A method for unidirectional deletion mutagenesis with application to nucleotide sequencing and preparation of gene fusions

A method is described for the preparation of deletions that extend in one direction from a fixed point. The method is based on the ability of deoxynucleoside [1-thio]triphosphates to be incorporated into DNA by DNA polymerase I, Klenow fragment, and the fact that alpha-thiophosphate-containing phosphodiester bonds are resistant to hydrolysis by the 3'-to-5' exonucleolytic activity of phage T4 DNA polymerase. Therefore, linear duplex DNA molecules blocked at one 3'-terminus with a thiophosphate were prepared and then degraded from the other end with the exonuclease. Digestion for different lengths of time followed by treatment with nuclease S1 and ligation allowed the preparation and recovery of a nested set of deletion mutants. Importantly, it was observed that a significant fraction of deletion mutants of recombinant M13 phages carrying the target gene in the same orientation as 'lacZ alpha' yielded phage that produced lacZ alpha-complementing activity. Nucleotide (nt) sequencing showed that these phages carried in-frame fusions between the target gene and 'lacZ alpha'. The deletion mutagenesis procedure is applied to the nt sequencing of a gnd gene from a natural isolate of Escherichia coli.     

Kilo-sequencing: an ordered strategy for rapid DNA sequence data acquisition

A strategy for rapid DNA sequence acquisition in an ordered, nonrandom manner, while retaining all of the conveniences of the dideoxy method with M13 transducing phage DNA template, is described. Target DNA 3 to 14 kb in size can be stably carried by our M13 vectors. Suitable targets are stretches of DNA which lack an enzyme recognition site which is unique on our cloning vectors and adjacent to the sequencing primer; current sites that are so useful when lacking are Pst, Xba, HindIII, BglII, EcoRI. By an in vitro procedure, we cut RF DNA once randomly and once specifically, to create thousands of deletions which start at the unique restriction site adjacent to the dideoxy sequencing primer and extend various distances across the target DNA. Phage carrying a desired size of deletions, whose DNA as template will give rise to DNA sequence data in a desired location along the target DNA, may be purified by electrophoresis alive on agarose gels. Phage running in the same location on the agarose gel thus conveniently give rise to nucleotide sequence data from the same kilobase of target DNA.     

The gapped duplex DNA approach to oligonucleotide-directed mutation construction.

A simple and efficient method is described to introduce structurally pre-determined mutations into recombinant genomes of filamentous phage M13. The method rests on gapped duplex DNA (gdDNA) molecules of the phage M13 genome as the key intermediate. In this gdDNA, the (+) and the (shorter) (-) strand carry different genetic markers in such a way, that a rigorous selection can be applied for phage carrying the markers of the (-) strand. For introduction of the mutation, a synthetic oligonucleotide with partial homology to a target site within the single stranded DNA region is annealed to the gdDNA. The oligonucleotide subsequently becomes part of the (-) strand by enzymatic DNA gap filling and sealing. This physical linkage is preserved at the genetic level after transfection of a recipient E.coli strain deficient in DNA mismatch correction, so that the synthetic marker can be selected from the phage progeny independent from its potential phenotype. It is demonstrated that by this method mutants can be constructed with marker yields in excess of 70%.     

