Enzymatic polymerization catalyzed by immobilized endoglucanase on gold

Enzymatic polymerization was carried out on gold by immobilized genetically engineered endoglucanase II (EGII) from Trichoderma viride , and the polymerization behavior and the produced cellulose were analyzed in comparison with those by free enzymes. Mutant EGIIs were EGII(core2) and EGII(core2H), which consist of two sequential catalytic core domains with one His-tag (His6) on N-terminal and with totally two His-tags on both terminals, respectively. His-tagged EGIIs were immobilized via Ni chelators of nitrilotriacetic acid (NTA) introduced on gold surface. From SPR measurements, the affinity of EGII(core2H) to the surface was higher than that of EGII(core2), and the molecular occupation area of EGII(core2H) was larger than that of EGII(core2), indicating that EGII(core2H) was immobilized with utilizing two His-tags introduced on both terminals. The hydrolytic activity of the immobilized EGII(core2H) using cellohexaose as substrate was slightly lower than that of free EGII(core2H) when they were compared at the same amount in the hydrolytic system. Enzymatic polymerization catalyzed by both immobilized EGII(core2) and EGII(core2H) proceeded with producing highly crystalline cellulose in comparison with free enzyme. Immobilization of the endoglucanase is thus effective to obtain crystalline cellulose due to the high density of the catalytic domain on gold.     

Evaluation of minimal Trichoderma reesei cellulase mixtures on differently pretreated Barley straw substrates

The commercial cellulase product Celluclast 1.5, derived from Trichoderma reesei (Novozymes A/S, Bagsvaerd, Denmark), is widely employed for hydrolysis of lignocellulosic biomass feedstocks. This enzyme preparation contains a broad spectrum of cellulolytic enzyme activities, most notably cellobiohydrolases (CBHs) and endo-1,4-beta-glucanases (EGs). Since the original T. reesei strain was isolated from decaying canvas, the T. reesei CBH and EG activities might be present in suboptimal ratios for hydrolysis of pretreated lignocellulosic substrates. We employed statistically designed combinations of the four main activities of Celluclast 1.5, CBHI, CBHII, EGI, and EGII, to identify the optimal glucose-releasing combination of these four enzymes to degrade barley straw substrates subjected to three different pretreatments. The data signified that EGII activity is not required for efficient lignocellulose hydrolysis when addition of this activity occurs at the expense of the remaining three activities. The optimal ratios of the remaining three enzymes were similar for the two pretreated barley samples that had been subjeced to different hot water pretreatments, but the relative levels of EGI and CBHII activities required in the enzyme mixture for optimal hydrolysis of the acid-impregnated, steam-exploded barley straw substrate were somewhat different from those required for the other two substrates. The optimal ratios of the cellulolytic activities in all cases differed from that of the cellulases secreted by T. reesei. Hence, the data indicate the feasibility of designing minimal enzyme mixtures for pretreated lignocellulosic biomass by careful combination of monocomponent enzymes. This strategy can promote both a more efficient enzymatic hydrolysis of (ligno)cellulose and a more rational utilization of enzymes.     

Characterization of commercial cellulases and their use in the saccharification of a sugarcane bagasse sample pretreated with dilute sulfuric acid

This study aimed to correlate the efficiency of enzymatic hydrolysis of the cellulose contained in a sugarcane bagasse sample pretreated with dilute H₂SO₄ with the levels of independent variables such as initial content of solids and loadings of enzymes and surfactant (Tween 20), for two cellulolytic commercial preparations. The preparations, designated cellulase I and cellulase II, were characterized regarding the activities of total cellulases, endoglucanase, cellobiohydrolase, cellobiase, β-glucosidase, xylanase, and phenoloxidases (laccase, manganese and lignin peroxidases), as well as protein contents. Both extracts showed complete cellulolytic complexes and considerable activities of xylanases, without activities of phenoloxidases. For the enzymatic hydrolyses, two 2³ central composite full factorial designs were employed to evaluate the effects caused by the initial content of solids (1.19–4.81%, w/w) and loadings of enzymes (1.9–38.1 FPU/g bagasse) and Tween 20 (0.0–0.1 g/g bagasse) on the cellulose digestibility. Within 24 h of enzymatic hydrolysis, all three independent variables influenced the conversion of cellulose by cellulase I. Using cellulase II, only enzyme and surfactant loadings showed significant effects on cellulose conversion. An additional experiment demonstrated the possibility of increasing the initial content of solids to values much higher than 4.81% (w/w) without compromising the efficiency of cellulose conversion, consequently improving the glucose concentration in the hydrolysate.     

