Interfacial gating triad is crucial for electromechanical transduction in voltage-activated potassium channels

Voltage-dependent potassium channels play a crucial role in electrical excitability and cellular signaling by regulating potassium ion flux across membranes. Movement of charged residues in the voltage-sensing domain leads to a series of conformational changes that culminate in channel opening in response to changes in membrane potential. However, the molecular machinery that relays these conformational changes from voltage sensor to the pore is not well understood. Here we use generalized interaction-energy analysis (GIA) to estimate the strength of site-specific interactions between amino acid residues putatively involved in the electromechanical coupling of the voltage sensor and pore in the outwardly rectifying K_V channel. We identified candidate interactors at the interface between the S4–S5 linker and the pore domain using a structure-guided graph theoretical approach that revealed clusters of conserved and closely packed residues. One such cluster, located at the intracellular intersubunit interface, comprises three residues (arginine 394, glutamate 395, and tyrosine 485) that interact with each other. The calculated interaction energies were 3–5 kcal, which is especially notable given that the net free-energy change during activation of the Shaker K_V channel is ∼14 kcal. We find that this triad is delicately maintained by balance of interactions that are responsible for structural integrity of the intersubunit interface while maintaining sufficient flexibility at a critical gating hinge for optimal transmission of force to the pore gate.     

Transfer of ion binding site from ether-à-go-go to Shaker: Mg2+ binds to resting state to modulate channel opening

In ether-à-go-go (eag) K⁺ channels, extracellular divalent cations bind to the resting voltage sensor and thereby slow activation. Two eag-specific acidic residues in S2 and S3b coordinate the bound ion. Residues located at analogous positions are ∼4 Å apart in the x-ray structure of a Kv1.2/Kv2.1 chimera crystallized in the absence of a membrane potential. It is unknown whether these residues remain in proximity in Kv1 channels at negative voltages when the voltage sensor domain is in its resting conformation. To address this issue, we mutated Shaker residues I287 and F324, which correspond to the binding site residues in eag, to aspartate and recorded ionic and gating currents in the presence and absence of extracellular Mg²⁺. In I287D+F324D, Mg²⁺ significantly increased the delay before ionic current activation and slowed channel opening with no readily detectable effect on closing. Because the delay before Shaker opening reflects the initial phase of voltage-dependent activation, the results indicate that Mg²⁺ binds to the voltage sensor in the resting conformation. Supporting this conclusion, Mg²⁺ shifted the voltage dependence and slowed the kinetics of gating charge movement. Both the I287D and F324D mutations were required to modulate channel function. In contrast, E283, a highly conserved residue in S2, was not required for Mg²⁺ binding. Ion binding affected activation by shielding the negatively charged side chains of I287D and F324D. These results show that the engineered divalent cation binding site in Shaker strongly resembles the naturally occurring site in eag. Our data provide a novel, short-range structural constraint for the resting conformation of the Shaker voltage sensor and are valuable for evaluating existing models for the resting state and voltage-dependent conformational changes that occur during activation. Comparing our data to the chimera x-ray structure, we conclude that residues in S2 and S3b remain in proximity throughout voltage-dependent activation.     

ATP-sensitive potassium channels and vascular function

Fluorescence-based approaches provide powerful techniques to directly report structural dynamics underlying gating processes in Shaker K_V channels. Here, following on from work carried out in Shaker channels, we have used voltage clamp fluorimetry for the first time to study voltage sensor motions in mammalian K_V1.5 channels, by attaching TMRM fluorescent probes to substituted cysteine residues in the S3-S4 linker of K_V1.5 (A397C). Compared with the Shaker channel, there are significant differences in the fluorescence signals that occur on activation of the channel. In addition to a well-understood fluorescence quenching signal associated with S4 movement, we have recorded a unique partial recovery of fluorescence after the quenching that is attributable to gating events at the outer pore mouth,¹ that is not seen in Shaker despite significant homology between it and Kv1.5 channels in the S5-P loop-S6 region. Extracellular potassium is known to modulate C-type inactivation in Shaker and K_V channels at sites in the outer pore mouth, and so here we have measured the concentration-dependence of potassium effects on the fluorescence recovery signals from A397C. Elevation of extracellular K⁺ inhibits the rapid fluorescence recovery, with complete abolition at 99 mM K⁺, and an IC₅₀ of 29 mM K⁺_o. These experiments suggest that the rapid fluorescence recovery reflects early gating movements associated with inactivation, modulated by extracellular K⁺, and further support the idea that outer pore motions occur rapidly after K_V1.5 channel opening and can be observed by fluorophores attached to the S3-S4 linker.     