Development of a yeast system to assay mutational specificity

We have developed a system wherein DNA alterations occurring in a target gene in the yeast Saccharomyces cerevisiae can be determined by DNA sequencing. The target gene, SUP4-o, an ochre suppressor allele of a yeast tyrosine tRNA gene, has been inserted into a shuttle vector (YCpMP2) which is maintained in yeast at a copy number of one per cell Mutations in SUP4-o are selected by virtue of their inactivation of suppressor activity. Rapid DNA preparations from these mutants are used to transform an appropriate bacterial strain. Since YCpMP2 also carries the M13 phage replication origin, superinfection of bacterial cells containing the plasmid with wild-type M13 phage yields single stranded YCpMP2 DNA suitable for dideoxynucleotide chain termination sequencing. We have used this system to examine mutations arising spontaneously in the SUP4-o gene. The spontaneous mutants occurred at a frequency of 3.2 X 10(-6)/viable cell, corresponding to a rate of 2.7 X 10(-7) events/cell division. Following bacterial transformation, 16% of the recovered plasmids tested displayed altered gel mobility consistent with loss of significant portions of the plasmid. Hybridization analysis of total yeast DNA and use of purified YCpMP2 revealed that these very large deletions were not generated in yeast but were associated with bacterial transformation. Among the SUP4-o mutants analyzed by DNA sequencing, we identified each type of single base pair substitution (transitions and transversions), small deletions of varying length (1-32 base pairs) and more extensive deletions of undetermined size. These results demonstrate that the SUP4-o system can be used to detect various types of mutation at numerous sites in a single eukaryotic gene and to characterize the DNA sequence changes responsible for the mutations selected.     

A vector for sequencing long (40-kb) DNA fragments

An improved vector (pAA113M) has been constructed for sequencing long (40-kb) DNA fragments. The DNA fragment is cloned in the tet gene of the cosmid and subdivided into numerous overlapping segments by IS1-promoted deletions. Plasmids bearing these deletions are fractionated by gel electrophoresis, and shortened further from the opposite end by treatment with specific restriction endonucleases. Thus, a series of short overlapping segments, spread across the entire length of the fragment, become fused to IS1. Each segment can then be sequenced by the dideoxy method using an IS1 primer. The plasmids can replicate either from their normal origin or, in the presence of a filamentous helper phage, from the M13 origin. Hence, each segment can be sequenced as either double-stranded DNA or single-stranded DNA. Sequences of IS1-promoted and restriction enzyme-generated deletions contain overlaps that can be used to assemble the complete 40-kb sequence.     

A new strategy to create ordered deletions for rapid nucleotide sequencing

A method is described for generating ordered deletions using previously published techniques but a new strategy. This method is simpler than the published ones and has many advantages. Target DNA is cloned in both orientations into one of the unique restriction enzyme sites adjacent to the complementary region of the commercially available primers in bacteriophage M13. Ordered unidirectional deletions are created using BAL 31 nuclease and religating into M13 vector DNA without the need of purifying BAL 31-digested DNA from a gel.     

Use of M13mp phages to study gene regulation, structure and function: cloning and recombinational analysis of genes of the Salmonella typhimurium histidine operon

A restriction map was determined for a phi 80 lambda dhis transducing phage DNA carrying the Salmonella typhimurium histidine operon. DNA fragments containing the promoter/regulatory region and the first two structural genes of the histidine operon (hisOGD) were identified by their ability to direct regulated synthesis of histidinol dehydrogenase (product of hisD) in a coupled in vitro protein synthesizing system. A 3.1-kb SalI-EcoRI restriction fragment containing the hisOGD region, was subcloned into phage M13mp8 and M13mp9 RF DNAs. Methods are described for shuttling mutant and wild-type bacterial DNA sequences between the M13mp::his phage and host bacterial genomes. Of novel importance is the use of the phage M13 gene II amber mutation to obtain integration of the M13mp::his phage genome into the homologous his region of the bacterial chromosome following transduction of recipients lacking an amber suppressor. This method can be used to facilitate allele replacement with genes carried on M13 transducing phages.     

A method for introducing random single point deletions in specific DNA target sequences using oligonucleotides.

We describe a method for the generation of random point deletions in any target DNA sequence using synthetic mixed oligonucleotides. A mixed pool of oligonucleotides, which contain single nucleotide deletions randomly distributed throughout the full length, was generated by a modification of the synthesis cycle of an automated DNA synthesiser that allowed the inefficient incorporation of nucleotide monomers during each cycle of synthesis. A family of oligonucleotides was used to prime in vitro synthesis of the complementary strand of a cloned DNA fragment in an M13 vector which had previously been passaged through a dut-, ung- Escherichia coli host. Strong selection for progeny from the newly synthesised strand is provided by transforming the heteroduplex into a dut+, ung+ host. This procedure introduced point deletions at 10-25% efficiency. It has been used to introduce point deletions into operator sequences which bind the yeast regulatory proteins encoded by MATa1 and MAT alpha 2.     

