Solid-phase synthesis of peptidosulfonamide containing peptides derived from Leu-enkephalin

Using Boc or Fmoc-protected β-substituted aminoethanesulfonyl chlorides (2-substituted taurylchlorides) the solid-phase synthesis of dipeptidosulfonamides as well as peptidosulfonamide containing peptides derived from Leu-enkephalin is described. The binding activity of the peptidosulfonamide YGGFL derivatives is reported.     

Solid-phase synthesis of triple-helical collagen-model peptides

Summary The triple-helical conformation of collagen has been proposed to be important for mediation of cellular activities, such as adhesion and activation, extracellular matrix assembly, and enzyme function. We have developed synthetic protocols that allow for the study of biological activities of specific collagen sequences in triple-helical conformation. These methods primarily involve solid-phase assembly and covalent linkage of three peptide chains. The resultant triple-helical peptides have sufficient thermal stabilities to permit structural and biological characterization under physiological conditions. The present article critically reviews the various approaches for constructing synthetic triple-helices.This paper is based on a presentation given at the Symposium on Peptide Structure and Design as part of the 31st Annual ACS Western Regional Meeting held in San Diego, CA, USA, October 18–21, 1995.     

Solid-phase synthesis of C-terminal modified peptides

Solid-phase synthesis of biomolecules, of which peptides are the principal example, is well established. However, synthetic peptides containing modifications at the carboxy termini are often desired because of their potential therapeutic properties. As a result, there is a necessity for effective solid-phase strategies for the preparation of peptides with C-terminal end groups other than the usual carboxylic acid and carboxamide functionalities. The present article primarily reviews literature reports on methods for solid-phase synthesis of C-terminal modified peptides. In addition, general information about biological activities and/or synthetic applications of each individual class of peptide is also provided.     

Solid-phase synthesis of glucose-derived Amadori peptides.

Nonenzymatic glycosylation or glycation of amino groups in peptides and proteins by D-glucose is a universal reaction with important implications for the pathogenesis of many diseases including diabetes mellitus. Here a general approach is reported to synthesize site specifically glucose-derived N-glycated peptides. Therefore, model peptides H-AKASASFL-NH(2), H-AKASADFL-NH(2), H-ASKASKFL-NH(2), and H-AKDSASFL-NH(2) were synthesized on solid phase by Fmoc chemistry using Fmoc-Lys(4-methyltrityl)-OH in positions 2 or 3 to be glycated. After completion of the synthesis, the acid labile 4-methyltrityl-group was cleaved with 1% TFA in DCM and the free amino groups were glycated by the Lobry de Bruyn reaction using 2,3:4,5-di-O-isopropylidene-aldehydo-beta-D-arabino-hexos-2-ulo-2,6-pyranose on solid phase. After TFA treatment, the crude peptides were obtained in high yields and purities above 80%. Minor by-products were well separated on reversed-phase HPLC.     

Solid-phase synthesis of acridine-based threading intercalator peptides

The preparation of a novel acridine-based amino acid is reported. This N-Alloc-protected monomer can be coupled and deprotected under solid-phase peptide synthesis procedures to create acridine peptide conjugates as potential threading intercalators. A peptide containing this novel amino acid undergoes spectral changes in the presence of duplex DNA and RNA consistent with intercalative binding.     

Solid-phase synthesis of C-terminally modified peptides.

In this paper, a straightforward and generic protocol is presented to label the C-terminus of a peptide with any desired moiety that is functionalized with a primary amine. Amine-functional molecules included are polymers (useful for hybrid polymers), long alkyl chains (used in peptide amphiphiles and stabilization of peptides), propargyl amine and azido propyl-amine (desirable for 'click' chemistry), dansyl amine (fluorescent labeling of peptides) and crown ethers (peptide switches/hybrids). In the first part of the procedure, the primary amine is attached to an aldehyde-functional resin via reductive amination. To the secondary amine that is produced, an amino acid sequence is coupled via a standard solid-phase peptide synthesis protocol. Since one procedure can be applied for any given amine-functional moiety, a robust method for C-terminal peptide labeling is obtained.     

Solid-phase synthesis and characterization of N-methyl-rich peptides.

A library of peptides required for a project investigating the factors relevant for blood-brain barrier transport was synthesized on solid phase. As a result of the high N-methylamino acid content in the peptides, their syntheses were challenging and form the basis of the work presented here. The coupling of protected N-methylamino acids with N-methylamino acids generally occurs in low yield. (7-azabenzotriazol-1-yloxy)-tris(pyrrolidino)phosphonium hexafluorophosphate (PyAOP) or PyBOP/1-hydroxy-7-azabenzotriazole (HOAt), are the most promising coupling reagents for these couplings. When a peptide contains an acetylated N-methylamino acid at the N-terminal position, loss of Ac-N-methylamino acid occurs during trifluoroacetic acid (TFA) cleavage of the peptide from the resin. Other side reactions resulting from acidic cleavage are described here, including fragmentation between consecutive N-methylamino acids and formation of diketopiperazines (DKPs). The time of cleavage is shown to greatly influence synthetic results. Finally, high-performance liquid chromatography (HPLC) profiles of N-methyl-rich peptides show multiple peaks because of slow conversion between conformers.     

