Family studies of tooth size factors in the permanent dentition.

Correlations between dimensions of the permanent teeth in Australian Aboriginals were studied by factor analysis to disclose the main sources of shared variability. Findings indicated that in both males and females most of the common variability in the tooth dimensions could be accounted for by factors representing mesiodistal size of anterior teeth, buccolingual size of anterior teeth, generalized size of the premolars and generalized size of the molars. Factor scores derived from the analysis were used to calculate intraclass correlations among brothers and among sisters. These correlations tended to be higher for the factors contributing most to the common variability indicating that the factors might represent fields under direct genetic control. There was no trend for intraclass correlations among siblings derived from multivariate scores to be consistently higher than those based on observed tooth dimensions. The main advantage to the user of factor analysis is the ability to interpret associations between interrelated variables more objectively than is possible by conventional correlation methods.     

Tooth size and arcadal length correlates in man

Intra-arcadal mesiodistal and buccolingual tooth size correlations were evaluated in a sample of 125 caucasoids with ideal occlusion. Dental dimensions were corrected for arcade mength (as a measure of jaw size) by a series of regression analyses of each mesiodistal dimension on the sum of the mesiodistal dimensions within each arcade. Regression coefficients of tooth dimension on arcade length were calculated to gain an insight into the dimensional sensitivity of individual teeth to arcade length variation. The data presented here suggest a strong association between arcadal length (jaw size) dependence, and the dimensional stability of individual teeth. When corrected for arcade length, a definite pattern of tooth size correlation emerges: postcanine maxillary and mandibular teeth are negatively correlated to the anterior teeth and are positively correlated to one another. The hypothesis is developed that anterior and postcanine teeth should be viewed as two separate and negatively size-correlated units, beyond the boundaries of the four morphological tooth classes. Recognition of this basic dichotomous size arrangement within each jaw allows for a reassessment of some of the problems associated with hominid dental evolution.     

Sexual dimorphism in crown units of mandibular deciduous and permanent molars in Australian Aborigines.

Sexual differences in the crown units of mandibular molars were investigated in Australian Aborigines. The first and second deciduous molars (dm1 and dm2), and first to third permanent molars (M1, M2 and M3) were measured on dental casts using a sliding caliper. Measurements of tooth crowns included overall mesiodistal and buccolingual diameters, as well as the mesiodistal and buccolingual diameters of the trigonid and talonid. Percentage dimorphism values were greater in the talonid dimensions than the trigonid, indicating that sex differences tend to be larger in the later-developing crown units. Sex differences in mesiodistal diameters increased from dm1 to M2 but decreased for M3, the tooth that showed the least dimorphism of all the molars. This result seems to be due to the marked variability in size of the M3 between individuals.     

Reduced tooth size in 45,X (Turner syndrome) females

Mean values and variances of deciduous and permanent tooth dimensions were compared between 121 45,X (Turner syndrome) females and 171 control subjects to clarify the role of the X chromosome on dental development. Although deciduous molars tended to be smaller than normal in 45,X females, there was no evidence of a reduction in tooth size for deciduous anterior teeth. In the permanent dentition, all mesiodistal dimensions were significantly smaller in 45,X females but only some of the buccolingual dimensions were smaller. The findings for deciduous tooth-size may reflect a sampling effect related to the extremely high frequency of spontaneous abortion in 45,X individuals. Results for permanent teeth are consistent with the concept of a decrease in enamel thickness in 45,X females.     

A twin study of dental dimension. II. Independent genetic determinants

To demonstrate the presence of independent genetic determinants of multiple correlated tooth dimensions from twin data, a multivariate analysis was performed on the covariance matrices of monozygotic and dizygotic within-pair differences for mesiodistal and buccolingual dimensions of 28 teeth of the secondary dentition. The results provided strong evidences that the correlation among tooth dimensions is primarily genetic in origin, probably attributable to the pleiotropic action of either independent genes or groups of genes. Among the genetic factors that were identified, one appeared to affect the maxillary teeth in general while a second influenced primarily the anterior mandibular teeth. There was a striking tendency for homologous measurements on the right and left sides to be associated with the same genetic factor. In contrast, genetic determination of the maxillary and mandibular dentition seemed to be independent of each other, and a wider range of genetic factors were found to influence the mandibular than the maxillary teeth, suggesting that a differential degree of evolutionary stability may have been achieved in the teeth of the two jaws.     