A novel shuttle vector for Streptomyces spp. and Escherichia coli as a tool in site-directed mutagenesis.

This paper describes the construction and utilization of a novel shuttle vector for Streptomyces spp. and Escherichia coli as a useful vector in site-directed mutagenesis. The shuttle vector pIAFS20 (6.7 kb) has the following features: a replicon for Streptomyces spp., isolated from plasmid pIJ702; the thiostrepton-resistance gene as a selective marker in Streptomyces; the ColE1 origin, allowing replication in E. coli; and the ampicillin-resistance gene as a selective marker in E. coli. Vector pIAFS20 also contains the phage f1 intergenic region, which permits production of single-stranded DNA in E. coli after superinfection with helper phage M13K07. Moreover, the lac promoter is located in front of the multiple cloning sites cassette, allowing eventual expression of the cloned genes in E. coli. After mutagenesis and screening of the mutants in E. coli, the plasmids can be readily used to transform Streptomyces spp. As a demonstration, a 3.2-kb DNA fragment containing the gene encoding the xylanase A from Streptomyces lividans 1326 was inserted into pIAFS20, and the promoter region of this gene served as a target for site-directed mutagenesis. The two deletions reported here confirm the efficiency of this new vector as a tool in mutagenesis.     

A simple and efficient method for chemical mutagenesis of DNA.

A simple and efficient procedure for the generation of random GC to AT transition mutations in a specific DNA segment is described. A restriction fragment is inserted in each orientation into an M13 vector, single-stranded virion DNA from each recombinant phage is treated with methoxylamine, and, after reannealing of the mutagenized strands, a double-stranded restriction fragment is obtained. This methoxylamine-derivatized DNA segment is then joined with linearized M13 RF DNA, competent E. coli is transfected, and mutations are directly identified by sequencing of the phage DNA. Using this technique, single and double nucleotide substitutions were generated at a frequency greater than 50% in a 56-base pair segment of the signal codons of the TEM beta-lactamase.     

Cloning vectors that yield high levels of single-stranded DNA for rapid DNA sequencing

We have constructed chimeric plasmid vectors with the origin and intergenic region from M13 phage cloned into the PvuII ( pZ145 ) and AhaIII ( pZ150 , pZ152 ) sites of pBR322. In the absence of M13 phage, these plasmids replicate like any other ColE1-derived plasmid and confer both ampicillin and tetracycline resistance (Amp, Tet). Upon infection with M13 phage, the viral origin present on the plasmids permits phage-directed plasmid replication and results in high yields of single-stranded (ss) plasmid DNA in M13-like particles. This ssDNA, which represents only one of the plasmid strands, is useful as a substrate for rapid DNA sequence determination by the dideoxy sequencing method described by Sanger et al. (1977). Since these plasmids contain an intact pBR322, the intergenic region can be transferred onto most pBR322 derivatives to yield ss plasmid DNA without affecting the recipient plasmid for further studies. We also constructed a deletion derivative of pZ145 , plasmid pZ146 , that does not exhibit interference with the growth of the M13 helper, although this plasmid is encapsidated into phage particles. This result confirms the theory that the intergenic region consists of two domains: one domain being a segment involved in phage morphogenesis and the other being a region of functional origin which interferes with M13 replication.     

M13 vectors for selective cloning of sequences specifying initiation of DNA synthesis on single-stranded templates

