Specific detection of DNA and RNA targets using a novel isothermal nucleic acid amplification assay based on the formation of a three-way junction structure

The formation of DNA three-way junction (3WJ) structures has been utilised to develop a novel isothermal nucleic acid amplification assay (SMART) for the detection of specific DNA or RNA targets. The assay consists of two oligonucleotide probes that hybridise to a specific target sequence and, only then, to each other forming a 3WJ structure. One probe (template for the RNA signal) contains a non-functional single-stranded T7 RNA polymerase promoter sequence. This promoter sequence is made double-stranded (hence functional) by DNA polymerase, allowing T7 RNA polymerase to generate a target-dependent RNA signal which is measured by an enzyme-linked oligosorbent assay (ELOSA). The sequence of the RNA signal is always the same, regardless of the original target sequence. The SMART assay was successfully tested in model systems with several single-stranded synthetic targets, both DNA and RNA. The assay could also detect specific target sequences in both genomic DNA and total RNA from Escherichia coli. It was also possible to generate signal from E.coli samples without prior extraction of nucleic acid, showing that for some targets, sample purification may not be required. The assay is simple to perform and easily adaptable to different targets.     

Enzymatic synthesis of biphenyl-DNA oligonucleotides

The incorporation of nucleotides equipped with C-glycosidic aromatic nucleobases into DNA and RNA is an alluring strategy for a number of practical applications including fluorescent labelling of oligonucleotides, expansion of the genetic alphabet for the generation of aptamers and semi-synthetic organisms, or the modulation of excess electron transfer within DNA. However, the generation of C-nucleoside containing oligonucleotides relies mainly on solid-phase synthesis which is quite labor intensive and restricted to short sequences. Here, we explore the possibility of constructing biphenyl-modified DNA sequences using enzymatic synthesis. The presence of multiple biphenyl-units or biphenyl residues modified with electron donors and acceptors permits the incorporation of a single dBphMP nucleotide. Moreover, templates with multiple abasic sites enable the incorporation of up to two dBphMP nucleotides, while TdT-mediated tailing reactions produce single-stranded DNA oligonucleotides with four biphenyl residues appended at the 3′-end.     

Nucleotide sequence from the genetic left end of bacteriophage T7 DNA to the beginning of gene 4

The nucleotide sequence running from the genetic left end of bacteriophage T7 DNA to within the coding sequence of gene 4 is given, except for the internal coding sequence for the gene 1 protein, which has been determined elsewhere. The sequence presented contains nucleotides 1 to 3342 and 5654 to 12,100 of the approximately 40,000 base-pairs of T7 DNA. This sequence includes: the three strong early promoters and the termination site for Escherichia coli RNA polymerase: eight promoter sites for T7 RNA polymerase; six RNAase III cleavage sites; the primary origin of replication of T7 DNA; the complete coding sequences for 13 previously known T7 proteins, including the anti-restriction protein, protein kinase, DNA ligase, the gene 2 inhibitor of E. coli RNA polymerase, single-strand DNA binding protein, the gene 3 endonuclease, and lysozyme (which is actually an N-acetylmuramyl-l-alanine amidase); the complete coding sequences for eight potential new T7-coded proteins; and two apparently independent initiation sites that produce overlapping polypeptide chains of gene 4 primase. More than 86% of the first 12,100 base-pairs of T7 DNA appear to be devoted to specifying amino acid sequences for T7 proteins, and the arrangement of coding sequences and other genetic elements is very efficient. There is little overlap between coding sequences for different proteins, but junctions between adjacent coding sequences are typically close, the termination codon for one protein often overlapping the initiation codon for the next. For almost half of the potential T7 proteins, the sequence in the messenger RNA that can interact with 16 S ribosomal RNA in initiation of protein synthesis is part of the coding sequence for the preceding protein. The longest non-coding region, about 900 base-pairs, is at the left end of the DNA. The right half of this region contains the strong early promoters for E. coli RNA polymerase and the first RNAase III cleavage site. The left end contains the terminal repetition (nucleotides 1 to 160), followed by a striking array of repeated sequences (nucleotides 175 to 340) that might have some role in packaging the DNA into phage particles, and an A · T-rich region (nucleotides 356 to 492) that contains a promoter for T7 RNA polymerase, and which might function as a replication origin.     

