A new sensor,the “filtration probe,” for quantitative characterization of the penicillin fermentation. I. Mycelial morphology and culture activity

In this article the filtration resistance of fungal (Penicillium) mycelia is shown to be quantitatively related to the morphology of the cells. On this basis, it was possible to determine the intracellular volume by simple filtration measurements. Since the dry weight of the cells can also be measured, a morphological variable-the “hyphae density” (dry weight hyphae/volume hyphae)-can be quantified. This variable typically is measured to have values in the range of 0.35–0.20 g/cm³; the lower values represent the final stages of the fermentation. It can be shown that this loss of cell material during fermentation is limited to cytoplasmic components, and that most (70%) of the components which disappear are proteins. Concurrent with and linearly related to this loss of proteins, the culture activity in terms of both cell maintenance energy (respiration activity) and penicillin synthesis also decreased. The hyphae density measured by filtration is therefore a direct measure of the metabolic potential of the organism.     

Conductive Li3.08Cr0.02Si0.09V0.9O4 Anode Material: Novel “Zero‐Strain” Characteristic and Superior Electrochemical Li+ Storage

“Zero‐strain” compounds are ideal energy‐storage materials for long‐term cycling because they present negligible volume change and significantly reduce the mechanically induced deterioration during charging–discharging. However, the explored “zero‐strain” compounds are very limited, and their energy densities are low. Here, γ phase Li_3.08Cr_0.02Si_0.09V_0.9O₄ (γ‐LCSVO) is explored as an anode compound for lithium‐ion batteries, and surprisingly its “zero‐strain” Li⁺ storage during Li⁺ insertion–extraction is found through using various state‐of‐the‐art characterization techniques. Li⁺ sequentially inserts into the 4c(1) and 8d sites of γ‐LCSVO, but its maximum unit‐cell volume variation is only ≈0.18%, the smallest among the explored “zero‐strain” compounds. Its mean strain originating from Li⁺ insertion is only 0.07%. Consequently, both γ‐LCSVO nanowires (γ‐LCSVO‐NW) and micrometer‐sized particles (γ‐LCSVO‐MP) exhibit excellent cycling stability with 90.1% and 95.5% capacity retention after as long as 2000 cycles at 10C, respectively. Moreover, γ‐LCSVO‐NW and γ‐LCSVO‐MP respectively deliver large reversible capacities of 445.7 and 305.8 mAh g^?1 at 0.1C, and retain 251.2 and 78.4 mAh g^?1 at 10C. Additionally, γ‐LCSVO shows a suitably safe operating potential of ≈1.0 V, significantly lower than that of the famous “zero‐strain” Li₄Ti₅O₁₂ (≈1.6 V). These merits demonstrate that γ‐LCSVO can be a practical anode compound for stable, high‐energy, fast‐charging, and safe Li⁺ storage.     

Dietary Restraint and Control Over “Wanting” Following Consumption of “Forbidden” Food

Eating behavior can be influenced by the rewarding value of food, i.e., “liking” and “wanting.” The objective of this study was to assess in normal‐weight dietary restrained (NR) vs. unrestrained (NU) eaters how rewarding value of food is affected by satiety, and by eating a nonhealthy perceived, dessert‐specific food vs. a healthy perceived, neutral food (chocolate mousse vs. cottage cheese). Subjects (24NR age = 25.0 ± 8.2 years, BMI = 22.3 ± 2.1 kg/m²; 26NU age = 24.8 ± 8.0 years, BMI = 22.1 ± 1.7 kg/m²) came to the university twice, fasted (randomized crossover design). Per test‐session “liking” and “wanting” for 72 items divided in six categories (bread, filling, drinks, dessert, sweets, stationery (placebo)) was measured, before and after consumption of chocolate mousse/cottage cheese, matched for energy content (5.6 kJ/g) and individual daily energy requirements (10%). Chocolate mousse was liked more than cottage cheese (P < 0.05). After consumption of chocolate mousse or cottage cheese, appetite and “liking” vs. placebo were decreased in NR and NU (P < 0.03), whereas “wanting” was only decreased in NR vs. NU (P ≤ 0.01). In NR vs. NU “wanting” was specifically decreased after chocolate mousse vs. cottage cheese; this decrease concerned especially “wanting” for bread and filling (P < 0.05). To conclude, despite similar decreases in appetite and “liking” after a meal in NR and NU, NR decrease “wanting” in contrast to NU. NR decrease “wanting” specifically for a nonhealthy perceived, “delicious,” dessert‐specific food vs. a nutritional identical, yet healthy perceived, slightly less “delicious,” “neutral” food. A healthy perceived food may thus impose greater risk for control of energy intake in NR.     

