A Simple and Efficient Method for High Fidelity PCR Cloning Using Antibody-neutralizing Technology

We introduce the TA cloning antibody method for the high-fidelity PCR product amplified by family B DNA polymerase without purification. This method uses antibodies and Thermus aquaticus (Taq) DNA polymerase. The antibodies can inhibit only the activity of family B DNA polymerase, and Taq can co-work for A-tailing. This method has nearly cloning efficiency to that of the PCR product of Taq.     

In silico study of the inhibition of DNA polymerase by a novel catalpol derivative

In this work, a novel catalpol derivative (6,10,2′,6′-tetraacetyl-O-catalpol), which was previously obtained by our group and shown experimentally to inhibit a type of Taq DNA polymerase, was studied in silico. Studies of the interaction of 6,10,2′,6′-tetraacetyl-O-catalpol with the Klentaq fragment of the Taq DNA polymerase I from Thermus aquaticus helped to elucidate the mechanism of inhibition of the enzyme, and offered valuable information that can be used to propose substrate structural modifications aimed at increasing the binding affinity. Classical and semi-empirical methods were used to characterize the conformational preferences of this organic compound in solution. Using docking simulations, the most probable binding mode was found, and the stabilities of the docked solutions were tested in a series of molecular dynamics experiments. Results indicated that the mechanism of inhibition may be competitive, which agrees with previous binding experiments done with 6,10,2′,6′-tetraacetyl-O-catalpol.     

Capacity of Nine Thermostable DNA Polymerases To Mediate DNA Amplification in the Presence of PCR-Inhibiting Samples

The PCR is an extremely powerful method for detecting microorganisms. However, its full potential as a rapid detection method is limited by the inhibition of the thermostable DNA polymerase from Thermus aquaticus by many components found in complex biological samples. In this study, we have compared the effects of known PCR-inhibiting samples on nine thermostable DNA polymerases. Samples of blood, cheese, feces, and meat, as well as various ions, were added to PCR mixtures containing various thermostable DNA polymerases. The nucleic acid amplification capacity of the nine polymerases, under buffer conditions recommended by the manufacturers, was evaluated by using a PCR-based detection method for Listeria monocytogenes in the presence of purified template DNA and different concentrations of PCR inhibitors. The AmpliTaq Gold and the Taq DNA polymerases from Thermus aquaticus were totally inhibited in the presence of 0.004% (vol/vol) blood in the PCR mixture, while the HotTub, Pwo, rTth, and Tfl DNA polymerases were able to amplify DNA in the presence of 20% (vol/vol) blood without reduced amplification sensitivity. The DNA polymerase from Thermotoga maritima (Ultma) was found to be the most susceptible to PCR inhibitors present in cheese, feces, and meat samples. When the inhibitory effect of K and Na ions was tested on the nine polymerases, HotTub from Thermus flavus and rTth from Thermus thermophilus were the most resistant. Thus, the PCR-inhibiting effect of various components in biological samples can, to some extent, be eliminated by the use of the appropriate thermostable DNA polymerase.     

Characterization of DNA polymerase from the hyperthermophilic archaeon Thermococcus marinus and its application to PCR

The family B DNA polymerase gene from the archaeon Thermococcus marinus (Tma) contains a long open reading frame of 3,939 bp that encodes 1,312 amino acid residues. The gene is split by one intervening sequence that forms a continuous open reading frame with the two polymerase exteins. In this study, the Tma DNA polymerase gene both with (precursor form) and without (mature form) its intein was expressed in Escherichia coli, purified by heat treatment and HiTrap™ Heparin HP column chromatography and characterized. Primary sequence analysis of the mature Tma polymerase showed high sequence identity with DNA polymerases in the genus Thermococcus. The expressed precursor form was easily spliced during purification steps. The molecular mass of the purified Tma DNA polymerases is about 90 kDa, as estimated by SDS-PAGE. Both Tma DNA polymerases showed the same properties. PCR performed with this enzyme was found to be optimal in the presence of 50 mM Tris–HCl (pH 8.4), 40 mM KCl, 12.5 mM (NH₄)₂SO_4, 2 mM MgCl_2, 0.05% Triton X-100 and 0.0075% BSA. Furthermore, long-range PCR and time-saving PCR were performed using various specific ratios of Taq and Tma DNA polymerases (Tma plus DNA polymerase).     

