Continuous ethanol production by immobilized yeast reactor

Summary Saccharomyces cerevisiae yeast immobilized in calcium alginate gel beads was employed in packed-bed column reactors for continuous ethanol production from glucose or cane molasses, and for beer fermentation from barley malt wort. With properly balanced nutrient content or periodical regeneration of cells by nutrient addition and aeration, ethanol production could be maintained for several months. About 7 percent (w/v) ethanol content could be easily maintained with cane molasses diluted to about 17.5 percent (w/v) of total reducing sugars at about 4 to 5 h residence time. Beer of up to 4.5 percent (wv) of ethanol could be produced from barley wort at about 2 h residence time without any addition of nutrients.     

Continuous production of ethanol using immobilized growing yeast cells

Summary Immobilized growing yeast cells were prepared in kappa-carra-geenan gel. Gel beads containing a small number of cells were incubated in a complete medium. The cells grew very well in the gel and the number of living cells per ml of gel increased to over 10 times that of free cells per ml of culture medium. After growing in the gel, the cells formed a dense layer of cells near the gel surface and produced large amounts of ethanol. The conditions for continuous production of ethanol using immobilized growing yeast cells were investigated. The supply of appropriate nutrients for growth was essential for the continuous production. The living cells in the gel were maintained at the high level of 10⁹ per ml of gel and continuous production of ethanol using the complete medium containing 10% glucose was carried out with a retention time of 1 h. In this operation, a stable steady state was maintained for longer than 3 months. The ethanol concentration was 50 mg/ml and the conversion of glucose utilized to ethanol produced was almost 100% of the theoretical yield.     

Kinetics of repeated batch production of ethanol by immobilized growing yeast cells

Summary Kinetic and yield parameters for growth and ethanol production from sucrose (100 g/l) bySaccharomyces cerevisia entrapped in K-carrageenan and calcium alginate were identical to those of free cells. Cell leakage was minimum with calcium alginate gel. For the sixth batch, 4.51 g/lh ethanol productivity (94% conversion of sucrose) was obtained; 60.5 g/l of ethanol was obtained from 200 g/l sucrose with 83.2% conversion, indicating inhibition effects.     

Continuous ethanol production by yeast cells immobilized in open pore gelatin matrix

Summary Open pore gelatin pellets with entrapped yeast cells were obtained by selective leaching out of Ca alginate from the composite matrix followed by crosslinking with glutaraldehyde. Saccharomyces uvarum cells immobilized in the porous carrier showed high ethanol productivities with a maximum value of 25 g/l.h when monitored in packed bed reactors at 35°C with continuous cane molasses feedstock containing 10% fermentable sugars.     

Influence of surface characteristics of cellulose carriers on ethanol production by immobilized yeast cells

Ethanol production was carried out by growing yeast cells immobilized on porous cellulose carriers. The effects of the chemical modification of cellulose carriers on cell immobilization and ethanol production were examined with respect to ion-exchange capacity and chemical structure. The ion-exchange capacity of 0·1 meq/g-carriers had no effect on immobilization but affected ethanol production by repeated batch cultures using immobilized yeast cells. Diethylaminoethyl was a suitable function group for immobilization and ethanol production. Ethanol productivity of the 10th batch cycle with diethylaminoethyl cellulose carriers was 23% greater than that of the first batch cycle.     

Continuous ethanol production from pineapple cannery waste using immobilized yeast cells

The cells of Saccharomyces cerevisiae ATCC 24553, were immobilized in k-carrageenan and packed in a tapered glass column reactor for ethanol production from pineapple cannery waste at temperature 30 degrees C and pH 4.5. The maximum productivity was 42.8 g ethanol 1(-1) h(-1) at a dilution rate of 1.5 h(-1). The volumetric ethanol productivity of the immobilized cells was ca. 11.5 times higher than the free cells. The immobilized cell reactor was operated over a period of 87 days at a dilution rate of 1.0 h(-1), without any loss in the immobilized cell activity. The maximum specific ethanol productivity and specific sugar uptake rate of the immobilized cells were 1.2 g ethanol g(-1) dry wt. cell h(-1) and 2.6 g sugar g(-1) dry wt. cell h(-1), respectively, at a dilution rate of 1.5 h(-1).     