DNA barcoding of sunn pest adult parasitoids using cytochrome c oxidase subunit I (COI)

In this study, DNA barcoding was used in the identification of potential biological control agents of sunn pest adult parasitoid species, including Eliozeta helluo (F.), Phasia subcoleoptrata (L.), Ectophasia crassipennis (F.) and Elomyia lateralis (Meig). DNA analyses were assessed by sequencing cytochrome c oxidase subunit I (COI) gene. The obtained sequences were analyzed in terms of nucleotide composition, nucleotide pair frequency and haplotype diversity. Genetic divergence among haplotypes was estimated by constructing genetic distance matrix using DNA sequence variations, by Kimura 2-parameter model. Variable sites and average variations of the sequenced 603 base pair long DNA fragment were calculated. All COI barcodes were matched with reference sequences of expected species according to morphological identification. Neighbor-joining tree was drawn based on DNA barcodes and all the specimens clustered in agreement with their taxonomic classification at species level. The evolutionary history inferred using the UPGMA method indicated two distinct mitochondrial haplotype lineages. The genetic variation between sunn pest adult parasitoids will be useful in sunn pest management, regulatory and environmental applications.     

Fluorescent Heteroduplex Assay for Monitoring Bacillus anthracis and Close Relatives in Environmental Samples

A fluorescent heteroduplex method was developed to assess the presence of 16S rRNA gene (rDNA) sequences from Bacillus anthracis and close relatives in PCR-amplified 16S rDNA sequence mixtures from environmental samples. The method uses a single-stranded, fluorescent DNA probe, 464 nucleotides in length, derived from a B. anthracis 16S rRNA gene. The probe contains a unique, engineered deletion such that all probe-target duplexes are heteroduplexes with an unpaired G at position 343 (ΔG343). Heteroduplex profiles of sequences ≥85% similar to the probe were produced using an ABI 377 sequencer in less than 3 h. The method divides strains of the Bacillus cereus-Bacillus thuringiensis-B. anthracis group into two subgroups. Each subgroup is defined by a specific 16S rRNA gene sequence type. Sequence type A, containing one mismatch with the probe, occurs in B. anthracis and a small number of closely related clonal lineages represented mostly by food-borne pathogenic isolates of B. cereus and B. thuringiensis. Sequence type B, containing two mismatches with the probe, is found in the majority of B. cereus and B. thuringiensis strains examined to date. Sequence types A and B, when hybridized to the probe, generate two easily differentiated heteroduplexes. Thus, from heteroduplex profiles, the presence of B. cereus-B. thuringiensis-B. anthracis subgroups in environmental samples can be inferred unambiguously. The results show that fluorescent heteroduplex analysis is an effective profiling technique for detection and differentiation of sequences representing small phylogenetic or functional groups in environmental samples.     

Unexpected DNA context-dependence identifies a new determinant of Chi recombination hotspots

Homologous recombination occurs especially frequently near special chromosomal sites called hotspots. In Escherichia coli, Chi hotspots control RecBCD enzyme, a protein machine essential for the major pathway of DNA break-repair and recombination. RecBCD generates recombinogenic single-stranded DNA ends by unwinding DNA and cutting it a few nucleotides to the 3′ side of 5′ GCTGGTGG 3′, the sequence historically equated with Chi. To test if sequence context affects Chi activity, we deep-sequenced the products of a DNA library containing 10 random base-pairs on each side of the Chi sequence and cut by purified RecBCD. We found strongly enhanced cutting at Chi with certain preferred sequences, such as A or G at nucleotides 4–7, on the 3′ flank of the Chi octamer. These sequences also strongly increased Chi hotspot activity in E. coli cells. Our combined enzymatic and genetic results redefine the Chi hotspot sequence, implicate the nuclease domain in Chi recognition, indicate that nicking of one strand at Chi is RecBCD''s biologically important reaction in living cells, and enable more precise analysis of Chi''s role in recombination and genome evolution.     

