Characterization of a mini-F plasmid derived from an F mutant expressing incompatibility in the autonomous but not in the integrated state

Plasmid DNA from Escherichia coli F' ser/MA219 harboring an altered F' factor, which expressed incompatibility in the autonomous but not in the integrated state (DeVries and Maas, 1973, J. Bacteriol. 115, 213-220), was digested with the restriction endonuclease EcoRI and ligated to a nonreplicating trpED fragment. A miniplasmid was obtained containing a 5.7-kb EcoRI fragment capable of self-replication. This plasmid, designated pRE300, was incompatible with mini-F as well as with ColE1 derivatives. It represents a cointegrate formed in vivo between a 2.2-kb segment of the F replication region and a ColE1-type replicon of unknown derivation. The F-derived component of pRE300 corresponds to a minimalized F replicon (43.85-46.05 kb F) retaining oriII and the incB locus but missing the incC and incD functions. It is postulated that the Inc- mutation resulted from the insertion of a transposable DNA sequence into the incC locus of the parent F plasmid.     

Genetic and molecular characterization of the Pseudomonas plasmid pVS1

A restriction map of the 30-kb nonconjugative Pseudomonas plasmid pVS1 was constructed. Derivatives of pVS1 obtained in vitro by successive deletions were used to localize on the physical map the determinant for resistance to mercuric ions (carried by transposon Tn501), the gene(s) encoding sulfonamide resistance, a 1.6-kb region affecting plasmid stability and establishment in P. fluorescens ATCC 13525, and a segment required for mobilization of pVS1 by plasmid RP1. The sulfonamide resistance determinant of pVS1 appeared to be closely related to that of transposon Tn21. A mini-pVS1 replicon, pME259, consisting of an essential 1.55-kb segment (designated rep and thought to carry the origin of replication) and a mercury resistance determinant was able to replicate P. aeruginosa PAO but selective pressure was needed for plasmid maintenance. The copy number of pVS1 derivatives was estimated to be 6-8 per chromosome equivalent. Plasmids possessing the essential rep segment plus the adjacent stability region could be established in strains of P. aeruginosa, P. putida, P. fluorescens, P. acidovorans, P. cepacia, P. mendocina, P. stutzeri, P. syringae, Agrobacterium tumefaciens, and Rhizobium leguminosarum.     

Plasmids isolated from marine sediment microbial communities contain replication and incompatibility regions unrelated to those of known plasmid groups.

Two hundred ninety-seven bacteria carrying plasmids that range in size from 5 to 250 kb were identified from more than 1,000 aerobic heterotrophic bacteria isolated from coastal California marine sediments. While some isolates contained numerous (three to five) small (5- to 10-kb) plasmids, the majority of the natural isolates typically contained one large (40- to 100-kb) plasmid. By the method of plasmid isolation used in this study, the frequency of plasmid incidence ranged from 24 to 28% depending on the samples examined. Diversity of the plasmids occurring in the marine sediment bacterial populations was examined at the molecular level by hybridization with 14 different DNA probes specific for the incompatibility and replication (inc/rep) regions of a number of well-characterized plasmid incompatibility groups (repB/O, FIA, FII, FIB, HI1, HI2, I1, L/M, X, N, P, Q, W, and U). Interestingly, we found no DNA homology between the plasmids isolated from the culturable bacterial population of marine sediments and the replicon probes specific for numerous incompatibility groups developed by Couturier et al. (M. F. Couturier, F. Bex, P. L. Bergquist, and W. K. Maas, Microbiol. Rev. 52:375-395, 1988). Our findings suggest that plasmids in marine sediment microbial communities contain novel, as-yet-uncharacterized, incompatibility and replication regions and that the present replicon typing system, based primarily on plasmids derived from clinical isolates, may not be representative of the plasmid diversity occurring in some marine environments. Since the vast majority of marine bacteria are not culturable under laboratory conditions, we also screened microbial community DNA for the presence of broad- and narrow-host-range plasmid replication sequences. Although the replication origin of the conjugally promiscuous broad-host-range plasmid RK2 (incP) was not detectable in any of the plasmid-containing culturable marine isolates, DNA extracted from the microbial community and amplified by PCR yielded a positive signal for RK2 oriV replication sequences. The strength of the signal suggests the presence of a low level of the incP replicon within the marine microbial community. In contrast, replication sequences specific for the narrow-host-range plasmid F were not detectable in DNA extracted from marine sediment microbial communities. With the possible exception of mercuric chloride, phenotypic analysis of the 297 plasmid-bearing isolates did not demonstrate a correlation between plasmid content and antibiotic or heavy metal resistance traits.     

