Rates of glucose oxidation with a column reactor utilizing a magnetic field

Rates of glucose oxidation were measured with the use of a fluidized-bed column placed in a magnetic field and magnetite-containing beads of immobilized glucose oxidase and catalase. Its performance was predicted from the volumetric coefficient for liquid-phase mass transfer and the kinetic constants for glucose oxidation. Effusion of beads was negligible under the operating conditions employed.     

Effects of immobilization on the kinetics of enzyme-catalyzed reactions. I. Glucose oxidase in a recirculation reactor system.

Glucose oxidase from Aspergillus niger was immobilized on nonporous glass beads by covalent bonding and its kinetics were studied in a packed-column recycle reactor. The optimum pH of the immobilized enzyme was the same as that of soluble enzyme; however, immobilized glucose oxidase showed a sharper pH-activity profile than that of the soluble enzyme. The kinetic behavior of immobilized glucose oxidase at optimum pH and 25 degrees C was similar to that of the soluble enzyme, but the immobilized material showed increased temperature sensitivity. Immobilized glucose oxidase showed no loss in activity on storage at 4 degrees C for nearly ten weeks. On continuous use for 60 hr, the immobilized enzyme showed about a 40% loss in activity but no change in the kinetic constant.     

Performance of fluidized-bed reactors utilizing magnetic fields

The performance of fluidized-bed reactors utilizing a magnetic field was determined by the use of magnetite-containing beads of immobilized unease. The reactors showed similar or higher conversions in comparison with fixed-bed reactors, although some aggregation of the beads in the magnetic field was observed. No effusion of the beads occurred up to a flow rate of 24 cm/min.     

Performance of rotating packed disk reactor with immobilized glucose oxidase

Summary Reactor performance was studied to investigate whether a rotating packed disk reactor (RPDR) can be used for the enzymatic oxidation of biochemicals. The disks were packed with calcium alginate beads with immobilized glucose oxidase and catalase, which catalyze the reaction of glucose and oxygen. The production rate of gluconic acid increased with the speed of rotation and the bulk flow rate. An optimum submergence for maximum productivity existed.     

Synthesis of 7-Desoxypanepoxydol

Glucose oxidase was immobilized on the surface of a p-benzoquinone-carbon paste electrode by coating the enzyme-loaded surface with a nitrocellulose film. The electrode was able to oxidize glucose electrocatalytically. It showed high current response to glucose, and was stable for more than a week. The electrode can be used as a glucose sensor that is relatively insensitive to variations of oxygen tension in sample solutions.     

Enzymatic conversion of rifamycin B in a rotating packed disk reactor

The biological conversion of rifamycin B to rifamycin S was attempted using immobilized rifamycin B oxidase in a rotating packed disk reactor (RPDR). Humicola sp. (ATCC 20620) was treated with acetone and the cell powder was immobilized with cellulose acetate. The three phase reaction involving oxygen, substrate, and the immobilized enzyme beads was done in the RPDR.The physical strength of the immobilized enzyme beads was very good and was suitable as packing material in RPDR. The optimum submergence in the RPDR was 0.5 and the rotating speed of the disk did not affect the conversion very much. In continuous operation as the residence time increased, the conversion of rifamycin B increased, but the productivity decreased.     

Determination of glucose diffusion coefficients in biofilms with micro-electrodes

A glucose micro-electrode was developed for direct measurements inside biofilms, and applied for the determination of effective diffusion coefficients in a model system of agar beads containing immobilized yeast cells. Two methods were used, one based on concentration gradients present at the liquid/solid interface of an active biofilm under steady-state conditions, the other based on the rate of glucose redistribution in an inactivated biofilm under transient-state conditions. Additional measurements with pH and oxygen micro-electrodes were performed and thus allowed for in-situ correction of the glucose electrode signal. From the micro-electrode measurements in the model system it was concluded that the glucose micro-sensor is a useful tool with which to obtain effective diffusion coefficients in biofilms.     

Immobilization of glucose oxidase on polymer membranes treated by low-temperature plasma

Low-temperature plasma was employed for activation of polymer membranes as a carrier for enzyme immobilization. Glucose oxidase was immobilized on polypropylene (PP), polyvinylidene fluoride (PVDF), or polytetrafluoroethylene (PTFE) membrane surfaces treated by nitrogen or ammonia gas plasma using glutaraldehyde as a linking agent. Enzyme activity was evaluated by the response of glucose sensor composed of the immobilized enzyme membrane and a dissolved oxygen electrode. The sensor response was found to depend on the kind of carrier membrane and to become maximum at suitable conditions of plasma treatment.     