Exploring the non-coding regions in the mtDNA of some honey bee species and subspecies

The sequence of the DNA contains coding and non-coding regions. The role of the non-coding regions is not known and is hypothesized to maintain the structure of the DNA. This study aimed to investigate the structure of the non-coding sequences in honey bees utilizing bioinformatics. The non-coding sequences of the mtDNA of three honey bee species Apis dorosata, Apis florea, Apis cerana, and ten subspecies of Apis mellifera were investigated. Different techniques were utilized to explore the non-coding regions of these bees including sequence analysis, phylogenetic relationships, enzymatic digestion, and statistical tests. Variations in size and sequences of nucleotides were detected in the studied species and subspecies, but with the same nucleotide abundance (i.e. nucleotides A were more than T and nucleotides G were less than C). The phylogenetic tree based on the non-coding regions was partially similar to the known phylogenetic relationships between these bees. The enzymatic digestion using four restriction enzymes confirmed the results of the phylogenetic relationships. The statistical analysis based on numerical codes for nucleotides showed the absence of significant variations between the studied bees in their sequences in a similar way to results of neutrality tests. This study suggests that the non-coding regions have the same functional role in all the studied bees regardless of the number of nucleotides, and not just to maintain the structure of the DNA. This is approximately the first study to shade lights on the non-coding regions of the mtDNA of honey bees.     

The primary structure of the human ϵ-globin gene

We describe the complete nucleotide sequence of the human ?-globin gene including 387 nucleotides of 5′ flanking sequence and 301 nucleotides of 3′ flanking sequence. The arrangement of coding, noncoding and intervening sequences in this gene is entirely consistent with its identification as the embryonic β-like globin gene.     

Analysis of FBJ-MuSV provirus and c-fos (mouse) gene reveals that viral and cellular fos gene products have different carboxy termini

The complete nucleotide sequence of the FBJ-MuSV proviral DNA and the cellular homolog (c-fos) of its oncogene (v-fos) have been determined. The 4026 nucleotide long FBJ-MuSV proviral DNA contains two long terminal repeats, a substitution of 1639 nucleotides of mouse cellular DNA (v-fos) and the 3′ end of the env gene derived from FBJ-MuLV. The sequences of the parental FBJ-MuLV and the cellular c-fos (mouse) gene share five of five nucleotides at the 5′ end and ten of 11 nucleotides at the 3′ end of the v-fos substitution. When compared with the v-fos sequences, the c-fos gene contains four discontinuous regions, three of which are flanked by sequences characteristic of introns. Direct sequence analysis of c-fos (mouse) RNA by primer extension demonstrates that the fourth discontinuity is due to a 104 bp deletion in the v-fos gene. As a consequence of the deletion, the predicted v-fos and c-fos gene products differ at their C termini.     

Express hybridization of molecular colonies with fluorescent probes

DNA colonies formed during PCR in a polyacrylamide gel and RNA colonies grown in an agarose gel containing Qβ replicase can be identified using the procedure of transfer of molecular colonies onto a nylon membrane followed by membrane hybridization with fluorescent oligonucleotide probes. The suggested improvements significantly simplify and shorten the procedure. By the example of a chimeric AML1-ETO sequence, a marker of frequently occurring leukemia, the express hybridization method was shown to allow the rapid identification of single molecules and the determination of titers of DNA and RNA targets. Hybridization with a mixture of two oligonucleotide probes labeled with different fluorophores complementary to components of the chimeric molecule ensures the identification of molecular colonies containing both parts of the chimeric sequence and improves the specificity of diagnostics.     

Characterization and evaluation of tandem repeats for the identification of Geobacillus

Taxonomy of thermophilic, endospore-forming bacteria has evoked a great interest over the past few years. Although a number of taxonomic markers were previously evaluated, their sequences in Geobacillus were too conservative, and identification of more variable markers is needed. Repetitive DNA is one of the promising variable targets in the development of the taxon-specific genotyping and identification schemes in bacteria. The aim of our study was to evaluate the possibility of using repetitive DNA in the taxonomy of Geobacillus. In this paper, we report the analysis of perfect tandem repeats of geobacilli. We focused on the long repeats (with a motif length of ≥20 nucleotides). This choice was based on the assumption that these motifs can be used for the construction of oligonucleotides — primers and probes. Thirty-three Geobacillus genus-specific motifs were identified in our work, fifteen of them were species-specific and fifteen — species cluster -specific. Three of them were genus-, but not species- or species cluster-specific. Some of the motifs were used for the construction of the primer pairs. The primers were validated by PCR. Out of 12 designed primer pairs, 11 were genus-specific and 4 — species-specific. Species-specific primers were successfully constructed for the phylogenetically defined species Geobacillus thermodenitrificans and Geobacillus toebii.     