The molecular basis for the actions of KVβ1.2 on the opening and closing of the KV1.2 delayed rectifier channel

Cytosolic K_Vβ1 subunits co-assemble with transmembrane K_V1 channel alpha-subunits and have complex effects on channel function. Fast inactivation, the most obvious effect conferred, is due to fast open channel block resulting from the binding of the N-terminus within the inner mouth of the pore. K_Vβ1 subunits also slow current deactivation, enhance slow inactivation and shift channel activation to more negative voltages, but the mechanisms underlying these actions are not known. Here we use voltage clamp fluorimetry at sites near the extracellular end of the S4 helix, the channel's primary voltage sensor, in combination with voltage clamp electrophysiology, to independently track the movement of the S4 helix along with ionic current, and thus identify the structural and mechanistic means by which the K_Vβ1.2 subunit confers its actions on the K_V1.2 channel. We show that the negative shift in current activation is not due to direct actions of K_Vβ1.2 on the S4 segment. Instead, this shift results from an apparent saturation of channel activation at depolarized potentials as the extent of open channel block by the K_Vβ1.2 N-terminus progressively increases. The return of fluorescence to baseline is slowed along with current deactivation. According to our data, this is due to an inability of the activation gate to close while the Kvbeta1.2 N-terminus occupies the pore and strong coupling of the gate with the S4 segment. Together with data from previous studies, our findings provide a complete and coherent picture of the functional and structural interactions between K_Vβ1.2 and K_V1.2.     

Fast and slow voltage sensor movements in HERG potassium channels

HERG encodes an inwardly-rectifying potassium channel that plays an important role in repolarization of the cardiac action potential. Inward rectification of HERG channels results from rapid and voltage-dependent inactivation gating, combined with very slow activation gating. We asked whether the voltage sensor is implicated in the unusual properties of HERG gating: does the voltage sensor move slowly to account for slow activation and deactivation, or could the voltage sensor move rapidly to account for the rapid kinetics and intrinsic voltage dependence of inactivation? To probe voltage sensor movement, we used a fluorescence technique to examine conformational changes near the positively charged S4 region. Fluorescent probes attached to three different residues on the NH₂-terminal end of the S4 region (E518C, E519C, and L520C) reported both fast and slow voltage-dependent changes in fluorescence. The slow changes in fluorescence correlated strongly with activation gating, suggesting that the slow activation gating of HERG results from slow voltage sensor movement. The fast changes in fluorescence showed voltage dependence and kinetics similar to inactivation gating, though these fluorescence signals were not affected by external tetraethylammonium blockade or mutations that alter inactivation. A working model with two types of voltage sensor movement is proposed as a framework for understanding HERG channel gating and the fluorescence signals.     

Mutations in the S4 region isolate the final voltage-dependent cooperative step in potassium channel activation