Optimal covalent immobilization of glucose oxidase-containing liposomes for highly stable biocatalyst in bioreactor

The glucose oxidase-containing liposomes (GOL) were prepared by entrapping glucose oxidase (GO) in the liposomes composed of phosphatidylcholine (PC), dimyristoyl L-alpha-phosphatidylethanolamine (DMPE), and cholesterol (Chol) and then covalently immobilized in the glutaraldehyde-activated chitosan gel beads. The immobilized GOL gel beads (IGOL) were characterized to obtain a highly stable biocatalyst applicable to bioreactor. At first, the glutaraldehyde concentration used in the gel beads activation as well as the immobilizing temperature and time were optimized to enhance the immobilization yield of the GOL to the highest extent. The liposome membrane composition and liposome size were then optimized to obtain the greatest possible immobilization yield of the GOL, the highest possible activity efficiency of the IGOL, and the lowest possible leakage of the entrapped GO during the GOL immobilization. As a result, the optimal immobilization conditions were found to be as follows: the liposome composition, PC/DMPE/Chol = 65/5/30 (molar percentage); the liposome size, 100 nm; the glutaraldehyde concentration, 2% (w/v); the immobilizing temperature, 4 degrees C; and the immobilizing time, 10 h. Furthermore, the optimal IGOL prepared were characterized by its rapidly increasing effective GO activity to the externally added substrate (glucose) with increasing temperature from 20 to 40 degrees C, and also by its high stability at 40 degrees C against not only the thermal denaturation in a long-term (7 days) incubation but also the bubbling stress in a bubble column. Finally, compared to the conventionally immobilized glucose oxidase (IGO), the higher operational stability of the optimal IGOL was verified by using it either repeatedly (4 times) or for a long time (7 days) to catalyze the glucose oxidation in a small-scale airlift bioreactor.     

Tonometric biosensor with a differential pressure sensor for chemo-mechanical measurement of glucose

A tonometric biosensor for glucose was constructed using a chemo-mechanical reaction unit and a differential pressure sensor. The reaction unit was fabricated by using both liquid and gas cells separated by an enzyme diaphragm membrane, in which glucose oxidase was immobilized onto the single (gas cell) side of the dialysis membrane. By applying glucose solution (0, 25.0, 50.0, 100, 150 and 200 mmol/l) into the liquid cell of the chemo-mechanical reaction unit, the pressure in the gas cell decreased continuously with a steady de-pressure slope because the oxygen consumption in the gas cell was induced by the glucose oxidase (GOD) enzyme reaction at the enzyme side of the porous diaphragm membrane. The steady de-pressure slope in the gas cell showed the linear relationship with the glucose concentration in the liquid cell between 25.0 and 200.0 mmol/l (correlation coefficient of 0.998). A substrate regeneration cycle coupling GOD with l-ascorbic acid (AsA: 0, 1.0, 3.0, 10.0 and 50.0 mmol/l; as reducing reagent system) was applied to the chemo-mechanical reaction unit in order to amplify the output signal of the tonometric biosensor. 3.0 mmol/l concentration of AsA could optimally amplify the sensor signal more than 2.5 times in comparison with that of non-AsA reagent.     

Inner epidermis of onion bulb scale: As natural support for immobilization of glucose oxidase and its application in dissolved oxygen based biosensor

Inner epidermal membrane of the onion bulb scales was studied as a natural polymer support for immobilization of the glucose oxidase (GOD) enzyme for biosensor application. Onion epidermal membrane was used for immobilization of glucose oxidase and was associated with dissolved oxygen (DO) probe for biosensor reading. Glucose was detected on the basis of depletion of oxygen, when immobilized GOD oxidizes glucose into gluconolactone. A wide detection range between 22.5 and 450 mg/dl was estimated from calibration plot. A single membrane was reused for 127 reactions with retention of approximately 90% of its initial enzyme activity. Membrane was stable for 45 days ( approximately 90% activity) when stored in buffer at 4 degrees C. Surface structure studies of the immobilized membranes were carried under SEM. To our knowledge, this is the first report on employing inner epidermal membrane of onion bulb scales as the solid support for immobilization of enzyme.     

Effect of enzyme-matrix composition on potentiometric response to glucose using glucose oxidase immobilized on platinum

Glucose oxidase (beta-D-glucose:oxygen 1-oxidoreductase, EC 1.1.3.4) was immobilized in a crosslinked matrix of bovine serum albumin, catalase, glucose oxidase and glutaraldehyde on platinum foil. When placed in glucose solution, this enzyme-electrode elicited a potentiometric response that varied with the changes in glucose concentration. The immobilized glucose oxidase was present at 7.4-10.1 micrograms enzyme protein/ml of matrix, as determined with 125I-labelled enzyme. The coupled enzyme activity was stable over 120 h; however, the apparent activity of the immobilized glucose oxidase was markedly less than that for the same amount of enzyme free in solution. This indicated a significant level of diffusional resistance within the enzyme-matrix. The potentiometric response to glucose increased significantly as either the thickness of the enzyme-matrix or the glutaraldehyde content was reduced; this also was attributed to diffusional effects. Several enzyme-electrodes, constructed without exogenous catalase and with different amounts of glucose oxidase, showed greater sensitivity in potentiometric response at low glucose oxidase loadings. These results are consistent with the hypothesis that the potentiometric response arises from an interfacial reaction involving a hydrogen peroxide redox couple at a platinum surface. The data also suggest that an optimum range of hydrogen peroxide concentration exists for maximum electrode sensitivity.     