Analysis of a region in plasmid R386 containing two functional replicons

A miniplasmid has been obtained from R386 by ligating EcoRI fragments with a fragment carrying a kanamycin-resistance gene. It contains a 6.8-kb Eco fragment of R386 which hybridizes strongly with several IncFI plasmid DNAs but not with the primary or secondary replicons of the F plasmid. This mini-R386 is incompatible with certain IncFI plasmids, and it appears to be one example of a previously unidentified replicon widely distributed in the IncFI group. A region of R386 not closely linked to the 6.8-kb fragment is involved in copy number control of the mini-R386, and a sequence in the same region interacts with mini-F partition functions to cause incompatibility. The 6.8-kb fragment also restricts growth of T7 bacteriophage, and an adjacent fragment restricts phage T4 growth. A further R386 sequence, sharing homology with the F secondary replicon, is capable of autonomous replication. Hence R386, like F, contains at least two functional replicons.     

Determination and in vivo characterization of the basic replicon of natural plasmids of Methylomonas clara

The basic replicon of the endogenous Methylomonas clara plasmid pBE-2 and its derivatives was defined to a region of 2.7 kb by in vivo deletions and conjugative transfer experiments using Escherichia coli-M. clara hybrid plasmids. Origin activity was found to be confined to a maximal length of 1.3 kb. The origin consists of two fragments which can be separated more than 4 kb by the integration of foreign DNA fragments without loss of function. A fragment having a maximum size of 2.1 kb supports in trans replication initiation at the origin. In addition, two incompatibility determinants were revealed, one localized in the origin fragment and the other outside the origin. Incompatibility between two basic replicons of the natural M. clara plasmids can be overcome by the integration of one of them in the compatible IncP plasmid R68-Kms. No homology was found between the plasmid basic replicon and the chromosomal DNA of M. clara.     

Identification and cloning of the conjugative transfer region of Staphylococcus aureus plasmid pGO1.

The conjugative transfer (tra) genes of a 52-kilobase (kb) staphylococcal plasmid, pGO1, were localized by deletion analysis and transposon insertional inactivation. All transfer-defective (Tra-) deletions and Tn551 or Tn917 transposon insertions occurred within a 14.5-kb BglII fragment. Deletions and insertions outside this fragment all left the plasmid transfer proficient (Tra+). The tra region was found to be flanked by directly repeated DNA sequences, approximately 900 base pairs in length, at either end. Clones containing the 14.5-kb BglII fragment (pGO200) and subclones from this fragment were constructed in Escherichia coli on shuttle plasmids and introduced into Staphylococcus aureus protoplasts. Protoplasts could not be transformed with pGO200E (pGO200 on the staphylococcal replicon, pE194) or subclones containing DNA at one end of the tra fragment unless pGO1 or specific cloned tra DNA fragments were present in the recipient cell. However, once stabilized by sequences present on a second replicon, each tra fragment could be successfully introduced alone into other plasmid-free S. aureus recipients by conjugative mobilization or transduction. In this manner, two clones containing overlapping fragments comprising the entire 14.5-kb BglII fragment were shown to complement each other. The low-frequency transfer resulted in transconjugants containing one clone intact, deletions of that clone, and recombinants of the two clones. The resulting recombinant plasmid (pGO220), which regenerated the tra region intact on a single replicon, transferred at frequencies comparable to those of pGO1. Thus, all the genes necessary and sufficient for conjugative transfer of pGO1 are contained within a 14.5-kb region of DNA.     