Extended “Adsorption–Insertion” Model: A New Insight into the Sodium Storage Mechanism of Hard Carbons

Hard carbons (HCs) are promising anodes of sodium‐ion batteries (SIBs) due to their high capacity, abundance, and low cost. However, the sodium storage mechanism of HCs remains unclear with no consensus in the literature. Here, based on the correlation between the microstructure and Na storage behavior of HCs synthesized over a wide pyrolysis temperature range of 600–2500 °C, an extended “adsorption–insertion” sodium storage mechanism is proposed. The microstructure of HCs can be divided into three types with different sodium storage mechanisms. The highly disordered carbon, with d₀₀₂ (above 0.40 nm) large enough for sodium ions to freely transfer in, has a “pseudo‐adsorption” sodium storage mechanism, contributing to sloping capacity above 0.1 V, together with other conventional “defects” (pores, edges, heteroatoms, etc.). The pseudo‐graphitic carbon (d‐spacing in 0.36–0.40 nm) contributes to the low‐potential (<0.1 V) plateau capacity through “interlayer insertion” mechanism, with a theoretical capacity of 279 mAh g^?1 for NaC₈ formation. The graphite‐like carbon with d₀₀₂ below 0.36 nm is inaccessible for sodium ion insertion. The extended “adsorption–insertion” model can accurately explain the dependence of the sodium storage behavior of HCs with different microstructures on the pyrolysis temperature and provides new insight into the design of HC anodes for SIBs.     

Upgrading of Existing Municipal Wastewater Treatment Plants with the “Non‐Conventional Low MLSS MBR Technology”

In the future, upgrading of existing wastewater treatment plants (wwtps) will be more important than the erection of entirely new plants, as most of the plants necessary in Germany already exist. Thus far, membrane bioreactor (MBR) technology is not used as an alternative for plant upgrading in Germany. However, at several locations the preconditions indicate that the application of the MBR technology for upgrading of plants may be favorable. These preconditions include the need for a substantial enlargement of the aeration tank volume and/or the need to improve the efficiency of the final sedimentation tanks, and also require that the existing tanks be in a good state, so that the tanks can be used in the future. The relevant preconditions and the basic upgrading concept using the MBR technology were presented earlier. Depending on the local preconditions regarding the existing tank volume, a specific aspect of this application can be an operation mode using “non‐conventional low MLSS (mixed liquor suspended solids) concentrations” (5 kg MLSS/m³ through 7 kg MLSS/m³) due to the amount of the existing tank volume. Two research projects were carried out covering the operation of five pilot plants on a cubic meter scale to demonstrate the feasibility of this kind of MBR process. This paper presents the core results of this research work.     

Rational Design of Hierarchical “Ceramic‐in‐Polymer” and “Polymer‐in‐Ceramic” Electrolytes for Dendrite‐Free Solid‐State Batteries

Solid polymer electrolytes as one of the promising solid‐state electrolytes have received extensive attention due to their excellent flexibility. However, the issues of lithium (Li) dendrite growth still hinder their practical applications in solid‐state batteries (SSBs). Herein, composite electrolytes from “ceramic‐in‐polymer” (CIP) to “polymer‐in‐ceramic” (PIC) with different sizes of garnet particles are investigated for their effectiveness in dendrite suppression. While the CIP electrolyte with 20 vol% 200 nm Li_6.4La₃Zr_1.4Ta_0.6O₁₂ (LLZTO) particles (CIP‐200 nm) exhibits the highest ionic conductivity of 1.6 × 10^?4 S cm^?1 at 30 °C and excellent flexibility, the PIC electrolyte with 80 vol% 5 µm LLZTO (PIC‐5 µm) shows the highest tensile strength of 12.7 MPa. A sandwich‐type composite electrolyte (SCE) with hierarchical garnet particles (a PIC‐5 µm interlayer sandwiched between two CIP‐200 nm thin layers) is constructed to simultaneously achieve dendrite suppression and excellent interfacial contact with Li metal. The SCE enables highly stable Li plating/stripping cycling for over 400 h at 0.2 mA cm^?2 at 30 °C. The LiFePO₄/SCE/Li cells also demonstrate excellent cycle performance at room temperature. Fabricating sandwich‐type composite electrolytes with hierarchical filler designs can be an effective strategy to achieve dendrite‐free SSBs with high performance and high safety at room temperature.     