Features of Fibrobacter intestinalis DR7 mutant which is impaired with its ability to adhere to cellulose

A spontaneous adhesion-defective mutant (DR7-M) of Fibrobacter intestinalis DR7 was isolated which was capable of growing on glucose and cellobiose, but impaired in its capacity to degrade cellulose. Levels of enzyme activities were determined in solubilized fractions of DR7 and DR7-M. Total endoglucanases and xylanase activity values of parent DR7 fractions were 2.84 and 1.85 folds higher than those of the mutant, and were distributed mainly in the bacterial envelope fractions, with some activity also found in the extracellular fluid. In a separate assay, measurement of the enzymatic activity bound to cellulose showed that a portion of the endoglucanase activity bound to cellulose while most xylanase activity did not bind. Notwithstanding, the wild type DR7 cells had 26-fold higher total activities of cellulose-degrading enzymes than the mutant, and 96% of its activity was exclusively located in outer membrane and periplasm fractions. In the mutant, the lower cellulose degrading enzymes activity was located only in the extracellular fluid. Most of the cellulose degrading enzymes activity of DR7 had the capability to bind to cellulose. SDS-page electrophoresis of outer membrane and periplasm cell fractions showed that DR7 and DR7-M possess similar molecular weight (MW) profiles but different quantities of 16 cellulose-binding-proteins (CBPs) in the MW range of 36 up to 225 kDa. Zymogram analysis with soluble substrates, either carboxymethylcellulose or soluble xylan, following SDS-page of DR7 and DR7-M fractions, suggested that CBPs of approximate MW 120, 110, 100, 90, 70 and 40 kDa have endoglucanase activity, and that CBPs of all fractions lack any xylanase activity.     

Site-directed mutation of noncatalytic residues of Thermobifida fusca exocellulase Cel6B.

Fifteen mutant genes in six loop residues and eight mutant genes in five conserved noncatalytic active site residues of Thermobifida fusca Cel6B were constructed, cloned and expressed in Escherichia coli or Streptomyces lividans. The mutant enzymes were assayed for catalytic activity on carboxymethyl cellulose (CMC), swollen cellulose (SC), filter paper (FP), and bacterial microcrystalline cellulose (BMCC) as well as cellotetraose, cellopentaose, and 2, 4-dinitrophenyl-beta-D-cellobioside. They were also assayed for ligand binding, enzyme processivity, thermostability, and cellobiose feedback inhibition. Two double Cys mutations that formed disulfide bonds across two tunnel forming loops were found to significantly weaken binding to ligands, lower all activities, and processivity, demonstrating that the movement of these loops is important but not essential for Cel6B function. Two single mutant enzymes, G234S and G284P, had higher activity on SC and FP, and the double mutant enzyme had threefold and twofold higher activity on these substrates, respectively. However, synergism with endocellulase T. fusca Cel5A was not increased with these mutant enzymes. All mutant enzymes with lower activity on filter paper, BMCC, and SC had lower processivity. This trend was not true for CMC, suggesting that processivity in Cel6B is a key factor in the hydrolysis of insoluble and crystalline cellulose. Three mutations (E495D, H326A and W329C) located near putative glycosyl substrate subsites -2, +1 and +2, were found to significantly increase resistance to cellobiose feedback inhibition. Both the A229V and L230C mutations specifically decreased activity on BMCC, suggesting that BMCC hydrolysis has a different rate limiting step than the other substrates. Most of the mutant enzymes had reduced thermostability although Cel6B G234S maintained wild-type thermostability. The properties of the different mutant enzymes provide insight into the catalytic mechanism of Cel6B.     