Crown dimensions of deciduous teeth from prehistoric India

Mean mesiodistal and buccolingual diameters are presented for deciduous teeth from the important Chalcolithic site of Inamgaon (1400–700 B.C.), a prehistoric farming community on the Deccan Plateau of western India. The deciduous teeth from Inamgaon are consistently larger than deciduous teeth of modern populations of European descent and smaller than the deciduous teeth of modern Australian aboriginals. Comparative data for prehistoric deciduous teeth are rare, especially for populations of southern Asia. The deciduous teeth of Mesolithic Europeans are comparable in size to certain dimensions of the Inamgaon teeth, and a small sample of deciduous teeth from the Iron Age site of Pomparippu (Sri Lanka) exhibits larger anterior teeth and smaller molar teeth than does the sample from Inamgaon.     

Evolutionary changes in the masticatory complex following the transition to farming in the southern Levant

A post-Pleistocene reduction trend in the dimensions of the masticatory complex followed the transition to agricultural lifestyle in several world regions. A major limitation of previous studies is large temporal gaps between the analyzed skeletal populations, which do not allow the detection and analysis of a diachronic morphological transition. In this work, we analyze a large number of specimens from the southern Levant, where agriculture first emerged in situ and for which there is a good diachronic sequence of the shift from a hunting-gathering way of life to a food producing, farming economy (12,000-7,000 uncalibrated bp). Changes in the masticatory complex are examined in the context of three prevailing dental reduction models: the Probable Mutation Effect (Brace,1963; Brace and Mahler,1971), Increasing Population Density Effect (Macchiarelli and Bondioli,1986) and Selective Compromise Effect (SCE) (Calcagno,1989). A series of linear regressions of dimension vs. time and coefficients of variation for each dimension are analyzed. Our results indicate significant reduction in the buccolingual but not mesiodistal dental dimensions and in the ramus breadth and anterior height dimensions of the mandible but not in its overall size. These findings, taken together with low coefficients of variation for the buccolingual dimensions, suggest selective pressure resulting in reduction of specific dimensions. The observed trend is in partial accordance with the SCE but differs from the trends observed in other regions, and is therefore best explained as a region-specific variant of the SCE.     

Evolution of dentition in prehistoric Ohio Valley Native Americans III. Metrics of deciduous dentition

Deciduous tooth size in Native Americans of the Ohio Valley area is fairly stable from the terminal Late Archaic (3200 BP) through the Late Prehistoric (350 BP) periods. Some fluctuation in average size did occur during this time. These fluctuations most likely reflect random changes due to gene drift. However, no difference in the pattern of interactions among the sizes of teeth (covariance structures) can be demonstrated during this period. Principal components analysis of the buccolingual and mesiodistal dimensions in the total sample indicate that the major axis of deciduous tooth size in the Ohio Valley population shows an allometric relationship, with the dimensions of the anterior teeth increasing (or decreasing) as the 1.33 power of the dimension of m1(1) and as the 2.0 power of the dimension of m2(2). Comparison of the Ohio Valley samples with other samples from the Eastern Woodlands suggests that geography may have played a minor role in structuring deciduous tooth size variation. For the most part, however, widely separated Eastern Woodlands populations appear to have been evolving independently with respect to deciduous tooth size.     

Studies on agenesis in the permanent dentition

Tooth dimensions in 104 males and females with agenesis of one or more permanent teeth, other than third molars, have been examined. The amounts of size reduction from normal in mesiodistal and buccolingual tooth diameters appear to be independent. Also some apparent differences from normal tooth size variability were noted. Interestingly, first molars and canines, both considered to be stable components of the dentition, showed significant variability in tooth size. In addition the incidence of individual tooth agenesis within this sample was noted and maxillary lateral incisor was most frequently absent in both sexes.     

The assessment of fluctuating odontometric asymmetry from incomplete hominid fossil data

Problems of small sample size and incompleteness of fossil data in the evaluation of metric asymmetry may be overcome by the application of cluster sampling techniques together with factorial analyses of variance. Degrees of fluctuating odontometric asymmetry are reported in Australopithecus, Homo erectus and Homo neanderthalensis. In all three populations mesiodistal dimensions were shown to be more asymmetric than buccolingual dimensions, with maxillary teeth exhibiting significantly greater degrees of asymmetry than mandibular teeth. Neanderthal teeth were significantly more metrically asymmetric than those of either Australopithecus or H. erectus, with population differences in asymmetry centered in the maxillary teeth.     

