pentablock nanomicelles were internalized into the prostate cancer (PC-3) cells. Cell proliferation assay showed that nanomicelles ferried paclitaxel into the PC-3 cells and subsequently reduced the cell proliferation. The results depict PTX-PBNM-Ab as a suitable carrier for targeted delivery of drugs to prostate cancer cells.     

Enzymatic nanoreactors for environmentally benign biotransformations. 1. Formation and catalytic activity of supramolecular complexes of laccase and linear-dendritic block copolymers

We describe the construction of enzymatic nanoreactors through noncovalent envelopment of a glycoprotein by amphiphilic linear-dendritic AB or ABA copolymers. The synthetic procedure is based on the regioselective adsorption of dendritic poly(benzyl ether)-block-linear poly(ethylene glycol)-block-dendritic poly(benzyl ether) or linear poly(ethylene oxide)-block-dendritic poly(benzyl ether) copolymers onto the oxidative enzyme laccase from Trametes versicolor in aqueous medium. The complexes formed have improved catalytic activity compared with the native enzyme (77-85 nkat/mL vs 60 nkat/mL, respectively) and are more stable at elevated temperatures up to 70 degrees C. Experiments with deglycosylated laccase confirm that the glycoside fragments in the native enzyme serve as the anchor sites for the linear-dendritic copolymers. The enzymatic nanoreactors are able to effectively oxidize series of substrates: phenolic compounds (syringaldazine) and hydrophobic polyaromatic hydrocarbons (anthracene and benzo[a]pyrene) under "green" chemistry conditions.     

Enzymatic degradation of hyaluronan hydrogels with different capacity for in situ bio‐mineralization

In situ cross‐linked hyaluronan (HA) hydrogels with different capacities for biomineralization were prepared and their enzymatic degradation was monitored. Covalent incorporation of bisphosphonates (BPs) into HA hydrogel results in the increased stiffness of the hydrogel in comparison with the unmodified HA hydrogel of the same cross‐linking density. The rate of enzymatic degradation of HABP hydrogel was significantly lower than the rate of degradation of control HA hydrogel in vitro. This effect is observed only in the presence of calcium ions that strongly bind to the matrix‐anchored BP groups and promote further mineralization of the matrix. The degradation of the hydrogels was followed by noninvasive fluorescence measurements enabled after mild and chemoselective labeling of cross‐linkable HA derivatives with a fluorescent tag.     

Block versus random amphiphilic copolymers as antibacterial agents

We examined the antibacterial and hemolytic activities in a series of amphiphilic block and random copolymers of poly(vinyl ether) derivatives prepared by base-assisting living cationic polymerization. Block and random amphiphilic copolymers with similar monomer compositions showed the same level of activity against Escherichia coli . However, the block copolymers are much less hemolytic compared to the highly hemolytic random copolymers. These results indicate that the amphiphilic copolymer structure is a key determinant of activity. Furthermore, the block copolymers induced dye leakage from lipid vesicles consisting of E. coli -type lipids, but not mammalian lipids, while the random copolymers disrupted both types of vesicles. In addition, both copolymers displayed bactericidal and hemolytic activities at concentrations 1 or 2 orders of magnitude lower than their critical (intermolecular) aggregation concentrations (CACs), as determined by light scattering measurements. This suggests that polymer aggregation or macromolecular assembly is not a requisite for the antibacterial activity and selectivity against bacteria over human red blood cells (RBCs). We speculate that different single-chain conformations between the block and random copolymers play an important role in the antibacterial action and underlying antibacterial mechanisms.