Improvement of cellulose-degrading ability of a yeast strain displaying Trichoderma reesei endoglucanase II by recombination of cellulose-binding domains

To improve the cellulolytic activity of a yeast strain displaying endoglucanase II (EGII) from the filamentous fungus Trichoderma reesei QM9414, the genes encoding the cellulose-binding domain (CBD) of EGII, cellobiohydrolase I (CBHI) and cellobiohydrolase II (CBHII) from T. reesei QM9414, were fused with the catalytic domain of EGII and expressed in Saccharomyces cerevisiae. Display of each of the recombinant EGIIs was confirmed using immunofluorescence microscopy. In the case of EGII-displaying yeast strains in which the CBD of EGII was replaced with the CBD of CBHI or CBHII, the binding affinity to Avicel and hydrolytic activity toward phosphoric acid swollen Avicel were similar to that of a yeast strain displaying wild-type EGII. On the other hand, the three yeast strains displaying EGII with two or three tandemly aligned CBDs showed binding affinity and hydrolytic activity higher than that of the yeast strain displaying wild-type EGII. This result indicates that the hydrolytic activity of yeast strains displaying recombinant EGII increases with increased binding ability to cellulose.     

Kinetics of cellobiose hydrolysis using cellobiase composites from Ttrichoderma reesei and Aspergillus niger

The enzymatic hydrolysis of cellulose to glucose involves the formation of cellobiose as an intermediate. It has been found necessary(1) to add cellobiase from Aspergillus niger (NOVO) to the cellobiase component of Trichoderma reesei mutant Rut C-30 (Natick) cellulase enzymes in order to obtain after 48 h complete conversion of the cellobiose formed in the enzymatic hydrolysis of biomass. This study of the cellobiase activity of these two enzyme sources was undertaken as a first step in the formation of a kinetic model for cellulose hydrolysis that can be used in process design. In order to cover the full range of cellobiose concentrations, it was necessary to develop separate kinetic parameters for high- and low-concentration ranges of cellobiose for the enzymes from each organism. Competitive glucose inhibition was observed with the enzymes from both organisms. Substrate inhibition was observed only with the A. niger enzymes.     

Cellulosic ethanol production by combination of cellulase-displaying yeast cells

As an effort to find suitable endoglucanases to generate cellulolytic yeast strains, two fungal endoglucanases, Thermoascus aurantiacus EGI and Trichoderma reesei EGII, and two bacterial endoglucanases, Clostridium thermocellum CelA and CelD, were expressed on the yeast surface, and their surface expression levels, pH- and temperature-dependent enzyme activities, and substrate specificities were analyzed. T. aurantiacus EGI showed similar patterns of pH- and temperature-dependent activities to those of T. reesei EGII which has been widely used due to its high enzyme activity. Although EGII showed higher carboxymethyl cellulose (CMC) degradation activity than EGI, EGI showed better activity toward phosphoric acid swollen cellulose (PASC). For ethanol production from PASC, we combined three types of yeast cells, each displaying T. aurantiacus EGI, T. reesei CBHII (exoglucanase) and Aspergillus aculeatus BGLI (β-glucosidase), instead of co-expressing these enzymes in a single cell. In this system, ethanol production can be easily optimized by adjusting the combination ratio of each cell type. A mixture of cells with the optimized EGI:CBHII:BGLI ratio of 6:2:1 produced 1.3 fold more ethanol (2.1 g/l) than cells composed of an equal amount of each cell type, suggesting the usefulness of this system for cellulosic ethanol production.     