Charged residues in the S4 transmembrane segment play a key role in determining the sensitivity of voltage-gated ion channels to changes in voltage across the cell membrane. However, cooperative interactions between subunits also affect the voltage dependence of channel opening, and these interactions can be altered by making substitutions at uncharged residues in the S4 region. We have studied the activation of two mutant Shaker channels that have different S4 amino acid sequences, ILT (V369I, I372L, and S376T) and Shaw S4 (the S4 of Drosophila Shaw substituted into Shaker), and yet have very similar ionic current properties. Both mutations affect cooperativity, making a cooperative transition in the activation pathway rate limiting and shifting it to very positive voltages, but analysis of gating and ionic current recordings reveals that the ILT and Shaw S4 mutant channels have different activation pathways. Analysis of gating currents suggests that the dominant effect of the ILT mutation is to make the final cooperative transition to the open state of the channel rate limiting in an activation pathway that otherwise resembles that of Shaker. The charge movement associated with the final gating transition in ILT activation can be measured as an isolated component of charge movement in the voltage range of channel opening and accounts for 13% ( approximately 1.8 e0) of the total charge moved in the ILT activation pathway. The remainder of the ILT gating charge (87%) moves at negative voltages, where channels do not open, and confirms the presence of Shaker-like conformational changes between closed states in the activation pathway. In contrast to ILT, the activation pathway of Shaw S4 seems to involve a single cooperative charge-moving step between a closed and an open state. We cannot detect any voltage-dependent transitions between closed states for Shaw S4. Restoring basic residues that are missing in Shaw S4 (R1, R2, and K7) rescues charge movement between closed states in the activation pathway, but does not alter the voltage dependence of the rate-limiting transition in activation.     

Structural Implications of Fluorescence Quenching in the Shaker K+ Channel

When attached to specific sites near the S4 segment of the nonconducting (W434F) Shaker potassium channel, the fluorescent probe tetramethylrhodamine maleimide undergoes voltage-dependent changes in intensity that correlate with the movement of the voltage sensor (Mannuzzu, L.M., M.M. Moronne, and E.Y. Isacoff. 1996. Science. 271:213–216; Cha, A., and F. Bezanilla. 1997. Neuron. 19:1127–1140). The characteristics of this voltage-dependent fluorescence quenching are different in a conducting version of the channel with a different pore substitution (T449Y). Blocking the pore of the T449Y construct with either tetraethylammonium or agitoxin removes a fluorescence component that correlates with the voltage dependence but not the kinetics of ionic activation. This pore-mediated modulation of the fluorescence quenching near the S4 segment suggests that the fluorophore is affected by the state of the external pore. In addition, this modulation may reflect conformational changes associated with channel opening that are prevented by tetraethylammonium or agitoxin. Studies of pH titration, collisional quenchers, and anisotropy indicate that fluorophores attached to residues near the S4 segment are constrained by a nearby region of protein. The mechanism of fluorescence quenching near the S4 segment does not involve either reorientation of the fluorophore or a voltage-dependent excitation shift and is different from the quenching mechanism observed at a site near the S2 segment. Taken together, these results suggest that the extracellular portion of the S4 segment resides in an aqueous protein vestibule and is influenced by the state of the external pore.     

Voltage sensor of ion channels and enzymes

Placed in the cell membrane (a two-dimensional environment), ion channels and enzymes are able to sense voltage. How these proteins are able to detect the difference in the voltage across membranes has attracted much attention, and at times, heated debate during the last few years. Sodium, Ca²⁺ and K⁺ voltage-dependent channels have a conserved positively charged transmembrane (S4) segment that moves in response to changes in membrane voltage. In voltage-dependent channels, S4 forms part of a domain that crystallizes as a well-defined structure consisting of the first four transmembrane (S1–S4) segments of the channel-forming protein, which is defined as the voltage sensor domain (VSD). The VSD is tied to a pore domain and VSD movements are allosterically coupled to the pore opening to various degrees, depending on the type of channel. How many charges are moved during channel activation, how much they move, and which are the molecular determinants that mediate the electromechanical coupling between the VSD and the pore domains are some of the questions that we discuss here. The VSD can function, however, as a bona fide proton channel itself, and, furthermore, the VSD can also be a functional part of a voltage-dependent phosphatase.     

Hidden Markov model analysis of intermediate gating steps associated with the pore gate of shaker potassium channels.