Metrical dental analysis on golden monkey (Rhinopithecus roxellana)

Dental variation in the Chinese golden monkey (Rhinopithecus roxellana) is here evaluated by univariate, bivariate, and multivariate analyses. Allometric analyses indicate that canines and P3s are positively, but other dimensions negatively scaled to mandible and maxilla, and to body size. With the exception of the mesiodistal dimensions of I₁ and M₃, and the buccolingual dimension of P₄, mandibular dental variables show similar scaling relative to body size. Analysis of residuals shows that males have significantly larger canine, P³ and buccolingual dimensions of the postcanine teeth (M² and M³) than females. A significant difference in shape between the sexes is found in the buccolingual dimension of the upper teeth, but not in the mandible. Unlike the situation in some other species, female golden monkeys do not exhibit relatively larger postcanine teeth than males. In fact, the reverse is true, expecially for M²s and M³s. The fact that most of the dental variables show low negative allometry to body size might be related a cold environment that has led to the development of larger body size with reduced energy loss. When the raw data are examined by Discriminant Function Analysis the sexes are clearly distinguishable.     

Tooth dimensions of Southern Chinese.

Teeth in casts of a random sample from the Hong Kong Oral Health Survey of 12-year-old children (n=459; 295 boys and 164 girls) were measured in the mesiodistal, buccolingual, and clinical crown height dimensions. Sexual dimorphism was evident in all tooth types in nearly all tooth dimensions, with the exception of the mesiodistal dimension of mandibular central incisors. The Chinese male tooth dimensions were larger than in females in nearly all characters. The measurements were compared with other human groups. Results showed that the Southern Chinese had larger tooth dimensions than the Japanese and than the White Americans. Hence it is important to have data concerning a relevant human group for purposes of clinical diagnosis and planning of treatment. These data may also be useful in forensic dentistry.     

The dentition of the Indian Knoll skeletal population: odontometrics and cusp number.

Data on the permanent dentition of 153 individuals from the well known Indian Knoll skeletal population are presented. Mesiodistal and buccolingual measurements were taken with a Helios dial caliper. Cusp number of maxillary and mandibular molars are recorded. The Indian Knoll dentition is larger than many modern groups but smaller than Australoid or Mesolithic groups. With the exception of maxillary 12, males have larger teeth than females in both dimensions. The lower canine is the most dimorphic tooth. Through rank order correlation, an association was shown between the sexual dimorphism of the mesiodistal and buccolingual dimensions. Compared to modern groups, the Indian Knoll population displays a moderate degree of sexual dimorphism in tooth size. In general, the coefficients of variation were greater for the more distal teeth within morphological classes. Amounts of size variability did not differ significantly between the sexes; moreover, rank order correlations indicated that patterns of variability in both dimensions were similar for males and females. The predominant cusp number pattern for upper molars is 4-3-3 and for lowers 5-5(4)-5. No sex differences were shown for cusp occurrence or bilateral asymmetry in cusp number.     

Decreased odontometric sex difference in individuals with dental agenesis

Partial Dental Agenesis has been shown related to decreased mesiodistal tooth size. The sexual difference in permanent tooth size of 104 normal individuals with congenital absence of one or more secondary teeth has been studied. Males are observed to have more mesiodistal size reduction than females. In only two of 14 tooth types examined was a statistical sex difference in mesiodistal size shown. It is of interest that each of these was in the canine field area. A sex difference was slightly more apparent when studying the buccolingual dimension; however, several difficulties were encountered in obtaining measurements in this diameter.     

Molar size sequence in Australian Aboriginals

Percentage frequencies for molar size sequence of first and second molars were calculated in a group of contemporary Australian Aboriginals using mesiodistal and buccolingual dimensions, as well as crown areas. Comparisons were made between sexes, arches, and dimensions within the Aboriginal groups and also between Aboriginal data and those published for other populations. The frequencies of the M2 > M1 molar size sequence in the Aboriginals fell within the range of frequencies reported for other contemporary populations. Differences in the frequencies of the M2 > M1 sequence between the sexes and between arches, together with the relatively high frequency of asymmetry in molar size sequence within Aboriginals, supported the notion that local environmental conditions acting during odontogenesis, together with differential responses to other environmental influences, play an important role in determining observed patterns of molar tooth size.     