Pulp properties and their influence on enzymatic degradability

Endoglucanase treatment of pulp for the adjustment of viscosity and the increase in pulp reactivity is a promising step in the concept for the beneficial production of dissolving pulps from paper grade pulps. To promote the commercial applicability of these enzymes, the influence of pulp properties such as carbohydrate composition, pulp type and cellulose morphology on the enzymatic degradability of a pulp was examined. High contents of hemicelluloses and lignin were shown to impair the accessibility of the cellulose to the enzymes. Due to the elevated swelling capacity of cellulose II, conversion of the cellulose morphology from I to II upon alkaline treatments showed a large increasing effect on the cellulose accessibility, and enzymatic degradability. Reactivity measurements of softwood sulfite pulps after enzymatic degradation and acid-catalyzed hydrolysis, respectively, revealed elevated reactivity for the pulp after acid treatment. This is in contrast to effects of enzyme treatments reported for CCE treated kraft pulps.     

Structural comparison and enhanced enzymatic hydrolysis of the cellulosic preparation from Populus tomentosa Carr., by different cellulose-soluble solvent systems

This study aims to establish an efficient pretreatment process using cellulose-dissolution solvents to enhance the enzymatic saccharification. LiOH/urea, LiCl/DMAc, concentrated phosphoric acid, ionic liquid (1-butyl-3-methylimidazolium chloride; [BMIM]Cl) and N-methyl-morpholine-N-oxide (NMMO) were selected as the cellulose dissolution agents. Except the cellulosic sample regenerated from LiCl/DMAc system, all the other treated samples exhibited lower cellulose crystallinity and degree of polymerization (DP), and consequently, exhibited a significant enhancement on enzymatic hydrolysis kinetic. Ionic liquid pretreatment offered unique advantages in the hydrolysis rate in the first 10 h, probably due to the extensively structural transformation of cellulose from the crystalline to the amorphous region. Meanwhile, the regenerated cellulose from concentrated phosphoric acid almost completely consisted of cellulose II, and achieved the highest saccharification yield.     

Characterization of the DNA-binding domain and identification of the active site residue in the 'Gyr A' half of Leishmania donovani topoisomerase II

DNA topoisomerase II is a multidomain homodimeric enzyme that changes DNA topology by coupling ATP hydrolysis to the transport of one DNA helix through a transient double-stranded break in another. To investigate the biochemical properties of the individual domains of Leishmania donovani topoisomerase II, four truncation mutants were generated. Deletion of 178 aminoacids from the C-terminus (core and LdΔC1058) had no apparent effect on the DNA-binding or cleavage activities of the enzymes. However, when 429 aminoacids from the N-terminus and 451 aminoacids from the C-terminus were removed (LdΔNΔC), the enzyme was no longer active. Moreover, the removal of 429 aminoacids from the N-terminus (LdΔNΔC, core and LdΔN429) render the mutant proteins incapable of performing ATP hydrolysis. The mutant proteins show cleavage activities at wide range of KCl concentrations (25–350 mM). In addition, the mutant proteins, excepting LdΔNΔC, can also act on kDNA and linearize the minicircles. Surprisingly, the mutant proteins fail to show the formation of the enhanced cleavable complex in the presence of etoposide. Our findings suggest that the conformation required for interaction with the drug is absent in the mutant proteins. Here, we have also identified Tyr⁷⁷⁵ through direct sequencing of the DNA linked peptide as the catalytic residue implicated in DNA-breakage and rejoining. Taken together, our results demonstrate that topoisomerase II are functionally and mechanistically conserved enzymes and the variations in activity seem to reflect functional optimization for its physiological role during parasite genome replication.     

