Das Autoselect-System – ein Automatensystem zur Selektion von Antibiotikaproduzenten. III. Ein Impfautomat zum Isolieren von Einzelkolonien

An inoculator enabling the isolation of colonies from petridishes onto agar-filled microcultur cups, arranged in a pattern of 8 × 8 in cassettes, is described. The transfer of the colonies takes place by turning of an inoculation cross with 4 loops. While the cross stops and lowers, one loop is sterilized, another, which has been sterilized shortly before, is being cooled in sterile water, the next one is taking off some material from a colony and the last is spreading the material on the agar of a cup. The capacity of the machine accounts about 600 colonies per hour.     

Das Autoselect-System – ein Automatensystem zur Selektion von Antibiotikaproduzenten. I. Methodische Grundlagen und Umfang des Systems

The methodical principle of an automated selection system for antibiotic producers, the Autoselectsystem, consisting of six machines and a computer is explained. In order to work with this machines the following material is needed: Cassettes with 64 microculture cups for cultivation of colonies on agar, cassettes with glass-tubes for dilution of samples, and test-plates with 64 holes for performing the agar diffusion test. The cups, the tubes and holes are arranged in a pattern of 8×8. In a serie of papers the machines will be described.     

The cementless artificial hip cup--implant components with reliable long-term stability?

A hip joint simulator was developed to analyse the mechanism of loosening of cementless artificial hip cups. The machine induces vibrating motions and asymmetrical tilt shock loadings of the artificial cup. On measuring the primary stability of threaded cups, the simulation tests performed on pelvis substitute models, and animal and human acetabula failed to show any loosening of threaded cups fixed in place with a screw-in torque of more than 10 Nm. Instable cups became loose all the sooner, the lower the preload between the cup and femoral head. This demonstrates the importance of both the screw-in torque of the cup and the training status of the periarticular muscles.     

Primary stability of threaded cups in THR--an experimental study.

Four threaded cups were tested up to their lever-out moments, torque-in moments and their resistance to failure. A was a parabolic-shaped, B was a spherical, C was a spherical-shaped too, and D was a conical shaped cup. Cup A and D represent cups which have proven themselves in clinical applications, but not cup B. The threads were determined and showed different constructive features. The cups were torqued into precise cavities in PVC foam cubes, after that they were levered out in a testing machine. The lever-out moments of all the cups showed significant differences; the results were: A: 78.4 Nm, B: 88.7 Nm, C: 117.5 Nm, D; 136.6 Nm. In the case of the torque-in moments there were no significant differences between A and B, neither between C and D. The differences in stiffness between B and C were not significant, but they were between the others. The primary stability against lever-out and the torque-in moment of threaded cups for artificial hip replacement can be basically influenced by different constructive features. Hence lever-out moment and torque-in moment should be understood and tested as independent variables.     

Disposable plastic rodent feeders for use in an automated filling system

Rodent feeder devices are often made of reusable, sanitizable materials such as glass and stainless steel. As part of an initiative at the authors' facility to automate the feeder filling process, disposable plastic feeding cups were proposed as a preferable alternative to standard feeders for use in a filling machine. The authors tested and validated designs for rodent meal-type feeder assemblies that incorporated plastic cups. Assemblies included stainless steel shields that prevented rats and mice from chewing on the plastic cups while allowing them full access to food. The use of disposable feeder cups that are filled and sealed automatically reduces labor associated with sanitation, enables staff to prepare feeders for several weeks in advance and limits personnel contact with feed that may contain harmful chemicals.     

Efficacy of Fluon conditioning for capturing cerambycid beetles in different trap designs and persistence on panel traps over time

Fluon PTFE is a fluoropolymer dispersion applied as a surface conditioner to cross-vane panel traps to enhance trap efficiency for cerambycid beetles. We describe the results of three experiments to further optimize cerambycid traps of different designs and to test the effect of Fluon over time. We tested Fluon with Lindgren funnel and panel traps fitted with either wet or dry collection cups on catches of cerambycid beetles and how the effect of Fluon on panel traps persisted. Fluon-treated funnel traps with wet collection cups captured approximately 6x more beetles than the untreated funnel traps with wet collection cups. Untreated funnel traps with dry collection cups did not capture any beetles; however, Fluon-treated funnel traps with dry collection cups captured an average of four beetles per trap. Fluon-treated panel traps with wet collection cups captured approximately 9x more beetles than untreated panel traps with wet collection cups. Fluon-treated panel traps with dry collection cups captured approximately 11x more beetles than untreated panel traps with dry collection cups. The effect of Fluon on capturing cerambycid beetles did not decline after use in one or two field seasons. There was no significant difference in the number of beetles captured in freshly treated panel traps compared with traps that had been used for 1 or 2 yr. Fluon-treated traps captured nine species that were not captured in untreated traps. Conditioning both Lindgren funnel and panel traps with Fluon enhances the efficacy and sensitivity of traps deployed to detect exotic cerambycid species, or for monitoring threatened species at low population densities.     