Cooperativity among the four subunits helps give rise to the remarkable voltage sensitivity of Shaker potassium channels, whose open probability changes tenfold for a 5-mV change in membrane potential. The cooperativity in these channels is thought to arise from a concerted structural transition as the final step in opening the channel. Recordings of single-channel ionic currents from certain other channel types, as well as our previous recordings from T442S mutant Shaker channels, however, display intermediate conductance levels in addition to the fully open and closed states. These sublevels might represent stepwise, rather than concerted, transitions in the final steps of channel activation. Here, we report a similar fine structure in the closing transitions of Shaker channels lacking the mutation. Describing the deactivation time course with hidden Markov models, we find that two subconductance levels are rapidly traversed during most closing transitions of chimeric, high conductance Shaker channels. The lifetimes of these levels are voltage-dependent, with maximal values of 52 and 22 micros at -100 mV, and the voltage dependences of transitions among these states suggest that they arise from equivalent conformational changes occurring in individual subunits. At least one subconductance level is found to be traversed in normal conductance Shaker channels. We speculate that voltage-dependent conformational changes in the subunits give rise to changes in a "pore gate" associated with the selectivity filter region of the channel, producing the subconductance states. As a control for the hidden Markov analysis, we applied the same procedures to recordings of the recovery from N-type inactivation in Shaker channels. These transitions are found to be instantaneous in comparison.     

Molecular compatibility of the channel gate and the N terminus of S5 segment for voltage-gated channel activity

Voltage-gated ion channels are modular proteins designed by the structural linkage of a voltage sensor and a pore domain. The functional coupling of these two protein modules is a subject of intense research. A major focus has been directed to decipher the role of the S4-S5 linker and the C-end of the inner pore helix in channel gating. However, the contribution of the cytosolic N terminus of S5 remains elusive. To address this issue, we used a chimeric subunit that linked the voltage sensor of the Shaker channel to the prokaryotic KcsA pore domain (denoted as Shaker-KcsA). This chimera preserved the Shaker sequences at both the N terminus of S5 and the C-end of S6. Chimeric Shaker-KcsA subunits did not form functional homomeric channels but were synthesized, folded, and trafficked to the cell surface, as evidenced by their co-assembly with Shaker wild type subunits. Sequential substitution of Shaker amino acids at the C-end of S6 and the N terminus of S5 by the corresponding KcsA created voltage-sensitive channels with voltage-dependent properties that asymptotically approached those of the wild type Shaker channel. Noteworthy, substitution of the region encompassing Phe(401)-Phe(404) at the N-end of Shaker S5 by KcsA residues resulted in a significant gain in voltage sensitivity of the chimeras. Furthermore, analysis of channel function at high [K(+)](o) revealed that the Phe(401)-Phe(404) region is an important molecular determinant for competent coupling of voltage sensing and pore opening. Taken together, these findings indicate that complete replacement of Shaker S5 and S6 by KcsA M1 and M2 is required for voltage-dependent gating of the prokaryotic channel. In addition, our results imply that the region encompassing Phe(401)-Phe(404) in Shaker is involved in protein-protein interactions with the voltage sensor, and signal to the Phe(401) in the S5 segment as a key molecular determinant to pair the voltage sensor and the pore domain.     

Hydrophobic substitution mutations in the S4 sequence alter voltage-dependent gating in Shaker K+ channels

Voltage-activated Na+, Ca2+, and K+ channels contain a common motif, the S4 sequence, characterized by a basic residue at every third position interspersed mainly with hydrophobic residues. The S4 sequence is proposed to function as the voltage sensor and to move in response to membrane depolarization, triggering conformational changes that open the channel. This hypothesis has been tested in previous studies which revealed that mutations of the S4 basic residues often shift the curve of voltage dependence of activation along the voltage axis. We find that comparable or larger shifts are caused by conservative substitutions of hydrophobic residues in the S4 sequence of the Shaker K+ channel. We suggest that the S4 structure plays an essential role in determining the relative stabilities of the closed and open states of the channel.     

