Structural adaptations of the femur and humerus to arboreal and terrestrial environments in three species of macaque

One reason to measure cross-sectional structural properties of primate long bones is to define mechanically relevant complexes of traits that describe the adaptation of bone to different biomechanical environments. This can be effectively accomplished when congeneric species having different postural and locomotor behaviors are compared. This paper compares the cross-sectional geometry of the femur and humerus in three behaviorally different macaque species as a basis for defining such patterns. Cross-sectional moments of inertia in the standard anatomical planes were calculated at five locations along the diaphyses of the femur and humerus in Macaca fascicularis, M. nemestrina, and M. mulatta. The data suggest that the "barrel-shaped" femur is associated with behaviors for which long limbs and small body size are an asset. This may be associated with, but is not restricted to, leaping behaviors. The data also suggest that structural rigidity of the femur and humerus is greater per unit body weight in primates that spend significant amounts of time in terrestrial environments than in those that are more restricted to climbing in arboreal environments.     

Diachronic patterns of change in structural properties of the femur in the prehistoric American Southwest

Diachronic patterns of change in the femoral diaphysis are examined in archaeological skeletal samples from the American Southwest. Three cultural periods differing in subsistence-settlement strategies are represented: Early Villages (A.D. 500-1150), Abandonments (A.D. 1150-1300), and Aggregated Villages (A.D. 1300-1540). Relevant properties of cross-sectional geometry and bone density were obtained using computerized tomography. Temporal trends in geometry suggest that activity levels increased between Early Villages and Abandonments, then declined during Aggregated Villages. In both sexes, femoral shape became more circular, and bending stresses were reduced in the a-p plane through time. Compared to the other periods, bone density was the lowest during Abandonments in both sexes. The reduction in bone density may reflect declining nutritional quality through time that was especially poor during the Abandonments period. Patternings in sexual dimorphism suggest that Abandonments males may have been more sensitive to nutritional stress than contemporary females.     

Cross-sectional geometry of Pecos Pueblo femora and tibiae—A biomechanical investigation: I. Method and general patterns of variation

Variation in long bone cross-sectional geometry can be given a more precise functional interpretation using engineering beam theory. However, difficulties in measurement technique have generally prevented studies of large samples of cross sections in this way. In the present study, an automated system utilizing an electronic digitizer and computer software was used to analyze cross-sectional geometric properties of 11 femoral and tibial locations in 119 individuals from the Pecos Pueblo, New Mexico site. The data generated allow identification of clear differences in geometric properties between different regions of the femur and tibia. These differences appear to be related to specific in-vivo mechanical loadings of the lower limb bones, serving to reduce stress and strain under these loadings. The data are also used to investigate possible differences in loading of the femur and tibia in the Pecos and modern samples, and between humans and a nonhuman primate sample.     

Computed tomography and automated image analysis of prehistoric femora

Non-invasive characterization of limb bone cross-sectional geometry would be useful for biomechanical analyses of skeletal collections. Computed tomography (CT) is potentially the method of choice. Additionally, CT images are suitable for automated analysis. CT is here shown to be both accurate and precise in the analysis of cross-sectional geometry of prehistoric femora. Beam hardening artifacts can be reduced by using a water bath. As the availability of CT for research increases, both bone density and geometry could be determined simultaneously with this method.     

Relationship between the shape and density distribution of the femur and its natural frequencies of vibration

It has been recently suggested that mechanical loads applied at frequencies close to the natural frequencies of bone could enhance bone apposition due to the resonance phenomenon. Other applications of bone modal analysis are also suggested. For the above-mentioned applications, it is important to understand how patient-specific bone shape and density distribution influence the natural frequencies of bones. We used finite element models to study the effects of bone shape and density distribution on the natural frequencies of the femur in free boundary conditions. A statistical shape and appearance model that describes shape and density distribution independently was created, based on a training set of 27 femora. The natural frequencies were then calculated for different shape modes varied around the mean shape while keeping the mean density distribution, for different appearance modes around the mean density distribution while keeping the mean bone shape, and for the 27 training femora. Single shape or appearance modes could cause up to 15% variations in the natural frequencies with certain modes having the greatest impact. For the actual femora, shape and density distribution changed the natural frequencies by up to 38%. First appearance mode that describes the general cortical bone thickness and trabecular bone density had one of the strongest impacts. The first appearance mode could therefore provide a sensitive measure of general bone health and disease progression. Since shape and density could cause large variations in the calculated natural frequencies, patient-specific FE models are needed for accurate estimation of bone natural frequencies.     

Crown dimensions of deciduous teeth of prehistoric and living populations of western India

Deciduous tooth crown dimensions are poorly known for the people of South Asia. This contribution describes dental crown dimensions of two prehistoric and one living population from the northwestern region of the subcontinent.     