Biochemical investigation of lens induction in vitro. I. Induction properties of the eye cup and ectodermal response

1. Optic cups of 48, 72 and 96 hours old chick embryos were prepared, cultured and recombined with ectoderm. With the optic cups of 48 hours old embryos, lens formation occurred in 16% of the cases. With the optic cups of 72 hours old embryos, lens formation occurred in 28% of the cases. Optic cups of 96 hours old embryos were not able to induce a lens. 2. The optic cup proved to be able to induce a lens more than once. 3. Ectoderm of the head of 72 hours old embryos was still able to form a lens. 4. Using homogenized eye cups of 72 hours old embryos, lens induction occurred only in a few cases. When the optic cups were cut into small pieces, lens induction occurred in 30% of the cases. This suggests that intact cells are necessary to obtain lens induction.     

Laboratory testing of a lethal ovitrap for Aedes aegypti

Laboratory tests were conducted to determine the feasibility of making the mosquito ovitrap lethal to Aedes aegypti (L.) when they attempt to oviposit in the trap. Heavy-weight velour paper strips (2.54 x 11 cm) were used as an alternative to the wooden paddle normally provided as a substrate for mosquito oviposition. The paper strips were pretreated with insecticide solutions and allowed to dry before being used in oviposition cups of 473 ml capacity, filled with water initially to within 2.5 cm of the brim. Insecticides chosen for their quick knock-down efficacy were bendiocarb 76% WP (1.06 mg a.i./strip) and four pyrethroids: permethrin 25% WP (0.16 mg a.i./strip), deltamethin 4.75% SC (0.87 mg a.i./strip), cypermethrin 40% WP (2.81 mg a.i./strip), and cyfluthrin 20% WP (0.57 mg a.i./ strip). For experimental evaluation, two oviposition cups (one with an insecticide-treated strip and one with an untreated strip) were placed in cages (cubic 30 cm) with gravid female Ae. aegypti mosquitoes (aged 6-8 days) from a susceptible laboratory strain. Mortality-rates of female mosquitoes were 45% for bendiocarb, 47% for permethrin, 98% for deltamethrin, 100% for cypermethrin, and 100% for cyfluthrin. Young instar larvae added to the treated cups died within 2h. After water evaporation from the cups for 38 days, fresh mosquito females had access to previously submerged portions of the velour paper paddle, and mortality rates of 59% or more occurred. Cups that had water (360 ml) dripped into them, to simulate rain, produced female mosquito mortality rates of > 50% and all larvae died within 3 h of being added. These tests demonstrate that the ovitrap can be made lethal to both adults and larvae by insecticidal treatment of the ovistrip. Field efficacy trials are underway in Brazil to access the impact of this simple, low-cost, environmentally benign approach on populations of the dengue vector Ae. aegypti.     

In situ sampling of small volumes of soil solution using modified micro-suction cups

Two modified designs of micro-pore-water samplers were tested for their capacity to collect unbiased soil solution samples containing zinc and citrate. The samplers had either ceramic or polyethersulfone (PES) suction cups. Laboratory tests of the micro-samplers were conducted using (a) standard solutions with zinc and citrate concentrations that can be found in the rhizosphere and (b) two soils with contrasting texture. The results showed that both suction cups were inert with respect to citrate and zinc: they did not affect the concentrations of the two ions in freshly prepared and directly sampled standard solutions. Both micro-suction cups removed most microorganisms by filtration, though the PES cups were more effective in this respect. This filtering by the suction cups allowed for relatively accurate analysis of citrate in solutions containing microorganisms. These capacities, together with their small size and small dead volume, make the two micro-pore-water samplers highly suitable for sampling of rhizosphere soil solutions although further testing with other organic acids and trace metals may be needed.     

Coffee consumption and death from coronary heart disease in middle aged Norwegian men and women.