Multiscale modeling shows that dielectric differences make NaV channels faster than KV channels

The generation of action potentials in excitable cells requires different activation kinetics of voltage-gated Na (Na_V) and K (K_V) channels. Na_V channels activate much faster and allow the initial Na⁺ influx that generates the depolarizing phase and propagates the signal. Recent experimental results suggest that the molecular basis for this kinetic difference is an amino acid side chain located in the gating pore of the voltage sensor domain, which is a highly conserved isoleucine in K_V channels but an equally highly conserved threonine in Na_V channels. Mutagenesis suggests that the hydrophobicity of this side chain in Shaker K_V channels regulates the energetic barrier that gating charges cross as they move through the gating pore and control the rate of channel opening. We use a multiscale modeling approach to test this hypothesis. We use high-resolution molecular dynamics to study the effect of the mutation on polarization charge within the gating pore. We then incorporate these results in a lower-resolution model of voltage gating to predict the effect of the mutation on the movement of gating charges. The predictions of our hierarchical model are fully consistent with the tested hypothesis, thus suggesting that the faster activation kinetics of Na_V channels comes from a stronger dielectric polarization by threonine (Na_V channel) produced as the first gating charge enters the gating pore compared with isoleucine (K_V channel).     

Voltage-Dependent Gating in a “Voltage Sensor-Less” Ion Channel

The voltage sensitivity of voltage-gated cation channels is primarily attributed to conformational changes of a four transmembrane segment voltage-sensing domain, conserved across many levels of biological complexity. We have identified a remarkable point mutation that confers significant voltage dependence to Kir6.2, a ligand-gated channel that lacks any canonical voltage-sensing domain. Similar to voltage-dependent Kv channels, the Kir6.2[L157E] mutant exhibits time-dependent activation upon membrane depolarization, resulting in an outwardly rectifying current-voltage relationship. This voltage dependence is convergent with the intrinsic ligand-dependent gating mechanisms of Kir6.2, since increasing the membrane PIP₂ content saturates Po and eliminates voltage dependence, whereas voltage activation is more dramatic when channel Po is reduced by application of ATP or poly-lysine. These experiments thus demonstrate an inherent voltage dependence of gating in a “ligand-gated” K⁺ channel, and thereby provide a new view of voltage-dependent gating mechanisms in ion channels. Most interestingly, the voltage- and ligand-dependent gating of Kir6.2[L157E] is highly sensitive to intracellular [K⁺], indicating an interaction between ion permeation and gating. While these two key features of channel function are classically dealt with separately, the results provide a framework for understanding their interaction, which is likely to be a general, if latent, feature of the superfamily of cation channels.     

Coupling between Residues on S4 and S1 Defines the Voltage-Sensor Resting Conformation in NaChBac

The voltage sensor is a four-transmembrane helix bundle (S1-S4) that couples changes in membrane potential to conformational alterations in voltage-gated ion channels leading to pore opening and ion conductance. Although the structure of the voltage sensor in activated potassium channels is available, the conformation of the voltage sensor at rest is still obscure, limiting our understanding of the voltage-sensing mechanism. By employing a heterologously expressed Bacillus halodurans sodium channel (NaChBac), we defined constraints that affect the positioning and depolarization-induced outward motion of the S4 segment. We compared macroscopic currents mediated by NaChBac and mutants in which E43 on the S1 segment and the two outermost arginines (R1 and R2) on S4 were substituted. Neutralization of the negatively charged E43 (E43C) had a significant effect on channel gating. A double-mutant cycle analysis of E43 and R1 or R2 suggested changes in pairing during channel activation, implying that the interaction of E43 with R1 stabilizes the voltage sensor in its closed/available state, whereas interaction of E43 with R2 stabilizes the channel open/unavailable state. These constraints on S4 dynamics that define its stepwise movement upon channel activation and positioning at rest are novel, to the best of our knowledge, and compatible with the helical-screw and electrostatic models of S4 motion.     