M13 cloning vectors have been developed for the selection of DNA sequences capable of directing initiation of DNA synthesis on single-stranded templates. These vectors are derived from viable M13 mutants containing large deletions in the region of the complementary strand origin. The deletion mutants are defective in the conversion of viral single strands to the duplex replicative form (SS leads to RF) both in vivo and in vitro, give a reduced phage yield and form turbid plaques. A receptor site for foreign single strand initiation determinants has been introduced into the mutants by the insertion of EcoRI linker sequences at the deletion sites. Specific cloned sequences from bacteriophage G4 RF and from Co1E1 DNA restore a clear plaque type and normal phage growth. Selection of clear-plaque isolates obtained by transfection with RF from one of these vectors, M13 delta E101, carrying inserted Co1E1 HaeIII fragments resulted in the selective cloning of one specific fragment, the HaeIII-E fragment. Insertion of either the H or L strand of the HaeIII-E fragment into the M13 delta E101 viral strand gives a clear plaque phenotype, indicating the presence of initiation determinants on both the H- and L-strands of the Co1E1 HaeIII-E fragment. These cloning vectors provide a new means for the functional dissection of replication origins and for the identification of DNA sequences that determine the enzymatic mechanism of discontinuous synthesis along the length of the bacterial chromosome. The ability to assess initiation capability on the basis of plaque morphology also provides a means for rapid genetic analysis of initiation determinants.     

Deletion analysis of the DNA sequence required for the in vitro initiation of replication of bacteriophage lambda

Supercoiled DNA containing the replication origin of bacteriophage lambda can be replicated in vitro. This reaction requires purified lambda O and P replication proteins and a partially purified mixture of Escherichia coli proteins (Tsurimoto, T., and Matsubara, K. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 7639-7643; Wold, M. S., Mallory, J.B., Roberts, J. D., LeBowitz, J. H., and McMacken, R. (1982) Proc. Natl. Acad. Sci. U.S.A. 79, 6176-6180). The lambda origin region has four repeats of a 19-base pair sequence to which O protein binds. To the right of these sites on the lambda map is a 40-base pair region that is rich in adenine and thymine, followed by a 28-base pair palindromic sequence. To define more precisely the boundaries of the lambda origin, we cloned a 358-base pair piece of lambda DNA containing the origin region into M13mp8 in both orientations. In vitro replication of RF I DNAs prepared from cells infected with these two M13 ori lambda phage was dependent on lambda O and P proteins and a crude protein fraction from uninfected E. coli; with these conditions there was no replication of M13mp8 RF I DNA. We made deletions from the left and the right ends of the lambda origin DNA and determined the deletion end points by DNA sequencing. We have tested RF I DNAs prepared from cells infected with phage carrying ori lambda deletions for their ability to function as templates for O- and P-dependent replication in vitro. Our results show that lambda DNA between nucleotide positions 39072 and 39160 is required for efficient O- and P-dependent replication. This 89-base pair piece of DNA includes only two of the four 19-base pair O protein-binding sites (the two right-most) and the adjoining adenine- and thymine-rich region to the right of the O-binding sites.     

Isolation and characterization of a DNA primase from human mitochondria

A family of enzymatic activities isolated from human mitochondria is capable of initiating DNA replication on single-stranded templates. The principal enzymes include at least a primase and DNA polymerase gamma and require that rNTPs as well as dNTPs be present in the reaction mixture. Poly(dC) and poly(dT), as well as M13 phage DNA, are excellent templates for the primase activity. A single-stranded DNA containing the cloned origin of mitochondrial light-strand synthesis can be a more efficient template than M13 phage DNA alone. Primase and DNA polymerase activities were separated from each other by sedimentation in a glycerol density gradient. Using M13 phage DNA as template, these mitochondrial enzymes synthesize RNA primers that are 9 to 12 nucleotides in size and are covalently linked to nascent DNA. The formation of primers appears to be the rate-limiting step in the replication process. Replication of M13 DNA is sensitive to N-ethylmaleimide and dideoxynucleoside triphosphates, but insensitive to rifampicin, alpha-amanitin, and aphidicolin.     

Nucleotide sequence and expression in E. coli of a human interferon-alpha gene selected from a genomic library using synthetic oligonucleotides

The complete nucleotide sequence of a human interferon-alpha gene is reported. The gene, designated IFN-alpha M1, was isolated from a human genomic library in phage lambda Charon 4A using synthetic oligonucleotides as hybridization probes. Based on a comparison of nucleotide sequence data obtained from this recombinant phage with published interferon-alpha gene sequences, a region of DNA capable of coding for a pre-interferon of 189 amino acids was identified. An AluI fragment containing the coding region for the mature interferon was inserted into the HincII site of the phage M13mp11, resulting in a fusion of portions of the IFN-alpha M1 and the beta-galactosidase genes. Antiviral activity was detected in extracts from E. coli infected with the recombinant M13 phage carrying the fused gene. The antiviral activity was completely neutralized by antibodies to human interferon-alpha.     