Solid-phase synthesis of a range of O-phosphorylated peptides by post-assembly phosphitylation and oxidation.

A completely general method for the O-phosphorylation of peptides of any given composition using solid-phase methodology is described. Peptides were assembled using Fmoc amino acid active esters, with base used for Fmoc deprotection. Unprotected amino acid side chain hydroxyl groups were phosphitylated and oxidised at the end of the assembly using bis(benzyloxy)(diisopropylamino)phosphine and tert.-butylhydroperoxide respectively. TFA was used for final deprotection of the amino acid side chains and for simultaneous cleavage from the resin. The synthesis of O-phosphopeptides of up to 15 residues in length is described.     

Solid-phase synthesis of DNA binding polyamides on oxime resin

Control of the energetics and specificity of DNA binding polyamides is necessary for inhibition of protein-DNA complex formation and gene regulation studies. Typically, solid-phase methods using Boc monomers for synthesis have depended on Boc-beta-Ala-PAM resin which affords a beta-alanine-Dp tail at the C-terminus, after cleavage with N,N-dimethylaminopropylamine (Dp). To address the energetic consequences of this tail for DNA minor groove binding, we describe an alternative solid phase method employing the Kaiser oxime resin which allows the synthesis of polyamides with incrementally shortened C-terminal tails. Polyamides without Dp and having methyl amide tails rather than beta-alanine show similar affinity relative to the standard beta-Dp tail. The truncated tail diminishes the A,T base pair energetic preference of the beta-Dp tail which will allow a greater variety of DNA sequences to be targeted by hairpin polyamides.     

Solid-phase synthesis of chemotactic peptides using alpha-azido acids.

Four chemotactic peptides, For-Met-Xxx-Phe-OMe, with an alpha,alpha-disubstituted amino acid at position 2 have been synthesized by the azido acid method [Meldal M, Juliano MA, Jansson AM. 1997. Azido acids in a novel method of solid-phase peptide synthesis. Tetrahedron Lett. 38: 2531-2534] on solid-phase, and were tested for biological activity. Dipropylglycine in the central position (Xxx) was found to be as active as the natural chemotactic peptide for chemotactic activity toward human neutrophils. Higher yields were obtained than previously reported solution-phase syntheses of chemotactic peptides, and EEDQ was used successfully for the difficult solid-phase formylation of amino groups.     

Solid-phase synthesis and applications of N-(S-acetylmercaptoacetyl) peptides

The reagent pentafluorophenyl S-acetylmercaptoacetate was used to modify the N-terminus of resin-bound side-chain-protected peptides. The modification was carried out in an automated cycle in the final stage of fluorenylmethoxycarbonyl (Fmoc)/polyamide-mediated solid-phase synthesis. Side-chain deprotection and cleavage from the resin with aqueous trifluoroacetic acid gave the N-(S-acetylmercaptoacetyl) peptides. The S-acetylmercaptoacetyl peptides were transformed into reactive thiol-containing peptides by incubation with hydroxylamine at neutral pH. The S-deacetylation was performed in the presence of a sulfhydryl-reactive compound (or intramolecular group) to enable immediate capture of the sensitive thiol. Three applications were investigated. An S-acetylmercaptoacetyl peptide, containing a sequence of a meningococcal membrane protein, was incubated with hydroxylamine in the presence of 5-(iodoacetamido)fluorescein to give the corresponding fluorescein-labeled peptide in 62% yield. The same peptide was also S-deacetylated in the presence of bromoacetylated poly-L-lysine to afford a peptide/polylysine conjugate. Finally, a peptide corresponding to a sequence of herpes simplex virus glycoprotein D was prepared. This peptide, containing an N-terminal-S-acetylmercaptoacetyl group and an additional C-terminal S-(3-nitro-2-pyridinesulfenyl)cysteine residue, was converted into a cyclic disulfide peptide (20%).     

Solid-phase synthesis of peptides containing arginine with an unprotected guanidine group

A new variant of the solid phase synthesis of arginine-containing peptides was proposed. The conditions for the attachment to the Wang polymer of N alpha-Fmoc-arginine containing a protonated guanidine group were found. We demonstrated that this attachment is accompanied by neither racemization nor the attachment of the second Arg residue. Side reactions involving the guanidine group of arginine were studied, and methods for their prevention were proposed. The comparison of the carbodiimide method with a 1-hydroxybenzotriazole additive and a modified method with the use of Kastro's reagent for the introduction of N alpha-Fmoc-Arg residue with the unprotected guanidine group into the growing peptide chain demonstrated the advantages of the second method. Bradykinin and a peptide corresponding to the 584-591 sequence of the transmembrane gp41 from HIV-1 were synthesized by the method proposed here.     