Relative strength of the tibia and fibula and locomotor behavior in hominoids

The fibula has rarely been considered in comparative morphological studies, probably due to its relatively minor role in carrying mechanical loads. However, some differences in morphology (and inferred function) of the fibula between humans and apes, and within apes, have been noted and related to differences in positional behavior. Therefore, the study of tibiofibular relations may be useful in characterizing such differences. This study examines cross-sectional geometric (CSG) properties (cortical area and polar section modulus, Z(p)) of the tibia and fibula at mid-diaphysis across a sample (n=87) of humans, chimpanzees, gorillas, orangutans, and gibbons. The fibula is compared against the tibia in the different taxa. The results indicate that the robusticity of the fibula relative to that of the tibia can be explained in terms of differences in positional behavior. In particular, hominoids that are more arboreal (i.e., gibbons, orangutans, and chimpanzees) possess a relatively more robust fibula than do hominoids that are more terrestrial (i.e., gorillas and humans). The difference appears to be a consequence of the more mobile fibula and more adducted position of the hindlimb necessary in an arboreal environment. Apart from providing the first CSG data on the fibula, these results may be helpful in reconstructing the locomotor behavior of fossil hominoids.     

Sex differences in bone resorption in the mouse femur

Summary In male and female dd-mice at 4, 7, and 14 weeks of age and in 7 and 14-week-old mice gonadectomized at 4 weeks of age, the number of osteoclasts and the number and size of bone resorption areas along the surface of bone trabeculae in the distal metaphysis of the femur were determined. Osteoclasts were counted at the light-microscopic level in paraffin sections of decalcified femora. The number and size of the bone resorption areas were examined by scanning electron microscopy of femora after removing organic material by means of KOH and NaOCl treatment. In untreated mice, the number of osteoclasts and the number and size of bone resorption areas showed no sex differences at 4 weeks of age but were larger in females than males at 7 and 14 weeks of age. In gonadectomized mice, the number of osteoclasts and the bone resorption areas increased in males and decreased in females. The results of the gonadectomy experiments suggest that bone resorption in young adult mice is stimulated by female sex hormone and inhibited by male sex hormone.     

Structural changes in the femur with the transition to agriculture on the Georgia coast

Structural characteristics of the femur are compared in preagricultural (2200 B.C.–A.D. 1150) and agricultural (A.D. 1150–1550) subsistence strategy groups from the Georgia coast. Using an automated technique, cross-sectional geometric properties used in structural analyses (areas, second moments of area) were determined at midshaft and distal to the lesser trochanter in 20 adults from each group. A significant decline in magnitude of almost every geometric property occurs in the agricultural group. The differences between groups are reduced but still significant for many properties after standardizing for bone length differences. In addition, a remodeling of the femoral cortex to one of relatively smaller medullary and subperiosteal diameter, as well as a more circular cross-sectional shape, is characteristic of agricultural femora. Thus, while the relative cross-sectional area of bone remains the same, the spatial distribution of bone area is different in the two groups. The results strongly suggest a relative reduction in mechanical loadings of the femur in the agricultural group, implying different levels and possibly types of activity involving the lower limb in the two groups. The data are also compared with similar data available for the Pecos Pueblo (agricultural) sample. The comparison indicates that types of activity may have been more similar in the two agricultural samples, but that general levels of activity were more similar in the Pecos Pueblo and Georgia coast preagricultural samples.     

Genetic polymorphism of alpha-1-antitrypsin in macaque species

Thirty-two phenotypes of alpha-1-antitrypsin (al-AT) controlled by 18 codominant alleles of PI_mac locus were identified by isoelectric focusing in 1.121 macaques of nine species. In terms of al-AT polymorphism macaque species vary markedly from nearly monomorphic (Macaca mulatta, M. arctoides) to highly polymorphic (M. nemestrina, M. fascicularis). Only 4 of 18 PI_mac alleles are common for two or more macaque species, the rest of the alleles are species-specific.     

Effects of intravenous epinephrine on macaque platelets

Blood was obtained from three species of macaques for a study of platelets. A rapidly mobilizable platelet pool was demonstrated in rhesus macaques given intravenous epinephrine. The number of platelets/ml of blood increased about 30% 3 to 5 min after epinephrine was given. The size distributions of the platelets were similar before and after injection. Platelet aggregability was increased after injection. Basal platelet aggregabilities, as measured by platelet aggregate ratios, were similar in rhesus macaques. Celebes black macaques, and human subjects, but were significantly greater in cynomolgus macaques than in the other three species.     

Postembryonic dimensional allometry of the human femur

Developmental constraints can affect evolution. McMahon's (1973, 1975a) hypothesis of elastic similarity is tested as an epigenetic rule. This is an ontogenetic hypothesis that previously has not been tested with ontogenetic data. Cross-sectional data from the human femur are analyzed. Length-diameter relationships for phases of growth and aging are calculated with bivariate allometry. McMahon's hypothesis cannot be rejected, although most of the calculations are not consistent with it. Ontogenetic skeletal allometry is complex because both material and geometric properties change during development.     