The cellulosome and cellulose degradation by anaerobic bacteria

Despite its simple chemical composition, cellulose exists in a number of crystalline and amorphous topologies. Its insolubility and heterogeneity makes native cellulose a recalcitrant substrate for enzymatic hydrolysis. Microorganisms meet this challenge with the aid of a multi-enzyme system. Aerobic bacteria produce numerous individual, extra-cellular enzymes with binding modules for different cellulose conformations. Specific enzymes act in synergy to elicit effective hydrolysis. In contrast, anaerobic bacteria possess a unique extracellular multi-enzyme complex, called cellulosome. Up to 11 different enzymes are aligned on the non-catalytic scaffolding protein and thus ensure a high local concentration, together with the correct ratio and order of the components. These multi-enzyme complexes attach both to the cell envelope and to the substrate, mediating the proximity of the cells to the cellulose. Binding to the scaffolding stimulates the activity of each individual component towards the crystalline substrate. The most complex and best investigated cellulosome is that of the thermophilic bacterium Clostridium thermocellum, but a scheme for the cellulosomes of the mesophilic clostridia and the ruminococci emerges. Many crucial details of cellulose hydrolysis are still to be uncovered. Yet, a mechanistic model for the action of enzyme complexes on the surface of insoluble substrates becomes apparent and the application of enzymatic hydrolysis of cellulosic biomass can now be addressed.     

A mechanistic model for enzymatic saccharification of cellulose using continuous distribution kinetics II: cooperative enzyme action, solution kinetics, and product inhibition

The projected cost for the enzymatic hydrolysis of cellulosic biomass continues to be a barrier for the commercial production of liquid transportation fuels from renewable feedstocks. Predictive models for the kinetics of the enzymatic reactions will enable an improved understanding of current limitations, such as the slow-down of the overall conversion rate, and may point the way for more efficient utilization of the enzymes in order to achieve higher conversion yields. A mechanistically based kinetic model for the enzymatic hydrolysis of cellulose was recently reported in Griggs et al. (2011) (Part I). In this article (Part II), the enzyme system is expanded to include solution-phase kinetics, particularly cellobiose-to-glucose conversion by β-glucosidase (βG), and novel adsorption and product inhibition schemes have been incorporated, based on current structural knowledge of the component enzymes. Model results show cases of cooperative and non-cooperative hydrolysis for an enzyme system consisting of EG(I) and CBH(I). The model is used to explore various potential rate-limiting phenomena, such as substrate accessibility, product inhibition, sterically hindered enzyme adsorption, and the molecular weight of the cellulose substrate.     

Recycle of enzymes and substrate following enzymatic hydrolysis of steam-pretreated aspenwood

The commercial production of chemicals and fuels from lignocellulosic residues by enzymatic means still requires considerable research on both the technical and economic aspects. Two technical problems that have been identified as requiring further research are the recycle of the enzymes used in hydrolysis and the reuse of the re calcitrant cellulose remaining after incomplete hydrolysis. Enzyme recycle is required to lower the cost of the enzymes, while the reuse of the spent cellulose will lower the feedstock cost. The conversion process studied was a combined enzymatic hydrolysis and fermentation (CHF) procedure that utilized the cellulolytic enzymes derived from the fungus Trichoderma harzianum E58 and the yeast Saccharomyces cerevisiae. The rate and extent of hydrolysis and ethanol production was monitored as was the activity and hydrolytic potential of the enzymes remaining in the filtrate after the hydrolysis period. When a commercial cellulose was used as the substrate for a routine 2-day CHF process, 60% of the original treated, water-extracted aspenwood was used as the substrate, only 13% of the original filter paper activity was detected after a similar procedure. The combination of 60% spent enzymes with 40% fresh enzymes resulted in the production of 30% less reducing sugars than the original enzyme mixture. Since 100% hydrolysis of the cellulose portion is seldom accomplished in an enzymatic hydrolysis pro cess, the residual cellulose was used as a substrate for the growth of T. harzianum E58 and production of celulolytic enzymes. The residue remaining after the CHF process was used as a substrate for the production of the cellulolytic enzymes. The production of enzymes from the residue of the Solka Floc hydrolysis was greater than the production of enzymes from the original Solka Floc.     