Continuous ethanol production by immobilized yeast in a fluidized reactor

Summary In order to minimize the adverse effect of CO₂ gas in a packed bed immobilized yeast reactor, a fluidized bed reactor was used for the continuous production of ethanol from glucose. Immobilized yeast was prepared by entrapping whole cells of Saccharomyces cerevisiae within a Caalginate matrix. It was found that the efficiency of the ethanol production in a fluidized bed reactor was 100% better than that for a packed bed reactor system. The alcohol productivity obtained was 21 g/l/hr in a fluidized bed reactor at 94% of conversion level.     

Continuous production of ethanol in high concentration using immobilized growing yeast cells

Summary Application of an immobilized growing yeast cell system to continuous production of ethanol in high concentration (10%) was investigated using Saccharomyces cerevisiae IFO 2363. When a medium containing 25% glucose was fed, the growth of yeast cells in gel was inhibited. The inhibitory effect was found to be reduced by a stepwise increase in concentration of glucose in the feed medium. The stepwise operation resulted in constant growth of cells in the gel even in the medium containing 25% glucose. By this stepwise feeding system, continuous production of ethanol of 114 mg/ml was maintained at a retention time of 2.6 h for over 2 months and a conversion rate of glucose to ethanol of over 95% of theoretical, was achieved.     

Continuous production of ethanol using yeast cells immobilized in preformed cellulose beads

 Saccharomyces cerevisiae cells were immobilized on preformed cellulose beads by adsorption. The fermentation capacity of the immobilized yeast cells was found to be practically independent of the hydrogen ion concentration between pH 3.1 and 6.25. The fermentation capacity was maximal at 30 °C. The immobilized yeast cells were used for continuous production of ethanol in a fluidized-bead reactor. The average values characteristic for the process were an ethanol concentration of 41.9±0.1 g l^-1, a fermentation efficiency of 82.9±2.1% and a volumetric productivity of 3.94±0.52 g l^-1 h^-1. Received: 9 October 1995/Accepted: 22 April 1996     

Continuous ethanol fermentation using immobilized yeast cells

Growing cells of Saccharomyces cerevisiae immobilized in calcium alginate gel beads were employed in fluidizedbed reactors for continuous ethanol fermentation from cane molasses and other sugar sources. Some improvements were made in order to avoid microbial contamination and keep cell viability for stable long run operations. Notably, entrapment of sterol and unsaturated fatty acid into immobilized gel beads enhanced ethanol productivity more than 50 g ethanol/L gel h and prolonged life stability for more than one-half year. Cell concentration in the carrier was estimated over 250 g dry cell/L gel. A pilot plant with a total column volume of 4 kL was constructed and has been operated since 1982. As a result, it was confirmed that 8-10%(v/v)ethanol-containing broth was continuously produced from nonsterilized diluted cane molasses for over one-half year. The productivity of ethanol was calculated as 0.6 kL ethanol/kL reactor volume day with a 95% conversion yield versus the maximum theoretical yield for the case of 8.5% (v/v) ethanol broth.     

Film fermentor for ethanol production by yeast immobilized on cotton cloth

Summary Saccharomyces cerevisiae cells were immobilized on cotton cloth. The resulting yeast films were placed in parallel in a rectangular fermentor which was designed for scale-up. Ethanol production from sugars in the hydrolysate of Jerusalem artichoke tubers was studied in three modes of operation: batch, circulated batch and continuous flow. Circulated batch fermentation gave the shortest time of fermentation and accordingly the highest average ethanol productivity.     

Continuous ethanol production by yeast immobilized on to channeled alumina beads

Vertical and near-horizontal (15° angle) packed-bed columns were compared for continuous ethanol fermentation using an alcohol- and glucose-tolerant Saccharomyces cerevisiae strain immobilized on to channeled alumina beads (5·0 × 10⁹ cells g⁻¹ beads). Spaces between beads (1·0–6·5 mm) and angle (15°) of near-horizontal reactor columns (with six ports in each) efficiently removed CO₂ and increased ethanol productivity. Malt-glucose-yeast-extract broth containing 16·7% glucose at 35°C fed at a dilution rate of 3· h⁻¹ to thw two horizontal columns (in series) yielded maximum ethanol productivity of 40·0 g liter⁻¹ h⁻¹. Feedstock flow rate and other factors (temperature, pH, nutrients, and glucose levels) affected productivities. The immobilized-cell system showed operational stability for >3 months without plugging, and could be stored for at least one year with no loss of bioreactor performance. Scanning electron micrographs of the beads revealed large numbers of yeast-cells attached on to internal and external surfaces of beads.     