Cloning,expression, and PCR application of DNA polymerase from the hyperthermophilic archaeon, <Emphasis Type="Italic">Thermococcus celer</Emphasis>

The family B DNA polymerase gene was amplified from Thermococcus celer genomic DNA by using the degenerate primers and DNA walking PCR. The Tce DNA polymerase gene was cloned and sequenced. The gene contains an ORF of 2,325 bp encoding 774 amino acid residues with a calculated molecular weight of 89,788.9 kDa. The Tce DNA polymerase was purified by heat treatment and heparin column chromatography. The optimal conditions for PCR were determined. Long-range PCR and time-saving PCR were performed using various specific ratios of Taq and Tce DNA polymerases (Tce plus DNA polymerase). Tce plus DNA polymerase surpassed the PCR performance of Tce, Taq and Pfu DNA polymerases in terms of yield and efficiency.     

News & Notes: Primary Structure of the DNA Polymerase I Gene of an α-Proteobacterium, Rhizobium leguminosarum, and Comparison with Other Family A DNA Polymerases

The structural gene for DNA polymerase I of Rhizobium leguminosarum was determined. The rhizobium DNA polymerase I consists of 1016 amino acid residues with a calculated molecular weight of 111,491 Dalton. The amino acid sequence comparison with E. coli DNA polymerase I, Thermus aquaticus DNA polymerase I, and Rickettsia prowazekii DNA polymerase I showed that, although 5′-nuclease and DNA polymerase domains are highly conserved, 3′ to 5′ exonuclease domains are much less conserved. While both R. leguminosarum and R. prowazekii belong to the alpha subdivision of the Proteobacteria on the basis of 16S ribosomal RNA phylogeny, the primary structure of the DNA polymerase I is quite different; the rhizobium DNA polymerase I has 3′ to 5′ proofreading exonuclease, but the rickettsia DNA polymerase I does not. Received: 15 December 1998 / Accepted: 2 February 1999     

Unique Substrate Spectrum and PCR Application of Nanoarchaeum equitans Family B DNA Polymerase

The known archaeal family B DNA polymerases are unable to participate in the PCR in the presence of uracil. Here, we report on a novel archaeal family B DNA polymerase from Nanoarchaeum equitans that can successfully utilize deaminated bases such as uracil and hypoxanthine and on its application to PCR. N. equitans family B DNA polymerase (Neq DNA polymerase) produced λ DNA fragments up to 10 kb with an approximately 2.2-fold-lower error rate (5.53 × 10⁻⁶) than Taq DNA polymerase (11.98 × 10⁻⁶). Uniquely, Neq DNA polymerase also amplified λ DNA fragments using dUTP (in place of dTTP) or dITP (partially replaced with dGTP). To increase PCR efficiency, Taq and Neq DNA polymerases were mixed in different ratios; a ratio of 10:1 efficiently facilitated long PCR (20 kb). In the presence of dUTP, the PCR efficiency of the enzyme mixture was two- to threefold higher than that of either Taq and Neq DNA polymerase alone. These results suggest that Neq DNA polymerase and Neq plus DNA polymerase (a mixture of Taq and Neq DNA polymerases) are useful in DNA amplification and PCR-based applications, particularly in clinical diagnoses using uracil-DNA glycosylase.     

Characterization and application of aptamers for Taq DNA polymerase selected using an evolution-mimicking algorithm

Using an evolution-mimicking algorithm (EMA), we have recently identified DNA aptamers that inhibit Taq DNA polymerase. In the present study, we have attempted to improve further the inhibitory activities of aptamers, as well as to characterize those aptamers with the most potent inhibitory activities. To characterize the most potent aptamer and demonstrate its applicability, the abilities to inhibit Tth DNA polymerase and to modulate specific amplification in PCR were investigated. This aptamer inhibited both Tth DNA polymerase and Taq DNA polymerase and improved the specificity of detection of a low-copy-number target gene in PCR using these DNA polymerases.     