X-ray Structure and Molecular Dynamics Simulations of Endoglucanase 3 from Trichoderma harzianum: Structural Organization and Substrate Recognition by Endoglucanases That Lack Cellulose Binding Module

Plant biomass holds a promise for the production of second-generation ethanol via enzymatic hydrolysis, but its utilization as a biofuel resource is currently limited to a large extent by the cost and low efficiency of the cellulolytic enzymes. Considerable efforts have been dedicated to elucidate the mechanisms of the enzymatic process. It is well known that most cellulases possess a catalytic core domain and a carbohydrate binding module (CBM), without which the enzymatic activity can be drastically reduced. However, Cel12A members of the glycosyl hydrolases family 12 (GHF12) do not bear a CBM and yet are able to hydrolyze amorphous cellulose quite efficiently. Here, we use X-ray crystallography and molecular dynamics simulations to unravel the molecular basis underlying the catalytic capability of endoglucanase 3 from Trichoderma harzianum (ThEG3), a member of the GHF12 enzymes that lacks a CBM. A comparative analysis with the Cellulomonas fimi CBM identifies important residues mediating interactions of EG3s with amorphous regions of the cellulose. For instance, three aromatic residues constitute a harboring wall of hydrophobic contacts with the substrate in both ThEG3 and CfCBM structures. Moreover, residues at the entrance of the active site cleft of ThEG3 are identified, which might hydrogen bond to the substrate. We advocate that the ThEG3 residues Asn152 and Glu201 interact with the substrate similarly to the corresponding CfCBM residues Asn81 and Arg75. Altogether, these results show that CBM motifs are incorporated within the ThEG3 catalytic domain and suggest that the enzymatic efficiency is associated with the length and position of the substrate chain, being higher when the substrate interact with the aromatic residues at the entrance of the cleft and the catalytic triad. Our results provide guidelines for rational protein engineering aiming to improve interactions of GHF12 enzymes with cellulosic substrates.     

酶法制备功能性纤维低聚糖的研究

研究里氏木霉(Trichoderma reesei)Rut C30纤维素酶单一组分EGI、EGII和CBHI降解纤维素的机理及纤维低聚糖酶法制备技术,进而初步研究纤维低聚糖对青春双歧杆菌的增殖作用。以内切葡聚糖酶EGII酶法制备纤维低聚糖,每克纤维素最佳酶用量1 U,最佳酶解时间90 min,制备得到的纤维低聚糖中纤维二糖、纤维三糖和纤维四糖占总糖的比例分别为43.8%、34.8%和7.9%。以纤维二糖、纤维低聚糖为C源增殖青春双歧杆菌,菌体质量浓度增殖倍数分别为2.14、2.84。     

Adsorption of Trichoderma reesei CBH I and EG II and their catalytic domains on steam pretreated softwood and isolated lignin

The presence of lignin has shown to play an important role in the enzymatic degradation of softwood. The adsorption of enzymes, and their constituent functional domains on the lignocellulosic material is of key importance to fundamental knowledge of enzymatic hydrolysis. In this study, we compared the adsorption of two purified cellulases from Trichoderma reesei, CBH I (Cel7A) and EG II (Cel5A) and their catalytic domains on steam pretreated softwood (SPS) and lignin using tritium labeled enzymes. Both CBH I and its catalytic domain exhibited a higher affinity to SPS than EG II or its catalytic domain. Removal of cellulose binding domain decreased markedly the binding efficiency. Significant amounts of CBH I and EG II also bound to isolated lignin. Surprisingly, the catalytic domains of the two enzymes of T. reesei differed essentially in the adsorption to isolated lignin. The catalytic domain of EG II was able to adsorb to alkaline isolated lignin with a high affinity, whereas the catalytic domain of CBH I did not adsorb to any of the lignins tested. The results indicate that the cellulose binding domain has a significant role in the unspecific binding of cellulases to lignin.     