A new sensor-the "filtration Probe"- for quantitative characterization of penicillin fermentation. III. An automatically operating probe

The filtration characteristics of the penicillin broth can be monitored semicontinuously using an automatic filtration probe. This probe operates aseptically and the broth samples (filtrate and filter cake) are recycled to the fermentor after each filtration. The collected data-filtrate volume and filter cake volume versus filtration time-can be related to the total biomass concentration in the fermentor.     

Hierarchically Porous,Ultrathick, “Breathable” Wood‐Derived Cathode for Lithium‐Oxygen Batteries

In this work, a hierarchically porous and ultrathick “breathable” wood‐based cathode for high‐performance Li‐O₂ batteries is developed. The 3D carbon matrix obtained from the carbonized and activated wood (denoted as CA‐wood) serves as a superconductive current collector and an ideal porous host for accommodating catalysts. The ruthenium (Ru) nanoparticles are uniformly anchored on the porous wall of the aligned microchannels (denoted as CA‐wood/Ru). The aligned open microchannels inside the carbon matrix contribute to unimpeded oxygen gas diffusion. Moreover, the hierarchical pores on the microchannel walls can be facilely impregnated by electrolyte, forming a continuous supply of electrolyte. As a result, numerous ideal triphase active sites are formed where electrolyte, oxygen, and catalyst accumulate on the porous walls of microchannels. Benefiting from the numerous well‐balanced triple‐phase active sites, the assembled Li‐O₂ battery with the CA‐wood/Ru cathode (thickness: ≈700 µm) shows a high specific area capacity of 8.58 mA h cm^?2 at 0.1 mA cm^?2. Moreover, the areal capacity can be further increased to 56.0 mA h cm^?2 by using an ultrathick CA‐wood/Ru cathode with a thickness of ≈3.4 mm. The facile ultrathick wood‐based cathodes can be applied to other cathodes to achieve a super high areal capacity without sacrificing the electrochemical performance.     

Modeling the influence of slurry concentration on Saccharomyces cerevisiae cake porosity and resistance during microfiltration

Filtration of an isotonic suspension of baker's yeast through a 0.45‐μm membrane was studied at two different pressures, 40 and 80 kPa, for yeast concentrations ranging from 0.14 to 51 kg/m³ (dry weight). For a yeast volume fraction above 0.06 (～21.8 kg/m³), the porosity of the yeast cake is less dependent on the suspension concentration. For highly diluted suspensions, the specific cake resistance approaches a minimum that depends on the filtration pressure. Correlation functions of cake porosity and specific cake resistance were obtained for the concentration range investigated showing that the Kozeny–Carman coefficient increases when the applied pressure increases. Both filtration pressure and slurry concentration can be process controlled. In the range of moderate yeast concentration, the filtrate flux may be increased by manipulating the filtration pressure and the slurry concentration, thereby improving the overall process efficiency. The complex behavior of yeast cakes at high slurry concentration can be described by a conventional model as long as part of yeast cells are assumed to form aggregates, which behave as single bigger particles. The aggregation effect may be accounted for using a binary mixture model. © 2012 American Institute of Chemical Engineers Biotechnol. Prog., 2012     

“Capacity”, “best interests”, “will and preferences” and the UN Convention on the Rights of Persons with Disabilities

The United Nations (UN) Convention on the Rights of Persons with Disabilities (CRPD) is the most up‐to‐date international legal instrument concerning the rights of persons with disabilities. Such persons are taken to include those with serious mental disorders. According to an authoritative interpretation of a crucial Article (Article 12 ‐ Equal recognition before the law) by the UN CRPD Committee, involuntary detention and treatment of people with mental health disabilities are prohibited under the Convention. Both conventional mental health law and “capacity‐based” law are deemed to violate the Convention. However, some other UN bodies are not in full agreement (for example, the UN Human Rights Committee and the Subcommittee on Prevention of Torture and Other Cruel, Inhuman or Degrading Treatment or Punishment), while others are less explicitly absolutist (for example, the Human Rights Council). Furthermore, strong criticisms of the position of the CRPD Committee have been mounted from a number of academic quarters. These criticisms center on whether the role of a person's ability to make a decision can be ignored, no matter the circumstances. Much of the above debate turns on the concept of “legal capacity” and the now often‐repeated precept that one must always respect the “will and preferences” of the person with a disability. However, “will and preferences” remains undefined. In this paper, I offer an analysis of “will and preferences” that can clarify interventions that may be acceptable or non‐acceptable under the terms of the UN Convention.     