Optimal conditions to use Pfu exo– DNA polymerase for highly efficient ligation-mediated polymerase chain reaction protocols

Ligation-Mediated Polymerase Chain Reaction (LMPCR) is the most sensitive sequencing technique available to map single-stranded DNA breaks at the nucleotide level of resolution using genomic DNA. LMPCR has been adapted to map DNA damage and reveal DNA–protein interactions inside living cells. However, the sequence context (GC content), the global break frequency and the current combination of DNA polymerases used in LMPCR affect the quality of the results. In this study, we developed and optimized an LMPCR protocol adapted for Pyrococcus furiosus exo^– DNA polymerase (Pfu exo^–). The relative efficiency of Pfu exo^– was compared to T7-modified DNA polymerase (Sequenase 2.0) at the primer extension step and to Thermus aquaticus DNA polymerase (Taq) at the PCR amplification step of LMPCR. At all break frequencies tested, Pfu exo^– proved to be more efficient than Sequenase 2.0. During both primer extension and PCR amplification steps, the ratio of DNA molecules per unit of DNA polymerase was the main determinant of the efficiency of Pfu exo^–, while the efficiency of Taq was less affected by this ratio. Substitution of NaCl for KCl in the PCR reaction buffer of Taq strikingly improved the efficiency of the DNA polymerase. Pfu exo^– was clearly more efficient than Taq to specifically amplify extremely GC-rich genomic DNA sequences. Our results show that a combination of Pfu exo^– at the primer extension step and Taq at the PCR amplification step is ideal for in vivo DNA analysis and DNA damage mapping using LMPCR.     

Reevaluation of the exact CAG repeat length in hereditary cerebellar ataxias using highly denaturing conditions and long PCR

Hereditary cerebellar ataxias, including spinocerebellar ataxia type I (SCA1), dentato-rubro-pallidoluysian atrophy (DRPLA), and Machado-Joseph disease (MJD), have been associated with unstable CAG repeats. The length of the CAG repeat is a major factor in determining the age of onset of these diseases. In electrophoresis through acrylamide gels with formamide, the CAG repeat length following the polymerase chain reaction (PCR) coincides with the sequence-determined repeat length after subcloning. However, without formamide, PCR products with long CAG repeats appear 1–4 repeats shorter than when electrophoresed with formamide, and the repeat lengths are variable. In addition, the larger the CAG repeats are, the more difficult are the PCR reactions. A mixture containing thermostable Taq and Pwo DNA polymerases (so-called “long PCR”) is much more sensitive than that with Taq polymerase alone in detecting expanded CAG repeats. Therefore, highly denaturing conditions, especially formamide gel electrophoresis, and the “long PCR” protocol should be used to evaluate the exact CAG repeat length. We have used these principles to detect unstable CAG repeats. The normal ranges are 14–34 repeats for MJD, 6–31 repeats for DRPLA, and 21–32 repeats for SCA1. Received: 29 August 1995 / Revised: 12 October 1995     

New morphotypes of condensed DNA microparticles formed in PCR with <Emphasis Type="Italic">KlenTaq</Emphasis> and <Emphasis Type="Italic">Taq</Emphasis> polymerases and plasmid DNA as a template

The specimens of DNA microparticles formed during PCR amplification of IS-elements ISAfe1 and IST2 by KlenTaq or Taq polymerases and plasmid DNA as a template under varying conditions were investigated by electron microscopy. Microparticle yield and morphology were found to depend on the level of synthesis of single-stranded DNA fragments during PCR. The conditions were studied for formation of discs (ellipsoids) several micrometers in diameter and several dozens of nanometers thick, as well as of microparticles of other morphologies, in the course of PCR with Taq polymerase. The structure of the microparticles produced during an asymmetric PCR, i.e., under conditions of low concentration of one of the two primers, was investigated. Morphology of the DNA micro- and nanoparticles was found to depend mainly on the DNA polymerase used in asymmetric PCR. In particular, in the presence of the KlenTaq polymerase, discs or ellipsoids a few dozen nanometers thick were formed, while in the presence of the Taq polymerase, micro- and nanospheres, heterogeneous in size with rugged surfaces, were produced. The effect of Mn²⁺ cations on DNA microparticle morphology was studied. In the presence of Mn²⁺, microparticle morphology changed dramatically; in PCR mixtures containing KlenTaq polymerase supplemented with Mn²⁺, DNA microspheres with fringed surfaces were formed; in the presence of Taq polymerase, microparticles in the form of short, rounded rods were produced. In light of these data, the molecular mechanism of micro- and nanoparticle formation in the course of PCR is discussed.     