Genetic and physical characterization of recombinant plasmids associated with cell aggregation and high-frequency conjugal transfer in Streptococcus lactis ML3.

Restriction mapping was employed to characterize the 104-kilobase (kb) cointegrate lactose plasmids from 15 independent transconjugants derived from Streptococcus lactis ML3 as well as the 55-kb lactose plasmid ( pSK08 ) and a previously uncharacterized 48.4-kb plasmid ( pRS01 ) from S. lactis ML3. The data revealed that the 104-kb plasmids were cointegrates of pSK08 and pRS01 and were structurally distinct. The replicon fusion event occurred within adjacent 13.8- or 7.3-kb PvuII fragments of pSK08 and interrupted apparently random regions of pRS01 . Correlation of the transconjugants' clumping and conjugal transfer capabilities with the interrupted region of pRS01 identified pRS01 regions coding for these properties. In the 104-kb plasmids, the pRS01 region was present in both orientations with respect to the pSK08 region. The replicon fusion occurred in recombination-deficient (Rec-) strains and appeared to introduce a 0.8 to 1.0-kb segment of DNA within the junction fragments. The degeneration of the cointegrate plasmids was monitored by examining the lactose plasmids from nonclumping derivatives of clumping transconjugants. These plasmids displayed either precise or imprecise excision of pRS01 sequences or had dramatically reduced copy numbers. Both alterations occurred by rec-independent mechanisms. Alterations of a transconjugant 's clumping phenotype also occurred by rec-independent inversion of a 4.3-kb KpnI-PvuII fragment within the pRS01 sequences of the cointegrate plasmid.     

Properties of the streptomycete temperate bacteriophage FP43.

FP43 is a temperate bacteriophage for Streptomyces griseofuscus that forms plaques on many Streptomyces species. FP43 virions contain 56 kb of double-strand DNA that is circularly permuted and terminally redundant, and contains 65% G + C. A physical map of the FP43 genome was constructed, and the origin for headful packaging (pac) was localized to an 8.8-kb region of the genome (hft) that mediates high-frequency transduction by FP43 of plasmid pRHB101. The phage attachment site (attP), a replication origin (rep), a region that inhibits plaque formation (pin), and a 3-kb deletion (rpt) that caused a 100-fold reduction in plasmid transduction were mapped.     

Properties and construction of plasmid pFW213, a shuttle vector with the oral Streptococcus origin of replication

Streptococcus parasanguinis is among the most successful colonizers of the human body. Strain FW213 harbors a 7.0-kb cryptic plasmid, pFW213, with a copy number at 5 to 10 per chromosome. Sequence and functional analyses of pFW213 revealed that the open reading frame (ORF) encoding the replication protein (Rep) is essential for the replication of pFW213, and the putative plasmid addiction system (RelB and RelE) and an ORF (ORF6) with no known function are required for its stability. The minimal replicon of pFW213 contains the rep gene and its 5'-flanking 390-bp region. Within the minimal replicon, an A/T-rich region followed by 5 contiguous 22-bp repeats was located 5' of the ATG of rep. No single-stranded replication intermediates were detected in the derivatives of pFW213, suggesting that pFW213 replicates via the theta replication mechanism. The minimal replicon was unstable in streptococcal hosts without selection, but the stability was greatly enhanced in derivatives containing the intact relBE genes. A Streptococcus-Escherichia coli shuttle vector, pCG1, was constructed with the pFW213 replicon. Plasmid pCG1 features a multiple cloning region and a spectinomycin resistance determinant that is expressed in both Streptococcus spp. and E. coli. Various streptococcal DNA fragments were cloned in pCG1, and the recombinant constructs were stably maintained in the streptococcal hosts. Since pCG1 is compatible with the most widely used streptococcal replicon, pVA380-1, pCG1 will provide a much needed tool allowing the cloning of two genes that work in concert in the same host.     