Carabelli's trait and tooth size of human maxillary first molars

Carabelli's trait is a morphological feature that can occur on the protocone of human maxillary molars. This study tests the hypothesis that Carabelli's trait is correlated statistically with the dimensions of the crown's four principal cusps or whether, as a cingular feature, the trait truly accretes onto an otherwise unaffected crown. Computer-assisted image analysis was used to measure the 6 intercusp distances and 12 angular relationships among cusp tips on the permanent first molar of 300 young adult American whites. Carabelli's complex was scored using an 8-grade ordinal scheme. Crown size was quantified in three ways, namely as 1) maximum mesiodistal and buccolingual diameters, 2) the 6 intercusp distances, and 3) the 12 angular cusp arrangements. There was no sex difference in the morphological expression of Carabelli's trait in this sample. Overall crown size and intercusp distances were significantly and progressively larger in molars with larger Carabelli's trait expressions. There are graded size responses between crown size (mesiodistal and buccolingual diameters), sizes of the four principal cusps, and morphological stage of Carabelli's complex, though the statistical relationships are appreciably stronger in males than females. Carabelli's trait occurs preferentially in larger molars. In contrast, angular (shape) relationships among cusp tips are not discernibly affected by trait size in either sex. There is the situation, then, that Carabelli's trait is developmentally correlated with crown size, but with no apparent alteration of cusp arrangements, suggesting that the increases are isometric across the occlusal table. Why the association is much weaker in females remains speculative, but these data provide yet another line of evidence that, within a population, tooth size is associated in a positive fashion with crown complexity.     

A comparative study of tooth and dental arch dimensions in Jewish children of different ethnic descent. I. Kurds and Yemenites

Dental casts of 99 Kurdish and 98 Yemenite Jewish children evenly distributed between the sexes, aged 12 years, were measured for mesio-distal and buccolingual tooth dimensions, and arch depth and width. Dental dimensions showed significant differences between the two groups in certain permanent teeth in mesiodistal length, while in the buccolingual diameter the differences did not reach statistical significance. Dental arch form in Kurdish children was more rounded due to significantly bigger arch width, while arch depth was not significantly different from Yemenites. Intragroup sex differences were found in both groups with reference to arch dimensions, while in the dental parameters they were more strongly expressed in Kurdish children.     

The effect of prenatal factors on crown dimensions

As shown in 870 white participants in the National Collaborative Perinatal Project (NCPP), maternal health status during pregnancy and birth size are systematically related to mesiodistal and buccolingual crown dimensions of I1, I2, dc, dm1, dm2 and M1. Maternal diabetes, maternal hypothyroidism and large size at birth are associated with larger maxillary and mandibular teeth in white children. Conversely, deciduous and permanent crown diameters are diminished in maternal hypertension, and in low birthweight and small birth-length conditions. These findings suggest that maternal and fetal (or gestational) determinants of both deciduous and permanent tooth crown dimensions may account for as much as half of crown-size variability with major implications to population comparisons and historical odontometric differences and trends.     

A principal components analysis of human odontometrics

It has long been recognized that tooth crown diameters in hominoids are all positively intercorrelated one with another. This study reports on sex-specific correlation matrices derived from 2,650 individuals from the Solomon Islands, Melanesia. Mesiodistal and buccolingual diameters of all permanent teeth from one side are used, excluding third molars. Analysis discloses significant sex dimorphism in the strengths of the intercorrelations, with females being better integrated. Principal components analysis (PCA) provides an objective means of data reduction (shown here to be preferable to simple size summation methods) and decorrelation of the resulting linear combinations. Four components are extracted (with results being virtually identical in the two sexes) and arguments are put forth that varimax rotation to "a simpler solution" may be counterproductive. Before rotation, the four components are 1) overall size, 2) buccolingual widths contrasted with mesiodistal lengths, 3) anterior (I,C) contrasted with posterior (P,M) teeth, and 4) premolars contrasted with molars. Most of the explained (shared) variance (63%) extracted by PCA is in overall size of the dentition. There is a strong urge to view the results of these principal components analyses as reflective of biologically and genetically meaningful entities.     

Patterns of metric variability in the dentition of Papio ursinus

The present investigation assesses a number of explanations for the patterns of variability in dental dimensions. Coefficients of variation were calculated for mesiodistal and buccolingual diameters in a sample of 105 Papio ursinus crania (52 male, 53 female). Variability profiles consisting of arrays of values of coefficients of variation were evaluated by means of Friedman's two-way analysis of variance and Kendall's coefficient of concordance. Although molar teeth were found to be the most dimensionally stable, our results failed to support either the morphogenetic field theory or the occlusal complexity hypothesis. The data presented here are generally supportive of Pengilly's phenotypic complexity theory. However, speciesspecific clustering patterns found in our regressions of dimensional variability on mean tooth size suggest that differences in variability levels might be related to differences in selective pressures.