Continuous ethanol production by immobilized cells of Zymomonas mobilis

Summary Studies have been carried out with a highly productive strain of Zymomonas mobilis in an immobilized cell reactor using both Ca alginate and -carrageenan as supporting matrices. Productivities above 50 g/l/h have been found at ethanol concentrations in excess of 60 g/l. With immobilized cells of Z. mobilis, there was a decline of approximately 30s% in activity after 800 h operation.     

Process and technoeconomics of ethanol production by immobilized cells

Summary A two-stage fermentation process has been developed for continuous ethanol production by immobilized cells of Zymomonas mobilis. About 90–92 kg/m³ ethanol was produced after 4 h of residence time. Entrapped cells of Zymomonas mobilis have a capability to convert glucose to ethanol at 93% of the theoretical yield. The immobilized cell system has functioned for several weeks, and experience indicates that the carrageenan gel apparently facilitates easy diffusion of glucose and ethanol.The simplicity and the high productivity of the plug-flow reactor employing immobilized cells makes it economically attrative. An evaluation of process economics of an immobilized cell system indicates that at least 4 c/l of ethanol can be saved using the immobilized cell system rather than the conventional batch system. The high productivity achieved in the immobilized cell reactor results in the requirement for only small reactor vessels indicating low capital cost. Consequently, by switching from batch to immobilized processing, the fixed capital investment is substantially reduced, thus increasing the profitability of ethanol production by fermentation.     

A horizontal bioreactor for ethanol production by immobilized cells

Continuous ethanol production in a three stage horizontal tank bioreactor (HTR) by yeast cells entrapped in Ca-alginate was about 30% higher than in a vertical type of bioreactor and reached 31 kg/(m³ · h) at 95% glucose utilization. Maximum ethanol productivity obtained was 41.2 kg/(m³ · h), however, with 38% of the glucose fed to the HTR being wasted. The higher performance of the HTR had been mainly accounted for the reduction of the adverse CO₂ gas phase effect and the more pronounced plug-flow character. Glucose and ethanol profiles along the HTR revealed that 50–80% of the overall fermentation activity was present in the first stage. Within a test period of 23 d the HTR showed an excellent operational stability.Compared to other continuous ethanol production processes using entrapped yeast cells the HTR presented here belongs to the top ones.     

A horizontal bioreactor for ethanol production by immobilized cells

The one-parameter-tanks-in-series model was found to be an adequate model for the characterization of flow dynamics in a horizontal immobilized cell reactor, when blue dextran was used as tracer. Isobutanol proved to be inadequate, because it diffused inside the beads and thus caused tailing in RTD. The CO₂ evolution rate displayed the most pronounced effect on axial liquid dispersion. At high CO₂ production rates and low dilution rates each stage of the reactor behaved like a well-mixed reactor. At lower CO₂ evolution rates the number of tanks (N) related to the reactor increased up to 10. The medium flow rate affects axial dispersion to a minor degree. An increase of the dilution rate from 0.328 to 1.34 h^?1 resulted in a slight rise of N from 3.5 to 5 at high CO₂ production and from 4 to 7 at medium CO₂ production rates. Variation in the bead hold up showed the same characteristic axial mixing behavior as reflected by changing the medium flow rate. The quantitative correlation between axial mixing and the most significant fermentation parameters (dilution rate, CO₂ evolution rate and bead hold up) allow to develop an overall model, which besides kinetic expressions also contains terms related to the flow dynamics of the reactor. In the third part of this communication such a model will be presented and compared with actual fermentation data.     

A horizontal bioreactor for ethanol production by immobilized cells

A mathematical model which describes ethanol formation in a horizontal tank reactor containing Saccharomyces cerevisiae immobilized in small beads of calcium alginate has been developed. The design equations combine flow dynamics of the reactor as well as product formation kinetics. The model was verified for 11 continuous experiments, where dilution rate, feed glucose concentration and bead volume fraction were varied. The model predicts effluent ethanol concentration and CO₂ production rate within the experimental error. A simplification of the model is possible, when the feed glucose concentration does not exceed 150 kg/m³. The simplification results in an analytical solution of the design equation and hence can easily be applied for design purposes as well as for optimization studies.     