华南地区人口压力增长对猕猴(Macaca spp.)分布的影响

通过研究本世纪初和现今两个历史时期华南地区猕猴分布、人口和耕地变化发现,猕猴在本世纪初为随机分布,现今已为聚集分布。在现今生产力水平下,180人·km^-2是猕猴分布限量。本世纪初区内有猴分布的县(市)为61%,现今仅为23.47%.21世纪30年代前后预计尚余15.2%县(市)仍有猴分布,主要分布在湘西北、桂西及湘、桂、粤交界的南岭一带,琼西南尚余少数。     

Proximal femur articulation in Pliocene hominids

The supposed "nonhuman anthropoid"-type femur head articular surface described for the Pliocene hominid specimen A.L.288-1 ("Lucy") by Stern and Susman in 1983 is present in significant numbers of modern human femora. This nonmetric skeletal trait was also found to be sex-related in modern human samples examined.     

Hand dominance and bilateral asymmetry in the structure of the second metacarpal

Bilateral asymmetry in the structure of the second metacarpal was examined in relation to functional hand dominance in a large, clinically nonselected, healthy population sample from the Baltimore Longitudinal Study of Aging. Bilateral bone measurements were made from anteroposterior hand radiographs of a total of 992 individuals, 609 males and 383 females, with an age range of 19–94 years. Hand dominance was determined on the basis of personal impression. Total width and medullary width at the midshaft of the second metacarpal were measured to 0.05 mm using a Helios caliper. These two measurements were used to derive cortical thickness, cortical bone area, periosteal (total) area, medullary area, percent cortical area, and the second moment of area in the mediolateral plane. In both right and left-handed individuals, statistically significant side differences were found in the calculated bone areas and the second moment of area, with the dominant hand being larger. Cortical thickness did not show significant side-related differences for either handedness. These results show that functional handedness leads to periosteal and endosteal expansion of the second metacarpal cortex on the dominant side, increasing bone strength without increasing cortical thickness. This is the first time this pattern of asymmetry has been reported in left-handers as well as right-handers. Our results argue for the primacy of environmental (mechanical) effects in determining bilateral asymmetry of limb bone structural properties. © 1994 Wiley-Liss, Inc.     

Sex assessment of the femur: a test of a new method.

Simple and multiple discriminant functions using mid-shaft femoral circumference for the determination of sex were used to test a sexing method recently proposed by Black. The method was able to correctly assign sex for 82% of the sample, which consisted of 115 North American White femora of verified age and sex. Circumference proved as accurate as any other criteria that have been used in sexing the femur. This suggests a usefulness beyond the limited archaelogical scope originally proposed by Black.     

华南地区人口压力增长对猕猴（Macacaspp．）分布的影响

通过研究本世纪初和现今两个历史时期华南地区猕猴分布、人口和耕地变化发现,猕猴在本世纪初为随机分布,现今已为聚集分布．在现今生产力水平下,１８０人·ｋｍ－２是猕猴分布限量．本世纪初区内有猴分布的县（市）为６１％,现今仅为２３．４７％．２１世纪３０年代前后预计尚余１５．２％县（市）仍有猴分布,主要分布在湘西北、桂西及湘、桂、粤交界的南岭一带,琼西南尚余少数．     

The degree and pattern of phylogenetic signal in primate long-bone structure

Interspecific scaling is a fundamental tool for comparative studies of primate long-bone structure and adaptation. However, scaling analyses based on conventional statistical methods can lead to false positives regarding adaptive relationships when traits exhibit strong phylogenetic signal. This problem can be addressed through the use of phylogenetic comparative methods (PCMs). To date, PCMs have not been incorporated into comparative studies of primate long-bone structure because it has been assumed that long-bone structure is free of phylogenetic signal once appropriately scaled. To test this assumption, we evaluated the degree of phylogenetic signal in three types of long-bone structural traits (bone length, articular surface areas, and cross-sectional geometric properties) from 17 quadrupedal primate species. We compared the pattern of phylogenetic signal in raw trait values and residual trait values after regression against body mass, bone length, and the product of body mass x bone length. Our results show that significant phylogenetic signal is present in all traits before scaling, due in part to their strong covariance with body mass. After scaling, bone length still exhibits strong phylogenetic signal, but articular surface areas do not, and cross-sectional properties exhibit different levels of signal depending on the variable used to scale the data. These results suggest that PCMs should be incorporated into interspecific studies of bone length and perhaps cross-sectional geometric properties. Our results also demonstrate that tests for phylogenetic signal prior to implementing a PCM should focus on residual variance, not individual traits.     

The contribution of size and shape variation to patterns of sexual dimorphism of the human femur

The present research was undertaken to determine the relationship between patterns of generalized intrapopulational variation determined from principal components analysis and patterns of sexual dimorphism determined from Student's t and discriminant function analysis. The analysis was based upon 17 measurements of 97 femurs from a Middle Mississippian Amerindian population. The results of the principal components analysis indicated that the 17 original measurements could be represented as four principal component variates. Inspection of component loadings lent support to the contention that the first principal component reflected variation in general size while components two to four reflected variation in femoral shape. Analysis of the relationship between principal component loading and male-female differences reflected in Student's t demonstrated a high (0.97) positive correlation between absolute magnitude of loading in the first principal component and magnitude of Student's t. As a result, discriminant analyses of the femur, utilizing univariate criteria for the inclusion of variables, have been biased in the direction of size variation. Subsequent stepwise discriminant function analyses demonstrated that an adequate discriminant model must reflect all dimensions of morphological variation at the intrapopulational level.