OBJECTIVE--To study the association between number of cups of coffee consumed per day and coronary death when taking other major coronary risk factors into account. DESIGN--Men and women attending screening and followed up for a mean of 6.4 years. SETTING--Cardiovascular survey performed by ambulatory teams from the National Health Screening Service in Norway. PARTICIPANTS--All middle aged people in three counties: 19,398 men and 19,166 women aged 35-54 years who reported neither cardiovascular disease or diabetes nor symptoms of angina pectoris or intermittent claudication. MAIN OUTCOME MEASURE--Predictive value of number of cups of coffee consumed per day. RESULTS--At initial screening total serum cholesterol concentration, high density lipoprotein cholesterol concentration, blood pressure, height, and weight were measured and self reported information about smoking history, physical activity, and coffee drinking habits was recorded. Altogether 168 men and 16 women died of coronary heart disease during follow up. Mean cholesterol concentrations for men and women were almost identical and increased from the lowest to highest coffee consumption group (13.1% and 10.9% respectively). With the proportional hazards model and adjustment for age, total serum and high density lipoprotein cholesterol concentrations, systolic blood pressure, and number of cigarettes per day the coefficient for coffee corresponded to a relative risk between nine or more cups of coffee and less than one cup of 2.2 (95% confidence interval 1.1 to 4.5) for men and 5.1 (0.4 to 60.3) for women. For men the relative risk varied among the three counties. CONCLUSIONS--Coffee may affect mortality from coronary heart disease over and above its effect in raising cholesterol concentrations.     

Who Needs Cream and Sugar When There Is Eco-Labeling? Taste and Willingness to Pay for “Eco-Friendly” Coffee

Participants tasted two cups of coffee, decided which they preferred, and then rated each coffee. They were told (in lure) that one of the cups contained “eco-friendly” coffee while the other did not, although the two cups contained identical coffee. In Experiments 1 and 3, but not in Experiment 2, the participants were also told which cup contained which type of coffee before they tasted. The participants preferred the taste of, and were willing to pay more for, the “eco-friendly” coffee, at least those who scored high on a questionnaire on attitudes toward sustainable consumer behavior (Experiment 1). High sustainability consumers were also willing to pay more for “eco-friendly” coffee, even when they were told, after their decision, that they preferred the non-labeled alternative (Experiment 2). Moreover, the eco-label effect does not appear to be a consequence of social desirability, as participants were just as biased when reporting the taste estimates and willingness to pay anonymously (Experiment 3). Eco labels not only promote a willingness to pay more for the product but also lead to a more favorable perceptual experience of it.     

Experience‐ and age‐mediated oviposition behaviour in the yellow fever mosquito Stegomyia aegypti (=Aedes aegypti)

In repeated behaviours such as those of feeding and reproduction, past experiences can inform future behaviour. By altering their behaviour in response to environmental stimuli, insects in highly variable landscapes can tailor their behaviour to their particular environment. In particular, female mosquitoes may benefit from plasticity in their choice of egg‐laying site as these sites are often temporally variable and clustered. The opportunity to adapt egg‐laying behaviour to past experience also exists for mosquito populations as females typically lay eggs multiple times throughout their lives. Whether experience and age affect egg‐laying (or oviposition) behaviour in the mosquito Stegomyia aegypti (=Aedes aegypti) (Diptera: Culicidae) was assessed using a wind tunnel. Initially, gravid mosquitoes were provided with a cup containing either repellent or well water. After ovipositing in these cups, the mosquitoes were blood‐fed and introduced into a wind tunnel. In this wind tunnel, an oviposition cup containing repellent was placed in the immediate vicinity of the gravid mosquitoes. A cup containing well water was placed at the opposite end of the tunnel so that if the females flew across the chamber, they encountered the well water cup, in which they readily laid eggs. Mosquitoes previously exposed to repellent cups became significantly more likely to later lay eggs in repellent cups, suggesting that previous experience with suboptimal oviposition sites informs mosquitoes of the characteristics of nearby oviposition sites. These results provide further evidence that mosquitoes modify behaviour in response to environmental information and are demonstrated in a vector species in which behavioural plasticity may be ecologically and epidemiologically meaningful.     

Aedes albopictus oviposits with other Aedes species in artificial oviposition cups: a case study in Knox County,Tennessee, U.S.A.

Interspecific associations between two mosquito species can lead to effects such as competition, species displacement, and species stability. To better understand Aedes albopictus (Skuse) and other Aedes species, we monitored eggs in artificial oviposition cups (ovitraps) within Knox County, TN, U.S.A., during the 2016 and 2017 mosquito seasons. In 2016, one black and one white ovitrap were placed at 18 sites for 21 weeks, while in 2017 black and white ovitraps baited with grass‐infused or deionized water were placed at 11 sites for nine weeks. Eggs were identified to species and resulting counts were used to determine the degree of interspecific association using Cole's coefficients (C₇) and the degree of heterogeneity across space and time using generalized linear mixed models (GLMM). Here, Aedes mosquitoes are generally ovipositing in black cups with grass‐infused water, and Ae. albopictus eggs co‐occurred with other Aedes species more often than would be expected. Finding a positive significant interspecific association between Ae. albopictus and other Aedes eggs suggests that methods used to control Ae. albopictus may also control other Aedes mosquitoes. Finding that Ae. albopictus co‐occurs with other Aedes mosquitoes warrants additional research to evaluate outcomes associated with co‐occurrence within the study area.     