Molecular characterization of the minimal replicon and the unidirectional theta replication of pSCM201 in extremely halophilic archaea

A 3,463-bp plasmid, pSCM201, was isolated from a halophilic archaeon, Haloarcula sp. strain AS7094. The minimal replicon that is essential and sufficient for autonomous replication and stable maintenance in Haloarcula hispanica was determined by deletion analysis of the plasmid. This minimal replicon ( approximately 1.8 kb) consisted of only two functionally related segments: (i) a putative origin (ori201) containing an AT-rich region and sets of repeats and (ii) an adjacent gene encoding a putative replication initiation protein (Rep201). Electron microscopic observation and Southern blotting analysis demonstrated that pSCM201 replicates via a theta mechanism. Precise mapping of the putative origin suggested that the replication initiated from a fixed site close to the AT-rich region and proceeded unidirectionally toward the downstream rep201 gene, which was further confirmed by electron microscopic analysis of the ClaI-digested replication intermediates. To our knowledge, this is the first unidirectional theta replication plasmid experimentally identified in the domain of archaea. It provides a novel plasmid system to conduct research on archaeal DNA replication.     

The large plasmids found in enterohemorrhagic and enteropathogenic Escherichia coli constitute a related series of transfer-defective Inc F-IIA replicons.

Forty-six of 52 (88.5%) enterohemorrhagic Escherichia coli (EHEC) strains screened carried a "common" plasmid of about 90 kb which encoded sequences homologous to the Inc F-IIA replicon. A similarly high incidence of Inc F-IIA plasmid-containing strains was observed in other groups of diarrheagenic E. coli, but not in random environmental coliform isolates. Enteropathogenic E. coli (EPEC) contain plasmids of similar properties and share a 23-kb DNA fragment with plasmids from EHEC. The common region encodes the F-IIA replication region and sequences homologous to the transfer operon of the Inc F-II plasmid R1. Sequence homology varied between plasmids isolated from different EHEC/EPEC strains with > 80% showing homology to the regions encoding the rep and par genes. Only 5% of plasmids from EHEC strains had intact sequences homologous to the DNA between these two regions, including the oriT site. Some plasmids with an apparently intact tra operon still failed to plaque F-pilus-specific phages. This is consistent with observations that the large plasmids of EHEC and EPEC are phenotypically nonconjugative. These results suggest that the large plasmids of EHEC/EPEC constitute a family of transfer-deficient Inc F-IIA plasmids with varying degrees of deletion in tra function. The evolutionary ramifications of this finding are considered.     

Characterization of a small cryptic plasmid from Salmonella enteritidis that affects the growth of Escherichia coli

Abstract We examined the plasmid content of 25 clinical isolates of Salmonella enteritidis , and detected the presence of small plasmids (3–5.3 kb) in 9 of them, alone, or in addition to the large, so-called virulence plasmid. A 5.3-kb plasmid isolated as unique extrachromosomal DNA from a strain responsible for a high-mortality outbreak was characterized by restriction mapping and cloning. The plasmid replicon was localized in a 1.7-kb fragment, that hybridized with three of the small plasmids detected in S. enteritidis , and with another small plasmid from Salmonella typhimurium . A strain of Escherichia coli carrying this plasmid, or a cloned 3.7-kb Pvu II restriction fragment, showed a slower growth rate, especially in minimal medium, as well as a noticeable increase in DNA methyltransferase activity.     