DNA microarrays with stem–loop DNA probes: preparation and applications

We have developed DNA microarrays containing stem–loop DNA probes with short single-stranded overhangs immobilized on a Packard HydroGel chip, a 3-dimensional porous gel substrate. Microarrays were fabricated by immobilizing self-complementary single-stranded oligonucleotides, which adopt a partially duplex structure upon denaturing and re-annealing. Hybridization of single-stranded DNA targets to such arrays is enhanced by contiguous stacking interactions with stem–loop probes and is highly sequence specific. Subsequent enzymatic ligation of the targets to the probes followed by stringent washing further enhances the mismatched base discrimination. We demonstrate here that these microarrays provide excellent specificity with signal-to-background ratios of from 10- to 300-fold. In a comparative study, we demonstrated that HydroGel arrays display 10–30 times higher hybridization signals than some solid surface DNA microarrays. Using Sanger sequencing reactions, we have also developed a method for preparing nested 3′-deletion sets from a target and evaluated the use of stem–loop DNA arrays for detecting p53 mutations in the deletion set. The stem–loop DNA array format is simple, robust and flexible in design, thus it is potentially useful in various DNA diagnostic tests.     

Optimization of Single-Base-Pair Mismatch Discrimination in Oligonucleotide Microarrays

The discrimination between perfect-match and single-base-pair-mismatched nucleic acid duplexes was investigated by using oligonucleotide DNA microarrays and nonequilibrium dissociation rates (melting profiles). DNA and RNA versions of two synthetic targets corresponding to the 16S rRNA sequences of Staphylococcus epidermidis (38 nucleotides) and Nitrosomonas eutropha (39 nucleotides) were hybridized to perfect-match probes (18-mer and 19-mer) and to a set of probes having all possible single-base-pair mismatches. The melting profiles of all probe-target duplexes were determined in parallel by using an imposed temperature step gradient. We derived an optimum wash temperature for each probe and target by using a simple formula to calculate a discrimination index for each temperature of the step gradient. This optimum corresponded to the output of an independent analysis using a customized neural network program. These results together provide an experimental and analytical framework for optimizing mismatch discrimination among all probes on a DNA microarray.     

Single nucleotide polymorphism discrimination assisted by improved base stacking hybridization using oligonucleotide microarrays

Efficiencies of mismatch discrimination using size-varied capture probes were examined at various hybridization temperatures. The probes were 17, 15, 13, 11, 9, and 7 nucleotides long and contained single-base mismatches at their 3' ends. The optimal signal intensity and efficiency of base stacking hybridization on mismatch discrimination were observed for capture probes with a melting temperature (Tm) value of 36 degrees C, in the detection of DNA sequence variations at 40 degrees C. We employed asymmetric PCR to prepare single-stranded target DNA labeled with a fluorescent dye, and the PCR product was hybridized on the DNA microarray with no further purification. Our efforts have enhanced the sensitivity and simplified the procedures of base stacking hybridization on mismatch discrimination. As a model experiment, this improved technology was used to identify plasmid templates of human leukocyte antigen (HLA)-A alleles 2601, 2902, and 0206 on oligonucleotide microarrays. It is now possible to apply this simple, rapid, sensitive, and reliable base stacking hybridization technology to detect DNA sequence variations on microarrays in clinical diagnosis and other applications.     

Molecular identification and phylogenetic relationship of green algae,Spirogyra ellipsospora (Chlorophyta) using ISSR and rbcL markers

Spirogyra is found in a wide range of habitats, including small stagnant water bodies, rivers, and streams. Spirogyra ellipsospora is common in northern Thailand. Species identification of the Spirogyra species based only on morphological characteristics can be difficult. A reliable and accurate method is required to evaluate genetic variations. This study aims to apply molecular approaches for the identification of S. ellipsospora using microsatellites and rbcL markers. Based on DNA sequencing, the rbcL gene was sequenced and the data was analyzed using the BLAST (Basic Local Alignment Search Tool) program in the NCBI (National Center for Biotechnology Information) database. The sequence of S. ellipsospora from this study revealed definitive identity matches in the range of 99% for the consensus sequences of S. ellipsospora. The 10 primers of ISSR could be amplified by 92 amplification fragments. The DNA fragments and the rbcL sequence data grouped the Spirogyra specimens into two distinct clusters.     