Evaluation of PCR-Generated Chimeras, Mutations, and Heteroduplexes with 16S rRNA Gene-Based Cloning

To evaluate PCR-generated artifacts (i.e., chimeras, mutations, and heteroduplexes) with the 16S ribosomal DNA (rDNA)-based cloning approach, a model community of four species was constructed from alpha, beta, and gamma subdivisions of the division Proteobacteria as well as gram-positive bacterium, all of which could be distinguished by HhaI restriction digestion patterns. The overall PCR artifacts were significantly different among the three Taq DNA polymerases examined: 20% for Z-Taq, with the highest processitivity; 15% for LA-Taq, with the highest fidelity and intermediate processitivity; and 7% for the conventionally used DNA polymerase, AmpliTaq. In contrast to the theoretical prediction, the frequency of chimeras for both Z-Taq (8.7%) and LA-Taq (6.2%) was higher than that for AmpliTaq (2.5%). The frequencies of chimeras and of heteroduplexes for Z-Taq were almost three times higher than those of AmpliTaq. The total PCR artifacts increased as PCR cycles and template concentrations increased and decreased as elongation time increased. Generally the frequency of chimeras was lower than that of mutations but higher than that of heteroduplexes. The total PCR artifacts as well as the frequency of heteroduplexes increased as the species diversity increased. PCR artifacts were significantly reduced by using AmpliTaq and fewer PCR cycles (fewer than 20 cycles), and the heteroduplexes could be effectively removed from PCR products prior to cloning by polyacrylamide gel purification or T7 endonuclease I digestion. Based upon these results, an optimal approach is proposed to minimize PCR artifacts in 16S rDNA-based microbial community studies.     

Novel thermostable Y-family polymerases: applications for the PCR amplification of damaged or ancient DNAs

For many years, Taq polymerase has served as the stalwart enzyme in the PCR amplification of DNA. However, a major limitation of Taq is its inability to amplify damaged DNA, thereby restricting its usefulness in forensic applications. In contrast, Y-family DNA polymerases, such as Dpo4 from Sulfolobus solfataricus, can traverse a wide variety of DNA lesions. Here, we report the identification and characterization of five novel thermostable Dpo4-like enzymes from Acidianus infernus, Sulfolobus shibatae, Sulfolobus tengchongensis, Stygiolobus azoricus and Sulfurisphaera ohwakuensis, as well as two recombinant chimeras that have enhanced enzymatic properties compared with the naturally occurring polymerases. The Dpo4-like polymerases are moderately processive, can substitute for Taq in PCR and can bypass DNA lesions that normally block Taq. Such properties make the Dpo4-like enzymes ideally suited for the PCR amplification of damaged DNA samples. Indeed, by using a blend of Taq and Dpo4-like enzymes, we obtained a PCR amplicon from ultraviolet-irradiated DNA that was largely unamplifyable with Taq alone. The inclusion of thermostable Dpo4-like polymerases in PCRs, therefore, augments the recovery and analysis of lesion-containing DNA samples, such as those commonly found in forensic or ancient DNA molecular applications.     

Molecular cloning, sequence and expression of Aa-polB , a mitochondrial gene encoding a family B DNA polymerase from the edible basidiomycete Agrocybe aegerita