Characterization of pFR18, a small cryptic plasmid from Leuconostoc mesenteroides ssp. mesenteroides FR52, and its use as a food grade vector

A 1.8-kb cryptic plasmid pFR18 was isolated from Leuconostoc mesenteroides ssp. mesenteroides FR52 and characterized. The identification of single-stranded DNA intermediate (ssDNA) in Leuconostoc demonstrated that the replication of pFR18 is directed by a rolling-circle mechanism (RCR). Sequence analysis revealed a single open reading frame (rep18) encoding a putative 335-amino acid protein homologous to the pT181 replicase. Furthermore, a putative double strand origin similar to that of the pT181 plasmid family was identified. A cloning vector was developed on the basis of the pFR18 replicon by inserting an erythromycin resistance cassette within a non-essential region of the plasmid. The resulting construction was able to transform Lactobacillus sake and various species of Leuconostoc. It was stable in L. mesenteroides, however, the segregational stability of a pFR18 derivative containing large Escherichia coli DNA fragments was affected. Nevertheless, the new RCR plasmid pFR18 may be useful for the construction of food grade vectors.     

Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region,the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60–70% A + T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.     

Plasmid pHH1 of Halobacterium salinarium: characterization of the replicon region, the gas vesicle gene cluster and insertion elements

The DNA sequence of the 5.7 kb plasmid pHH9 containing the replicon region of the 150 kb plasmid pHH1 from Halobacterium salinarium was determined. The minimal region necessary for stable plasmid maintenance lies within a 2.9 kb fragment, as defined by transformation experiments. The DNA sequence contained two open reading frames arranged in opposite orientations, separated by an unusually high AT-rich (60–70% A + T) sequence of 350 bp. All H. salinarium strains (H. halobium, H. cutirubrum) investigated harbour endogenous plasmids containing the pHH1 replicon; however, these pHH1-type plasmids differ by insertions and deletions. Adjacent to the replicon, and separated by a copy of each of the insertion elements ISH27 and ISH26, is the 9 kb p-vac region required for gas vesicle synthesis. Analysis of these and other ISH element copies in pHH1 revealed that most of them lack the target DNA duplication usually found with recently transposed ISH elements. These results underline the plasticity of plasmid pHH1.     

Development and application of molecular tools in the study of IncN-related plasmids from lakewater sediments

Homology to IncN, P, Q and W inc regions was investigated amongst 114 Hg(2+)-resistant or antibiotic-resistant bacteria isolated from lakewater sediments. No hybridisation signals were found with Inc P, Q and W probes, and only one plasmid, pLV1402, hybridised to the IncN probe. PCR primers designed to conserved regions in the replicon of the IncN plasmid pCU1 and the related beta replicon from pGSH500 were used to amplify a 978-bp fragment from pLV1402, with sequence analysis showing a close relationship (99.2% identity) between their replication genes. A 387-bp region from the pLV1402 rep gene was used to re-screen the isolates and identified another related plasmid, pLV1403. A 3.7-kb probe containing the alpha replicon from pGSH500 hybridised to both pLV1402 and pLV1403, suggesting that both are multi-replicon plasmids. The PCR primers and probes described will be useful in future studies of plasmid diversity.     

Isolation of a new broad-host-range IncQ-like plasmid, pTC-F14, from the acidophilic bacterium Acidithiobacillus caldus and analysis of the plasmid replicon