A rapid and efficient method for region- and strand-specific mutagenesis of cloned DNA.

The single-stranded viral DNA of an M13 phage recombinant containing the early promoter region of SV40 was hybridized with linear, double-stranded replicative form DNA of a related M13 phage containing a short deletion in the cloned SV40 sequence. The heteroduplexes formed between these DNA molecules contained a short, defined single-stranded region in an otherwise duplex molecule. These heteroduplexes were treated with sodium bisulphite to deaminate exposed unpaired cytosines to uracil residues. The single-stranded region was filled in with DNA polymerase I, which incorporates adenine opposite the mutated uracils, and the DNA then transfected into the M13 host JM103 . Viral DNA from the resultant plaques was used for the rapid dideoxy-DNA sequencing procedure; all of the plaques studied contained point mutations within the desired area. This method allows the very rapid and efficient generation of region-directed point mutants which can be quickly sequenced.     

Sequence analysis of ultraviolet-induced mutations in M13lacZ hybrid phage DNA

We have studied the specificity of ultraviolet (u.v.) mutagenesis in single-stranded DNA phage by analyzing u.v.-induced forward mutations in the lac insert of M13mp2 hybrid phage. Sequence analysis of 114 lac mutants derived from u.v.-irradiated phage grown in u.v.-irradiated cells showed that ultraviolet induces mainly single-nucleotide substitutions and deletions in progeny phage DNA. A total of 74% of the single-base substitution mutations occurred at sites of adjacent pyrimidines in the single-stranded DNA, with both T----C and C----T transitions predominating in the u.v. spectrum. Single-nucleotide deletion mutations occurred preferentially in tracts of repeated pyrimidine nucleotides. Tandem, double-base substitutions did not represent a major class of u.v.-induced mutations, but nearly 10% of mutant clones contained multiple, non-tandem nucleotide changes.     

Screening recombinant phage M13 plaques with RNA probes; a one-step procedure which identifies clones containing either of the complementary DNA strands

We describe a method for detecting specific DNA sequences cloned in M13 phage vectors, based on the procedure of Woo (in Wu, R., Methods in Enzymology, Vol. 68, Academic Press, New York, 1979, pp. 389-395). M13 plaques are adsorbed to a nitrocellulose filter that has been pre-saturated with bacteria. The filter is incubated on an agar plate to amplify the phage; the DNA is alkali-denatured and then hybridized with a radioactive RNA probe. Unlike standard procedures, this method detects and distinguishes M13 plaques containing phage particles which harbor either the coding or non-coding (RNA-like) DNA strand, when single-stranded RNA is used as probe. We have optimized this procedure with M13 clones containing mouse histidine tRNA gene sequences and have used it to determine the sequence of both strands of a mouse glycine tRNA gene.     

Improved M13 phage cloning vectors and host strains: nucleotide sequences of the M13mp18 and pUC19 vectors

Three kinds of improvements have been introduced into the M13-based cloning systems. (1) New Escherichia coli host strains have been constructed for the E. coli bacteriophage M13 and the high-copy-number pUC-plasmid cloning vectors. Mutations introduced into these strains improve cloning of unmodified DNA and of repetitive sequences. A new suppressorless strain facilitates the cloning of selected recombinants. (2) The complete nucleotide sequences of the M13mp and pUC vectors have been compiled from a number of sources, including the sequencing of selected segments. The M13mp18 sequence is revised to include the G-to-T substitution in its gene II at position 6 125 bp (in M13) or 6967 bp in M13mp18. (3) M13 clones suitable for sequencing have been obtained by a new method of generating unidirectional progressive deletions from the polycloning site using exonucleases HI and VII.