An ORF of 1716 nucleotides, putatively encoding a DNA polymerase, was characterized in the mitochondrial genome of the edible basidiomycete Agrocybe aegerita. The complete gene, named Aa-polB, and its flanking regions were cloned and sequenced from three overlapping restriction fragments. Aa-polB is located between the SSU rDNA (5′ region) and a gene for tRNA^Asn (3′ region), and is separated from these genes by two A+T-rich intergenic regions of 1048 (5′ region) and 3864 (3′ region) nucleotides, which lack repeated sequences of mitochondrial or plasmid origin. The deduced Aa-POLB protein shows extensive sequence similarity with the family B DNA polymerases encoded by genomes that rely on protein-primed replication (invertrons). The domains involved in the 3′→5′ exonuclease (Exo I to III) and polymerase (Pol I to Pol V) activities were localized on the basis of conserved sequence motifs. The alignment of the Aa-POLB protein (571 amino acids) with sequences of family B DNA polymerases from invertrons revealed that in Aa-POLB the N-terminal region preceding Exo I is short, suggesting a close relationship with the DNA polymerases of bacteriophages that have linear DNA. The Aa-polB gene was shown to be present in all wild strains examined, which were collected from a wide range of locations in Europe. As shown by RT-PCR, the Aa-polB gene is transcribed in the mitochondria, at a low but significant level. The likelihood of the coexistence of Aa-POLB and Pol γ in the A. aegerita mitochondrion is discussed in the light of recent reports showing the conservation of the nucleus-encoded Pol γ from yeast to human. Received: 13 October 1998 / Accepted: 21 December 1998     

Exonucleases and the incorporation of aranucleotides into DNA

The polymerization of nucleotide analogs into DNA is a common strategy used to inhibit DNA synthesis in rapidly dividing tumor cells and viruses. The mammalian DNA polymerases catalyze the insertion of the arabinofuranosyl analogs of dNTPs (aranucleotides) into DNA efficiently, but elongate from the 3′ aranucleotides poorly. Slow elongation provides an opportunity for exonucleases to remove aranucleotides. The exonuclease activity associated with DNA polymerase δ removes araCMP from 3′ termini with the same efficiency that it removes a paired 3′ deoxycytosine suggesting that the proofreading exonucleases associated with DNA polymerases might remove aranucleotides inefficiently. A separate 30 kDa exonuclease has been purified from mammalian cells that removes araCMP from 3′ termini. The activity of this enzyme in the cell could remove aranucleotides from 3′ termini of DNA and decrease the efficacy of the analogs. Inhibition analysis of the purified exonuclease shows that this enzyme is inhibited by thioinosine monophosphate (TIMP) with aK _i=17 μM. When high TIMP levels are generated in HL-60 cells, incorporation of araC in DNA is increased about 16-fold relative to total DNA synthesis. This increased araC in DNA is likely a result of exonuclease inhibition in the cell. Thus, exonucleases in cells might play an important role in removing aranucleotides inserted by DNA polymerases.     

Synergy between DNA polymerases increases polymerase chain reaction inhibitor tolerance in forensic DNA analysis

The success rate of diagnostic polymerase chain reaction (PCR) analysis is lowered by inhibitory substances present in the samples. Recently, we showed that tolerance to PCR inhibitors in crime scene saliva stains can be improved by replacing the standard DNA polymerase AmpliTaq Gold with alternative DNA polymerase-buffer systems (Hedman et al., BioTechniques 47 (2009) 951-958). Here we show that blending inhibitor-resistant DNA polymerase-buffer systems further increases the success rate of PCR for various types of real crime scene samples showing inhibition. For 34 of 42 “inhibited” crime scene stains, the DNA profile quality was significantly improved using a DNA polymerase blend of ExTaq Hot Start and PicoMaxx High Fidelity compared with AmpliTaq Gold. The significance of the results was confirmed by analysis of variance. The blend performed as well as, or better than, the alternative DNA polymerases used separately for all tested sample types. When used separately, the performance of the DNA polymerases varied depending on the nature of the sample. The superiority of the blend is discussed in terms of complementary effects and synergy between the DNA polymerase-buffer systems.     

RACE using only a gene-specific primer

This article describes a simple method for accurate rapid amplification of complementary deoxyribonucleic acid (cDNA) ends (RACE), the distinctive feature being that only a gene-specific primer is used, without an anchor or adapter primer. Under these conditions, Thermus aquaticus (Taq) polymerase synthesizes cDNA ends exactly, so that amplified products obtain a characteristic structure: a terminal inverted repeat composed of a gene-specific primer and occasionally several nucleotides from its 3′ flanking sequence. These structures suggest a hypothetical mechanism of cDNA end synthesis in which Taq DNA polymerase synthesizes a sequence complementary to the gene-specific primer at the 3′ end of the daughter strand by switching the template to the 5′ terminal region through circularization of the DNA. As a result, the targeted cDNA will be efficiently amplified with only a single gene-specific primer. This technique, which provides highly specific amplification of the 5′ and 3′ ends of a cDNA, is especially useful for isolation of cDNA when the corresponding messenger ribonucleic acid is scarce.     