Inferred motions of the S3a helix during voltage-dependent K+ channel gating

The gating of voltage-dependent potassium channels is controlled by conformational changes in voltage sensor domains. Previous studies have shown that the S1 and the S2 helices of the voltage sensor are static with respect to motion across the membrane, while the voltage sensor paddle consisting of the C-terminal half of S3 (S3b) and the charge-bearing S4 is mobile. The mobile component is attached to S1 and S2 via the S2-S3 turn and the N-terminal half of S3 (S3a). In this study, we analyze KvAP, an archaebacterial voltage-dependent potassium channel, to study the mobility with respect to translation across the membrane of S3a. We utilize an assay based on attachment of tethered biotin and its site-specific accessibility to avidin. Our results reveal that the S3a helix does not move appreciably across the membrane in association with gating. The static behavior of S3a constrains the conformations available to the voltage sensor when it closes and suggests that a set of negative countercharges within the membrane's inner leaflet remains intact in the closed conformation.     

Deletion of the S3-S4 linker in the Shaker potassium channel reveals two quenching groups near the outside of S4

When attached outside the voltage-sensing S4 segment of the Shaker potassium channel, the fluorescent probe tetramethylrhodamine (TMRM) undergoes voltage-dependent fluorescence changes (DeltaF) due to differential interaction with a pH-titratable external protein-lined vestibule (Cha, A., and F. Bezanilla. 1998. J. Gen. Physiol. 112:391-408.). We attached TMRM at the same sites [corresponding to M356C and A359C in the wild-type (wt) channel] in a deletion mutant of Shaker where all but the five amino acids closest to S4 had been removed from the S3-S4 linker. In the deletion mutant, the maximal DeltaF/F seen was diminished 10-fold, and the DeltaF at M356C became pH independent, suggesting that the protein-lined vestibule is made up in large part by the S3-S4 linker. The residual DeltaF showed that the probe still interacted with two putative quenching groups near the S4 segment. One group was detected by M356C-TMRM (located outside of S3 in the deletion mutant) and reported on deactivation gating charge movement when applying hyperpolarizing voltage steps from a holding potential of 0 mV. During activating voltage steps from a holding potential of -90 mV, the fluorescence lagged considerably behind the movement of gating charge over a range of potentials. Another putative quenching group was seen by probes attached closer to the S4 and caused a DeltaF at extreme hyperpolarizations (more negative than -90 mV) only. A signal from the interaction with this group in the wt S3-S4 linker channel (at L361C) correlated with gating charge moving in the hyperpolarized part of the Q-V curve. Probe attached at A359C in the deletion mutant and at L361C in wt channel showed a biphasic DeltaF as the probe oscillated between the two groups, revealing that there is a transient state of the voltage sensor in between, where the probe has maximal fluorescence. We conclude that the voltage sensor undergoes two distinct conformational changes as seen from probes attached outside the S4 segment.     

Divalent Cations Slow Activation of EAG Family K Channels through Direct Binding to S4

Voltage-gated K⁺ channels share a common voltage sensor domain (VSD) consisting of four transmembrane helices, including a highly mobile S4 helix that contains the major gating charges. Activation of ether-a-go-go (EAG) family K⁺ channels is sensitive to external divalent cations. We show here that divalent cations slow the activation rate of two EAG family channels (Kv12.1 and Kv10.2) by forming a bridge between a residue in the S4 helix and acidic residues in S2. Histidine 328 in the S4 of Kv12.1 favors binding of Zn²⁺ and Cd²⁺, whereas the homologous residue Serine 321 in Kv10.2 contributes to effects of Mg²⁺ and Ni²⁺. This novel finding provides structural constraints for the position of transmembrane VSD helices in closed, ion-bound EAG family channels. Homology models of Kv12.1 and Kv10.2 VSD structures based on a closed-state model of the Shaker family K⁺ channel Kv1.2 match these constraints. Our results suggest close conformational conservation between closed EAG and Shaker family channels, despite large differences in voltage sensitivity, activation rates, and activation thresholds.     