Multistate Luminescent Solar Concentrator “Smart” Windows

A supertwist liquid crystalline luminescent solar concentrator (LSC) “smart” window is fabricated which can be switched electrically between three states: one designed for increased light absorption and electrical generation (the “dark” state), one for transparency (the “light” state), and one for enhanced haziness (“scattering” state). In the scattering state, the absorption and edge emissions decrease while the face emissions are enhanced. This new LSC “smart” window state can find application as a privacy feature in housing, but could also allow for a new “smart” window application as a diffuse glazing to increase plant growth in horticultural applications.     

A Supramolecular “Double‐Cable” Structure with a 12944 Helix in a Columnar Porphyrin‐C60 Dyad and its Application in Polymer Solar Cells

A novel porphyrin‐C₆₀ dyad (PCD1) is designed and synthesized to investigate and manipulate the supramolecular structure where geometrically isotropic [such as [60]fullerene (C₆₀)] and anisotropic [such as porphyrin (Por)] units coexist. It is observed that PCD1 possesses an enantiomeric phase behavior. The melting temperature of the stable PCD1 thermotropic phase is 160 °C with a latent heat (ΔH) of 18.5 kJ mol^?1. The phase formation is majorly driven by the cooperative intermolecular Por–Por and C₆₀–C₆₀ interactions. Structural analysis reveals that this stable phase possesses a supramolecular “double‐cable” structure with one p‐type Por core columnar channel and three helical n‐type C₆₀ peripheral channels. These “double‐cable” columns further pack into a hexagonal lattice with a = b = 4.65 nm, c = 41.3 nm, α = β = 90°, and γ = 120°. The column repeat unit is determined to possess a 129₄₄ helix. With both donor (D; Pro) and acceptor (A; C₆₀) units having their own connecting channels as well as the large D/A interface within the supramolecular “double‐cable” structure, PCD1 has photogenerated carriers with longer lifetimes compared to the conventional electron acceptor [6,6]‐phenyl‐C₆₁‐butyric acid methyl ester. A phase‐separated columnar morphology is observed in a bulk‐heterojunction (BHJ) material made by the physical blend of a low band‐gap conjugated polymer, [poly[2,6‐(4,4‐bis‐(2‐ethylhexyl)‐4H‐cyclopenta [2,1‐b;3,4‐b′]‐dithiophene)‐alt‐4,7‐(2,1,3‐benzothia‐diazole)] (PCPDTBT), and PCD1. With a specific phase structure in the solid state and in the blend, PCD1 is shown to be a promising candidate as a new electron acceptor in high performance BHJ polymer solar cells.     

The possible role of “sibling neurite bias” in the coordination of neurite extension,branching, and survival

In this review we consider a novel mechanism, “sibling neurite bias,” which may explain aspects of the coordination of elongation, branching, and resorption among different neurites growing from the same neuronal cell body. In this model, growing neurites which incorporate structural precursors at higher rates would deplete the cellular pool of precursors available to their “sibling” neurites; neurites would compete for survival, but in addition they would bias each other's behavior during active growth. Evidence is reviewed that “sibling neurite bias” may contribute to the establishment and stabilization of specific neural connections. Specific examples examined include the loss of polyinnervation at the developing neuromuscular junction, contextual mapping in the retino-tectal system, and selective neurite growth patterns and synaptic connections in nerve tissue culture model systems.     

Aggregates and other particles as the origin of the “extraordinary” diffusional phase in polyelectrolyte solutions

The “extraordinary” diffusional phase (EP) at low ionic strength, and the conditions for 1 its removability by filtration were investigated for dilute solutions of the following linear polyelectrolytes: poly(L -lysine), heparin, chondroitin-6-sulfate, hyaluronate, polystyrene sulfonate, and variably ionized polyacrylamide. The EP was not present for all the different types studied, and for heparin, for example, the phase was present only for samples from certain sources. In all cases the phase was removable by filtration through sufficiently small pore-size membranes. Once filtered, the EP remained absent for over one week. It is concluded that the extraordinary diffusional phase consists of fairly stable polyelectrolyte aggregates, and sometimes also includes other very small particulate impurities. These aggregates and other small particles are thought to be present, or at least nascent, in the dry polyelectrolyte material, so that their properties may depend critically on the manner in which such dry material is produced. Tests for “reversibility” of the EP by cycling between high and low C_s by dialysis further confirm these conclusions. The evidence is thus against the EP representing any type of temporal aggregates or local ordering, at least for the linear polyelectrolytes studied in this work Rather, due to the extremely feeble scattering of ordinary polyelectrolytes at low ionic strength, the weak scattering from residual aggregates and other particles, not removed by ordinary filtration and centrifugation procedures, give autocorrelable scattering signals with long decay times. The “loss” of the extraordinary phase as ionic strength increases appears to be due simply to the weak EP scattering signal getting buried in the sharply increasing scattering from the ordinary polyelectrolyte phase. Model calculations based on experimental data support this latter conclusion. © 1992 John Wiley & Sons, Inc.     