Enzyme microgels in packed-bed bioreactors with downstream amperometric detection using microfabricated interdigitated microsensor electrode arrays.

In this article, we describe the use of pH- responsive hydrogels as matrices for the immobilization of two enzymes, glucose oxidase (GOx) and glutamate oxidase (GlutOx). Spherical hydrogel beads were prepared by inverse suspension polymerization and the enzymes were immobilized by either physical entrapment or covalent immobilization within or on the hydrogel surface. Packed-bed bioreactors were prepared containing the bioactive hydrogels and these incorporated into flow injection (FI) systems for the quantitation of glucose and monosodium glutamate (MSG) respectively. The FI amperometric detector comprised a microfabricated interdigitated array within a thin-layer flow cell. For the FI manifold incorporating immobilized GOx, glucose response curves were found to be linear over the concentration range 1.8-280 mg dL(-1) (0.1-15.5 mM) with a detection limit of 1.4 mg dL(-1) (0.08 mM). Up to 20 samples can be manually analyzed per hour, with the hydrogel-GOx bioreactor exhibiting good within-day (0.19%) precision. The optimized FI manifold for MSG quantitation yielded a linear response range of up to 135 mg dL(-1) (8 mM) with a detection limit of 3.38 mg dL(-1) (0.2 mM) and a throughput of 30 samples h(-1). Analysis of commercially produced soup samples gave a within-day precision of 3.6%. Bioreactors containing these two physically entrapped enzymes retained > 60% of their initial activities after a storage period of up to 1 year.     

High-yield method for immobilization of enzymes

Two types of polyethylenimine-coated glass microbeads (13–44 μm) were synthesized and used for the immobilization of glucose oxidase from Aspergillus niger and catalase from A. niger and beef liver. The two types of beads were distinguishable by differences in their surface topography. Immobilizations were performed by adsorption followed by treatment with glutaraldehyde. The immobilized-enzyme activities per unit support of all of the enzymes tested were compared with and found to be superior to the immobilized activities attainable on aminopropyl-activated glass microbeads. When enzyme was present in less than saturating amounts, the coated beads were able to remove 100% of the glucose oxidase activity initially present in the immobilization solution, with 78–87% of that activity expressed on the support surface. Bound glucose oxidase was more stable to thermal inactivation than native enzyme.     

The Application of Chemiluminescence of a Cypridina Luciferin Analog to Immobilized Enzyme Sensors

Chemiluminescence of a Cypridina luciferin analog, 2-methyl-6-phenyl-3,7-dihydro-imidazo[l,2-a]pyrazin-3-one, was applied to immobilized enzyme sensors. Xanthine oxidase, peroxidase, glucose oxidase, uricase and cholesterol oxidase were immobilized by using photo-crosslinkable resin prepolymer or ion-exchangeable cellulose beads. The immobilized enzyme sensor system was composed of a photoncounter and a test tube in which the immobilized enzyme membrane or particles were placed. A linear relation between the concentration of substrates and luminescence rate was obtained on a logarithmic scale. This immobilized enzyme sensor system could be used repeatedly. Hydrogen peroxide, xanthine and hypoxanthine were measured sensitively and rapidly within 100 sec. Glucose, cholesterol and uric acid were measured sensitively within 10 min but could be measured within 100 sec, although less sensitive. The detection limits for xanthine, hypoxanthine, hydrogen peroxide, glucose, cholesterol and uric acid were 0.02, 0.02, 0.2, 0.4, 2 and 2 μM, respectively. Concentrations of hypoxanthine in tuna muscle, and glucose and cholesterol in serum measured using this sensor system were comparable with those measured by the standard methods.     