Resin-acid derivatives bind to multiple sites on the voltage-sensor domain of the Shaker potassium channel

Voltage-gated potassium (K_V) channels can be opened by negatively charged resin acids and their derivatives. These resin acids have been proposed to attract the positively charged voltage-sensor helix (S4) toward the extracellular side of the membrane by binding to a pocket located between the lipid-facing extracellular ends of the transmembrane segments S3 and S4. By contrast to this proposed mechanism, neutralization of the top gating charge of the Shaker K_V channel increased resin-acid–induced opening, suggesting other mechanisms and sites of action. Here, we explore the binding of two resin-acid derivatives, Wu50 and Wu161, to the activated/open state of the Shaker K_V channel by a combination of in silico docking, molecular dynamics simulations, and electrophysiology of mutated channels. We identified three potential resin-acid–binding sites around S4: (1) the S3/S4 site previously suggested, in which positively charged residues introduced at the top of S4 are critical to keep the compound bound, (2) a site in the cleft between S4 and the pore domain (S4/pore site), in which a tryptophan at the top of S6 and the top gating charge of S4 keeps the compound bound, and (3) a site located on the extracellular side of the voltage-sensor domain, in a cleft formed by S1–S4 (the top-VSD site). The multiple binding sites around S4 and the anticipated helical-screw motion of the helix during activation make the effect of resin-acid derivatives on channel function intricate. The propensity of a specific resin acid to activate and open a voltage-gated channel likely depends on its exact binding dynamics and the types of interactions it can form with the protein in a state-specific manner.     

Voltage-dependent structural interactions in the Shaker K(+) channel

Using a strategy related to intragenic suppression, we previously obtained evidence for structural interactions in the voltage sensor of Shaker K(+) channels between residues E283 in S2 and R368 and R371 in S4 (Tiwari-Woodruff, S.K., C.T. Schulteis, A.F. Mock, and D. M. Papazian. 1997. Biophys. J. 72:1489-1500). Because R368 and R371 are involved in the conformational changes that accompany voltage-dependent activation, we tested the hypothesis that these S4 residues interact with E283 in S2 in a subset of the conformational states that make up the activation pathway in Shaker channels. First, the location of residue 283 at hyperpolarized and depolarized potentials was inferred by substituting a cysteine at that position and determining its reactivity with hydrophilic, sulfhydryl-specific probes. The results indicate that position 283 reacts with extracellularly applied sulfhydryl reagents with similar rates at both hyperpolarized and depolarized potentials. We conclude that E283 is located near the extracellular surface of the protein in both resting and activated conformations. Second, we studied the functional phenotypes of double charge reversal mutations between positions 283 and 368 and between 283 and 371 to gain insight into the conformations in which these positions approach each other most closely. We found that combining charge reversal mutations at positions 283 and 371 stabilized an activated conformation of the channel, and dramatically slowed transitions into and out of this state. In contrast, charge reversal mutations at positions 283 and 368 stabilized a closed conformation, which by virtue of the inferred position of 368 corresponds to a partially activated (intermediate) closed conformation. From these results, we propose a preliminary model for the rearrangement of structural interactions of the voltage sensor during activation of Shaker K(+) channels.     

Atomic scale structure and functional models of voltage-gated potassium channels.

Recent mutagenesis experiments have confirmed our hypothesis that a segment between S5 and S6 forms the ion selective portion of voltage-gated ion channels. Based on these and other new data, we have revised previous models of the general folding pattern of voltage-gated channel proteins and have developed atomic scale models of the entire transmembrane region of the Shaker A K+ channel. In these models, the ion selective region is a beta-barrel that spans the outer half of the membrane. The inner half of the pore is larger. The voltage-dependent conformational changes of activation gating are modeled to occur by the "helical screw" mechanism, in which the four S4 segments move along and rotate about their axes. These changes are followed by a voltage-independent conformational change, in which the segments linking S4 to S5 move from blocking the intracellular entrance of the pore to forming part of the lining of the large inner portion of the pore. The NH2-terminal of the protein was modeled as an alpha-helix that plugs the intracellular half of the pore to inactivate the channel.