Growth and development of <Emphasis Type="Italic">Frankia</Emphasis> spp. strain CcI3 at the single-hypha level in liquid culture

Filamentous actinobacteria from the genus Frankia grow by hyphal tip extension and branching. The growth kinetics and branching pattern of Frankia are not well studied, especially at the early stages of mycelial development. Here, we compare the growth of Frankia sp. strain CcI3 in liquid cultures with and without proteose peptone #3 (PP3) using time-lapse photomicrography and image analysis. Individual hyphae showed a pseudolinear increase in length at early stages of development, whereas at the mycelial level, the aggregate length of hyphae described an exponential rate before slowing. Growth based on optical density or microscopic observations was similar in medium with or without PP3. However, PP3 altered the pattern of mycelial development by increasing branching. Distances between the hyphal apex and first branches were on average shorter in PP3-containing media. The final interbranch distances were also shorter in PP3 medium indicating that hyphae tended to branch earlier and more often when supplemented with PP3 to give a more compact mycelium. Vesicle development in nitrogen-fixing cultures limited cell expansion as a result of vesicles truncating growth on new branches. The results provide some explanation for the growth kinetics of Frankia and some indication of how growth rates may be improved.     

Multi‐cycle recovery of lactoferrin and lactoperoxidase from crude whey using fimbriated high‐capacity magnetic cation exchangers and a novel “rotor–stator” high‐gradient magnetic separator

Cerium (IV) initiated “graft‐from” polymerization reactions were employed to convert M‐PVA magnetic particles into polyacrylic acid‐fimbriated magnetic cation exchange supports displaying ultra‐high binding capacity for basic target proteins. The modifications, which were performed at 25 mg and 2.5 g scales, delivered maximum binding capacities (Q_max) for hen egg white lysozyme in excess of 320 mg g^?1, combined with sub‐micromolar dissociation constants (0.45–0.69 µm) and “tightness of binding” values greater than 49 L g^?1. Two batches of polyacrylic acid‐fimbriated magnetic cation exchangers were combined to form a 5 g pooled batch exhibiting Q_max values for lysozyme, lactoferrin, and lactoperoxidase of 404, 585, and 685 mg g^?1, respectively. These magnetic cation exchangers were subsequently employed together with a newly designed “rotor–stator” type HGMF rig, in five sequential cycles of recovery of lactoferrin and lactoperoxidase from 2 L batches of a crude sweet bovine whey feedstock. Lactoferrin purification performance was observed to remain relatively constant from one HGMF cycle to the next over the five operating cycles, with yields between 40% and 49% combined with purification and concentration factors of 37‐ to 46‐fold and 1.3‐ to 1.6‐fold, respectively. The far superior multi‐cycle HGMF performance seen here compared to that observed in our earlier studies can be directly attributed to the combined use of improved high capacity adsorbents and superior particle resuspension afforded by the new “rotor–stator” HGMS design. Biotechnol. Bioeng. 2013; 110: 1714–1725. © 2013 Wiley Periodicals, Inc.     