Restriction of the enzymatic hydrolysis of steam-pretreated spruce by lignin and hemicellulose

The presence of lignin is known to reduce the efficiency of the enzymatic hydrolysis of lignocellulosic raw materials. On the other hand, solubilization of hemicellulose, especially of xylan, is known to enhance the hydrolysis of cellulose. The enzymatic hydrolysis of spruce, recognized among the most challenging lignocellulosic substrates, was studied by commercial and purified enzymes from Trichoderma reesei. Previously, the enzymatic hydrolysis of steam pretreated spruce has been studied mainly by using commercial enzymes and no efforts have been taken to clarify the bottlenecks by using purified enzyme components.Steam-pretreated spruce was hydrolyzed with a mixture of Celluclast and Novozym 188 to obtain a hydrolysis residue, expectedly containing the most resistant components. The pretreated raw material and the hydrolysis residue were analyzed for the enrichment of structural bottlenecks during the hydrolysis. Lignin was removed from these two materials with chlorite delignification method in order to eliminate the limitations caused by lignin. Avicel was used for comparison as a known model substrate. Mixtures of purified enzymes were used to investigate the hydrolysis of the individual carbohydrates: cellulose, glucomannan and xylan in the substrates. The results reveal that factors limiting the hydrolysis are mainly due to the lignin, and to a minor extent by the lack of accessory enzymes. Removal of lignin doubled the hydrolysis degree of the raw material and the residue, and reached close to 100% of the theoretical within 2 days. The presence of xylan seems to limit the hydrolysability, especially of the delignified substrates. The hydrolysis results also revealed significant hemicellulose impurities in the commonly used cellulose model substrate, making it questionable to use Avicel as a model cellulose substrate for hydrolysis experiments.     

Inhibition of enzymatic hydrolysis by residual lignins from softwood--study of enzyme binding and inactivation on lignin-rich surface

Lignin-derived inhibition is a major obstacle restricting the enzymatic hydrolysis of cell wall polysaccharides especially with softwood lignocellulosics. Enzyme adsorption on lignin is suggested to contribute to the inhibitory effect of lignin. The interaction of cellulases with softwood lignin was studied in the present work with commercial Trichoderma reesei cellulases (Celluclast) and lignin-rich residues isolated from steam pretreated softwood (SPS) by enzymatic and acid hydrolysis. Both lignin preparations inhibited the hydrolysis of microcrystalline cellulose (Avicel) and adsorbed the major cellulases present in the commercial cellulase mixture. The adsorption phenomenon was studied at low temperature (4°C) and at the typical hydrolysis temperature (45°C) by following activities of free and lignin-bound enzymes. Severe inactivation of the lignin-bound enzymes was observed at 45°C, however at 4°C the enzymes retained well their activity. Furthermore, SDS-PAGE analysis of the lignin-bound enzymes indicated that very strong interactions form between the residue and the enzymes at 45°C, because the enzymes were not released from the residue in the electrophoresis. These results suggest that heat-induced denaturation may take place on the surface of softwood lignin at the hydrolysis temperature.     

Changes in the enzymatic hydrolysis rate of Avicel cellulose with conversion

The slow down in enzymatic hydrolysis of cellulose with conversion has often been attributed to declining reactivity of the substrate as the more easily reacted material is thought to be consumed preferentially. To better understand the cause of this phenomenon, the enzymatic reaction of the nearly pure cellulose in Avicel was interrupted over the course of nearly complete hydrolysis. Then, the solids were treated with proteinase to degrade the cellulase enzymes remaining on the solid surface, followed by proteinase inhibitors to inactive the proteinase and successive washing with water, 1.0 M NaCl solution, and water. Next, fresh cellulase and buffer were added to the solids to restart hydrolysis. The rate of cellulose hydrolysis, expressed as a percent of substrate remaining at that time, was approximately constant over a wide range of conversions for restart experiments but declined continually with conversion for uninterrupted hydrolysis. Furthermore, the cellulose hydrolysis rate per adsorbed enzyme was approximately constant for the restart procedure but declined with conversion when enzymes were left to react. Thus, the drop off in reaction rate for uninterrupted cellulose digestion by enzymes could not be attributed to changes in substrate reactivity, suggesting that other effects such as enzymes getting "stuck" or otherwise slowing down may be responsible.