Continuous ethanol production by immobilized yeast reactor coupled with membrane pervaporation unit

A system comprised of an immobilized yeast reactor producing ethanol, with a membrane pervaporation module for continuously removing and concentrating the produced ethanol, was developed. The combined system consisted of two integrated circulation loops: In one the sugar-containing medium is circulated through the membrane pervaporation module. The two loops were interconnected in a way allowing for separate parameter optimization (e.g., flow rate, temperature, pH) for each loop.The fermentation unit was 2.0 L bioreactor with five equal segments, packed with 5-mm beads of immobilized yeasts. The bead matrix was a crosslinked polyacrylamide hydrazide gel coated with calcium alginate. The fast circulation loop of the bioreactor allowed for efficient liberation of CO(2) at the top of the immobilized yeast reactor. Continuous operation of the uncoupled reactor for over 50 days with inflowing defined medium or dilute molasses at a residence time of 1.25 h yielded ethanol at a rate of about 10 g/L h.The pervaporation unit was constructed from four 60-cm-long tubular membranes of silicone composite on a polysulfone support. The output from the fermentor was circulated through the inside of the tubes of a unit with a total surface area of 800 cm(2), having an average flux of 150 mL/h, and selectivities to ethanol vs. water up to 7. A vacuum of 30 mb was applied to the outside of the tubes, removing 20-30 g of ethanol per hour, which was collected in condensors. The continuous removal of ethanol, avoiding inhibition of the fermentation process, resulted in an improved productivity and allowed the use of high sugar concentrations (40% wt/vol) offering the potential of a compact system with reduced stillage.The combined system of ethanol production and removal enabled an operative steady state at which the liquid volume of the system, and the concentrations of ethanol within the reactor ( 4% wt/vol), as well as within the flux crossing the pervaporation membrane (17%-20% wt/vol) were kept constant. At the steady state, a 40% wt/vol sugar solution could be continuously added to the fermentor when 12%-20% wt/vol clear ethanol solution was continuously removed by the pervaporation unit. Membrane fouling was reversed by short washing steps, and continuous step operation was maintained by working with two different modules that were interchanged. In this manner, long term continuous operation (over 40 days) was achieved with a productivity of 20-30 g/L h, representing over a twofold increase relative to the continuously operated reactor uncoupled from the membrane and a fivefold increase in comparison with the value obtained fro a corresponding batch fermentation.     

Ethanol production from whey permeate by immobilized yeast cells

The ability of two yeast strains to utilize the lactose in whey permeate has been studied. Kluyveromyces marxianus NCYC 179 completely utilized the lactose (9.8%), whereas Saccharomyces cerevisiae NCYC 240 displayed an inability to metabolize whey lactose for ethanol production. Of the two gel matrices tested for immobilizing K. marxianus NCYC 179 cells, sodium alginate at 2% (w/v) concentration proved to be the optimum gel for entrapping the yeast cells effectively. The data on optimization of physiological conditions of fermentation (temperature, pH, ethanol concentration and substrate concentration) showed similar effects on immobilized and free cell suspensions of K. marxianus NCYC 179, in batch fermentation. A maximum yield of 42.6 g ethanol l^?1 (82% of theoretical) was obtained from 98 g lactose l^?1 when fermentation was carried at pH 5.5 and 30°C using 120 g dry weight l^?1 cell load of yeast cells. These results suggest that whey lactose can be metabolized effectively for ethanol production using immobilized K. marxianus NCYC 179 cells.     

Acetate addition to an immobilized yeast column of ethanol production

Acetate, a by-product of ethanol fermentation by Saccharomyces cerevisiae, has been shown to inhibit cell growth if present in high concentrations. Consequently, acetate has been considered undesirable in systems where the production rate depends upon steady-state growth. Acetate, however, may be desirable in some systems since it increases the specific rate of ethanol production by increasing the maintenance requirements of yeast. In immobilized cell reactors using the crosslinking method, steady state is not achieved and cell overgrowth is a problem. This article presents the results of a study aimed at taking advantage of the use of acetate, both to reduce cell overgrowth and to increase productivity. Various concentrations of acetate were added to batch and plug flow systems, while monitoring the effects on cell growth and ethanol production. The productivity was increased by as much as 50% in an immobilized cell reactor (ICR), while cell growth was greatly reduced.