A critique of the “ultra‐high risk” and “transition” paradigm

The transdiagnostic expression of psychotic experiences in common mental disorder (anxiety/depression/substance use disorder) is associated with a poorer prognosis, and a small minority of people may indeed develop a clinical picture that meets criteria for schizophrenia. However, it appears neither useful nor valid to observe early states of multidimensional psychopathology in young people through the “schizo”‐prism, and apply misleadingly simple, unnecessary and inefficient binary concepts of “risk” and “transition”. A review of the “ultra‐high risk” (UHR) or “clinical high risk” (CHR) literature indicates that UHR/CHR samples are highly heterogeneous and represent individuals diagnosed with common mental disorder (anxiety/depression/substance use disorder) and a degree of psychotic experiences. Epidemiological research has shown that psychotic experiences are a (possibly non‐causal) marker of the severity of multidimensional psychopathology, driving poor outcome, yet notions of “risk” and “transition” in UHR/CHR research are restrictively defined on the basis of positive psychotic phenomena alone, ignoring how baseline differences in multidimensional psychopathology may differentially impact course and outcome. The concepts of “risk” and “transition” in UHR/CHR research are measured on the same dimensional scale, yet are used to produce artificial diagnostic shifts. In fact, “transition” in UHR/CHR research occurs mainly as a function of variable sample enrichment strategies rather than the UHR/CHR “criteria” themselves. Furthermore, transition rates in UHR/CHR research are inflated as they do not exclude false positives associated with the natural fluctuation of dimensional expression of psychosis. Biological associations with “transition” thus likely represent false positive findings, as was the initial claim of strong effects of omega‐3 polyunsatured fatty acids in UHR samples. A large body of UHR/CHR intervention research has focused on the questionable outcome of “transition”, which shows lack of correlation with functional outcome. It may be more productive to consider the full range of person‐specific psychopathology in all young individuals who seek help for mental health problems, instead of “policing” youngsters for the transdiagnostic dimension of psychosis. Instead of the relatively inefficient medical high‐risk approach, a public health perspective, focusing on improved access to a low‐stigma, high‐hope, small scale and youth‐specific environment with acceptable language and interventions may represent a more useful and efficient strategy.     

Distribution of the Character States “Early Sympetaly” and “Late Sympetaly” Within the “Sympetalae Tetracyclicae” and Presumably Allied Groups*

Within the Asteridae (“Sympetalae Tetracyclicae”) two main developmental patterns can be distinguished as regards the formation of corolla tubes, namely “early” and “late sympetaly”. Since the character “ontogeny of sympetaly”, after intensive studies, proved to be valuable for systematic considerations, we now recognize two blocks of orders within the Asteridae (and related groups): the Asteridae A-block and the Asteridae B-block (Figs. 82 and 83). By and large this bipartition referring mainly to the corolla tube development corresponds well with major lineages indentified by recent molecular data (see, e.g., Chase et al., 1993). Asteridae A-block is characterized predominantely by “late sympetaly” the “early sympetaly” in Rubiales and Oleales can be interpreted as derived within this block or can be linked with that in Asteridae B-block. Asteridae B-block is uniform throughout in its “early sympetaly”. In this block it is a primitive character, as judged from its occasional occurrence in the choripetalous Cornales and Apiales (Apiaceae, Araliaceae, Pittosporaceae), which can be regarded as ancestral for block B.     

Heterogeneous Single Atom Electrocatalysis,Where “Singles” Are “Married”

There is an intensive search for heterogeneous single atom catalysts (SACs) of high activity, efficiency, durability, and selectivity for a wide variety of electrocatalytic conversion and chemical reactions, such as the hydrogen evolution reaction (HER), oxygen evolution/reduction reaction (OER and ORR), CO₂ reduction reaction (CO₂ RR), and nitrogen reduction reaction (NRR). With the downsizing from nanoparticles and clusters to single atoms, there are steady changes in the bond and coordination environment for each and every atom involved. Indeed, the single atoms in these electrocatalysts are not “singles”; they are “married” to the supporting surfaces, and their performance is controlled by the bonding and coordination with the substrate surfaces. Herein, an overview is presented on the brief history leading to the rapid development of SACs and their current status, by focusing on their synthesis, control of composition, strategies to realize single atoms with the desired bonds and coordination, and targeted performance in selected reactions. Their applications in the selected spectrum of energy conversion and chemical reactions are discussed, in relation to their structures at varying length scales down to the atomic level. A particular emphasis is placed on on‐going research activities, together with the future perspectives and particular challenges for SACs.     

“Reverse” sexual dichromatism in a Neotropical frog

Sexual dichromatism is widespread among animals, but examples of “reverse” sexual dichromatism, in which females are more brightly colored than males, are extremely rare. We discovered a unique case of reverse sexual dichromatism in the golden rocket frog (Anomaloglossus beebei), a diurnal Neotropical frog. Females are bright “golden” in color, and males are drab tan with brown pigmentation that darkens when they are calling. Here, we document this color variation with calibrated digital photography and further show that there is no evidence for sex‐specific habitat matching; both sexes live in the same well‐lit habitat on green bromeliad leaves. Our results suggest that color variation in this species is an intraspecific signal and provide an important exception to the general expectation that males are more visually conspicuous in species with conventional sex roles.