Advances in rearing ofLixophaga diatraeae [Dipt.: Tachinidae]

Larvae ofDiatraea saccharalis (F) were reared on artificial diet in 30-ml cups (1–3 larvae/cup). Adults of the larviparous tachinid parasite,Lixophaga diatraeae (Townsend), were removed from emergence and holding cages with a modified vacuum sweeper. Maggots were extracted from 10 to 14-day-old female flies, that had been disinfected with 1% NaOCl by one of two methods. In method I, fly uteri were removed and placed in a 10-ml vial containing a 0.15% agar-water solution with 3–4 glass beads; rapid vibration of the vial ruptured the uteri and distributed the maggots in the agar solution. In method 2, whole flies were blended with 50-ml water in a blender, and maggots were separated from fly particles by screening; then they were suspended in the agar solution. A procedure was devised for determining the number of maggots obtained by each method. The maggot-agar solution was injected into cups containing host larvae and maggots sought out and parasitized the host larvae; however, the percentage producing puparia generally decreased with increases of host larva and/or maggot density. Puparia were harvested from cups by hand and washed in 1% NaOCl to disinfect and destroy host larval webbing.     

Is it possible to replace stimulus animals by scent-filled cups in the social discrimination test?

A study in which the rat social discrimination test was refined is described. This test measures social memory by using, in general, juvenile rats as stimulus animals. Rats are offered a first juvenile to investigate (learning trial), and after a specified interval, the rats are offered the same rat and a second juvenile rat to investigate again (retrieval trial). When the rats sniff the second juvenile in the retrieval trial more than the first, social memory for the second juvenile is said to be present. This test is mainly based on scents from the juvenile. Attempts were made to refine the test to reduce the number of animals used, to enhance the scope of the test, and to improve its validity. Firstly, the stimulus animals were replaced by the scent of juveniles, in the form of cups filled with sawdust taken from cages of juvenile rats. Similar results to those in the original test were obtained when using these scents. Furthermore, male and female scents were tested, and showed the same results as for the juvenile scents. Secondly, rats were also given two cups (one scent-filled and one filled with plain sawdust) in the learning trial, to determine which allowed a more-precise delineation of motivational, discriminatory and memory components. Overall, it is possible to replace stimulus animals by scent-filled cups in the social discrimination test, to enhance the scope of the test, and to draw more-valid conclusions with respect to social memory.     

Aedes albopictus (Diptera: Culicidae) oviposition response to organic infusions from common flora of suburban Florida

We evaluated the oviposition response of gravid Aedes albopictus (Skuse) to six organic infusions. Laboratory and field‐placed oviposition cups baited with water oak (Quercus nigra L.), longleaf pine (Pinus palustris P. Mill), or St. Augustine grass (Stenotaphrum secundatum (Walt.) Kuntze), as well as binary infusion mixtures of each, were used. In addition, a triple‐cage, dual port olfactometer was used to measure upwind response of gravid individuals to these infusions. We found that Ae. albopictus deposited more eggs in infusion‐baited cups compared with water alone. Moreover, significantly more eggs were laid in the water oak and a water oak‐pine mixture as compared with the St. Augustine grass infusion in laboratory bioassays. However, a negative upwind response was observed with longleaf pine infusion in the olfactometer. In field cages, significantly more eggs were deposited in infusion‐baited cups as compared with water alone and a greater percentage of eggs were deposited in cups containing a water oak and the water oak‐longleaf pine mixture as compared with cups containing single infusions or their mixtures.     

Effects of 8-week strength training with two models of chest press machines on muscular activity pattern and strength.