Solid-phase synthesis of 2-[18F]fluoropropionyl peptides

The 2-[(18)F]fluoropropionic (2-[(18)F]FPA) acid is used as a prosthetic group for radiolabeling proteins and peptides for targeted imaging using positron emission tomography (PET). Radiolabeling of compounds with more than one acylable functional group can lead to complex mixtures of products; however, peptides can be labeled regioselectively on the solid phase. We investigated the use of a solid-phase approach for the preparation of 2-[(18)F]fluoropropionyl peptides. [(18)F]FPA was prepared and conjugated to the peptides attached to the solid phase support. The (18)F-labeled peptides were obtained in 175 min with decay corrected yields of 10% (related to [(18)F]fluoride) and with a purity of 76-99% prior HPLC purification. The suitability of various coupling reagents and solid supports were tested for radiolabeling of several peptides of various lengths.     

Solid-phase synthesis of a nonadecapeptide coded for by the v-myb oncogene

A nonadecapeptide comprising a predicted B-cell determinant from the v-myb oncoprotein was synthesized by Merrifield's solid-phase method. Hydrogen chloride in dichloromethane was used for protective t-butyloxycarbonyl group removal; the deprotection was monitored using a new qualitative deprotection test. The nonadecapeptide coupled to a carrier elicited a high titre of protein-reactive antipeptide antibodies.     

Solid-phase synthesis of cyclic RGD-furanoid sugar amino acid peptides as integrin inhibitors

The solid-phase synthesis of cyclic RGD peptides containing either one or two furanoid sugar amino acids (SAAs) is reported. Using a cyclization-cleavage approach five peptides were successfully assembled and consecutively tested on their ability to bind to the integrin receptors alpha(v)beta(3) and alpha(IIb)beta(3). The cyclic tetrapeptide c[RGD-SAA] (1) showed the most promising activity in an inhibition assay with an IC(50) of 1.49 microM for the alpha(v)beta(3) receptor and 384 nM for the alpha(IIb)beta(3) receptor.     

Solid-phase C-terminal sequencing of peptides

Summary C-terminal amino acid sequence analysis seemed to be established procedure, as the counterpart of Edman's N-terminal sequencing method. However, poor recovery of the C-terminal amino acids in the reaction in homogeneous solution suggested further improvement of the method. In the present study, N-terminal amino acid was fixed covalently to the controlled pore glass (CPG) beads and the C-terminal amino acid was activated (by treating with acetic anhydride), coupled with thiocyanate to form thiohydantoin (TH) ring at the C-terminus. Then, the C-terminal amino acid was split off as the corresponding TH derivative, and analyzed by HPLC. Hydrolysis of the TH derivative was achieved at 60°C in the presence of 2 M HC1 for 2 h. Solid phase fixed peptide was washed simply with acetone, and dried for the next cycle of the reaction. So far obtained results in the heterogeneous mixture are not satisfactory in terms of the recovery of the C-terminal TH, and improvement of the recovery and further steps are under progress.     

Solid-phase precipitation and extraction, a new separation process applied to the isolation of synthetic peptides.

A new method for separation and purification is described. The process, referred to as solid-phase precipitation and extraction (SPPE), was developed and applied to postcleavage isolation of synthetic peptides. The technique uses normal approaches of chromatography and solid-phase extraction sorbents with a precipitation or drying procedure so that the sorbent becomes a support matrix for thin-film deposition of the compounds of interest. This procedure causes precipitated compounds of interest to be trapped on the large surface area or in the pores of the matrix so that by-products and impurities can be removed by strong wash solvents. In application to solid-phase peptide synthesis chemistry, by-products from the cleavage and deprotection are selectively extracted from the crude sample mixture under mild conditions. In comparison to the ether precipitation method used in peptide chemistry, the SPPE process provides isolated products that are 14-17% (w/w) higher purity.     

Continuous flow synthesis of peptides using a polyacrylamide gel resin (Expansin).

The continuous flow syntheses of endothelin 1, proendothelin 2, ATP binding site of the CDC2 kinase 3, and fragment 18-30 of an actin 4, have been performed by using a polyacrylamide gel resin Expansin (about 0.6 mmol NH2/g) with the glycolamidic ester handle as labile anchorage. In addition, we report here a method of air oxidation which reduces the formation of side-products related to the formation of intermolecular disulfide bridges.