A moderately thermophilic (45 to 50 degrees C), highly acidophilic (pH 1.5 to 2.5), chemolithotrophic Acidithiobacillus caldus strain, f, was isolated from a biooxidation process used to treat nickel ore. Trans-alternating field electrophoresis analysis of total DNA from the A. caldus cells revealed two plasmids of approximately 14 and 45 kb. The 14-kb plasmid, designated pTC-F14, was cloned and shown by replacement of the cloning vector with a kanamycin resistance gene to be capable of autonomous replication in Escherichia coli. Autonomous replication was also demonstrated in Pseudomonas putida and Agrobacterium tumefaciens LBA 4404, which suggested that pTC-F14 is a broad-host-range plasmid. Sequence analysis of the pTC-F14 replicon region revealed five open reading frames and a replicon organization like that of the broad-host-range IncQ plasmids. Three of the open reading frames encoded replication proteins which were most closely related to those of IncQ-like plasmid pTF-FC2 (amino acid sequence identities: RepA, 81%; RepB, 78%; RepC, 74%). However, the two plasmids were fully compatible and pTC-F14 represents a new IncQ-like plasmid replicon. Surprisingly, asymmetrical incompatibility was found with the less closely related IncQ plasmid R300B derivative pKE462 and the IncQ-like plasmid derivative pIE1108. Analysis of the pTC-F14 oriV region revealed five direct repeats consisting of three perfectly conserved 22-bp iterons flanked by iterons of 23 and 21 bp. Plasmid pTC-F14 had a copy number of 12 to 16 copies per chromosome in both E. coli, and A. caldus. The rep gene products of pTC-F14 and pTF-FC2 were unable to functionally complement each other's oriV regions, but replication occurred when the genes for each plasmid's own RepA, RepB, and RepC proteins were provided in trans. Two smaller open reading frames were found between the repB and repA genes of pTC-F14, which encode proteins with high amino acid sequence identity (PasA, 81%; PasB, 72%) to the plasmid addiction system of pTF-FC2. This is the second time a plasmid stability system of this type has been found on an IncQ-like plasmid.     

Identification and characterization of the origin of conjugative transfer (oriT) and a gene (nes) encoding a single-stranded endonuclease on the staphylococcal plasmid pGO1.

The genes mediating the conjugative transfer of the 52-kb staphylococcal plasmid pGO1 are within a 14.4-kb gene cluster designated trs. However, a clone containing trs alone cannot transfer independently and no candidate oriT has been found within or contiguous to trs. In this study, we identified a 1,987-bp open reading frame (ORF) 24 kb 3' and 13 kb 5' to trs that was essential for conjugative transfer: transposon insertions into the ORF abolished transfer and a plasmid containing the ORF could complement these transposon-inactivated pGO1 mutants for transfer. Analysis of the nucleotide sequence of this ORF revealed significant homology between the amino terminus of its predicted protein and those of several single-stranded endonucleases. In addition, a 12-bp DNA sequence located 100 bp 5' to the ORF's translational start site was identical to the oriT sequences of the conjugative or mobilizable plasmids RSF1010, pTF1, R1162, pSC101, and pIP501. The ability of the ORF, designated nes (for nicking enzyme of staphylococci), to generate a single-stranded nick at the oriT was demonstrated in Escherichia coli by alkaline gel and DNA sequence analysis of open circular plasmid DNA. Plasmids that could be converted to the open circular form by the presence of oriT and nes could also be mobilized at high frequency into Staphylococcus aureus recipients with a second plasmid containing only trs. We propose that the 14.4 kb of trs and the approximately 2.2 kb of the oriT-nes region, coupled with an origin of replication, make up the minimal staphylococcal conjugative replicon.     

Molecular structure of the replication origin of a Bacillus subtilis (natto) plasmid, pUH1.

The structure of a 2.0-kb BstEII DNA sequence necessary and sufficient for the replication of a 5.7-kb Natto plasmid, pUH1, which is responsible for gamma-polyglutamate production by Bacillus subtilis (natto), has been characterized by using a trimethoprim resistance gene derived from B. subtilis chromosomal DNA as a selective marker. The 2.0-kb DNA sequence contains an open reading frame, rep, stretching for 999 bp; a promoter region for rep expression; and a possible replication origin for the plasmid upstream of the promotor. The predicted Rep protein has highly homologous amino acid sequences with rep14 of pFTB14 in B. amyloliquefaciens, RepB of pUB110, and protein A, which is necessary for pC194 replication in staphylococci throughout the protein molecule, but is not homologous with RepC of staphylococcal plasmid pT181.