The purposes of this study were to assess: (i) the effects of 8-week training programs with constrained-path and unconstrained-path chest press machines on 1-RM; (ii) the different activity patterns of selected arm and shoulder girdle muscles during push movement performed on the different machines; (iii) the transfer of the training effects from one machine to the other. Twenty healthy, sedentary women (mean+/-SD age, 24.8+/-1.0yrs), randomized to either the FM or CM strength training protocols were evaluated before and after the strength training program. Muscular activity signals were recorded by surface electromyography (sEMG) from eight muscles while each subject performed the exercise on each machine. Muscle strength was defined by a 1 repetition maximum (1-RM) test for each subject on each machine. Both machines were effective in improving 1-RM, but the 1-RM increased more in the FM than the CM. Adaptive change in the sEMG was observed in all muscles after training on the FM machine, but not within the stabilizers when training on the CM machine. The results suggest that training in an unconstrained condition provides a more effective method for improving inter-muscular coordination via adaptation of the motor strategy aimed at optimising muscular efforts.     

Oxidation in ultrahigh molecular weight polyethylene and cross-linked polyethylene acetabular cups tested against roughened femoral heads in a hip joint simulator

This study was aimed at comparing the oxidative degradation of commercial acetabular cups made of cross-linked polyethylene (XLPE) and conventional ultrahigh molecular weight polyethylene (UHMWPE). After testing against deliberately scratched CoCrMo femoral heads in a hip joint simulator, the cups, microtomed parallel to the articulating surface, were analyzed by IR spectroscopy. Due to the potential for artifacts caused by absorbed contaminants, the IR spectra were compared only after hexane extraction; actually, XLPE was found to absorb more serum than UHMWPE. The two sets of unworn acetabular cups showed different oxidation patterns with consequently different distributions of carbonyl species; unworn XLPE was characterized by lower contents of carbonyl species and hydrogen-bonded alcohols and higher contents of trans-vinylene species than unworn UHMWPE. Upon simulator testing, UHMWPE showed more significant changes in oxidation indexes and distribution of carbonyl compounds than XLPE, confirming a better wear behavior for XLPE under the adopted testing conditions.     

Reusable vs. disposable cups revisited: guidance in life cycle comparisons addressing scenario,model, and parameter uncertainties for the US consumer

Purpose

Despite interest in an environmentally conscious decision between disposable and reusable cups, a comprehensive and current study for US consumers is not yet available. Guidance in favor of single-use cups rely on outdated or non-ISO-compliant results with limited uncertainty information. Such claims are insufficiently generalizable. This article delivers an updated comparative life cycle impact assessment of reusable ceramic cups and single-use expanded polystyrene cups.

Methods

The ReCiPe midpoint model was selected. Scenario uncertainties are addressed by evaluating compliant standard dishwashing appliance models from 2004 to 2013 used in 26 US subregional utility grids. A utility snapshot from 2009 is applied with extension to recent shifts in generation from increased penetration of natural gas and renewable energy. Parameter uncertainty is quantified through statistical methods.

Results

Where there is statistical difference, results almost entirely favor reusable cups in the USA. For climate change, 16 % of users have higher impact for ceramic cups washed in 2013 by minimally compliant dishwashers. Higher climate change impacts for 32 % of reusable cup users is indicated with 2004 average dishwashers, though using a cup twice between washes shifts the impact in favor of the reusable cup.

Conclusions

Disposable cup scenarios do not account for film sleeves, lids, printing, and less conservative shipping weights and distances and therefore reflect a best case scenario. Impact for reusable cups is expected to decrease further as the electricity mix becomes less CO₂-intensive with replacement of coal-fired generators by natural gas, wind, and solar and as less efficient dishwashers are replaced with new units compliant to current laws.     

Design, construction and modularity of pressure-fit acetabular cups]

To enable a comparison of different pressfit acetabular cups objective criteria are essential. The aim of this study is to describe the design features of this type of cup and to analyse currently available cups. 30 implants were systematically measured and analysed. The mean surface roughness (Ra) was determined and configurations established with the light section technique. For further evaluation the cups were transversely sectioned. The cups are made of pure titanium, titanium alloy or polyethylene coated with titanium. Five implants take the form of monoblocks. The configuration is predominately (n = 25) flattened spherical. The size of eight cups corresponds to the outer diameter, 19 cups have a larger outer diameter (overdimensioning), 3 cups have a smaller outer diameter (underdimensioning). The magnitude of overdimensioning is, on average, 1.9%. 9 cups are provided with plugs, hollow cylinders, fins or rings as outer stabilizers. Surface roughness achieved with corundum blasting is 6.8 microns. Titanium porous-coated implants have a surface roughness of 21-32 microns. 24 cups have polyethylene inserts, most of which are snap-fixed with equatorial lips. For 16 cups, full-ceramic inserts are available. 4 cups have a metal insert. Titanium implants with structured or HAC-coated surfaces have become the accepted standard for cementless acetabular cup implantation. Together with ceramic, metal, or modified polyethylene inserts they meet the requirement for permanent osteo-integrative stability.