3'-minor groove binder-DNA probes increase sequence specificity at PCR extension temperatures

DNA probes with conjugated minor groove binder (MGB) groups form extremely stable duplexes with single-stranded DNA targets, allowing shorter probes to be used for hybridization based assays. In this paper, sequence specificity of 3′-MGB probes was explored. In comparison with unmodified DNA, MGB probes had higher melting temperature (T_m) and increased specificity, especially when a mismatch was in the MGB region of the duplex. To exploit these properties, fluorogenic MGB probes were prepared and investigated in the 5′-nuclease PCR assay (real-time PCR assay, TaqMan assay). A 12mer MGB probe had the same T_m (65°C) as a no-MGB 27mer probe. The fluorogenic MGB probes were more specific for single base mismatches and fluorescence quenching was more efficient, giving increased sensitivity. A/T rich duplexes were stabilized more than G/C rich duplexes, thereby leveling probe T_m and simplifying design. In summary, MGB probes were more sequence specific than standard DNA probes, especially for single base mismatches at elevated hybridization temperatures.     

Relaxase DNA Binding and Cleavage Are Two Distinguishable Steps in Conjugative DNA Processing That Involve Different Sequence Elements of the nic Site

TrwC, the relaxase of plasmid R388, catalyzes a series of concerted DNA cleavage and strand transfer reactions on a specific site (nic) of its origin of transfer (oriT). nic contains the cleavage site and an adjacent inverted repeat (IR₂). Mutation analysis in the nic region indicated that recognition of the IR₂ proximal arm and the nucleotides located between IR₂ and the cleavage site were essential for supercoiled DNA processing, as judged either by in vitro nic cleavage or by mobilization of a plasmid containing oriT. Formation of the IR₂ cruciform and recognition of the distal IR₂ arm and loop were not necessary for these reactions to take place. On the other hand, IR₂ was not involved in TrwC single-stranded DNA processing in vitro. For single-stranded DNA nic cleavage, TrwC recognized a sequence embracing six nucleotides upstream of the cleavage site and two nucleotides downstream. This suggests that TrwC DNA binding and cleavage are two distinguishable steps in conjugative DNA processing and that different sequence elements are recognized by TrwC in each step. IR₂-proximal arm recognition was crucial for the initial supercoiled DNA binding. Subsequent recognition of the adjacent single-stranded DNA binding site was required to position the cleavage site in the active center of the protein so that the nic cleavage reaction could take place.     

Novel fluorescent protein from Hydnophora rigida possess cyano emission

Currently, a broad diversity of fluorescent proteins among marine organisms range from cyano-red emissions. Fluorescent proteins differ in their DNA sequences from green fluorescent protein (GFP). We identified cDNA encoding the gene of a new protein from the reef coral Hydnophora rigida of the Merulinidae family. Both the spectral properties and putative primary sequence of the protein has been determined. The cloned cDNA encode peptide we call HriCFP is comprised of 134 amino acids. It has characteristics of a cyano fluorescent protein (HriCFP) and its sequence is markedly different from known GFP from the hydroid jellyfish Aequorea victoria. HriCFP was cloned, expressed, purified and exist as monomer. The peptide mass finger print on the purified protein confirmed identity of HriCFP.     

A unique DNA repair and recombination gene (recN) sequence for identification and intraspecific molecular typing of bacterial wilt pathogen Ralstonia solanacearum and its comparative analysis with ribosomal DNA sequences

Ribosomal gene sequences are a popular choice for identification of bacterial species and, often, for making phylogenetic interpretations. Although very popular, the sequences of 16S rDNA and 16-23S intergenic sequences often fail to differentiate closely related species of bacteria. The availability of complete genome sequences of bacteria, in the recent years, has accelerated the search for new genome targets for phylogenetic interpretations. The recently published full genome data of nine strains of R. solanacearum, which causes bacterial wilt of crop plants, has provided enormous genomic choices for phylogenetic analysis in this globally important plant pathogen. We have compared a gene candidate recN, which codes for DNA repair and recombination function, with 16S rDNA/16-23S intergenic ribosomal gene sequences for identification and intraspecific phylogenetic interpretations in R. solanacearum. recN gene sequence analysis of R. solanacearum revealed subgroups within phylotypes (or newly proposed species within plant pathogenic genus, Ralstonia), indicating its usefulness for intraspecific genotyping. The taxonomic discriminatory power of recN gene sequence was found to be superior to ribosomal DNA sequences. In all, the recN-sequence-based phylogenetic tree generated with the Bayesian model depicted 21 haplotypes against 15 and 13 haplotypes obtained with 16S rDNA and 16-23S rDNA intergenic sequences, respectively. Besides this, we have observed high percentage of polymorphic sites (S 23.04%), high rate of mutations (Eta 276) and high codon bias index (CBI 0.60), which makes the recN an ideal gene candidate for intraspecific molecular typing of this important plant pathogen.