TspMI, a thermostable isoschizomer of XmaI (5′C/CCGGG3′): characterization and single molecule imaging with DNA

TspMI, a thermostable isoschizomer of XmaI from a Thermus sp., has been characterized. The enzyme was purified to homogeneity using Cibacron-Blue 3GA agarose, Heparin agarose, SP sephadex C50, and Mono-Q fast protein liquid chromatography and was found to be a homodimer of 40 kDa. Restriction mapping and run-off sequencing of TspMI-cleaved DNA ends depicted that it cleaved at 5′C/CCGGG3′ to generate a four-base, 5′-CCGG overhang. The enzyme was sensitive to methylation of second and third cytosines in its recognition sequence. TspMI worked optimally at 60°C with 6 mM Mg²⁺, no Na⁺/K⁺, and showed no star activity in the presence of 25% glycerol. The enzyme could efficiently digest the DNA labeled with a higher concentration of YOYO-I (one dye molecule to one nucleotide), making it a useful candidate for real-time imaging experiments. Single molecule interaction between TspMI and λ DNA was studied using total internal reflection fluorescence microscopy. The enzyme survived 30 polymerase chain reaction (PCR) cycles in the presence of 10% glycerol and 0.5 M trehalose without any activity loss and, hence, is suitable for incorporation in restriction-endonuclease-mediated selective-PCR for various applications.Electronic Supplementary Material Supplementary material for this article is available at     

A new thermostable DNA polymerase mixture for efficient amplification of long DNA fragments

The thermostable DNA polymerases have been used for amplification of DNA fragments since the invention of PCR. The constraint on the maximum size of the amplified fragments can be solved to certain level by the use of unbalanced mixtures of non-proofreading and proofreading thermostable DNA polymerases. In this study, we tested the use of a mixtures of N-terminal deletional variant of Taq polymerase—Klentaq278 and Tne polymerase from Thermotoga neapolitana. Klentaq278 and Tne polymerase genes were cloned and expressed in different expression vectors under tac promoter. The most efficient ratio of Klentaq278/Tne polymerase for amplification was 10: 1. The polymerase mixture of Klentaq278 and Tne polymerase is very effective in amplification of DNA fragments for up to 8 kb and is useful addition to a DNA polymerases used in long-range PCR.     

Characterization and PCR optimization of the thermostable family B DNA polymerase from Thermococcus guaymasensis

The gene encoding Thermococcus guaymasensis DNA polymerase (Tgu DNA polymerase) was cloned and sequenced. The 2328 bp Tgu DNA polymerase gene encoded a 775 amino acid residue protein. Alignment of the entire amino acid sequence revealed a high degree of sequence homology between Tgu DNA polymerase and other archaeal family B DNA polymerases. The Tgu DNA polymerase gene was expressed under the control of the T7lac promoter on pET-22b(+) in Escherichia coli BL21-CodonPlus(DE3)-RIL. The expressed enzyme was then purified by heat treatment followed by two steps of chromatography. The optimum pH and temperature were 7.5 and 80 °C, respectively. The optimal buffer for PCR with Tgu DNA polymerase consisted of 50 mM Tris–HCl (pH 8.2), 4 mM MgCl₂, 50 mM KCl, and 0.02% Triton X-100. Tgu DNA polymerase revealed 4-fold higher fidelity (3.17 × 10^?6) than Taq DNA polymerase (12.13 × 10^?6) and a faster amplification rate than Taq and Pfu DNA polymerases. Tgu DNA polymerase had an extension rate of 30 bases/s and a processivity of 150 nucleotides (nt). Thus, Tgu DNA polymerase has some faster elongation rate and a higher processivity than Pfu DNA polymerase. Use of different ratios of Taq and Tgu DNA polymerases determined that a ratio of 4:1 efficiently facilitated long PCR (approximately 15 kb) and a 3-fold lower error rate (4.44 × 10^?6) than Taq DNA polymerase.