Biosensor system for continuous flow determination of enzyme activities. I. Determination of glucose oxidase and lactic dehydrogenase activities

A biosensor system for continuous flow determination of enzyme activity was developed and applied to the determination of glucose oxidase and lactic dehydrogenase activities. The glucose oxidase activity sensor was prepared from the combination of an oxygen electrode and a flow cell. Similarly, the lactic dehydrogenase activity sensor was prepared from the combination of a pyruvate oxidase membrane, an oxygen electrode, and a flow cell. Pyruvate oxidase was covalently immobilized on a membrane prepared from cellulose triacetate, 1,8-diamino-4-aminomethyloctane, and glutaraldehyde. Glucose oxidase activity was determined from the oxygen consumed upon oxidation of glucose catalyzed by glucose oxidase. Lactic dehydrogenase activity was determined from the pyruvic acid formed upon dehydrogenation of lactic acid catalyzed by lactic dehydrogenase. The amount of pyruvic acid was determined from the oxygen consumed upon oxidation of pyruvic acid by pyruvate oxidase. Calibration curves for activity of glucose oxidase and lactic dehydrogenase were linear up to 81 and 300 units, respectively. One assay could be completed within 15 min for both sensors and these were stable for more than 25 days at 5°C. The relative errors were ±4 and ±6% for glucose oxidase and lactic dehydrogenase sensors, respectively. These results suggest that the sensor system proposed is a simple, rapid, and economical method for the determination of enzyme activities.     

Glucose sensor based on nano-baskets of tin oxide templated in porous alumina by plasma enhanced CVD

A feasibility study of glucose oxidase (GOx) immobilized tin oxide thin films, consisting of nano-baskets, for glucose sensing is presented. The nano-baskets of SnO(2) were grown on in-house fabricated anodized aluminum oxide pores of approximately 80-nm diameter using plasma enhanced chemical vapor deposition (PECVD) at an RF power of 60W. Hydrated stannic chloride was used as a precursor and O(2) (20 sccm) as a reactant gas. The deposition was carried out from 350 to 450 degrees C at a pressure of 0.2 Torr for 15 min each. Deposition at 450 degrees C resulted in crystalline film with basket-like (nano-sized) structure. GOx was immobilized by physical adsorption (soaking films in GOx solution containing 1000 units for 3h). Increase in film conductivity was noticed after GOx immobilization. The immobilized films were found sensitive to glucose (C(2)H(12)O(6), dextrose) concentration from 10 to 360 mg/dl. Sensitivity increases linearly with glucose concentration. Nano-baskets resulted in higher sensitivity in comparison with other structures. From the elemental analyses of the films after GOx immobilization, GOx was found covalently attached with tin oxide, as evident by N 1s peak in the photoelectron spectra. A possible sensing mechanism is presented and discussed.     

On-line determination of glucose and lactate concentrations in animal cell culture based on fibre optic detection of oxygen in flow-injection analysis.

A flow-injection analysis (FIA) system based on fibre optic detection of oxygen consumption using immobilized glucose oxidase (GOD) and lactate oxidase (LOD) is described for the on-line monitoring of glucose and lactate concentrations in animal cell cultures. The consumption of oxygen was determined via dynamic quenching by molecular oxygen of the fluorescence of an indicator. GOD and LOD were immobilized on controlled pore glass (CPG) in enzyme reactors which were directly linked to a specially designed fibre optic flow-through cell covering the oxygen optrode. The system is linear for 0-30 mM glucose, with an r.s.d. of 5% at 30 mM (five measurements) and for 0-30 mM lactate, with an r.s.d. of 5% at 30 mM (five measurements). The enzyme reactors used were stable for more than 4 weeks in continuous operation, and it was possible to analyse up to 20 samples per hour. The system has been successfully applied to the on-line monitoring of glucose and lactate concentrations of an animal cell culture designed for the production of recombinant human antithrombine III (AT-III). Results of the on-line measurement obtained by the FIA system were compared with the off-line results obtained by a glucose and lactate analyser from Yellow Springs Instrument Company (YSI).     

The potential use of silicon compounds as oxygen carriers for free and immobilized cells containing l-amino acid oxidase

Summary The relatively low solubility of oxygen in water presents a problem in particular when immobilized cells are used or enzymes are applied for oxygen dependent reactions. The other main purpose is the requirement of oxygen for the increase of biomass. In this investigation the usefulness of silicon emulsions as oxygen carriers is demonstrated.In case of l-amino acid oxidase activity of immobilized cells, an increase by a factor of four was found in the presence of silicon emulsions. Likewise, growth medium enriched with silicon emulsions showed a significantly increased growth of cells inside alginate beads compared to normal growth medium.     

The immobilization of microbial cells, subcellular organelles, and enzymes in calcium alginate gels.

Saccharomyces cerevisiae cells, Kluyveromyces marxianus cells, inulase, glucose oxidase, chloroplasts, and mitochondria were immobilized in calcium alginate gels. Ethanol production from glucose solutions by an immobilized preparation of S. cerevisiae was deomonstrated over a total of twenty-three days, and the half-life of such a preparation was shown to be about ten days. Immobilized K. marxianus, inulase, and glucose oxidase preparations were used to demonstrate the porosity and retraining properties of calcium alginate gels. Calcium alginate-immobilized chloroplasts were shown to perform the Hill reaction. Some experiments with immobilized mitochondria are reported.